Commit 334e3a57 authored by Dr.-Ing.  Javier Morgade's avatar Dr.-Ing. Javier Morgade
Browse files

1. Reference config file defined with basic MBMS configuration stuff

	2. Dedicated MBMS tasks manager:
	   -If MBMS gets enabled through softmodem config file it will launch SCTP task (to check with S1 interface)
	3. "On the flight" dynamic RU configuration update mechanism implemented

	ACKNOWLEDGEMENT:
 	1. This commit was developed at Vicomtech (https://www.vicomtech.org) under UE project CDN-X-ALL: "CDN edge-cloud computing for efficient cache and reliable streaming aCROSS Aggregated unicast-multicast LinkS"
 	2. Project funded by Fed4FIRE+ OC5 (https://www.fed4fire.eu

)
Signed-off-by: Dr.-Ing.  Javier Morgade's avatarJavier Morgade <javier.morgade@ieee.org>
parent 2bd1e119
Active_eNBs = ( "eNB-Eurecom-LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
# real_time choice in {hard, rt-preempt, no}
real_time = "no";
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB-Eurecom-LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ( { mcc = 208; mnc = 93; mnc_length = 2; } );
tr_s_preference = "local_mac"
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2685000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 50;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 2;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
pbch_repetition = "FALSE";
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 0;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower = -27;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -104;
pusch_alpha = "AL1";
pucch_p0_Nominal = -108;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
mbms_dedicated_serving_cell = "DISABLE"
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "127.0.0.3";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
enable_measurement_reports = "no";
///X2
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
////////// MCE parameters:
target_mce_m2_ip_address = ( { ipv4 = "127.0.0.7";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
///M2
enable_enb_m2 = "yes";
mbms_configuration_data_list = (
{
mbsfn_sync_area = 0x0001;
mbms_service_area_list=(
{
mbms_service_area=0x0001;
}
);
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2/24";
ENB_INTERFACE_NAME_FOR_S1U = "lo";
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.5/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "127.0.0.2/24";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
ENB_IPV4_ADDRESS_FOR_M2C = "127.0.0.2/24";
ENB_PORT_FOR_M2C = 36443; # Spec 36443
};
}
);
MCEs = (
{
MCE_ID = 0xe00;
MCE_name = "MCE-Vicomtech-LTEBox";
//M2
enable_mce_m2 = "yes";
//M3
enable_mce_m3 = "yes";
target_mme_m3_ip_address = ( { ipv4 = "127.0.0.18";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
#ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
#ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2/24";
#ENB_INTERFACE_NAME_FOR_S1U = "lo";
#ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.5/24";
#ENB_IPV4_ADDRESS_FOR_S1U = "224.10.10.10/24";
#ENB_PORT_FOR_S1U = 2152; # Spec 2152
#ENB_IPV4_ADDRESS_FOR_X2C = "127.0.0.2/24";
#ENB_PORT_FOR_X2C = 36422; # Spec 36422
#ENB_IPV4_ADDRESS_FOR_M2C = "127.0.0.2/24";
#ENB_PORT_FOR_M2C = 36443; # Spec 36443
MCE_INTERFACE_NAME_FOR_M2_ENB = "lo";
MCE_IPV4_ADDRESS_FOR_M2C = "127.0.0.7/24";
MCE_PORT_FOR_M2C = 36443; # Spec 36443
MCE_INTERFACE_NAME_FOR_M3_MME = "lo";
MCE_IPV4_ADDRESS_FOR_M3C = "127.0.0.3/24";
MCE_PORT_FOR_M3C = 36444; # Spec 36444
#MME_IPV4_ADDRESS_FOR_M3C = "127.0.0.8/24";
#MME_PORT_FOR_M3C = 36444; # Spec 36444
};
plnm:
{
mcc = 208;
mnc = 93;
mnc_length = 2;
};
mbms_sched_info :
{
mcch_update_time = 10;
mbms_area_config_list = (
{
common_sf_allocation_period = 2; #rf4(0) rf8(1) rf16(2) rf32(3) rf64(4) rf128(5) rf256(6)
mbms_area_id = 0;
pmch_config_list = (
{
allocated_sf_end=32;
data_mcs=14;
mch_scheduling_period = 0; #rf8(0)
mbms_session_list = (
{
#plnm + service_id ->tmgi
plnm:
{
mcc = 208;
mnc = 93;
mnc_length = 2;
}
service_id=0; #keep this allways as 0 (workaround for TUN if)
lcid=6; #this must be properly defined lcid:8+service:0 -> rab_id:8
}
);
}
);
mbms_sf_config_list = (
{
radioframe_allocation_period=1; #n1(0) n2(1) n4(2) n8(3) n16(4) n32(5)
radioframe_alloocation_offset=0;
num_frame="oneFrame";
subframe_allocation=57; #xx100000
//num_frame="fourFrame";
//subframe_allocation=14548987; #
}
);
}
);
};
mcch_config_per_mbsfn_area = (
{
mbsfn_area = 0;
pdcch_length = 1; #s1(0), s2(1)
repetition_period = 0; #rf32(0), rf64(1), rf128(2), rf256(3)
offset = 0;
modification_period = 0; #rf512(0; rf1024(1)
subframe_allocation_info = 32; #BITSTRING (6bits -> one frame) xx100101
mcs = 1; #n2(0), n7(1), n13(2), n19(3)
}
// ,
// {
// mbsfn_area = 0;
// pdcch_length = 0; #s1(0), s2(1)
// repetition_period = 2; #rf32(0), rf64(1), rf128(2), rf256(3)
// offset = 0;
// modification_period = 1; #rf512(0; rf1024(1)
// subframe_allocation_info = 32; #BITSTRING (6bits -> one frame) xx100000
// mcs = 0; #n2(0), n7(1), n13(2), n19(3)
// }
);
#); #end mbms_scheduling_info
}
);
MMEs = (
{
MME_ID = 0xe00;
MME_name = "MME-MBMS-Vicomtech-LTEBox";
//M3
enable_mme_m3 = "yes";
NETWORK_INTERFACES :
{
#ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
#ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2/24";
#ENB_INTERFACE_NAME_FOR_S1U = "lo";
#ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.5/24";
#ENB_IPV4_ADDRESS_FOR_S1U = "224.10.10.10/24";
#ENB_PORT_FOR_S1U = 2152; # Spec 2152
#ENB_IPV4_ADDRESS_FOR_X2C = "127.0.0.2/24";
#ENB_PORT_FOR_X2C = 36422; # Spec 36422
#ENB_IPV4_ADDRESS_FOR_M2C = "127.0.0.2/24";
#ENB_PORT_FOR_M2C = 36443; # Spec 36443
#MCE_INTERFACE_NAME_FOR_M2_ENB = "lo";
#MCE_IPV4_ADDRESS_FOR_M2C = "127.0.0.7/24";
#MCE_PORT_FOR_M2C = 36443; # Spec 36443
MME_INTERFACE_NAME_FOR_M3_MCE = "lo";
#MCE_IPV4_ADDRESS_FOR_M3C = "127.0.0.3/24";
#MCE_PORT_FOR_M3C = 36444; # Spec 36444
MME_IPV4_ADDRESS_FOR_M3C = "127.0.0.18/24";
MME_PORT_FOR_M3C = 36444; # Spec 36444
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_if_name = "lo";
remote_address = "127.0.0.2";
local_address = "127.0.0.1";
local_portc = 50000;
remote_portc = 50000;
local_portd = 50001;
remote_portd = 50001;
local_rf = "no"
tr_preference = "udp_if4p5"
nb_tx = 2
nb_rx = 2
att_tx = 0
att_rx = 0;
eNB_instances = [0];
is_slave = "no";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config = {
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
......@@ -405,6 +405,145 @@ add_library(S1AP_ENB
)
add_dependencies(S1AP_ENB rrc_flag s1ap_flag)
#M2AP
# Same limitation as described in RRC/S1AP: unknown generated file list
# so we generate it at cmake time
##############
add_list1_option(M2AP_RELEASE R14 "M2AP ASN.1 grammar version" R14)
set(M2AP_DIR ${OPENAIR2_DIR}/M2AP)
if (${M2AP_RELEASE} STREQUAL "R8")
make_version(M2AP_VERSION 8 9 0)
set(M2AP_ASN_FILES m2ap-8.9.0.asn1)
elseif (${M2AP_RELEASE} STREQUAL "R11")
make_version(M2AP_VERSION 11 9 0)
set(M2AP_ASN_FILES m2ap-11.9.0.asn1)
elseif (${M2AP_RELEASE} STREQUAL "R12")
make_version(M2AP_VERSION 12 9 0)
set(M2AP_ASN_FILES m2ap-12.9.0.asn1)
elseif (${M2AP_RELEASE} STREQUAL "R14")
make_version(M2AP_VERSION 14 0 0)
set(M2AP_ASN_FILES m2ap-14.0.0.asn1)
elseif (${M2AP_RELEASE} STREQUAL "R15")
make_version(M2AP_VERSION 15 1 0)
set(M2AP_ASN_FILES m2ap-15.1.0.asn1)
endif(${M2AP_RELEASE} STREQUAL "R8")
add_definitions(-DM2AP_VERSION=${M2AP_VERSION})
set(M2AP_ASN_DIR ${M2AP_DIR}/MESSAGES/ASN1/${M2AP_RELEASE})
set(M2AP_C_DIR ${asn1_generated_dir}/M2AP_${M2AP_RELEASE})
# Warning: if you modify ASN.1 source file to generate new C files, cmake should be re-run instead of make
execute_process(COMMAND ${OPENAIR_CMAKE}/tools/make_asn1c_includes.sh "${M2AP_C_DIR}" "${M2AP_ASN_DIR}/${M2AP_ASN_FILES}" "M2AP_" -fno-include-deps -DEMIT_ASN_DEBUG=1
RESULT_VARIABLE ret)
if (NOT ${ret} STREQUAL 0)
message(FATAL_ERROR "${ret}: error")
endif (NOT ${ret} STREQUAL 0)
file(GLOB M2AP_source ${M2AP_C_DIR}/*.c)
add_custom_target (
m2_flag ALL
COMMAND ${OPENAIR_CMAKE}/tools/make_asn1c_includes.sh "${M2AP_C_DIR}" "${M2AP_ASN_DIR}/${M2AP_ASN_FILES}" "M2AP_" -fno-include-deps
DEPENDS ${M2AP_ASN_DIR}/${M2AP_ASN_FILES}
)
add_library(M2AP_LIB
${M2AP_source}
${M2AP_DIR}/m2ap_common.c
)
add_dependencies(M2AP_LIB rrc_flag m2_flag)
include_directories ("${M2AP_C_DIR}")
include_directories ("${M2AP_DIR}")
add_library(M2AP_ENB
${M2AP_DIR}/m2ap_eNB.c
${M2AP_DIR}/m2ap_MCE.c
${M2AP_DIR}/m2ap_decoder.c
${M2AP_DIR}/m2ap_encoder.c
${M2AP_DIR}/m2ap_MCE_handler.c
${M2AP_DIR}/m2ap_eNB_handler.c
${M2AP_DIR}/m2ap_itti_messaging.c
${M2AP_DIR}/m2ap_eNB_management_procedures.c
${M2AP_DIR}/m2ap_eNB_generate_messages.c
${M2AP_DIR}/m2ap_MCE_management_procedures.c
${M2AP_DIR}/m2ap_MCE_generate_messages.c
${M2AP_DIR}/m2ap_ids.c
${M2AP_DIR}/m2ap_timers.c
${M2AP_DIR}/m2ap_MCE_interface_management.c
${M2AP_DIR}/m2ap_eNB_interface_management.c
)
add_dependencies(M2AP_ENB rrc_flag m2_flag)
#M3AP
# Same limitation as described in RRC/S1AP: unknown generated file list
# so we generate it at cmake time
##############
add_list1_option(M3AP_RELEASE R14 "M3AP ASN.1 grammar version" R14)
set(M3AP_DIR ${OPENAIR3_DIR}/M3AP)
if (${M3AP_RELEASE} STREQUAL "R8")
make_version(M3AP_VERSION 8 9 0)
set(M3AP_ASN_FILES m3ap-8.9.0.asn1)
elseif (${M3AP_RELEASE} STREQUAL "R11")
make_version(M3AP_VERSION 11 9 0)
set(M3AP_ASN_FILES m3ap-11.9.0.asn1)
elseif (${M3AP_RELEASE} STREQUAL "R12")
make_version(M3AP_VERSION 12 9 0)
set(M3AP_ASN_FILES m3ap-12.9.0.asn1)
elseif (${M3AP_RELEASE} STREQUAL "R14")
make_version(M3AP_VERSION 14 0 0)
set(M3AP_ASN_FILES m3ap-14.0.0.asn1)
elseif (${M3AP_RELEASE} STREQUAL "R15")
make_version(M3AP_VERSION 15 1 0)
set(M3AP_ASN_FILES m3ap-15.1.0.asn1)
endif(${M3AP_RELEASE} STREQUAL "R8")
add_definitions(-DM3AP_VERSION=${M3AP_VERSION})
set(M3AP_ASN_DIR ${M3AP_DIR}/MESSAGES/ASN1/${M3AP_RELEASE})
set(M3AP_C_DIR ${asn1_generated_dir}/M3AP_${M3AP_RELEASE})
# Warning: if you modify ASN.1 source file to generate new C files, cmake should be re-run instead of make
execute_process(COMMAND ${OPENAIR_CMAKE}/tools/make_asn1c_includes.sh "${M3AP_C_DIR}" "${M3AP_ASN_DIR}/${M3AP_ASN_FILES}" "M3AP_" -fno-include-deps
RESULT_VARIABLE ret)
if (NOT ${ret} STREQUAL 0)
message(FATAL_ERROR "${ret}: error")
endif (NOT ${ret} STREQUAL 0)
file(GLOB M3AP_source ${M3AP_C_DIR}/*.c)
add_custom_target (
m3_flag ALL
COMMAND ${OPENAIR_CMAKE}/tools/make_asn1c_includes.sh "${M3AP_C_DIR}" "${M3AP_ASN_DIR}/${M3AP_ASN_FILES}" "M3AP_" -fno-include-deps
DEPENDS ${M3AP_ASN_DIR}/${M3AP_ASN_FILES}
)
add_library(M3AP_LIB
${M3AP_source}
${M3AP_DIR}/m3ap_common.c
)
add_dependencies(M3AP_LIB rrc_flag m3_flag)
include_directories ("${M3AP_C_DIR}")
include_directories ("${M3AP_DIR}")
add_library(M3AP_ENB
${M3AP_DIR}/m3ap_decoder.c
${M3AP_DIR}/m3ap_encoder.c
${M3AP_DIR}/m3ap_MCE_handler.c
${M3AP_DIR}/m3ap_MME_handler.c
${M3AP_DIR}/m3ap_MME.c
${M3AP_DIR}/m3ap_MME_management_procedures.c
${M3AP_DIR}/m3ap_MME_interface_management.c
${M3AP_DIR}/m3ap_MCE.c
${M3AP_DIR}/m3ap_MCE_management_procedures.c
${M3AP_DIR}/m3ap_MCE_interface_management.c
${M3AP_DIR}/m3ap_itti_messaging.c
${M3AP_DIR}/m3ap_ids.c
${M3AP_DIR}/m3ap_timers.c
)
add_dependencies(M3AP_ENB rrc_flag m3_flag)
#X2AP
# Same limitation as described in RRC/S1AP: unknown generated file list
# so we generate it at cmake time
......@@ -763,6 +902,7 @@ include_directories("${OPENAIR1_DIR}")
include_directories("${OPENAIR2_DIR}")
include_directories("${OPENAIR3_DIR}/NAS/TOOLS")
include_directories("${OPENAIR2_DIR}/ENB_APP")
include_directories("${OPENAIR2_DIR}/MCE_APP")
include_directories("${OPENAIR2_DIR}/LAYER2/RLC")
include_directories("${OPENAIR2_DIR}/LAYER2/RLC/AM_v9.3.0")
include_directories("${OPENAIR2_DIR}/LAYER2/RLC/UM_v9.3.0")
......@@ -785,9 +925,12 @@ include_directories("${OPENAIR3_DIR}/SECU")
include_directories("${OPENAIR3_DIR}/SCTP")
include_directories("${OPENAIR3_DIR}/S1AP")
include_directories("${OPENAIR2_DIR}/X2AP")
include_directories("${OPENAIR2_DIR}/M2AP")
include_directories("${OPENAIR2_DIR}/F1AP")
include_directories("${OPENAIR3_DIR}/UDP")
include_directories("${OPENAIR3_DIR}/GTPV1-U")
include_directories("${OPENAIR3_DIR}/M3AP")
include_directories("${OPENAIR3_DIR}/MME_APP")
include_directories("${OPENAIR_DIR}/targets/COMMON")
include_directories("${OPENAIR_DIR}/targets/ARCH/COMMON")
include_directories("${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/PHY")
......@@ -1371,6 +1514,7 @@ set(L2_SRC
# ${RRC_DIR}/rrc_UE.c
${RRC_DIR}/rrc_eNB.c
${RRC_DIR}/rrc_eNB_S1AP.c
${RRC_DIR}/rrc_eNB_M2AP.c
${RRC_DIR}/rrc_eNB_UE_context.c
${RRC_DIR}/rrc_common.c
${RRC_DIR}/L2_interface.c
......@@ -1461,12 +1605,20 @@ set (ENB_APP_SRC
${OPENAIR2_DIR}/ENB_APP/RRC_config_tools.c
)
set (MCE_APP_SRC
${OPENAIR2_DIR}/MCE_APP/mce_app.c
${OPENAIR2_DIR}/MCE_APP/mce_config.c
)
add_library(L2
${L2_SRC}
${MAC_SRC}
${ENB_APP_SRC})
${ENB_APP_SRC}
${MCE_APP_SRC})
# ${OPENAIR2_DIR}/RRC/L2_INTERFACE/openair_rrc_L2_interface.c)
add_dependencies(L2 rrc_flag s1ap_flag x2_flag)
add_dependencies(L2 rrc_flag s1ap_flag x2_flag m2_flag m3_flag)
add_library(L2_UE