diff --git a/openair1/SCHED/phy_procedures_lte_ue.c b/openair1/SCHED/phy_procedures_lte_ue.c
index 03f00a5f39b2b65d21cb454ae2394284af10b338..95b0a5f44439eef9c003a6a1b2d596f68b56c8e6 100755
--- a/openair1/SCHED/phy_procedures_lte_ue.c
+++ b/openair1/SCHED/phy_procedures_lte_ue.c
@@ -344,7 +344,7 @@ void process_timing_advance(uint8_t Mod_id,uint8_t CC_id,int16_t timing_advance)
//}
}
- LOG_I(PHY,"[UE %d] Got timing advance %d from MAC, new value %d\n",Mod_id, timing_advance, PHY_vars_UE_g[Mod_id][CC_id]->timing_advance);
+ LOG_D(PHY,"[UE %d] Got timing advance %d from MAC, new value %d\n",Mod_id, timing_advance, PHY_vars_UE_g[Mod_id][CC_id]->timing_advance);
}
@@ -677,7 +677,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
eNB_id);
phy_vars_ue->ulsch_ue[eNB_id]->power_offset = 14;
- LOG_I(PHY,"[UE %d][RAPROC] Frame %d: Setting Msg3_flag in subframe %d, for harq_pid %d\n",
+ LOG_D(PHY,"[UE %d][RAPROC] Frame %d: Setting Msg3_flag in subframe %d, for harq_pid %d\n",
Mod_id,
frame_tx,
subframe_tx,
@@ -734,7 +734,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
#ifdef DEBUG_PHY_PROC
- LOG_I(PHY,"[UE %d][PUSCH %d] Frame %d subframe %d Generating PUSCH : first_rb %d, nb_rb %d, round %d, mcs %d, rv %d, cyclic_shift %d (cyclic_shift_common %d,n_DMRS2 %d,n_PRS %d), ACK (%d,%d), O_ACK %d\n",
+ LOG_D(PHY,"[UE %d][PUSCH %d] Frame %d subframe %d Generating PUSCH : first_rb %d, nb_rb %d, round %d, mcs %d, rv %d, cyclic_shift %d (cyclic_shift_common %d,n_DMRS2 %d,n_PRS %d), ACK (%d,%d), O_ACK %d\n",
Mod_id,harq_pid,frame_tx,subframe_tx,
first_rb,nb_rb,
phy_vars_ue->ulsch_ue[eNB_id]->harq_processes[harq_pid]->round,
@@ -749,7 +749,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
phy_vars_ue->ulsch_ue[eNB_id]->o_ACK[0],phy_vars_ue->ulsch_ue[eNB_id]->o_ACK[1],
phy_vars_ue->ulsch_ue[eNB_id]->harq_processes[harq_pid]->O_ACK);
if (ack_status > 0) {
- LOG_I(PHY,"[UE %d][PDSCH %x] Frame %d subframe %d Generating ACK (%d,%d) for %d bits on PUSCH\n",
+ LOG_D(PHY,"[UE %d][PDSCH %x] Frame %d subframe %d Generating ACK (%d,%d) for %d bits on PUSCH\n",
Mod_id,
phy_vars_ue->ulsch_ue[eNB_id]->rnti,
frame_tx,subframe_tx,
@@ -763,7 +763,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
// debug_LOG_D(PHY,"[UE %d] Frame %d, Subframe %d ulsch harq_pid %d : O %d, O_ACK %d, O_RI %d, TBS %d\n",Mod_id,phy_vars_ue->frame,subframe_tx,harq_pid,phy_vars_ue->ulsch_ue[eNB_id]->O,phy_vars_ue->ulsch_ue[eNB_id]->O_ACK,phy_vars_ue->ulsch_ue[eNB_id]->O_RI,phy_vars_ue->ulsch_ue[eNB_id]->harq_processes[harq_pid]->TBS);
//#endif
if (Msg3_flag == 1) {
- LOG_I(PHY,"[UE %d][RAPROC] Frame %d, Subframe %d next slot %d Generating (RRCConnectionRequest) Msg3 (nb_rb %d, first_rb %d, round %d, rvidx %d) Msg3: %x.%x.%x|%x.%x.%x.%x.%x.%x\n",Mod_id,frame_tx,subframe_tx, slot_tx,
+ LOG_D(PHY,"[UE %d][RAPROC] Frame %d, Subframe %d next slot %d Generating (RRCConnectionRequest) Msg3 (nb_rb %d, first_rb %d, round %d, rvidx %d) Msg3: %x.%x.%x|%x.%x.%x.%x.%x.%x\n",Mod_id,frame_tx,subframe_tx, slot_tx,
phy_vars_ue->ulsch_ue[eNB_id]->harq_processes[harq_pid]->nb_rb,
phy_vars_ue->ulsch_ue[eNB_id]->harq_processes[harq_pid]->first_rb,
phy_vars_ue->ulsch_ue[eNB_id]->harq_processes[harq_pid]->round,
@@ -839,7 +839,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
}
#ifdef DEBUG_PHY_PROC
#ifdef DEBUG_ULSCH
- LOG_I(PHY,"[UE] Frame %d, subframe %d : ULSCH SDU (TX harq_pid %d) (%d bytes) : \n",frame_tx,subframe_tx,harq_pid, phy_vars_ue->ulsch_ue[eNB_id]->harq_processes[harq_pid]->TBS>>3);
+ LOG_D(PHY,"[UE] Frame %d, subframe %d : ULSCH SDU (TX harq_pid %d) (%d bytes) : \n",frame_tx,subframe_tx,harq_pid, phy_vars_ue->ulsch_ue[eNB_id]->harq_processes[harq_pid]->TBS>>3);
for (i=0;i<phy_vars_ue->ulsch_ue[eNB_id]->harq_processes[harq_pid]->TBS>>3;i++)
LOG_T(PHY,"%x.",ulsch_input_buffer[i]);
LOG_T(PHY,"\n");
@@ -905,7 +905,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
#endif
phy_vars_ue->tx_total_RE = phy_vars_ue->ulsch_ue[eNB_id]->harq_processes[harq_pid]->nb_rb*12;
- LOG_I(PHY,"[UE %d][PUSCH %d] Frame %d subframe %d, generating PUSCH, Po_PUSCH: %d dBm, amp %d\n",
+ LOG_D(PHY,"[UE %d][PUSCH %d] Frame %d subframe %d, generating PUSCH, Po_PUSCH: %d dBm, amp %d\n",
Mod_id,harq_pid,frame_tx,subframe_tx,phy_vars_ue->tx_power_dBm,
#if defined(EXMIMO) || defined(USRP)
get_tx_amp(phy_vars_ue->tx_power_dBm,phy_vars_ue->tx_power_max_dBm)
@@ -1007,7 +1007,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
phy_vars_ue->tx_total_RE = 12;
if (SR_payload>0) {
- LOG_I(PHY,"[UE %d][SR %x] Frame %d subframe %d Generating PUCCH 1a/1b (with SR for PUSCH), n1_pucch %d, Po_PUCCH, amp %d\n",
+ LOG_D(PHY,"[UE %d][SR %x] Frame %d subframe %d Generating PUCCH 1a/1b (with SR for PUSCH), n1_pucch %d, Po_PUCCH, amp %d\n",
Mod_id,
phy_vars_ue->dlsch_ue[eNB_id][0]->rnti,
frame_tx, subframe_tx,
@@ -1021,7 +1021,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
);
}
else {
- LOG_I(PHY,"[UE %d][PDSCH %x] Frame %d subframe %d Generating PUCCH 1a/1b, n1_pucch %d, b[0]=%d,b[1]=%d (SR_Payload %d), Po_PUCCH %d, amp %d\n",
+ LOG_D(PHY,"[UE %d][PDSCH %x] Frame %d subframe %d Generating PUCCH 1a/1b, n1_pucch %d, b[0]=%d,b[1]=%d (SR_Payload %d), Po_PUCCH %d, amp %d\n",
Mod_id,
phy_vars_ue->dlsch_ue[eNB_id][0]->rnti,
frame_tx, subframe_tx,
@@ -1076,7 +1076,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
#endif
phy_vars_ue->tx_total_RE = 12;
- LOG_I(PHY,"[UE %d][SR %x] Frame %d subframe %d Generating PUCCH 1 (SR for PUSCH), n1_pucch %d, Po_PUCCH %d\n",
+ LOG_D(PHY,"[UE %d][SR %x] Frame %d subframe %d Generating PUCCH 1 (SR for PUSCH), n1_pucch %d, Po_PUCCH %d\n",
Mod_id,
phy_vars_ue->dlsch_ue[eNB_id][0]->rnti,
frame_tx, subframe_tx,
@@ -1125,7 +1125,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
input_buffer_length = phy_vars_ue->ulsch_ue[eNB_id]->harq_processes[harq_pid]->TBS/8;
access_mode=CBA_ACCESS;
- LOG_I(PHY,"[UE %d] Frame %d, subframe %d: CBA num dci %d\n",
+ LOG_D(PHY,"[UE %d] Frame %d, subframe %d: CBA num dci %d\n",
Mod_id,frame_tx,subframe_tx,
phy_vars_ue->ulsch_ue[eNB_id]->num_cba_dci[subframe_tx]);
@@ -1171,7 +1171,16 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
nsymb = (frame_parms->Ncp == 0) ? 14 : 12;
#if defined(EXMIMO) || defined(USRP) //this is the EXPRESS MIMO case
- ulsch_start = (phy_vars_ue->rx_offset+subframe_tx*frame_parms->samples_per_tti-openair_daq_vars.timing_advance-phy_vars_ue->timing_advance-phy_vars_ue->N_TA_offset+5)%(LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*frame_parms->samples_per_tti);
+ ulsch_start = (phy_vars_ue->rx_offset+subframe_tx*frame_parms->samples_per_tti-
+ openair_daq_vars.timing_advance-
+ phy_vars_ue->timing_advance-
+ phy_vars_ue->N_TA_offset+5)%(LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*frame_parms->samples_per_tti);
+ LOG_D(PHY,"[UE %d] Frame %d, subframe %d: ulsch_start = %d (rxoff %d, HW TA %d, TA %d, TA_offset %d\n",
+ phy_vars_ue->rx_offset,
+ openair_daq_vars.timing_advance,
+ phy_vars_ue->timing_advance,
+ phy_vars_ue->N_TA_offset);
+
#else //this is the normal case
ulsch_start = (frame_parms->samples_per_tti*subframe_tx)-phy_vars_ue->N_TA_offset;
#endif //else EXMIMO
@@ -1292,7 +1301,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
phy_vars_ue->prach_PreambleIndex=phy_vars_ue->prach_resources[eNB_id]->ra_PreambleIndex;
#endif
if (abstraction_flag == 0) {
- LOG_I(PHY,"[UE %d][RAPROC] Frame %d, Subframe %d : Generating PRACH, preamble %d, TARGET_RECEIVED_POWER %d dBm, PRACH TDD Resource index %d, RA-RNTI %d\n",
+ LOG_D(PHY,"[UE %d][RAPROC] Frame %d, Subframe %d : Generating PRACH, preamble %d, TARGET_RECEIVED_POWER %d dBm, PRACH TDD Resource index %d, RA-RNTI %d\n",
Mod_id,
frame_tx,
subframe_tx,
@@ -1314,7 +1323,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
#else
phy_vars_ue->lte_ue_prach_vars[eNB_id]->amp = AMP;
#endif
- LOG_I(PHY,"[UE %d][RAPROC] Frame %d, Subframe %d : PRACH TX power %d dBm, amp %d\n",Mod_id,phy_vars_ue->frame_rx,phy_vars_ue->slot_tx>>1,phy_vars_ue->tx_power_dBm,phy_vars_ue->lte_ue_prach_vars[eNB_id]->amp);
+ LOG_D(PHY,"[UE %d][RAPROC] Frame %d, Subframe %d : PRACH TX power %d dBm, amp %d\n",Mod_id,phy_vars_ue->frame_rx,phy_vars_ue->slot_tx>>1,phy_vars_ue->tx_power_dBm,phy_vars_ue->lte_ue_prach_vars[eNB_id]->amp);
// start_meas(&phy_vars_ue->tx_prach);
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_GENERATE_PRACH, VCD_FUNCTION_IN);
@@ -2034,7 +2043,7 @@ int lte_ue_pdcch_procedures(uint8_t eNB_id,PHY_VARS_UE *phy_vars_ue,uint8_t abst
if((dci_alloc_rx[i].rnti == phy_vars_ue->lte_ue_pdcch_vars[eNB_id]->crnti) &&
(dci_alloc_rx[i].format != format0)) {
#ifdef DEBUG_PHY_PROC
- LOG_I(PHY,"[UE %d][DCI][PDSCH %x] frame %d, subframe %d: format %d, num_pdcch_symbols %d, nCCE %d, total CCEs %d\n",
+ LOG_D(PHY,"[UE %d][DCI][PDSCH %x] frame %d, subframe %d: format %d, num_pdcch_symbols %d, nCCE %d, total CCEs %d\n",
phy_vars_ue->Mod_id,dci_alloc_rx[i].rnti,
frame_rx,subframe_rx,
dci_alloc_rx[i].format,
@@ -2090,7 +2099,7 @@ int lte_ue_pdcch_procedures(uint8_t eNB_id,PHY_VARS_UE *phy_vars_ue,uint8_t abst
// we received a CRNTI, so we're in PUSCH
if (phy_vars_ue->UE_mode[eNB_id] != PUSCH) {
#ifdef DEBUG_PHY_PROC
- LOG_I(PHY,"[UE %d] Frame %d, subframe %d: Received DCI with CRNTI %x => Mode PUSCH\n",phy_vars_ue->Mod_id,frame_rx,subframe_rx,phy_vars_ue->lte_ue_pdcch_vars[eNB_id]->crnti);
+ LOG_D(PHY,"[UE %d] Frame %d, subframe %d: Received DCI with CRNTI %x => Mode PUSCH\n",phy_vars_ue->Mod_id,frame_rx,subframe_rx,phy_vars_ue->lte_ue_pdcch_vars[eNB_id]->crnti);
#endif
//dump_dci(&phy_vars_ue->lte_frame_parms, &dci_alloc_rx[i]);
phy_vars_ue->UE_mode[eNB_id] = PUSCH;