configure_cots_huaweiE398_ue.py 7.8 KB
Newer Older
Rohit Gupta's avatar
Rohit Gupta committed
1
#!/usr/bin/python 
2 3 4 5 6
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements.  See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
Cedric Roux's avatar
Cedric Roux committed
7
# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
8 9 10 11 12 13 14 15 16 17 18 19 20 21
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# *      http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# *      contact@openairinterface.org
# */
Rohit Gupta's avatar
Rohit Gupta committed
22 23

# \author Navid Nikaein, Rohit Gupta
Rohit Gupta's avatar
Rohit Gupta committed
24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

import time
import serial
import os
from pyroute2 import IPRoute
import sys
import re
import threading
import signal
import traceback
import os
import commands

# configure the serial connections (the parameters differs on the device you are connecting to)
#First we find an open port to work with
serial_port=''
ser=serial.Serial()
openair_dir = os.environ.get('OPENAIR_DIR')
if openair_dir == None:
  print "Error getting OPENAIR_DIR environment variable"
  sys.exit(1)

sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/'))

from lib_autotest import *

def find_open_port():
   global serial_port, ser
   max_ports=100
53
   serial_port=''
54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69
   while True:
     if os.path.exists(serial_port) == True:
       return serial_port
     for port in range(2,100):
        serial_port_tmp = '/dev/ttyUSB'+str(port)
        if os.path.exists(serial_port_tmp) == True:
           print 'New Serial Port : ' + serial_port_tmp
           serial_port = serial_port_tmp
           break
     if serial_port == '':
        print" Not able to detect valid serial ports. Resetting the modem now..."
        reset_ue()
     else :
        ser = serial.Serial(port=serial_port)
        return

Rohit Gupta's avatar
Rohit Gupta committed
70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137


    
#serial_port = '/dev/ttyUSB2'
bandrich_ppd_config = os.environ.get('OPENAIR_DIR') + '/cmake_targets/autotests/tools/wdial.bandrich.conf'

exit_flag=0

def signal_handler(signal, frame):
        print('You pressed Ctrl+C!')
        print('Resetting the UE to detached state')
        timeout=10
        exit_flag=1
        send_command('AT+CGATT=0' , 'OK' , timeout)
        sys.exit(0)

signal.signal(signal.SIGINT, signal_handler)



#ser.open()
#ser.isOpen()

class pppThread (threading.Thread):
    def __init__(self, threadID, name, counter):
        threading.Thread.__init__(self)
        self.threadID = threadID
        self.name = name
        self.counter = counter
    def run(self):
        print "Starting " + self.name
        #Here we keep running pppd thread in indefinite loop as this script terminates sometimes
        #while 1:
        while 1:
           time.sleep(5) #Hard coded, do not reduce this number! 
           print "Starting wvdial now..."
           print 'exit_flag = ' + str(exit_flag)
           send_command('AT+CGATT=1','OK', 300)
           os.system('wvdial -C ' + bandrich_ppd_config + '' )
           if exit_flag == 1:
              print "Exit flag set to true. Exiting pppThread now"
           print "Terminating wvdial now..."

def send_command (cmd, response, timeout):
   count=0
   sleep_duration = 1
   print 'In function: send_command: cmd = <' + cmd + '> response: <' + response + '> \n'
   global serial_port, ser
   while count <= timeout:
      try:
        #Sometimes the port does not exist coz of reset in modem.
        #In that case, we need to search for this port again
        if os.path.exists(serial_port) == False:
            find_open_port()
        ser.write (cmd + '\r\n')
        out = ''
        time.sleep(sleep_duration)
        count = count + sleep_duration
        while ser.inWaiting() > 0:
            out += ser.read(1)
        print 'out = <' + out + '> response = <' + response + '> \n'
        if re.search(response, out):
          break
      except Exception, e:
        error = ' cmd : ' + cmd + ' response : ' + response
        error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: '  + str(e.__class__) + " : " + str( e)
        error = error + traceback.format_exc()
        print error
138
        time.sleep(1)
Rohit Gupta's avatar
Rohit Gupta committed
139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175
        

def start_ue () :
   #print 'Enter your commands below.\r\nInsert "exit" to leave the application.'
   timeout=60 #timeout in seconds
   send_command('AT', 'OK' , timeout)
   #send_command('AT+CFUN=1' , 'OK' , timeout)
   #send_command('AT+CGATT=0' , 'OK' , timeout)
   send_command('AT+CGATT=1','OK', 300)
   #os.system('wvdial -C ' + bandrich_ppd_config + ' &' )
   
   thread_ppp = pppThread(1, "ppp_thread", 1)
   thread_ppp.start()

   iface='ppp0'
   
   while 1:
     time.sleep ( 2)
     #Now we check if ppp0 interface is up and running
     try:
        if exit_flag == 1:
          break
        ip = IPRoute()
        idx = ip.link_lookup(ifname=iface)[0]
        os.system ('route add ' + gw + ' ppp0')
        os.system('sleep 5')
        os.system ('ping ' + gw)
        break
     except Exception, e:
        error = ' Interface ' + iface + 'does not exist...'
        error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: '  + str(e.__class__) + " : " + str( e)
        error = error + traceback.format_exc()
        print error
    
   thread_ppp.join()

def stop_ue():
176 177 178 179 180 181 182 183 184 185
  stringIdBandrich='Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard'
  status, out = commands.getstatusoutput('lsusb | grep -i \'' + stringIdBandrich + '\'')
  if (out == '') :
     print "Huawei E398 Adapter not found. Exiting now..."
     sys.exit()
  timeout=60
  os.system('killall wvdial')
  send_command('AT', 'OK' , timeout)
  send_command('AT+CGATT=0' , 'OK|ERROR' , timeout)
  #send_command('AT+CFUN=4' , 'OK' , timeout)
Rohit Gupta's avatar
Rohit Gupta committed
186 187 188 189 190 191 192


#reset the USB BUS of Bandrich UE
def reset_ue():
  stringIdBandrich='Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard'
  status, out = commands.getstatusoutput('lsusb | grep -i \'' + stringIdBandrich + '\'')
  if (out == '') :
193
     print "Huawei E398 Adapter not found. Exiting now..."
Rohit Gupta's avatar
Rohit Gupta committed
194 195 196 197 198 199 200 201 202 203 204 205 206
     sys.exit()
  p=re.compile('Bus\s*(\w+)\s*Device\s*(\w+):\s*ID\s*(\w+):(\w+)')
  res=p.findall(out)
  BusId=res[0][0]
  DeviceId=res[0][1]
  VendorId=res[0][2]
  ProductId=res[0][3]
  usb_dir= find_usb_path(VendorId, ProductId)
  print "Bandrich 4G LTE Adapter found in..." + usb_dir
  cmd = "sudo sh -c \"echo 0 > " + usb_dir + "/authorized\""
  os.system(cmd + " ; sleep 15" )
  cmd = "sudo sh -c \"echo 1 > " + usb_dir + "/authorized\""
  os.system(cmd + " ; sleep 30" )
207
  stop_ue()
Rohit Gupta's avatar
Rohit Gupta committed
208 209 210 211 212 213 214 215 216 217 218 219 220 221

i=1
gw='192.172.0.1'
while i <  len(sys.argv):
    arg=sys.argv[i]
    if arg == '--start-ue' :
        find_open_port()
        print 'Using Serial port : ' + serial_port  
        start_ue()
    elif arg == '--stop-ue' :
        find_open_port()
        print 'Using Serial port : ' + serial_port  
        stop_ue()
    elif arg == '--reset-ue' :
222
        find_open_port()
Rohit Gupta's avatar
Rohit Gupta committed
223 224 225 226 227 228 229 230 231 232 233 234 235 236 237
        reset_ue()
    elif arg == '-gw' :
        gw = sys.argv[i+1]
        i=i+1
    elif arg == '-h' :
        print "--reset-ue:  Reset the UE on USB Bus. Similar to unplugging and plugging the UE"
        print "--stop-ue:  Stop the UE. Send DETACH command" 
        print "--start-ue:  Start the UE. Send ATTACH command"
        print "-gw:  Specify the default gw as sometimes the gateway/route arguments are not set properly via wvdial"
    else :
        print " Script called with wrong arguments, arg = " + arg
        sys.exit()
    i = i +1