Commit 2a45e319 authored by Raphael Defosseux's avatar Raphael Defosseux
Browse files

CI: adding FDD mode to 5G RF sim test


Signed-off-by: Raphael Defosseux's avatarRaphael Defosseux <raphael.defosseux@eurecom.fr>
parent 682f868c
......@@ -749,7 +749,7 @@ function report_test {
echo " </tr>" >> ./test_simulator_results.html
EPC_CONFIGS=("noS1")
TRANS_MODES=("tdd")
TRANS_MODES=("fdd" "tdd")
BW_CASES=(106)
for CN_CONFIG in ${EPC_CONFIGS[@]}
do
......
......@@ -379,7 +379,7 @@ function check_iperf {
local LOC_IS_DL=`echo $LOC_BASE_LOG | grep -c _dl`
local LOC_IS_BASIC_SIM=`echo $LOC_BASE_LOG | grep -c basic_sim`
local LOC_IS_RF_SIM=`echo $LOC_BASE_LOG | grep -c rf_sim`
local LOC_IS_NR=`echo $LOC_BASE_LOG | grep -c tdd_106prb`
local LOC_IS_NR=`echo $LOC_BASE_LOG | grep -c _106prb`
if [ -f ${LOC_BASE_LOG}_client.txt ]
then
local FILE_COMPLETE=`egrep -c "Server Report" ${LOC_BASE_LOG}_client.txt`
......@@ -2189,39 +2189,49 @@ function run_test_on_vm {
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]
then
CN_CONFIG="noS1"
CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf
S1_NOS1_CFG=0
PRB=106
FREQUENCY=3510
if [ ! -d $ARCHIVES_LOC ]
then
mkdir --parents $ARCHIVES_LOC
fi
local try_cnt=0
NR_STATUS=0
CN_CONFIG="noS1"
S1_NOS1_CFG=0
######### start of RA TEST loop
while [ $try_cnt -lt 5 ] #5 because it hardly succeed within CI
# for the moment only TDD
TRANS_MODES=("tdd")
for TMODE in ${TRANS_MODES[@]}
do
if [[ $TMODE =~ .*fdd.* ]]
then
CONF_FILE=gnb.band66.tm1.106PRB.usrpn300.conf
PRB=106
FREQUENCY=37000
else
CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf
PRB=106
FREQUENCY=3510
fi
local try_cnt=0
NR_STATUS=0
while [ $try_cnt -lt 1 ]
do
SYNC_STATUS=0
RA_STATUS=0
rm -f $ARCHIVES_LOC/tdd_${PRB}prb_${CN_CONFIG}*ra_test.log
rm -f $ARCHIVES_LOC/${TMODE}_${PRB}prb_${CN_CONFIG}*ra_test.log
echo "############################################################"
echo "${CN_CONFIG} : Starting the gNB"
echo "${CN_CONFIG} : Starting the gNB in ${TMODE} mode (RA TEST)"
echo "############################################################"
CURRENT_GNB_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_gnb_ra_test.log
CURRENT_GNB_LOG_FILE=${TMODE}_${PRB}prb_${CN_CONFIG}_gnb_ra_test.log
#last argument = 1 is to enable --do-ra for RA test
start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG 1
echo "############################################################"
echo "${CN_CONFIG} : Starting the NR-UE"
echo "${CN_CONFIG} : Starting the NR-UE in ${TMODE} mode (RA TEST)"
echo "############################################################"
CURRENT_NR_UE_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ue_ra_test.log
CURRENT_NR_UE_LOG_FILE=${TMODE}_${PRB}prb_${CN_CONFIG}_ue_ra_test.log
#last argument = 1 is to enable --do-ra for RA test
start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG 1
if [ $NR_UE_SYNC -eq 0 ]
......@@ -2260,35 +2270,47 @@ function run_test_on_vm {
else
try_cnt=$((try_cnt+10))
fi
done
done
########### end RA test
sleep 30
######### start of PHY TEST loop
try_cnt=0
while [ $try_cnt -lt 4 ]
SYNC_STATUS=0
PING_STATUS=0
IPERF_STATUS=0
TRANS_MODES=("fdd tdd")
for TMODE in ${TRANS_MODES[@]}
do
if [[ $TMODE =~ .*fdd.* ]]
then
CONF_FILE=gnb.band66.tm1.106PRB.usrpn300.conf
PRB=106
FREQUENCY=37000
else
CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf
PRB=106
FREQUENCY=3510
fi
SYNC_STATUS=0
PING_STATUS=0
IPERF_STATUS=0
rm -f $ARCHIVES_LOC/tdd_${PRB}prb_${CN_CONFIG}_gnb.log $ARCHIVES_LOC/tdd_${PRB}prb_${CN_CONFIG}_ue.log
rm -f $ARCHIVES_LOC/tdd_${PRB}prb_${CN_CONFIG}_ping_gnb_from_nrue.log $ARCHIVES_LOC/tdd_${PRB}prb_${CN_CONFIG}_ping_from_gnb_nrue.log
rm -f $ARCHIVES_LOC/tdd_${PRB}prb_${CN_CONFIG}_iperf_dl*txt $ARCHIVES_LOC/tdd_${PRB}prb_${CN_CONFIG}_iperf_ul*txt
try_cnt=0
while [ $try_cnt -lt 1 ]
do
rm -f $ARCHIVES_LOC/${TMODE}_${PRB}prb_${CN_CONFIG}_gnb.log $ARCHIVES_LOC/${TMODE}_${PRB}prb_${CN_CONFIG}_ue.log
rm -f $ARCHIVES_LOC/${TMODE}_${PRB}prb_${CN_CONFIG}_ping_gnb_from_nrue.log $ARCHIVES_LOC/${TMODE}_${PRB}prb_${CN_CONFIG}_ping_from_gnb_nrue.log
rm -f $ARCHIVES_LOC/${TMODE}_${PRB}prb_${CN_CONFIG}_iperf_dl*txt $ARCHIVES_LOC/${TMODE}_${PRB}prb_${CN_CONFIG}_iperf_ul*txt
echo "############################################################"
echo "${CN_CONFIG} : Starting the gNB"
echo "${CN_CONFIG} : Starting the gNB in ${TMODE} mode (PHY TEST)"
echo "############################################################"
CURRENT_GNB_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_gnb.log
CURRENT_GNB_LOG_FILE=${TMODE}_${PRB}prb_${CN_CONFIG}_gnb.log
start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG 0
echo "############################################################"
echo "${CN_CONFIG} : Starting the NR-UE"
echo "${CN_CONFIG} : Starting the NR-UE in ${TMODE} mode (PHY TEST)"
echo "############################################################"
CURRENT_NR_UE_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ue.log
CURRENT_NR_UE_LOG_FILE=${TMODE}_${PRB}prb_${CN_CONFIG}_ue.log
start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG 0
if [ $NR_UE_SYNC -eq 0 ]
then
......@@ -2306,7 +2328,7 @@ function run_test_on_vm {
echo "${CN_CONFIG} : Pinging the gNB from NR-UE"
echo "############################################################"
get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR
PING_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ping_gnb_from_nrue.log
PING_LOG_FILE=${TMODE}_${PRB}prb_${CN_CONFIG}_ping_gnb_from_nrue.log
ping_epc_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
......@@ -2315,7 +2337,7 @@ function run_test_on_vm {
echo "${CN_CONFIG} : Pinging the NR-UE from gNB"
echo "############################################################"
get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1
PING_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ping_from_gnb_nrue.log
PING_LOG_FILE=${TMODE}_${PRB}prb_${CN_CONFIG}_ping_from_gnb_nrue.log
ping_enb_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
......@@ -2324,7 +2346,7 @@ function run_test_on_vm {
echo "${CN_CONFIG} : iperf DL -- NR-UE is server and gNB is client"
echo "############################################################"
THROUGHPUT="30K"
CURR_IPERF_LOG_BASE=tdd_${PRB}prb_${CN_CONFIG}_iperf_dl
CURR_IPERF_LOG_BASE=${TMODE}_${PRB}prb_${CN_CONFIG}_iperf_dl
get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR
get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1
generic_iperf $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $UE_IP_ADDR $GNB_VM_CMDS $GNB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 1 0
......@@ -2346,7 +2368,7 @@ function run_test_on_vm {
echo "${CN_CONFIG} : iperf UL -- gNB is server and NR-UE is client"
echo "############################################################"
THROUGHPUT="30K"
CURR_IPERF_LOG_BASE=tdd_${PRB}prb_${CN_CONFIG}_iperf_ul
CURR_IPERF_LOG_BASE=${TMODE}_${PRB}prb_${CN_CONFIG}_iperf_ul
get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR
get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1
generic_iperf $GNB_VM_CMDS $GNB_VM_IP_ADDR $ENB_IP_ADDR $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 1 0
......@@ -2368,6 +2390,7 @@ function run_test_on_vm {
else
try_cnt=$((try_cnt+10))
fi
done
done
######### end of loop
full_l2_sim_destroy
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment