diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt
index bfc22b25b0cb437d69cf00ec761597c80ef55ade..77d2e7b1bab75283d4afee3cbcde5f999953abca 100644
--- a/cmake_targets/CMakeLists.txt
+++ b/cmake_targets/CMakeLists.txt
@@ -66,7 +66,6 @@ if(SUBVERSION_FOUND)
Subversion_WC_INFO(${OPENAIR_DIR} openair)
set (FIRMWARE_VERSION "${openair_WC_REVISION} - ${openair_WC_LAST_CHANGED_DATE}")
Subversion_WC_LOG(${OPENAIR_DIR} Project)
- message("Last changed log is ${Project_LAST_CHANGED_LOG}")
else()
set (FIRMWARE_VERSION "No svn information")
endif()
@@ -1310,7 +1309,7 @@ list(APPEND nasmesh_src device.c common.c ioctl.c classifier.c tool.c mesh.c)
set(module_cc_opt "${module_cc_opt}")
make_driver(nasmesh ${OPENAIR2_DIR}/NAS/DRIVER/MESH ${nasmesh_src})
-# Variation of the same driver (logic????)
+# ???
####################
list(APPEND oai_nw_drv_src device.c common.c ioctl.c classifier.c tool.c)
if(OAI_NW_DRIVER_USE_NETLINK)
@@ -1318,6 +1317,14 @@ if(OAI_NW_DRIVER_USE_NETLINK)
endif()
make_driver(oai_nw_drv ${OPENAIR2_DIR}/NAS/DRIVER/LITE ${oai_nw_drv_src})
+# Exmimo board drivers
+#########################
+list(APPEND openair_rf_src module_main.c irq.c fileops.c exmimo_fw.c)
+make_driver(openair_rf ${OPENAIR_TARGETS}/ARCH/EXMIMO/DRIVER/eurecom ${openair_rf_src})
+
+add_executable(updatefw
+ ${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw.c
+)
# add the install targets
#install (TARGETS Tutorial DESTINATION bin)
diff --git a/cmake_targets/build_oai.bash b/cmake_targets/build_oai.bash
new file mode 100755
index 0000000000000000000000000000000000000000..3f1dec88aaf70159e421e174326cf8b0ebcaab7f
--- /dev/null
+++ b/cmake_targets/build_oai.bash
@@ -0,0 +1,588 @@
+#!/bin/bash
+################################################################################
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+#
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) anylater version.
+#
+#
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@eurecom.fr
+#
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+#
+################################################################################
+# file build_oai.bash
+# brief OAI automated build tool that can be used to install, compile, run OAI.
+# author Navid Nikaein, Lionel GAUTHIER, Laurent Thomas
+
+
+################################
+# include helper functions
+################################
+THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
+source $THIS_SCRIPT_PATH/build_helper.bash
+
+#EMULATION_DEV_INTERFACE="eth0"
+#EMULATION_MULTICAST_GROUP=1
+#EMULATION_DEV_ADDRESS=`ifconfig $EMULATION_DEV_INTERFACE | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'`
+
+TARGET="ALL"
+XFORMS="False"
+VCD_TIMING="False"
+REL="Rel10"
+HW="EXMIMO"
+
+until [ -z "$1" ]
+ do
+ case "$1" in
+ -c | --clean)
+ CLEAN=1
+ echo "Will re-compile ALL"
+ shift;
+ ;;
+ --clean-iptables)
+ CLEAN_IPTABLES=1;
+ shift;
+ ;;
+ -C | --config-file)
+ CONFIG_FILE=$2
+ # may be relative path
+ if [ -f $(dirname $(readlink -f $0))/$CONFIG_FILE ]; then
+ CONFIG_FILE=$(dirname $(readlink -f $0))/$CONFIG_FILE
+ echo "setting config file to: $CONFIG_FILE"
+ CONFIG_FILE_ACCESS_OK=1
+ else
+ # may be absolute path
+ if [ -f $CONFIG_FILE ]; then
+ echo "setting config file to: $CONFIG_FILE"
+ CONFIG_FILE_ACCESS_OK=1
+ else
+ echo "config file not found"
+ exit 1
+ fi
+ fi
+ shift 2;
+ ;;
+ -D | --disable-check-installed-software)
+ DISABLE_CHECK_INSTALLED_SOFTWARE=1
+ echo "disable check installed software"
+ shift;
+ ;;
+ -g | --run-with-gdb)
+ GDB=1
+ echo "Running with gdb"
+ shift;
+ ;;
+ -K | --itti-dump-file)
+ ITTI_ANALYZER=1
+ ITTI_DUMP_FILE=$2
+ echo "setting ITTI dump file to: $ITTI_DUMP_FILE"
+ EXE_ARGUMENTS="$EXE_ARGUMENTS -K $ITTI_DUMP_FILE"
+ shift 2;
+ ;;
+ -l | --build-target)
+ TARGET=$2
+ echo "setting top-level build target to: $2"
+ shift 2;
+ ;;
+ -h | --help)
+ print_help
+ exit 1
+ ;;
+ -r | --3gpp-release)
+ REL=$2
+ echo "setting release to: $REL"
+ shift 2 ;
+ ;;
+ -s | --check)
+ OAI_TEST=1
+ echo "setting sanity check to: $OAI_TEST"
+ shift;
+ ;;
+ -V | --vcd)
+ echo "setting gtk-wave output"
+ VCD_TIMING=1
+ EXE_ARGUMENTS="$EXE_ARGUMENTS -V"
+ shift ;
+ ;;
+ -w | --hardware)
+ HW="$2" #"${i#*=}"
+ echo "setting hardware to: $HW"
+ shift 2 ;
+ ;;
+ -x | --xforms)
+ XFORMS=1
+ EXE_ARGUMENTS="$EXE_ARGUMENTS -d"
+ echo "setting xforms to: $XFORMS"
+ shift;
+ ;;
+ *)
+ echo "Unknown option $1"
+ break ;
+ ;;
+ esac
+done
+
+################################
+# cleanup first
+################################
+echo_info "1. Cleaning ..."
+
+if [ "$CLEAN_IPTABLES" == "1" ] ; then
+ echo_info "Flushing iptables..."
+ $SUDO modprobe ip_tables
+ $SUDO modprobe x_tables
+ $SUDO iptables -P INPUT ACCEPT
+ $SUDO iptables -F INPUT
+ $SUDO iptables -P OUTPUT ACCEPT
+ $SUDO iptables -F OUTPUT
+ $SUDO iptables -P FORWARD ACCEPT
+ $SUDO iptables -F FORWARD
+ $SUDO iptables -t nat -F
+ $SUDO iptables -t mangle -F
+ $SUDO iptables -t filter -F
+ $SUDO iptables -t raw -F
+ echo_info "Flushed iptables"
+fi
+
+
+############################################
+# setting and printing OAI envs, we should check here
+############################################
+
+echo_info "2. Setting the OAI PATHS ..."
+
+set_openair_env
+cecho "OPENAIR_HOME = $OPENAIR_HOME" $green
+cecho "OPENAIR1_DIR = $OPENAIR1_DIR" $green
+cecho "OPENAIR2_DIR = $OPENAIR2_DIR" $green
+cecho "OPENAIR3_DIR = $OPENAIR3_DIR" $green
+cecho "OPENAIRCN_DIR = $OPENAIRCN_DIR" $green
+cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green
+
+dbin=$OPENAIR_HOME/cmake_targets/bin
+dlog=$OPENAIR_HOME/cmake_targets/log
+
+if [ "$CLEAN" == "1" ] ; then
+ rm -rf $OPENAIR_DIR/cmake_targets/*/build $dbin $dlog
+ echo_info "deleted all compilation results"
+fi
+mkdir -p $dbin $dlog
+
+if [ "$DISABLE_CHECK_INSTALLED_SOFTWARE" != "1" ] ; then
+ check_install_oai_software
+ make_certs
+ check_epc_s6a_certificate
+ check_hss_s6a_certificate
+ if [ "$HW" == "USRP" ] ; then
+ check_install_usrp_uhd_driver
+ fi
+fi
+
+echo_info "3. building the compilation directives ..."
+
+if [ "$TARGET" = "ALL" -o "$TARGET" = "SOFTMODEM" ] ; then
+ DIR=$OPENAIR_HOME/cmake_targets
+
+ # LTE softmodem compilation
+ mkdir -p $DIR/lte_build_oai
+ cmake_file=$DIR/lte_build_oai/CMakeLists.txt
+ echo "cmake_minimum_required(VERSION 2.8)" > $cmake_file
+ echo "set(XFORMS $XFORMS )" >> $cmake_file
+ echo "set(RRC_ASN1_VERSION \"${REL}\")" >> $cmake_file
+ echo "set(ENABLE_VCD_FIFO $VCD_TIMING )" >> $cmake_file
+ echo "set(RF_BOARD \"${HW}\")" >> $cmake_file
+ echo 'set(PACKAGE_NAME "lte-softmodem")' >> $cmake_file
+ echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
+
+ if compilations lte_build_oai lte-softmodem lte-softmodem $dbin/lte-softmodem.$REL \
+ > $dlog/lte-softmodem.$REL.txt 2>&1 ; then
+ echo_success "lte-softmodem compiled"
+ else
+ echo_error "lte-softmodem compilation failed"
+ fi
+
+ # nasmesh driver compilation
+ if compilations lte_build_oai nasmesh CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesk.ko \
+ > $dlog/nasmesh.txt 2>&1 ; then
+ echo_success "nasmesh driver compiled"
+ else
+ echo_error "nasmesh driver compilation failed"
+ fi
+
+ # lte unitary simulators compilation
+ simlist="dlsim ulsim pucchsim prachsim pdcchsim pbchsim mbmssim"
+ log=$dlog/lte-simulators.log
+ cd $OPENAIR_DIR/cmake_targets/lte-simulators
+ mkdir -p build
+ cd build
+ rm -f *sim
+ cmake .. > $log 2>&1
+ make -j4 $simlist > $log 2>&1
+ for f in $simlist ; do
+ if [ -s $f ] ; then
+ echo_success "$f compiled"
+ cp $f $OPENAIR_DIR/cmake_targets/tests/bin
+ else
+ echo_error "$f compilation failed"
+ fi
+ done
+
+ # EXMIMO drivers & firmware loader
+ if [ "$HW" = "EXMIMO" ] ; then
+ if compilations lte_build_oai openair_rf CMakeFiles/openair_rf/openair_rf.ko $dbin/openair_rf.ko \
+ > $dlog/openair_rf.txt 2>&1 ; then
+ echo_success "EXMIMO driver compiled"
+ else
+ echo_error "EXMIMO driver compilation failed"
+ fi
+ if compilations lte_build_oai updatefw updatefw $dbin/updatefw \
+ > $dlog/updatefw.txt 2>&1 ; then
+ echo_success "EXMIMO firmware loader compiled"
+ else
+ echo_error "EXMIMO firmware loader compilation failed"
+ fi
+ fi
+
+ # TBD: oasim compilation
+ cmake_file=$DIR/oaisim_build_oai/CMakeLists.txt
+ cp $DIR/oaisim_build_oai/CMakeLists.template $cmake_file
+ echo "set(XFORMS $XFORMS )" >> $cmake_file
+ echo "set(RRC_ASN1_VERSION \"${REL}\")" >> $cmake_file
+ echo "set(ENABLE_VCD_FIFO $VCD_TIMING )" >> $cmake_file
+ echo "set(RF_BOARD \"${HW}\")" >> $cmake_file
+ echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
+
+ if compilations oaisim_build_oai oaisim oaisim $dbin/oaisim.$REL \
+ > $dlog/oaisim.$REL.txt 2>&1 ; then
+ echo_success "oaisim compiled"
+ else
+ echo_error "oaisim compilation failed"
+ fi
+
+fi
+exit 0
+
+build_epc(){
+
+ epc_compiled=1
+
+ echo_info "Note: this scripts tested only on Ubuntu 14.04x64"
+
+######################################
+# CHECK MISC SOFTWARES AND LIBS #
+######################################
+ if [ $DISABLE_CHECK_INSTALLED_SOFTWARE -eq 0 ]; then
+ echo_info "4. Checking the the required softwares/packages for EPC..."
+
+ check_install_epc_software
+ check_install_asn1c
+ if [ $OAI_CLEAN -eq 1 ]; then
+ check_install_freediamter
+ else
+ if [ ! -d /usr/local/etc/freeDiameter ]; then
+ check_install_freediamter
+ fi
+ fi
+ else
+ echo_info "4. Not checking the required softwares/packages for EPC"
+ fi
+
+###########################################
+# configure and compile
+##########################################
+
+ echo_info "5. configure and compile epc"
+
+ output=$(compile_epc $OAI_CLEAN >> $OPENAIR_TARGETS/bin/install_log.txt 2>&1 )
+ epc_compiled=$?
+ if [ $epc_compiled -ne 0 ]; then
+ echo_error "EPC compilation failed : check the installation log file bin/install_log.txt"
+ exit 1
+ fi
+ check_for_epc_executable
+ echo_info "finished epc target: check the installation log file bin/install_log.txt"
+
+ if [ $CONFIG_FILE_ACCESS_OK -eq 0 ]; then
+ echo_error "You have to provide a EPC config file"
+ exit 1
+ fi
+
+ TEMP_FILE=`tempfile`
+ VARIABLES=" S6A_CONF\|\
+ HSS_HOSTNAME\|\
+ REALM"
+
+ VARIABLES=$(echo $VARIABLES | sed -e 's/\\r//g')
+ VARIABLES=$(echo $VARIABLES | tr -d ' ')
+ cat $CONFIG_FILE | grep -w "$VARIABLES"| tr -d " " | tr -d ";" > $TEMP_FILE
+ source $TEMP_FILE
+ rm -f $TEMP_FILE
+
+ if [ x"$REALM" == "x" ]; then
+ echo_error "Your config file do not contain a REALM for S6A configuration"
+ exit 1
+ fi
+ if [ x"$S6A_CONF" != "x./epc_s6a.conf" ]; then
+ echo_error "Your config file do not contain the good path for the S6A config file,"
+ echo_error "accordingly to what is done in this script, it should be set to epc_s6a.conf"
+ exit 1
+ fi
+
+ check_epc_s6a_certificate $REALM
+
+###########################################
+# install the binary in bin
+##########################################
+
+ echo_info "6. install the binary file"
+
+ if [ $epc_compiled -eq 0 ]; then
+ echo_success "target epc built and installed in the bin directory"
+ echo "target epc built and installed in the bin directory" >> bin/${oai_build_date}
+ cp -f $CONFIG_FILE $OPENAIR_TARGETS/bin
+ cp -f $OPENAIRCN_DIR/objs/UTILS/CONF/s6a.conf $OPENAIR_TARGETS/bin/epc_s6a.conf
+ fi
+}
+
+build_hss(){
+ echo_info "Note: this script tested only for Ubuntu 12.04 x64 -> 14.04 x64"
+
+######################################
+# CHECK MISC SOFTWARES AND LIBS #
+######################################
+ if [ $DISABLE_CHECK_INSTALLED_SOFTWARE -eq 0 ]; then
+ echo_info "4. check the required packages for HSS"
+ check_install_hss_software
+ if [ $OAI_CLEAN -eq 1 ]; then
+ check_install_freediamter
+ else
+ if [ ! -d /usr/local/etc/freeDiameter ]; then
+ check_install_freediamter
+ fi
+ fi
+ else
+ echo_info "4. Not checking the required packages for HSS"
+ fi
+
+
+######################################
+# compile HSS #
+######################################
+ echo_info "5. compile HSS"
+
+ # Bad behaviour of $OAI_CLEAN with ./.lock_oaibuild ...
+ compile_hss $CLEAN_HSS
+ hss_compiled=$?
+ check_for_hss_executable
+ echo_info "finished hss target"
+
+######################################
+# Check certificates #
+######################################
+
+ TEMP_FILE=`tempfile`
+ cat $OPENAIRCN_DIR/OPENAIRHSS/conf/hss_fd.conf | grep -w "Identity" | tr -d " " | tr -d ";" > $TEMP_FILE
+ cat $OPENAIRCN_DIR/OPENAIRHSS/conf/hss.conf | grep -w "MYSQL_user" | tr -d " " | tr -d ";" >> $TEMP_FILE
+ cat $OPENAIRCN_DIR/OPENAIRHSS/conf/hss.conf | grep -w "MYSQL_pass" | tr -d " " | tr -d ";" >> $TEMP_FILE
+ cat $OPENAIRCN_DIR/OPENAIRHSS/conf/hss.conf | grep -w "MYSQL_db" | tr -d " " | tr -d ";" >> $TEMP_FILE
+ source $TEMP_FILE
+ rm -f $TEMP_FILE
+
+ if [ x"$Identity" == "x" ]; then
+ echo_error "Your config file do not contain a host identity for S6A configuration"
+ exit 1
+ fi
+ HSS_REALM=$(echo $Identity | sed 's/.*\.//')
+ HSS_HOSTNAME=${Identity%.$HSS_REALM}
+ NEW_HOSTNAME=`hostname -s`
+ if [ "x$HSS_HOSTNAME" != "x$NEW_HOSTNAME" ]; then
+ echo_warning "Changing identity of HSS from <$HSS_HOSTNAME.$HSS_REALM> to <$NEW_HOSTNAME.$HSS_REALM>"
+ sed -ibak "s/$HSS_HOSTNAME/$NEW_HOSTNAME/" $OPENAIRCN_DIR/OPENAIRHSS/conf/hss_fd.conf
+ fi
+ check_hss_s6a_certificate $HSS_REALM
+
+######################################
+# fill the HSS DB
+######################################
+ echo_info "6. create HSS database (for EURECOM SIM CARDS)"
+ hss_db_created=1
+ create_hss_database $OAI_DB_ADMIN_USER_NAME $OAI_DB_ADMIN_USER_PASSWORD $MYSQL_user $MYSQL_pass $MYSQL_db
+ if [ $? -eq 1 ]; then
+ echo_fatal "hss DB not created"
+ fi
+}
+
+
+
+
+echo_info "3. set the top-level build target"
+case "$BUILD_LTE" in
+ 'ENB')
+ echo_success "build LTE eNB"
+ build_enb
+ ;;
+ 'EPC')
+ echo_success "build EPC(MME and xGW)"
+ build_epc
+ ;;
+ 'HSS')
+ echo_success "build HSS"
+ build_hss
+ ;;
+ 'NONE')
+ ;;
+ *)
+ ;;
+esac
+
+# Additional operation
+
+############################################
+# Generate doxygen documentation
+############################################
+
+if [ $DOXYGEN = 1 ]; then
+ echo_info "9. Generate doxygen documentation ..."
+ doxygen $OPENAIR_TARGETS/DOCS/Doxyfile
+ echo_info "9.1 use your navigator to open $OPENAIR_TARGETS/DOCS/html/index.html "
+else
+ echo_info "9. Bypassing doxygen documentation ..."
+fi
+
+
+############################################
+# testing
+############################################
+
+if [ $OAI_TEST -eq 1 ]; then
+ echo_info "10. Running OAI pre commit tests (pre-ci) ..."
+ python $OPENAIR_TARGETS/TEST/OAI/test01.py -l
+else
+ echo_info "10. Bypassing the Tests ..."
+fi
+
+############################################
+# run
+############################################
+
+if [ $RUN -ne 0 ]; then
+ echo_info "11. Running ..."
+ cd $OPENAIR_TARGETS/bin
+ case "$BUILD_LTE" in
+ 'ENB')
+ if [ $TARGET == "SOFTMODEM" ]; then
+ if [ $HW == "EXMIMO" ]; then
+ $SUDO chmod 777 $OPENAIR_TARGETS/RT/USER/init_exmimo2.sh
+ $SUDO $OPENAIR_TARGETS/RT/USER/init_exmimo2.sh
+ fi
+ echo "############# running ltesoftmodem #############"
+ if [ $RUN_GDB -eq 0 ]; then
+ $SUDO $OPENAIR_TARGETS/bin/lte-softmodem `echo $EXE_ARGUMENTS`
+ else
+ $SUDO setenv MALLOC_CHECK_ 2
+ $SUDO touch ~/.gdb_lte_softmodem
+ $SUDO echo "file $OPENAIR_TARGETS/bin/lte-softmodem" > ~/.gdb_lte_softmodem
+ $SUDO echo "set args $EXE_ARGUMENTS" >> ~/.gdb_lte_softmodem
+ $SUDO echo "run" >> ~/.gdb_lte_softmodem
+ $SUDO gdb -nh -x ~/.gdb_lte_softmodem 2>&1
+ fi
+
+ elif [ $TARGET == "OAISIM" ]; then
+
+ if [ $ENB_S1 -eq 0 ]; then
+ install_nasmesh
+ else
+ # prepare NAS for UE
+ if [ ! -f .ue.nvram ]; then
+ echo_success "generate .ue_emm.nvram .ue.nvram"
+ $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/ue_data --gen
+ fi
+
+ if [ ! -f .usim.nvram ]; then
+ echo_success "generate .usim.nvram"
+ $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/usim_data --gen
+ fi
+ $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/ue_data --print
+ $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/usim_data --print
+
+ insmod $OPENAIR2_DIR/NETWORK_DRIVER/UE_IP/ue_ip.ko
+
+ fi
+
+ if [ $RUN_GDB -eq 0 ]; then
+ $SUDO exec $OPENAIR_TARGETS/bin/oaisim `echo $EXE_ARGUMENTS`
+ else
+ $SUDO setenv MALLOC_CHECK_ 2
+ $SUDO touch ~/.gdb_oaisim
+ $SUDO echo "file $OPENAIR_TARGETS/bin/lte-oaisim" > ~/.gdb_oaisim
+ $SUDO echo "set args $EXE_ARGUMENTS" >> ~/.gdb_oaisim
+ $SUDO echo "run" >> ~/.gdb_oaisim
+ $SUDO gdb -nh -x ~/.gdb_oaisim 2>&1
+ fi
+ fi
+ ;;
+
+
+ 'EPC')
+ echo "############# running EPC #############"
+ test_is_host_reachable $HSS_HOSTNAME.$REALM HSS
+ if [ $RUN_GDB -eq 0 ]; then
+ $SUDO $OPENAIR_TARGETS/bin/oai_epc `echo $EXE_ARGUMENTS`
+ else
+ touch ~/.gdb_epc
+ chmod 777 ~/.gdb_epc
+ echo "file $OPENAIR_TARGETS/bin/oai_epc" > ~/.gdb_epc
+ echo "set args $EXE_ARGUMENTS" >> ~/.gdb_epc
+ echo "run" >> ~/.gdb_epc
+ $SUDO gdb -nh -x ~/.gdb_epc 2>&1
+ fi
+ ;;
+
+
+ 'HSS')
+ echo "############# running HSS #############"
+ cd $OPENAIRCN_DIR/OPENAIRHSS/objs
+ if [ $RUN_GDB -eq 0 ]; then
+ $SUDO exec ./openair-hss -c ./conf/hss.conf
+ else
+ touch ~/.gdb_hss
+ chmod 777 ~/.gdb_hss
+ echo "file ./openair-hss" > ~/.gdb_hss
+ echo "set args -c ./conf/hss.conf" >> ~/.gdb_hss
+ echo "run" >> ~/.gdb_hss
+ $SUDO gdb -nh -x ~/.gdb_hss 2>&1
+ fi
+ ;;
+
+
+ 'NONE')
+ ;;
+
+
+ *)
+ echo_error "Unknown option $BUILD_LTE: do not execute"
+ ;;
+ esac
+else
+ echo_info "11. No run requested, end of script"
+ exit 0
+fi
+
+
diff --git a/cmake_targets/lte_build_oai/CMakeLists.txt b/cmake_targets/lte_build_oai/CMakeLists.txt
new file mode 100644
index 0000000000000000000000000000000000000000..031f59f62f9476c580ae6d0ffaee02d623aa9d5a
--- /dev/null
+++ b/cmake_targets/lte_build_oai/CMakeLists.txt
@@ -0,0 +1,7 @@
+cmake_minimum_required(VERSION 2.8)
+set(XFORMS False )
+set(RRC_ASN1_VERSION "Rel10")
+set(ENABLE_VCD_FIFO False )
+set(RF_BOARD "EXMIMO")
+set(PACKAGE_NAME "lte-softmodem")
+include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)
diff --git a/cmake_targets/oaisim_build_oai/CMakeLists.template b/cmake_targets/oaisim_build_oai/CMakeLists.template
new file mode 100644
index 0000000000000000000000000000000000000000..ed5aa068793ae07eb9b99b37058946e6f65ba0a9
--- /dev/null
+++ b/cmake_targets/oaisim_build_oai/CMakeLists.template
@@ -0,0 +1,70 @@
+cmake_minimum_required(VERSION 2.8)
+
+set(ADDR_CONF False)
+set(ASSERT True)
+set(DEBUG_OMG False)
+set(DRIVER2013 True)
+set(ENABLE_FXP True)
+set(ENABLE_ITTI True)
+set(ENABLE_NAS_UE_LOGGING True)
+set(ENABLE_NEW_MULTICAST True)
+set(ENABLE_PDCP_NETLINK_FIFO False)
+set(ENABLE_PGM_TRANSPORT True)
+set(ENABLE_RAL False)
+set(ENABLE_SECURITY True)
+set(ENABLE_USE_CPU_EXECUTION_TIME True)
+set(ENABLE_USE_MME True)
+set(HARD_RT False)
+set(JUMBO_FRAME False)
+set(LARGE_SCALE False)
+set(LINK_PDCP_TO_GTPV1U True)
+set(LINUX_LIST False)
+set(LINUX True)
+set(LOCALIZATION False)
+set(LOG_NO_THREAD True)
+set(LOWLATENCY True)
+set(MAC_CONTEXT 1)
+set(MAX_NUM_CCs 1)
+set(MIH_C_MEDIEVAL_EXTENSIONS True)
+set(MSG_PRINT False)
+set(MU_RECEIVER False)
+set(NAS_ADDRESS_FIX true)
+set(NAS_NETLINK False)
+set(NAS_UE False)
+set(NEW_FFT True)
+set(NO_RRM True)
+set(OAI_EMU True)
+set(OAISIM True)
+set(OAI_NW_DRIVER_TYPE_ETHERNET False)
+set(OPENAIR1 True)
+set(OPENAIR2 True)
+set(OPENAIR_EMU False)
+set(OPENAIR_LTE True)
+set(PACKAGE_NAME "oaisim")
+set(PBS_SIM False)
+set(PC_DSP True)
+set(PC_TARGET True)
+set(PDCP_MSG_PRINT False)
+set(PERFECT_CE False)
+set(PHY_ABSTRACTION False)
+set(PHY_ABSTRACTION False)
+set(PHY_EMUL False)
+set(PHYSIM True)
+set(PUCCH True)
+set(RANDOM_BF False)
+set(RF_BOARD "EXMIMO")
+set(RLC_STOP_ON_LOST_PDU False)
+set(RRC_ASN1_VERSION False)
+set(RRC_ASN1_VERSION "Rel10")
+set(RRC_MSG_PRINT False)
+set(RTAI False)
+set(SECU False)
+set(SMBV False)
+set(SPECTRA False)
+set(TEST_OMG False)
+set(UE_BUILD False)
+set(USE_3GPP_ADDR_AS_LINK_ADDR False)
+set(USE_MME False)
+set(USER_MODE True)
+set(XER_PRINT False)
+
diff --git a/cmake_targets/oaisim_build_oai/CMakeLists.txt b/cmake_targets/oaisim_build_oai/CMakeLists.txt
new file mode 100644
index 0000000000000000000000000000000000000000..403f2290aa11f10b2422e1fa229b66a20a7aca70
--- /dev/null
+++ b/cmake_targets/oaisim_build_oai/CMakeLists.txt
@@ -0,0 +1,75 @@
+cmake_minimum_required(VERSION 2.8)
+
+set(ADDR_CONF False)
+set(ASSERT True)
+set(DEBUG_OMG False)
+set(DRIVER2013 True)
+set(ENABLE_FXP True)
+set(ENABLE_ITTI True)
+set(ENABLE_NAS_UE_LOGGING True)
+set(ENABLE_NEW_MULTICAST True)
+set(ENABLE_PDCP_NETLINK_FIFO False)
+set(ENABLE_PGM_TRANSPORT True)
+set(ENABLE_RAL False)
+set(ENABLE_SECURITY True)
+set(ENABLE_USE_CPU_EXECUTION_TIME True)
+set(ENABLE_USE_MME True)
+set(HARD_RT False)
+set(JUMBO_FRAME False)
+set(LARGE_SCALE False)
+set(LINK_PDCP_TO_GTPV1U True)
+set(LINUX_LIST False)
+set(LINUX True)
+set(LOCALIZATION False)
+set(LOG_NO_THREAD True)
+set(LOWLATENCY True)
+set(MAC_CONTEXT 1)
+set(MAX_NUM_CCs 1)
+set(MIH_C_MEDIEVAL_EXTENSIONS True)
+set(MSG_PRINT False)
+set(MU_RECEIVER False)
+set(NAS_ADDRESS_FIX true)
+set(NAS_NETLINK False)
+set(NAS_UE False)
+set(NEW_FFT True)
+set(NO_RRM True)
+set(OAI_EMU True)
+set(OAISIM True)
+set(OAI_NW_DRIVER_TYPE_ETHERNET False)
+set(OPENAIR1 True)
+set(OPENAIR2 True)
+set(OPENAIR_EMU False)
+set(OPENAIR_LTE True)
+set(PACKAGE_NAME "oaisim")
+set(PBS_SIM False)
+set(PC_DSP True)
+set(PC_TARGET True)
+set(PDCP_MSG_PRINT False)
+set(PERFECT_CE False)
+set(PHY_ABSTRACTION False)
+set(PHY_ABSTRACTION False)
+set(PHY_EMUL False)
+set(PHYSIM True)
+set(PUCCH True)
+set(RANDOM_BF False)
+set(RF_BOARD "EXMIMO")
+set(RLC_STOP_ON_LOST_PDU False)
+set(RRC_ASN1_VERSION False)
+set(RRC_ASN1_VERSION "Rel10")
+set(RRC_MSG_PRINT False)
+set(RTAI False)
+set(SECU False)
+set(SMBV False)
+set(SPECTRA False)
+set(TEST_OMG False)
+set(UE_BUILD False)
+set(USE_3GPP_ADDR_AS_LINK_ADDR False)
+set(USE_MME False)
+set(USER_MODE True)
+set(XER_PRINT False)
+
+set(XFORMS False )
+set(RRC_ASN1_VERSION "Rel10")
+set(ENABLE_VCD_FIFO False )
+set(RF_BOARD "EXMIMO")
+include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)