Commit 25d7eb6c authored by Mohammed Ismail's avatar Mohammed Ismail
Browse files

CI: adding physim imgae build


Signed-off-by: default avatarMohammed Ismail <mohammed.ismail@openairinterface.org>
parent 1f3513b1
......@@ -144,6 +144,8 @@ class Containerize():
imageNames.append(('oai-gnb', 'gNB'))
imageNames.append(('oai-lte-ue', 'lteUE'))
imageNames.append(('oai-nr-ue', 'nrUE'))
if self.host == 'Red Hat':
imageNames.append(('oai-physim', 'phySim'))
if len(imageNames) == 0:
imageNames.append(('oai-enb', 'eNB'))
......
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL8
#
#---------------------------------------------------------------------
FROM localhost/ran-build:develop AS phy-sim-build
RUN rm -Rf /oai-ran
WORKDIR /oai-ran
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --phy_simulators --ninja --verbose-ci
#start from scratch for target executable
FROM registry.access.redhat.com/ubi8/ubi:latest as oai-physim
RUN yum update -y && \
yum install -y --enablerepo="ubi-8-codeready-builder" \
lksctp-tools \
nettle \
atlas \
hostname \
sudo \
procps-ng \
net-tools \
iputils \
bc \
iproute \
libyaml && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
WORKDIR /opt/oai-physim/targets/bin
COPY --from=phy-sim-build /oai-ran/targets/bin/dlsim.Rel15 .
COPY --from=phy-sim-build /oai-ran/targets/bin/nr_dlsim.Rel15 .
COPY --from=phy-sim-build /oai-ran/targets/bin/nr_prachsim.Rel15 .
COPY --from=phy-sim-build /oai-ran/targets/bin/nr_ulschsim.Rel15 .
COPY --from=phy-sim-build /oai-ran/targets/bin/polartest.Rel15 .
COPY --from=phy-sim-build /oai-ran/targets/bin/ulsim.Rel15 .
COPY --from=phy-sim-build /oai-ran/targets/bin/ldpctest.Rel15 .
COPY --from=phy-sim-build /oai-ran/targets/bin/nr_dlschsim.Rel15 .
COPY --from=phy-sim-build /oai-ran/targets/bin/nr_pbchsim.Rel15 .
COPY --from=phy-sim-build /oai-ran/targets/bin/nr_pucchsim.Rel15 .
COPY --from=phy-sim-build /oai-ran/targets/bin/nr_ulsim.Rel15 .
COPY --from=phy-sim-build /oai-ran/targets/bin/smallblocktest.Rel15 .
WORKDIR /usr/local/lib/
COPY --from=phy-sim-build /oai-ran/targets/bin/libcoding.so .
COPY --from=phy-sim-build /lib64/liblapacke.so.3 .
COPY --from=phy-sim-build /lib64/libX11.so.6 .
COPY --from=phy-sim-build /lib64/libXpm.so.4 .
COPY --from=phy-sim-build /lib64/libxcb.so.1 .
COPY --from=phy-sim-build /lib64/libXau.so.6 .
COPY --from=phy-sim-build /lib64/libforms.so.2 .
COPY --from=phy-sim-build /lib64/libblas.so.3 .
COPY --from=phy-sim-build /lib64/liblapack.so.3 .
COPY --from=phy-sim-build /lib64/libexslt.so.0 .
COPY --from=phy-sim-build /lib64/libxslt.so.1 .
COPY --from=phy-sim-build /oai-ran/cmake_targets/phy_simulators/build/libdfts.so .
COPY --from=phy-sim-build /oai-ran/cmake_targets/phy_simulators/build/libSIMU.so .
COPY --from=phy-sim-build /oai-ran/cmake_targets/phy_simulators/build/libldpc.so .
COPY --from=phy-sim-build /oai-ran/cmake_targets/phy_simulators/build/libldpc_orig.so .
RUN ldconfig
#debug
#RUN ldd /opt/oai-physim/targets/bin/dlsim.Rel15
#RUN ldd /opt/oai-physim/targets/bin/nr_dlsim.Rel15
#RUN ldd /opt/oai-physim/targets/bin/nr_prachsim.Rel15
#RUN ldd /opt/oai-physim/targets/bin/nr_ulschsim.Rel15
#RUN ldd /opt/oai-physim/targets/bin/polartest.Rel15
#RUN ldd /opt/oai-physim/targets/bin/ulsim.Rel15
#RUN ldd /opt/oai-physim/targets/bin/ldpctest.Rel15
#RUN ldd /opt/oai-physim/targets/bin/nr_dlschsim.Rel15
#RUN ldd /opt/oai-physim/targets/bin/nr_pbchsim.Rel15
#RUN ldd /opt/oai-physim/targets/bin/nr_pucchsim.Rel15
#RUN ldd /opt/oai-physim/targets/bin/nr_ulsim.Rel15
#RUN ldd /opt/oai-physim/targets/bin/smallblocktest.Rel15
# Copy some executables
WORKDIR /usr/bin/
COPY --from=phy-sim-build /usr/bin/killall .
COPY --from=phy-sim-build /usr/bin/xmlstarlet .
COPY --from=phy-sim-build /usr/bin/svn .
# Copy the relevant configuration files for phySim
WORKDIR /opt/oai-physim/
COPY --from=phy-sim-build /oai-ran/cmake_targets/autotests/run_exec_autotests.bash /opt/oai-physim/cmake_targets/autotests/
COPY --from=phy-sim-build /oai-ran/cmake_targets/autotests/test_case_list.xml /opt/oai-physim/cmake_targets/autotests/
COPY --from=phy-sim-build /oai-ran/cmake_targets/autotests/tools/free_mem.bash /opt/oai-physim/cmake_targets/autotests/tools/
COPY --from=phy-sim-build /oai-ran/cmake_targets/tools/build_helper /opt/oai-physim/cmake_targets/tools/
COPY --from=phy-sim-build /oai-ran/cmake_targets/tools/test_helper /opt/oai-physim/cmake_targets/tools/
#CMD ["sleep", "infinity"]
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment