diff --git a/cmake_targets/autotests/README.txt b/cmake_targets/autotests/README.txt
index 2a1b57c0b236cdfc223021d43dee3f55049cc3ba..cf0e972b088385ff00e27ff02fd035de9a655e4a 100644
--- a/cmake_targets/autotests/README.txt
+++ b/cmake_targets/autotests/README.txt
@@ -218,7 +218,7 @@ Obj.# Case# Test# Description
01 70 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
-01 75 00 lte-softmodem + RRH tests with B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
+01 75 00 lte-softmodem + RRU (NGFI IF4P5, RAW) tests with B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 75 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 75 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 75 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
@@ -226,7 +226,7 @@ Obj.# Case# Test# Description
01 75 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 75 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
-01 80 00 lte-softmodem + RRH tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
+01 80 00 lte-softmodem + RRU (NGFI) tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 80 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 80 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 80 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
@@ -234,7 +234,7 @@ Obj.# Case# Test# Description
01 80 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 80 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
-01 85 00 lte-softmodem + RRH tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
+01 85 00 lte-softmodem + RRU (NGFI) tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 85 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 85 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 85 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
diff --git a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
index 796235a77f767f01932396f9fc1366f1cf28bb30..ba54fa38b33f7fcc381d429fd36f50dc59854183 100755
--- a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
+++ b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
@@ -575,6 +575,7 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
tags = testcase.findtext('tags',default='')
RRHMachine = testcase.findtext('RRH',default='')
+ RRH_config_file = testcase.findtext('RRH_config_file',default='')
RRH_compile_prog = testcase.findtext('RRH_compile_prog',default='')
RRH_compile_prog_args = testcase.findtext('RRH_compile_prog_args',default='')
RRH_pre_exec = testcase.findtext('RRH_pre_exec',default='')
@@ -710,6 +711,7 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
task_RRH_compile = ' ( uname -a ; date \n'
task_RRH_compile = task_RRH_compile + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n'
task_RRH_compile = task_RRH_compile + 'env |grep OPENAIR \n'
+ task_RRH_compile = task_RRH_compile + update_config_file(oai_RRH, RRH_config_file, logdirOAI5GRepo, '$OPENAIR_DIR/cmake_targets/autotests/tools/search_repl.py') + '\n'
if RRH_compile_prog != "":
task_RRH_compile = task_RRH_compile + ' ( ' + RRH_compile_prog + ' '+ RRH_compile_prog_args + ' ) > ' + logfile_compile_RRH + ' 2>&1 \n'
task_RRH_compile = task_RRH_compile + ' date ) > ' + logfile_task_RRH_compile_out + ' 2>&1 '
diff --git a/cmake_targets/autotests/test_case_list.xml b/cmake_targets/autotests/test_case_list.xml
index f882ea7ee81223dd2f89e08433d5d68e00d20315..3d9e7f19e6a9196086cd88905fc53a3d6c6ffc10 100644
--- a/cmake_targets/autotests/test_case_list.xml
+++ b/cmake_targets/autotests/test_case_list.xml
@@ -1,7 +1,7 @@
<testCaseList>
-<MachineList>mozart hutch starsky stevens amerique calisson nano </MachineList>
+<MachineList>amerique mozart hutch starsky stevens calisson nano superserver </MachineList>
<NFSResultsShare>/mnt/sradio/TEST_RESULTS/</NFSResultsShare>
<GitOAI5GRepo>https://gitlab.eurecom.fr/oai/openairinterface5g.git</GitOAI5GRepo>
<GitOpenair-cnRepo>https://gitlab.eurecom.fr/oai/openair-cn.git</GitOpenair-cnRepo>
@@ -11,9 +11,9 @@
<CleanUpAluLteBox>sudo -S -E /opt/ltebox/tools/stop_ltebox</CleanUpAluLteBox>
<ExmimoRfStop>exmimo_pci=`lspci -m | grep Xilinx`; if [ -n "$exmimo_pci" ] ; then $OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; fi; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue; uname -a; sudo -E dmesg</ExmimoRfStop>
<Timeout_execution>36000</Timeout_execution>
- <TestCaseExclusionList>010141 0102+ 010301 010303 010304 010305 0104+ 015508 015511 015520 015523 015518 015519 015520 015521 015522 015523 015602 015605 015702 015705 015818 015819 015820 015821 015822 015823 016102 016105 016502 016505 017002 017005 017502 017505 018002 018005 018502 018505 025514 025517 025520 025523 025518 025519 025520 025521 025522 025523</TestCaseExclusionList>
+ <TestCaseExclusionList>010141 0102+ 010301 010303 010304 010305 0104+ 015508 015511 015520 015523 015518 015519 015520 015521 015522 015523 015602 015605 015702 015705 015818 015819 015820 015821 015822 015823 016102 016105 016502 016505 017002 017005 018002 018005 018502 018505 025514 025517 025520 025523 025518 025519 025520 025521 025522 025523</TestCaseExclusionList>
<nruns_lte-softmodem>3</nruns_lte-softmodem>
- <MachineListGeneric>mozart hutch starsky stevens amerique calisson </MachineListGeneric>
+ <MachineListGeneric>amerique mozart hutch starsky stevens calisson superserver </MachineListGeneric>
<testCase id="010101" >
<class>compilation</class>
<desc>Build oaisim.Rel8</desc>
@@ -1025,7 +1025,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1040,7 +1040,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -1100,7 +1100,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1115,7 +1115,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -1175,7 +1175,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1190,7 +1190,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14M -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14M </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -1249,7 +1249,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1322,7 +1322,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1396,7 +1396,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1473,7 +1473,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1550,7 +1550,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1626,7 +1626,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1702,7 +1702,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1778,7 +1778,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1855,7 +1855,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1929,7 +1929,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2004,7 +2004,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2079,7 +2079,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2153,7 +2153,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2226,7 +2226,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2300,7 +2300,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2379,7 +2379,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2456,7 +2456,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2532,7 +2532,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2608,7 +2608,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2684,7 +2684,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2761,7 +2761,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2854,7 +2854,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -2938,7 +2938,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -3022,7 +3022,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -3106,7 +3106,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -3190,7 +3190,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -3274,7 +3274,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=0.0Mbits/sec max=42.0Mbits/sec average=44.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -3358,7 +3358,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -3452,7 +3452,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -3546,7 +3546,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -3640,7 +3640,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 10M -R </UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -b 10M -R </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9Mbits/sec average=9Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -3734,7 +3734,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 10M -R </UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -b 10M -R </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9Mbits/sec average=9Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -3827,7 +3827,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 9M -R </UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -b 9M -R </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9Mbits/sec average=9Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -3904,7 +3904,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3918,7 +3918,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -3976,7 +3976,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3990,7 +3990,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -4048,7 +4048,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4063,7 +4063,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 17Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 17Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -4120,7 +4120,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4191,7 +4191,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args>sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4263,7 +4263,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4334,7 +4334,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4348,7 +4348,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -4406,7 +4406,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4420,7 +4420,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -4478,7 +4478,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4493,7 +4493,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -4550,7 +4550,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4621,7 +4621,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args>sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4693,7 +4693,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4766,7 +4766,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4780,7 +4780,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -4840,7 +4840,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4854,7 +4854,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -4914,7 +4914,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4929,7 +4929,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 28Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 28Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -4988,7 +4988,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5061,7 +5061,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5135,7 +5135,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5208,7 +5208,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5222,7 +5222,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -5282,7 +5282,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5296,7 +5296,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -5356,7 +5356,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5371,7 +5371,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -5430,7 +5430,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5503,7 +5503,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5577,7 +5577,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5665,7 +5665,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -5748,7 +5748,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -5911,7 +5911,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -5992,7 +5992,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6074,7 +6074,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6140,7 +6140,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; dmesg|tail </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6154,7 +6154,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6212,7 +6212,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6227,7 +6227,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6300,7 +6300,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6357,7 +6357,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6428,7 +6428,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6499,7 +6499,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6588,7 +6588,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6671,7 +6671,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6752,7 +6752,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6833,7 +6833,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6914,7 +6914,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6995,7 +6995,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -7080,7 +7080,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -7156,7 +7156,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -7231,7 +7231,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -7306,7 +7306,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -7379,7 +7379,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -7454,7 +7454,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -7529,7 +7529,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -7605,7 +7605,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -7680,7 +7680,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -7755,7 +7755,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -7828,7 +7828,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -7903,7 +7903,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -7935,67 +7935,90 @@ c
<testCase id="017500" >
<class>lte-softmodem</class>
<desc></desc>
- <RRH>calisson</RRH>
+ <RRH>superserver</RRH>
<UE>stevens</UE>
<EPC>amerique</EPC>
- <eNB>mozart</eNB>
+ <eNB>hutch</eNB>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf pdsch_referenceSignalPower -26
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_PORT_FOR_S1U 2152
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=70;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_function \"NGFI_RCC_IF4p5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_synch_ref 0
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -24
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antenna_ports 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ue_TransmissionMode 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"em2\";remote_address=\"00:25:90:f0:f1:2f\";local_address=\"0c:c4:7a:82:95:95\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</eNB_config_file>
+
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
- <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c --disable-deadline </eNB_compile_prog_args>
+ <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
- <eNB_main_exec>sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf </eNB_main_exec_args>
+ <eNB_main_exec>sleep 30; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
+ <RRH_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_function \"NGFI_RRU_IF4p5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_synch_ref 0
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -24
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antenna_ports 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf ue_TransmissionMode 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"eth3\";remote_address=\"0c:c4:7a:82:95:95\";local_address=\"00:25:90:f0:f1:2f\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</RRH_config_file>
<RRH_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</RRH_compile_prog>
- <RRH_compile_prog_args>--RRH -w USRP -t ETHERNET -c --disable-deadline </RRH_compile_prog_args>
+ <RRH_compile_prog_args>--eNB -w USRP -t ETHERNET -c -x </RRH_compile_prog_args>
<RRH_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</RRH_pre_exec>
<RRH_pre_exec_args></RRH_pre_exec_args>
- <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</RRH_main_exec>
- <RRH_main_exec_args> -n1 -x -m1 -i eth1 </RRH_main_exec_args>
+ <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</RRH_main_exec>
+ <RRH_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf </RRH_main_exec_args>
<RRH_terminate_missing_procs>False</RRH_terminate_missing_procs>
-
-
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
<UE_compile_prog></UE_compile_prog>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
- <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
+ <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 7Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file></EPC_config_file>
@@ -8012,10 +8035,10 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=5.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
- <tags>USRPb210.RRH.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
+ <tags>USRPb210.RRH.IF4P5.ALU_EPC.SonyExperiaM4.5MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
@@ -8023,65 +8046,91 @@ c
<testCase id="017501" >
<class>lte-softmodem</class>
<desc></desc>
- <RRH>calisson</RRH>
- <eNB>mozart</eNB>
+ <RRH>superserver</RRH>
<UE>stevens</UE>
<EPC>amerique</EPC>
+ <eNB>hutch</eNB>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf pdsch_referenceSignalPower -29
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_PORT_FOR_S1U 2152
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=113;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_function \"NGFI_RCC_IF4p5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_synch_ref 0
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -27
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antenna_ports 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ue_TransmissionMode 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"em2\";remote_address=\"00:25:90:f0:f1:2f\";local_address=\"0c:c4:7a:82:95:95\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</eNB_config_file>
+
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
- <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c --disable-deadline </eNB_compile_prog_args>
+ <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
- <eNB_main_exec>sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf </eNB_main_exec_args>
+ <eNB_main_exec>sleep 30; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
+ <RRH_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_function \"NGFI_RRU_IF4p5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_synch_ref 0
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -27
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antenna_ports 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf ue_TransmissionMode 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"eth3\";remote_address=\"0c:c4:7a:82:95:95\";local_address=\"00:25:90:f0:f1:2f\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</RRH_config_file>
<RRH_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</RRH_compile_prog>
- <RRH_compile_prog_args>--RRH -w USRP -t ETHERNET -c --disable-deadline </RRH_compile_prog_args>
+ <RRH_compile_prog_args>--eNB -w USRP -t ETHERNET -c -x </RRH_compile_prog_args>
<RRH_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</RRH_pre_exec>
<RRH_pre_exec_args></RRH_pre_exec_args>
- <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</RRH_main_exec>
- <RRH_main_exec_args> -n1 -x -m1 -i eth1 </RRH_main_exec_args>
+ <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</RRH_main_exec>
+ <RRH_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf </RRH_main_exec_args>
<RRH_terminate_missing_procs>False</RRH_terminate_missing_procs>
+
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
<UE_compile_prog></UE_compile_prog>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
- <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
+ <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file></EPC_config_file>
@@ -8098,59 +8147,84 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
- <tags>USRPb210.RRH.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
+ <tags>USRPb210.RRH.IF4P5.ALU_EPC.SonyExperiaM4.10MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="017502" >
<class>lte-softmodem</class>
<desc></desc>
- <RRH>calisson</RRH>
- <eNB>mozart</eNB>
+ <RRH>superserver</RRH>
<UE>stevens</UE>
<EPC>amerique</EPC>
+ <eNB>hutch</eNB>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf pdsch_referenceSignalPower -32
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_PORT_FOR_S1U 2152
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=115;tx_scheduling_advance=11;rrh_gw_active=\"yes\";"</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_function \"NGFI_RCC_IF4p5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_synch_ref 0
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -30
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antenna_ports 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ue_TransmissionMode 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"em2\";remote_address=\"00:25:90:f0:f1:2f\";local_address=\"0c:c4:7a:82:95:95\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</eNB_config_file>
+
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
- <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c --disable-deadline </eNB_compile_prog_args>
+ <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
- <eNB_main_exec>sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf </eNB_main_exec_args>
+ <eNB_main_exec>sleep 30; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
+ <RRH_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_function \"NGFI_RRU_IF4p5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_synch_ref 0
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -30
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antenna_ports 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf ue_TransmissionMode 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"eth3\";remote_address=\"0c:c4:7a:82:95:95\";local_address=\"00:25:90:f0:f1:2f\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</RRH_config_file>
<RRH_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</RRH_compile_prog>
- <RRH_compile_prog_args>--RRH -w USRP -t ETHERNET -c --disable-deadline </RRH_compile_prog_args>
+ <RRH_compile_prog_args>--eNB -w USRP -t ETHERNET -c -x </RRH_compile_prog_args>
<RRH_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</RRH_pre_exec>
<RRH_pre_exec_args></RRH_pre_exec_args>
- <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</RRH_main_exec>
- <RRH_main_exec_args> -n1 -x -m1 -i eth1 </RRH_main_exec_args>
+ <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</RRH_main_exec>
+ <RRH_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf </RRH_main_exec_args>
<RRH_terminate_missing_procs>False</RRH_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
@@ -8159,14 +8233,14 @@ c
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
- <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
+ <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 28Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file></EPC_config_file>
@@ -8183,76 +8257,103 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=5.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
- <tags>USRPb210.RRH.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
+ <tags>USRPb210.RRH.IF4P5.ALU_EPC.SonyExperiaM4.10MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="017503" >
<class>lte-softmodem</class>
<desc></desc>
- <RRH>calisson</RRH>
- <eNB>mozart</eNB>
+ <RRH>superserver</RRH>
<UE>stevens</UE>
<EPC>amerique</EPC>
+ <eNB>hutch</eNB>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf pdsch_referenceSignalPower -26
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_PORT_FOR_S1U 2152
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=70;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_function \"NGFI_RCC_IF4p5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_synch_ref 0
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -24
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antenna_ports 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ue_TransmissionMode 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"em2\";remote_address=\"00:25:90:f0:f1:2f\";local_address=\"0c:c4:7a:82:95:95\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</eNB_config_file>
+
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
- <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c --disable-deadline </eNB_compile_prog_args>
+ <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
- <eNB_main_exec>sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf </eNB_main_exec_args>
+ <eNB_main_exec>sleep 30; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
+ <RRH_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_function \"NGFI_RRU_IF4p5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_synch_ref 0
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -24
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antenna_ports 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf ue_TransmissionMode 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"eth3\";remote_address=\"0c:c4:7a:82:95:95\";local_address=\"00:25:90:f0:f1:2f\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</RRH_config_file>
<RRH_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</RRH_compile_prog>
- <RRH_compile_prog_args>--RRH -w USRP -t ETHERNET -c --disable-deadline </RRH_compile_prog_args>
+ <RRH_compile_prog_args>--eNB -w USRP -t ETHERNET -c -x </RRH_compile_prog_args>
<RRH_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</RRH_pre_exec>
<RRH_pre_exec_args></RRH_pre_exec_args>
- <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</RRH_main_exec>
- <RRH_main_exec_args> -n1 -x -m1 -i eth1 </RRH_main_exec_args>
+ <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</RRH_main_exec>
+ <RRH_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf </RRH_main_exec_args>
<RRH_terminate_missing_procs>False</RRH_terminate_missing_procs>
+
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
<UE_compile_prog></UE_compile_prog>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
- <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
+ <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
- <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>
<UE_search_expr_false></UE_search_expr_false>
-
+
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file></EPC_config_file>
<EPC_compile_prog></EPC_compile_prog>
@@ -8266,77 +8367,103 @@ c
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 16Mbits/s -i 1 -f m -u</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
- <tags>USRPb210.RRH.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX</tags>
+ <tags>USRPb210.RRH.IF4P5.ALU_EPC.SonyExperiaM4.5MHz.FDD.UDP.Band_7.DL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="017504" >
<class>lte-softmodem</class>
<desc></desc>
- <RRH>calisson</RRH>
- <eNB>mozart</eNB>
+ <RRH>superserver</RRH>
<UE>stevens</UE>
<EPC>amerique</EPC>
+ <eNB>hutch</eNB>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf pdsch_referenceSignalPower -29
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_PORT_FOR_S1U 2152
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=113;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_function \"NGFI_RCC_IF4p5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_synch_ref 0
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -27
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antenna_ports 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ue_TransmissionMode 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"em2\";remote_address=\"00:25:90:f0:f1:2f\";local_address=\"0c:c4:7a:82:95:95\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</eNB_config_file>
+
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
- <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c --disable-deadline </eNB_compile_prog_args>
+ <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
- <eNB_main_exec>sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf </eNB_main_exec_args>
+ <eNB_main_exec>sleep 30; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
+ <RRH_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_function \"NGFI_RRU_IF4p5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_synch_ref 0
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -27
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antenna_ports 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf ue_TransmissionMode 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"eth3\";remote_address=\"0c:c4:7a:82:95:95\";local_address=\"00:25:90:f0:f1:2f\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</RRH_config_file>
<RRH_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</RRH_compile_prog>
- <RRH_compile_prog_args>--RRH -w USRP -t ETHERNET -c --disable-deadline </RRH_compile_prog_args>
+ <RRH_compile_prog_args>--eNB -w USRP -t ETHERNET -c -x </RRH_compile_prog_args>
<RRH_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</RRH_pre_exec>
<RRH_pre_exec_args></RRH_pre_exec_args>
- <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</RRH_main_exec>
- <RRH_main_exec_args> -n1 -x -m1 -i eth1 </RRH_main_exec_args>
+ <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</RRH_main_exec>
+ <RRH_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf </RRH_main_exec_args>
<RRH_terminate_missing_procs>False</RRH_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
+ <UE_compile_prog></UE_compile_prog>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
- <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
+ <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
-
-
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>
+ <UE_search_expr_false></UE_search_expr_false>
+
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file></EPC_config_file>
<EPC_compile_prog></EPC_compile_prog>
@@ -8350,60 +8477,85 @@ c
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 32Mbits/s -i 1 -f m -u</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
- <tags>USRPb210.RRH.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX</tags>
+ <tags>USRPb210.RRH.IF4P5.ALU_EPC.SonyExperiaM4.5MHz.FDD.UDP.Band_7.DL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="017505" >
<class>lte-softmodem</class>
<desc></desc>
- <RRH>calisson</RRH>
- <eNB>mozart</eNB>
+ <RRH>superserver</RRH>
<UE>stevens</UE>
<EPC>amerique</EPC>
+ <eNB>hutch</eNB>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf pdsch_referenceSignalPower -32
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_PORT_FOR_S1U 2152
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=115;tx_scheduling_advance=11;rrh_gw_active=\"yes\";"</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_function \"NGFI_RCC_IF4p5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_synch_ref 0
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -30
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antenna_ports 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ue_TransmissionMode 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"em2\";remote_address=\"00:25:90:f0:f1:2f\";local_address=\"0c:c4:7a:82:95:95\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</eNB_config_file>
+
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
- <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c --disable-deadline </eNB_compile_prog_args>
+ <eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
- <eNB_main_exec>sleep 5; $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf </eNB_main_exec_args>
+ <eNB_main_exec>sleep 30; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
+ <RRH_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_function \"NGFI_RRU_IF4p5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_synch_ref 0
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -30
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antenna_ports 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf ue_TransmissionMode 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"eth3\";remote_address=\"0c:c4:7a:82:95:95\";local_address=\"00:25:90:f0:f1:2f\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"</RRH_config_file>
<RRH_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</RRH_compile_prog>
- <RRH_compile_prog_args>--RRH -w USRP -t ETHERNET -c --disable-deadline </RRH_compile_prog_args>
+ <RRH_compile_prog_args>--eNB -w USRP -t ETHERNET -c -x </RRH_compile_prog_args>
<RRH_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</RRH_pre_exec>
<RRH_pre_exec_args></RRH_pre_exec_args>
- <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</RRH_main_exec>
- <RRH_main_exec_args> -n1 -x -m1 -i eth1 </RRH_main_exec_args>
+ <RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</RRH_main_exec>
+ <RRH_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf </RRH_main_exec_args>
<RRH_terminate_missing_procs>False</RRH_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
@@ -8412,16 +8564,16 @@ c
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
- <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
+ <UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
-
-
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>
+ <UE_search_expr_false></UE_search_expr_false>
+
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file></EPC_config_file>
<EPC_compile_prog></EPC_compile_prog>
@@ -8435,11 +8587,11 @@ c
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 15Mbits/s </EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 60Mbits/s -i 1 -f m -u</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
- <tags>USRPb210.RRH.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX</tags>
+ <tags>USRPb210.RRH.IF4P5.ALU_EPC.SonyExperiaM4.5MHz.FDD.UDP.Band_7.DL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
@@ -8474,7 +8626,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -8489,7 +8641,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 7Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -8549,7 +8701,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -8564,7 +8716,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -8624,7 +8776,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -8639,7 +8791,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 28Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -8698,7 +8850,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -8772,7 +8924,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -8847,7 +8999,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -8921,7 +9073,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -8936,7 +9088,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -8996,7 +9148,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -9011,7 +9163,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -9071,7 +9223,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -9086,7 +9238,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -9145,7 +9297,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -9219,7 +9371,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -E -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -E -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -9294,7 +9446,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -9371,7 +9523,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -9386,7 +9538,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 7Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -9448,7 +9600,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -9463,7 +9615,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -9525,7 +9677,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -9540,7 +9692,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -9601,7 +9753,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -9677,7 +9829,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -9754,7 +9906,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -9830,7 +9982,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -9845,7 +9997,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -9907,7 +10059,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -9922,7 +10074,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -9984,7 +10136,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -9999,7 +10151,7 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -10060,7 +10212,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -10136,7 +10288,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -10213,7 +10365,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>