Commit 0f8c35ae authored by Chirag Gandhi's avatar Chirag Gandhi
Browse files

Patch applied for MCS over command line

Config file changes
parent 668bb056
......@@ -568,7 +568,9 @@ void pf_dl(module_id_t module_id,
continue;
/* Calculate coeff */
sched_pdsch->mcs = 9;
//sched_pdsch->mcs = 9;
extern uint32_t target_dl_mcs;
sched_pdsch->mcs = target_dl_mcs;
uint32_t tbs = pf_tbs[ps->mcsTableIdx][sched_pdsch->mcs];
coeff_ue[UE_id] = (float) tbs / thr_ue[UE_id];
LOG_D(MAC,"b %d, thr_ue[%d] %f, tbs %d, coeff_ue[%d] %f\n",
......
......@@ -95,7 +95,7 @@ gNBs =
zeroCorrelationZoneConfig = 13;
#preambleReceivedTargetPower = -118;
#preambleReceivedTargetPower = -104;
preambleReceivedTargetPower = -108;
preambleReceivedTargetPower = -110;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
......@@ -140,7 +140,7 @@ gNBs =
msg3_DeltaPreamble = 1;
#p0_NominalWithGrant =-90;
p0_NominalWithGrant =-118;
p0_NominalWithGrant =-110;
# pucch-ConfigCommon setup :
# pucchGroupHopping
......@@ -148,7 +148,7 @@ gNBs =
pucchGroupHopping = 0;
hoppingId = 40;
#p0_nominal = -90;
p0_nominal = -118;
p0_nominal = -110;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
......@@ -197,7 +197,7 @@ gNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.18.150"; #"192.168.18.99";
mme_ip_address = ( { ipv4 = "192.168.61.67";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -221,9 +221,9 @@ gNBs =
{
GNB_INTERFACE_NAME_FOR_S1_MME = "eth0";
GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.18.187/24";
GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.1.150/24";
GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_IPV4_ADDRESS_FOR_S1U = "192.168.18.187/24";
GNB_IPV4_ADDRESS_FOR_S1U = "192.168.1.150/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
GNB_IPV4_ADDRESS_FOR_X2C = "127.0.0.2/24";
GNB_PORT_FOR_X2C = 36422; # Spec 36422
......@@ -262,7 +262,7 @@ RUs = (
clock_src = "external";
local_if_name = "dpdk";
sdr_addrs = "softmodem -m 2048 -l 34 -n 3 -b 0000:81:00.2 --proc-type auto --file-prefix hhh -- -p 0x1";
sdr_addrs = "softmodem -m 2048 -l 6 -n 3 -b 0000:3b:00.1 --proc-type auto --file-prefix hhh -- -p 0x1";
remote_address = "127.0.0.2";
local_address = "127.0.0.1";
local_portc = 50000;
......@@ -277,10 +277,10 @@ RUs = (
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
//parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
parallel_config = "PARALLEL_SINGLE_THREAD";
parallel_config = "PARALLEL_RU_L1_SPLIT";
//parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_DISABLE";
worker_config = "WORKER_ENABLE";
}
);
......@@ -293,7 +293,7 @@ THREAD_STRUCT = (
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
mac_log_verbosity ="medium";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment