proto.h 40.7 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
/*
 * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The OpenAirInterface Software Alliance licenses this file to You under
 * the OAI Public License, Version 1.0  (the "License"); you may not use this file
 * except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.openairinterface.org/?page_id=698
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *-------------------------------------------------------------------------------
 * For more information about the OpenAirInterface (OAI) Software Alliance:
 *      contact@openairinterface.org
 */

22
/*! \file LAYER2/MAC/proto.h
nikaeinn's avatar
nikaeinn committed
23
 * \brief MAC functions prototypes for eNB and UE
24
 * \author Navid Nikaein and Raymond Knopp
25
 * \date 2010 - 2014
26
 * \email navid.nikaein@eurecom.fr
nikaeinn's avatar
nikaeinn committed
27
 * \version 1.0
28 29 30
 */
#ifndef __LAYER2_MAC_PROTO_H__
#define __LAYER2_MAC_PROTO_H__
31

32 33 34
/** \addtogroup _mac
 *  @{
 */
35 36


37
/** \fn void schedule_RA(module_id_t module_idP,frame_t frameP,sub_frame_t subframe,uint8_t Msg3_subframe,unsigned int *nprb);
38
\brief First stage of Random-Access Scheduling. Loops over the RA_templates and checks if RAR, Msg3 or its retransmission are to be scheduled in the subframe.  It returns the total number of PRB used for RA SDUs.  For Msg3 it retrieves the L3msg from RRC and fills the appropriate buffers.  For the others it just computes the number of PRBs. Each DCI uses 3 PRBs (format 1A)
39 40 41 42
for the message.
@param Mod_id Instance ID of eNB
@param frame Frame index
@param subframe Subframe number on which to act
knopp's avatar
knopp committed
43

44
*/
45
void schedule_RA(module_id_t module_idP,frame_t frameP,sub_frame_t subframe,uint8_t Msg3_subframe);
46 47 48 49 50 51 52

/** \brief First stage of SI Scheduling. Gets a SI SDU from RRC if available and computes the MCS required to transport it as a function of the SDU length.  It assumes a length less than or equal to 64 bytes (MCS 6, 3 PRBs).
@param Mod_id Instance ID of eNB
@param frame Frame index
@param subframe Subframe number on which to act
@param Msg3_subframe Subframe where Msg3 will be transmitted
*/
53
void schedule_SI(module_id_t module_idP,frame_t frameP,sub_frame_t subframeP);
54 55 56 57 58 59

/** \brief MBMS scheduling: Checking the position for MBSFN subframes. Create MSI, transfer MCCH from RRC to MAC, transfer MTCHs from RLC to MAC. Multiplexing MSI,MCCH&MTCHs. Return 1 if there are MBSFN data being allocated, otherwise return 0;
@param Mod_id Instance ID of eNB
@param frame Frame index
@param subframe Subframe number on which to act
*/
60
int schedule_MBMS(module_id_t module_idP,uint8_t CC_id, frame_t frameP, sub_frame_t subframe);
61 62 63 64

/** \brief check the mapping between sf allocation and sync area, Currently only supports 1:1 mapping
@param Mod_id Instance ID of eNB
@param mbsfn_sync_area index of mbsfn sync area
65
@param[out] index of sf pattern
66
*/
67
int8_t get_mbsfn_sf_alloction (module_id_t module_idP, uint8_t CC_id, uint8_t mbsfn_sync_area);
68 69 70 71 72

/** \brief check the mapping between sf allocation and sync area, Currently only supports 1:1 mapping
@param Mod_id Instance ID of eNB
@param mbsfn_sync_area index of mbsfn sync area
@param eNB_index index of eNB
73
@param[out] index of sf pattern
74 75 76 77 78 79 80 81 82
*/
int8_t ue_get_mbsfn_sf_alloction (module_id_t module_idP, uint8_t mbsfn_sync_area, unsigned char eNB_index);

/** \brief top ULSCH Scheduling for TDD (config 1-6).
@param Mod_id Instance ID of eNB
@param frame Frame index
@param subframe Subframe number on which to act
@param sched_subframe Subframe number where PUSCH is transmitted (for DAI lookup)
*/
83
void schedule_ulsch(module_id_t module_idP,frame_t frameP,unsigned char cooperation_flag,sub_frame_t subframe,unsigned char sched_subframe);
84

85
/** \brief ULSCH Scheduling per RNTI
86 87 88 89 90
@param Mod_id Instance ID of eNB
@param frame Frame index
@param subframe Subframe number on which to act
@param sched_subframe Subframe number where PUSCH is transmitted (for DAI lookup)
*/
91
void schedule_ulsch_rnti(module_id_t module_idP, unsigned char cooperation_flag, frame_t frameP, sub_frame_t subframe, unsigned char sched_subframe, uint16_t *first_rb);
92

93
/** \brief ULSCH Scheduling for CBA  RNTI
94 95 96 97 98
@param Mod_id Instance ID of eNB
@param frame Frame index
@param subframe Subframe number on which to act
@param sched_subframe Subframe number where PUSCH is transmitted (for DAI lookup)
*/
99
void schedule_ulsch_cba_rnti(module_id_t module_idP, unsigned char cooperation_flag, frame_t frameP, sub_frame_t subframe, unsigned char sched_subframe, uint16_t *first_rb);
100

101
/** \brief Second stage of DLSCH scheduling, after schedule_SI, schedule_RA and schedule_dlsch have been called.  This routine first allocates random frequency assignments for SI and RA SDUs using distributed VRB allocations and adds the corresponding DCI SDU to the DCI buffer for PHY.  It then loops over the UE specific DCIs previously allocated and fills in the remaining DCI fields related to frequency allocation.  It assumes localized allocation of type 0 (DCI.rah=0).  The allocation is done for tranmission modes 1,2,4.
102 103 104 105 106
@param Mod_id Instance of eNB
@param frame Frame index
@param subframe Index of subframe
@param mbsfn_flag Indicates that this subframe is for MCH/MCCH
*/
107
void fill_DLSCH_dci(module_id_t module_idP,frame_t frameP,sub_frame_t subframe,int *mbsfn_flag);
108

109
/** \brief UE specific DLSCH scheduling. Retrieves next ue to be schduled from round-robin scheduler and gets the appropriate harq_pid for the subframe from PHY. If the process is active and requires a retransmission, it schedules the retransmission with the same PRB count and MCS as the first transmission. Otherwise it consults RLC for DCCH/DTCH SDUs (status with maximum number of available PRBS), builds the MAC header (timing advance sent by default) and copies
110 111 112
@param Mod_id Instance ID of eNB
@param frame Frame index
@param subframe Subframe on which to act
knopp's avatar
knopp committed
113

114 115
@param mbsfn_flag  Indicates that MCH/MCCH is in this subframe
*/
116
void schedule_ue_spec(module_id_t module_idP,frame_t frameP,sub_frame_t subframe,int *mbsfn_flag);
117

118

119 120 121 122
/** \brief Function for UE/PHY to compute PUSCH transmit power in power-control procedure.
    @param Mod_id Module id of UE
    @returns Po_NOMINAL_PUSCH (PREAMBLE_RECEIVED_TARGET_POWER+DELTA_PREAMBLE
*/
123
int8_t get_Po_NOMINAL_PUSCH(module_id_t module_idP,uint8_t CC_id);
124

125
/** \brief Function to compute DELTA_PREAMBLE from 36.321 (for RA power ramping procedure and Msg3 PUSCH power control policy)
126 127 128
    @param Mod_id Module id of UE
    @returns DELTA_PREAMBLE
*/
knopp's avatar
 
knopp committed
129
int8_t get_DELTA_PREAMBLE(module_id_t module_idP,int CC_id);
130

131
/** \brief Function for compute deltaP_rampup from 36.321 (for RA power ramping procedure and Msg3 PUSCH power control policy)
132
    @param Mod_id Module id of UE
133
    @param CC_id carrier component id of UE
134 135
    @returns deltaP_rampup
*/
136
int8_t get_deltaP_rampup(module_id_t module_idP,uint8_t CC_id);
137

138
uint16_t mac_computeRIV(uint16_t N_RB_DL,uint16_t RBstart,uint16_t Lcrbs);
139

140
//main.c
141

knopp's avatar
 
knopp committed
142
int mac_top_init(int eMBMS_active, char *uecap_xer,uint8_t cba_group_active, uint8_t HO_active);
143 144 145 146 147 148 149 150 151 152 153 154 155

char layer2_init_UE(module_id_t module_idP);

char layer2_init_eNB(module_id_t module_idP, uint8_t Free_ch_index);

void mac_switch_node_function(module_id_t module_idP);

int mac_init_global_param(void);

void mac_top_cleanup(void);

void mac_UE_out_of_sync_ind(module_id_t module_idP,frame_t frameP, uint16_t eNB_index);

156
void dlsch_scheduler_pre_processor_reset (int module_idP,int UE_id,
157
    uint8_t  CC_id,
158 159
    int frameP,
    int subframeP,
160 161 162 163 164
    int N_RBG,
    uint16_t nb_rbs_required[MAX_NUM_CCs][NUMBER_OF_UE_MAX],
    uint16_t  nb_rbs_required_remaining[MAX_NUM_CCs][NUMBER_OF_UE_MAX],
    unsigned char rballoc_sub[MAX_NUM_CCs][N_RBG_MAX],
    unsigned char MIMO_mode_indicator[MAX_NUM_CCs][N_RBG_MAX]);
165 166 167 168 169 170 171 172 173 174 175 176 177

// eNB functions
/* \brief This function assigns pre-available RBS to each UE in specified sub-bands before scheduling is done
@param Mod_id Instance ID of eNB
@param frame Index of frame
@param subframe Index of current subframe
@param N_RBS Number of resource block groups
 */


void dlsch_scheduler_pre_processor (module_id_t module_idP,
                                    frame_t frameP,
                                    sub_frame_t subframe,
178
                                    int N_RBG[MAX_NUM_CCs],
179
                                    int *mbsfn_flag);
180

181 182

void dlsch_scheduler_pre_processor_allocate (module_id_t   Mod_id,
183 184 185 186 187 188 189 190 191 192 193 194
    int           UE_id,
    uint8_t       CC_id,
    int           N_RBG,
    int           transmission_mode,
    int           min_rb_unit,
    uint8_t       N_RB_DL,
    uint16_t      nb_rbs_required[MAX_NUM_CCs][NUMBER_OF_UE_MAX],
    uint16_t      nb_rbs_required_remaining[MAX_NUM_CCs][NUMBER_OF_UE_MAX],
    unsigned char rballoc_sub[MAX_NUM_CCs][N_RBG_MAX],
    unsigned char MIMO_mode_indicator[MAX_NUM_CCs][N_RBG_MAX]);

/* \brief Function to trigger the eNB scheduling procedure.  It is called by PHY at the beginning of each subframe, \f$n$\f
195
   and generates all DLSCH allocations for subframe \f$n\f$ and ULSCH allocations for subframe \f$n+k$\f. 
196 197 198 199 200 201 202 203 204 205 206
@param Mod_id Instance ID of eNB
@param cooperation_flag Flag to indicated that this cell has cooperating nodes (i.e. that there are collaborative transport channels that
can be scheduled.
@param subframe Index of current subframe
@param calibration_flag Flag to indicate that eNB scheduler should schedule TDD auto-calibration PUSCH.
*/
void eNB_dlsch_ulsch_scheduler(module_id_t module_idP, uint8_t cooperation_flag, frame_t frameP, sub_frame_t subframeP);//, int calibration_flag);

/* \brief Function to indicate a received preamble on PRACH.  It initiates the RA procedure.
@param Mod_id Instance ID of eNB
@param preamble_index index of the received RA request
207
@param timing_offset Offset in samples of the received PRACH w.r.t. eNB timing. This is used to
208
*/
209
void initiate_ra_proc(module_id_t module_idP,int CC_id,frame_t frameP, sub_frame_t subframeP, uint16_t preamble_index,int16_t timing_offset,uint16_t rnti);
210 211 212 213 214 215 216

/* \brief Function in eNB to fill RAR pdu when requested by PHY.  This provides a single RAR SDU for the moment and returns the t-CRNTI.
@param Mod_id Instance ID of eNB
@param dlsch_buffer Pointer to DLSCH input buffer
@param N_RB_UL Number of UL resource blocks
@returns t_CRNTI
*/
217 218 219 220 221 222 223 224
unsigned short fill_rar(
  const module_id_t module_idP,
  const int         CC_id,
  const frame_t     frameP,
  uint8_t   * const dlsch_buffer,
  const uint16_t    N_RB_UL,
  const uint8_t input_buffer_length
);
225 226 227 228 229

/* \brief Function to indicate a failed RA response.  It removes all temporary variables related to the initial connection of a UE
@param Mod_id Instance ID of eNB
@param preamble_index index of the received RA request.
*/
knopp's avatar
 
knopp committed
230
void cancel_ra_proc(module_id_t module_idP,int CC_id,frame_t frameP, uint16_t preamble_index);
231

232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250
/* \brief Function used by PHY to inform MAC that an uplink is scheduled
          for Msg3 in given subframe. This is used so that the MAC
          scheduler marks as busy the RBs used by the Msg3.
@param Mod_id        Instance ID of eNB
@param CC_id         CC ID of eNB
@param frame         current frame
@param subframe      current subframe
@param rnti          UE rnti concerned
@param Msg3_frame    frame where scheduling takes place
@param Msg3_subframe subframe where scheduling takes place
*/
void set_msg3_subframe(module_id_t Mod_id,
                       int CC_id,
                       int frame,
                       int subframe,
                       int rnti,
                       int Msg3_frame,
                       int Msg3_subframe);

251 252
/* \brief Function to indicate a received SDU on ULSCH.
@param Mod_id Instance ID of eNB
253 254
@param CC_id Component carrier index
@param rnti RNTI of UE transmitting the SDU
255
@param sdu Pointer to received SDU
256 257 258
@param sdu_len Length of SDU
@param timing_advance timing advance adjustment after this pdu
@param ul_cqi Uplink CQI estimate after this pdu (SNR quantized to 8 bits, -64 ... 63.5 dB in .5dB steps)
259
*/
260 261 262 263 264 265 266 267 268 269
void rx_sdu(const module_id_t enb_mod_idP,
	    const int         CC_idP,
	    const frame_t     frameP,
	    const sub_frame_t subframeP,
	    const rnti_t      rntiP,
	    uint8_t          *sduP,
	    const uint16_t    sdu_lenP,
	    const uint16_t    timing_advance,
	    const uint8_t     ul_cqi);

270 271 272 273 274 275

/* \brief Function to indicate a scheduled schduling request (SR) was received by eNB.
@param Mod_id Instance ID of eNB
@param rnti RNTI of UE transmitting the SR
@param subframe Index of subframe where SR was received
*/
knopp's avatar
 
knopp committed
276
void SR_indication(module_id_t module_idP,int CC_id,frame_t frameP,rnti_t rnti, sub_frame_t subframe);
277

278 279 280 281 282 283 284 285 286
/* \brief Function to indicate a UL failure was detected by eNB PHY.
@param Mod_id Instance ID of eNB
@param CC_id Component carrier
@param frameP Frame index
@param rnti RNTI of UE transmitting the SR
@param subframe Index of subframe where SR was received
*/
void UL_failure_indication(module_id_t Mod_id,int CC_id,frame_t frameP,rnti_t rnti,sub_frame_t subframe);

knopp's avatar
 
knopp committed
287
uint8_t *get_dlsch_sdu(module_id_t module_idP,int CC_id,frame_t frameP,rnti_t rnti,uint8_t TBindex);
288 289 290 291 292

/* \brief Function to retrieve MCH transport block and MCS used for MCH in this MBSFN subframe.  Returns null if no MCH is to be transmitted
@param Mod_id Instance ID of eNB
@param frame Index of frame
@param subframe Index of current subframe
293
@param mcs Pointer to mcs used by PHY (to be filled by MAC)
294 295
@returns Pointer to MCH transport block and mcs for subframe
*/
296
MCH_PDU *get_mch_sdu( module_id_t Mod_id, int CC_id, frame_t frame, sub_frame_t subframe);
297 298 299 300 301 302 303 304 305 306 307


//added for ALU icic purpose
uint32_t  Get_Cell_SBMap(module_id_t module_idP);
void UpdateSBnumber(module_id_t module_idP);
//end ALU's algo


void        ue_mac_reset      (module_id_t module_idP,uint8_t eNB_index);
void        ue_init_mac       (module_id_t module_idP);
void        init_ue_sched_info(void);
knopp's avatar
 
knopp committed
308 309 310 311 312 313 314
void        add_ue_ulsch_info (module_id_t module_idP, int CC_id, int UE_id, sub_frame_t subframe,UE_ULSCH_STATUS status);
void        add_ue_dlsch_info (module_id_t module_idP, int CC_id,int UE_id, sub_frame_t subframe,UE_DLSCH_STATUS status);
int         find_UE_id        (module_id_t module_idP, rnti_t rnti) ;
rnti_t      UE_RNTI           (module_id_t module_idP, int UE_id);
int         UE_PCCID          (module_id_t module_idP, int UE_id);
uint8_t     find_active_UEs   (module_id_t module_idP);
boolean_t   is_UE_active      (module_id_t module_idP, int UE_id);
315
uint8_t     get_aggregation   (uint8_t bw_index, uint8_t cqi, uint8_t dci_fmt);
316 317 318

int8_t find_active_UEs_with_traffic(module_id_t module_idP);

319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339
void init_CCE_table(int module_idP,int CC_idP);

int get_nCCE_offset(int *CCE_table,
		    const unsigned char L, 
		    const int nCCE, 
		    const int common_dci, 
		    const unsigned short rnti, 
		    const unsigned char subframe);

int allocate_CCEs(int module_idP,
		  int CC_idP,
		  int subframe,
		  int test_only);

boolean_t CCE_allocation_infeasible(int module_idP,
				  int CC_idP,
				  int common_flag,
				  int subframe,
				  int aggregation,
				  int rnti);

340
void set_ue_dai(sub_frame_t   subframeP,
341 342
                int           UE_id,
                uint8_t       CC_id,
knopp's avatar
knopp committed
343
                uint8_t       tdd_config,
344
                UE_list_t     *UE_list);
345

346
uint8_t find_num_active_UEs_in_cbagroup(module_id_t module_idP, unsigned char group_id);
knopp's avatar
 
knopp committed
347
uint8_t UE_is_to_be_scheduled(module_id_t module_idP,int CC_id,uint8_t UE_id);
348 349 350 351 352
/** \brief Round-robin scheduler for ULSCH traffic.
@param Mod_id Instance ID for eNB
@param subframe Subframe number on which to act
@returns UE index that is to be scheduled if needed/room
*/
knopp's avatar
 
knopp committed
353
module_id_t schedule_next_ulue(module_id_t module_idP, int UE_id,sub_frame_t subframe);
354 355 356 357 358 359

/** \brief Round-robin scheduler for DLSCH traffic.
@param Mod_id Instance ID for eNB
@param subframe Subframe number on which to act
@returns UE index that is to be scheduled if needed/room
*/
360
int schedule_next_dlue(module_id_t module_idP, int CC_id, sub_frame_t subframe);
361 362 363 364

/* \brief Allocates a set of PRBS for a particular UE.  This is a simple function for the moment, later it should process frequency-domain CQI information and/or PMI information.  Currently it just returns the first PRBS that are available in the subframe based on the number requested.
@param UE_id Index of UE on which to act
@param nb_rb Number of PRBs allocated to UE by scheduler
knopp's avatar
knopp committed
365
@param N_RB_DL Number of PRBs on DL
366 367 368
@param rballoc Pointer to bit-map of current PRB allocation given to previous users/control channels.  This is updated for subsequent calls to the routine.
@returns an rballoc bitmap for resource type 0 allocation (DCI).
*/
knopp's avatar
knopp committed
369
uint32_t allocate_prbs(int UE_id,uint8_t nb_rb, int N_RB_DL, uint32_t *rballoc);
370 371

/* \fn uint32_t req_new_ulsch(module_id_t module_idP)
372
\brief check for a new transmission in any drb
373 374 375 376 377 378 379
@param Mod_id Instance id of UE in machine
@returns 1 for new transmission, 0 for none
*/
uint32_t req_new_ulsch(module_id_t module_idP);

/* \brief Get SR payload (0,1) from UE MAC
@param Mod_id Instance id of UE in machine
knopp's avatar
 
knopp committed
380
@param CC_id Component Carrier index
381 382 383 384 385
@param eNB_id Index of eNB that UE is attached to
@param rnti C_RNTI of UE
@param subframe subframe number
@returns 0 for no SR, 1 for SR
*/
knopp's avatar
 
knopp committed
386
uint32_t ue_get_SR(module_id_t module_idP, int CC_id,frame_t frameP, uint8_t eNB_id,rnti_t rnti,sub_frame_t subframe);
387

388
uint8_t get_ue_weight(module_id_t module_idP, int CC_id, int UE_id);
389 390 391 392

// UE functions
void mac_out_of_sync_ind(module_id_t module_idP, frame_t frameP, uint16_t CH_index);

knopp's avatar
 
knopp committed
393
void ue_decode_si(module_id_t module_idP, int CC_id,frame_t frame, uint8_t CH_index, void *pdu, uint16_t len);
394

395 396
void ue_decode_p(module_id_t module_idP, int CC_id,frame_t frame, uint8_t CH_index, void *pdu, uint16_t len);

397

398
void ue_send_sdu(module_id_t module_idP, uint8_t CC_id,frame_t frame, sub_frame_t subframe, uint8_t *sdu,uint16_t sdu_len,uint8_t CH_index);
399 400


Cedric Roux's avatar
Cedric Roux committed
401
#if defined(Rel10) || defined(Rel14)
402 403 404 405 406 407 408 409
/* \brief Called by PHY to transfer MCH transport block to ue MAC.
@param Mod_id Index of module instance
@param frame Frame index
@param sdu Pointer to transport block
@param sdu_len Length of transport block
@param eNB_index Index of attached eNB
@param sync_area the index of MBSFN sync area
*/
410
void ue_send_mch_sdu(module_id_t module_idP,uint8_t CC_id, frame_t frameP,uint8_t *sdu,uint16_t sdu_len,uint8_t eNB_index,uint8_t sync_area) ;
411 412 413 414 415 416 417 418 419

/*\brief Function to check if UE PHY needs to decode MCH for MAC.
@param Mod_id Index of protocol instance
@param frame Index of frame
@param subframe Index of subframe
@param eNB_index index of eNB for this MCH
@param[out] sync_area return the sync area
@param[out] mcch_active flag indicating whether this MCCH is active in this SF
*/
420
int ue_query_mch(uint8_t Mod_id,uint8_t CC_id, uint32_t frame,sub_frame_t subframe, uint8_t eNB_index, uint8_t *sync_area, uint8_t *mcch_active);
421 422 423

#endif

424
/* \brief Called by PHY to get sdu for PUSCH transmission.  It performs the following operations: Checks BSR for DCCH, DCCH1 and DTCH corresponding to previous values computed either in SR or BSR procedures.  It gets rlc status indications on DCCH,DCCH1 and DTCH and forms BSR elements and PHR in MAC header.  CRNTI element is not supported yet.  It computes transport block for up to 3 SDUs and generates header and forms the complete MAC SDU.
425 426 427 428 429 430
@param Mod_id Instance id of UE in machine
@param eNB_id Index of eNB that UE is attached to
@param rnti C_RNTI of UE
@param subframe subframe number
@returns 0 for no SR, 1 for SR
*/
knopp's avatar
 
knopp committed
431
void ue_get_sdu(module_id_t module_idP, int CC_id,frame_t frameP, sub_frame_t subframe, uint8_t eNB_index,uint8_t *ulsch_buffer,uint16_t buflen,uint8_t *access_mode);
432 433 434

/* \brief Function called by PHY to retrieve information to be transmitted using the RA procedure.  If the UE is not in PUSCH mode for a particular eNB index, this is assumed to be an Msg3 and MAC attempts to retrieves the CCCH message from RRC. If the UE is in PUSCH mode for a particular eNB index and PUCCH format 0 (Scheduling Request) is not activated, the MAC may use this resource for random-access to transmit a BSR along with the C-RNTI control element (see 5.1.4 from 36.321)
@param Mod_id Index of UE instance
knopp's avatar
 
knopp committed
435
@param Mod_id Component Carrier Index
436 437 438
@param New_Msg3 Flag to indicate this call is for a new Msg3
@param subframe Index of subframe for PRACH transmission (0 ... 9)
@returns A pointer to a PRACH_RESOURCES_t */
knopp's avatar
 
knopp committed
439
PRACH_RESOURCES_t *ue_get_rach(module_id_t module_idP,int CC_id,frame_t frameP,uint8_t new_Msg3,sub_frame_t subframe);
440 441 442

/* \brief Function called by PHY to process the received RAR.  It checks that the preamble matches what was sent by the eNB and provides the timing advance and t-CRNTI.
@param Mod_id Index of UE instance
443 444 445
@param CC_id Index to a component carrier
@param frame Frame index
@param ra_rnti RA_RNTI value
446 447
@param dlsch_buffer  Pointer to dlsch_buffer containing RAR PDU
@param t_crnti Pointer to PHY variable containing the T_CRNTI
448
@param preamble_index Preamble Index used by PHY to transmit the PRACH.  This should match the received RAR to trigger the rest of
449
random-access procedure
450
@param selected_rar_buffer the output buffer for storing the selected RAR header and RAR payload
451 452
@returns timing advance or 0xffff if preamble doesn't match
*/
453 454 455 456 457
uint16_t
ue_process_rar(
  const module_id_t module_idP,
  const int CC_id,
  const frame_t frameP,
458
  const rnti_t ra_rnti,
459 460
  uint8_t * const dlsch_buffer,
  rnti_t * const t_crnti,
461 462
  const uint8_t preamble_index,
  uint8_t* selected_rar_buffer
463
);
464 465 466


/* \brief Generate header for UL-SCH.  This function parses the desired control elements and sdus and generates the header as described
467
in 36-321 MAC layer specifications.  It returns the number of bytes used for the header to be used as an offset for the payload
468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494
in the ULSCH buffer.
@param mac_header Pointer to the first byte of the MAC header (UL-SCH buffer)
@param num_sdus Number of SDUs in the payload
@param short_padding Number of bytes for short padding (0,1,2)
@param sdu_lengths Pointer to array of SDU lengths
@param sdu_lcids Pointer to array of LCIDs (the order must be the same as the SDU length array)
@param power_headroom Pointer to power headroom command (NULL means not present in payload)
@param crnti Pointer to CRNTI command (NULL means not present in payload)
@param truncated_bsr Pointer to Truncated BSR command (NULL means not present in payload)
@param short_bsr Pointer to Short BSR command (NULL means not present in payload)
@param long_bsr Pointer to Long BSR command (NULL means not present in payload)
@param post_padding Number of bytes for padding at the end of MAC PDU
@returns Number of bytes used for header
*/
unsigned char generate_ulsch_header(uint8_t *mac_header,
                                    uint8_t num_sdus,
                                    uint8_t short_padding,
                                    uint16_t *sdu_lengths,
                                    uint8_t *sdu_lcids,
                                    POWER_HEADROOM_CMD *power_headroom,
                                    uint16_t *crnti,
                                    BSR_SHORT *truncated_bsr,
                                    BSR_SHORT *short_bsr,
                                    BSR_LONG *long_bsr,
                                    unsigned short post_padding);

/* \brief Parse header for UL-SCH.  This function parses the received UL-SCH header as described
495
in 36-321 MAC layer specifications.  It returns the number of bytes used for the header to be used as an offset for the payload
496 497 498 499 500 501 502 503 504 505
in the ULSCH buffer.
@param mac_header Pointer to the first byte of the MAC header (UL-SCH buffer)
@param num_ces Number of SDUs in the payload
@param num_sdu Number of SDUs in the payload
@param rx_ces Pointer to received CEs in the header
@param rx_lcids Pointer to array of LCIDs (the order must be the same as the SDU length array)
@param rx_lengths Pointer to array of SDU lengths
@returns Pointer to payload following header
*/
uint8_t *parse_ulsch_header(uint8_t *mac_header,
506 507 508 509 510 511
                            uint8_t *num_ce,
                            uint8_t *num_sdu,
                            uint8_t *rx_ces,
                            uint8_t *rx_lcids,
                            uint16_t *rx_lengths,
                            uint16_t tx_lenght);
512

knopp's avatar
knopp committed
513 514
int to_prb(int);
int to_rbg(int);
knopp's avatar
 
knopp committed
515
int l2_init(LTE_DL_FRAME_PARMS *frame_parms,int eMBMS_active, char *uecap_xer, uint8_t cba_group_active, uint8_t HO_active);
516
int mac_init(void);
knopp's avatar
 
knopp committed
517
int add_new_ue(module_id_t Mod_id, int CC_id, rnti_t rnti,int harq_pid);
518
int rrc_mac_remove_ue(module_id_t Mod_id, rnti_t rntiP);
519

520 521 522 523 524

int maxround(module_id_t Mod_id,uint16_t rnti,int frame,sub_frame_t subframe,uint8_t ul_flag);
void swap_UEs(UE_list_t *listP,int nodeiP, int nodejP, int ul_flag);
int prev(UE_list_t *listP, int nodeP, int ul_flag);
void dump_ue_list(UE_list_t *listP, int ul_flag);
525 526 527 528
int UE_num_active_CC(UE_list_t *listP,int ue_idP);
int UE_PCCID(module_id_t mod_idP,int ue_idP);
rnti_t UE_RNTI(module_id_t mod_idP, int ue_idP);

529

530
void ulsch_scheduler_pre_processor(module_id_t module_idP, int frameP, sub_frame_t subframeP, uint16_t *first_rb);
531 532 533 534
void store_ulsch_buffer(module_id_t module_idP, int frameP, sub_frame_t subframeP);
void sort_ue_ul (module_id_t module_idP,int frameP, sub_frame_t subframeP);
void assign_max_mcs_min_rb(module_id_t module_idP,int frameP, sub_frame_t subframeP,uint16_t *first_rb);
void adjust_bsr_info(int buffer_occupancy, uint16_t TBS, UE_TEMPLATE *UE_template);
535
int phy_stats_exist(module_id_t Mod_id, int rnti);
536

537
/*! \fn  UE_L2_state_t ue_scheduler(const module_id_t module_idP,const frame_t frameP, const sub_frame_t subframe, const lte_subframe_t direction,const uint8_t eNB_index)
538
   \brief UE scheduler where all the ue background tasks are done.  This function performs the following:  1) Trigger PDCP every 5ms 2) Call RRC for link status return to PHY3) Perform SR/BSR procedures for scheduling feedback 4) Perform PHR procedures.
539
\param[in] module_idP instance of the UE
540 541 542 543
\param[in] rxFrame the RX frame number
\param[in] rxSubframe the RX subframe number
\param[in] txFrame the TX frame number
\param[in] txSubframe the TX subframe number
544 545 546 547
\param[in] direction  subframe direction
\param[in] eNB_index  instance of eNB
@returns L2 state (CONNETION_OK or CONNECTION_LOST or PHY_RESYNCH)
*/
548 549
UE_L2_STATE_t ue_scheduler(
  const module_id_t module_idP,
550 551 552 553
  const frame_t rxFrameP,
  const sub_frame_t rxSubframe,
  const frame_t txFrameP,
  const sub_frame_t txSubframe,
554 555 556
  const lte_subframe_t direction,
  const uint8_t eNB_index,
  const int CC_id);
557

558
/*! \fn  int cba_access(module_id_t module_idP,frame_t frameP,sub_frame_t subframe, uint8_t eNB_index,uint16_t buflen);
559 560 561 562 563
\brief determine whether to use cba resource to transmit or not
\param[in] Mod_id instance of the UE
\param[in] frame the frame number
\param[in] subframe the subframe number
\param[in] eNB_index instance of eNB
564
\param[out] access(1) or postpone (0)
565
*/
566
int cba_access(module_id_t module_idP,frame_t frameP,sub_frame_t subframe, uint8_t eNB_index,uint16_t buflen);
567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583

/*! \fn  BSR_SHORT *  get_bsr_short(module_id_t module_idP, uint8_t bsr_len)
\brief get short bsr level
\param[in] Mod_id instance of the UE
\param[in] bsr_len indicator for no, short, or long bsr
\param[out] bsr_s pointer to short bsr
*/
BSR_SHORT *get_bsr_short(module_id_t module_idP, uint8_t bsr_len);

/*! \fn  BSR_LONG * get_bsr_long(module_id_t module_idP, uint8_t bsr_len)
\brief get long bsr level
\param[in] Mod_id instance of the UE
\param[in] bsr_len indicator for no, short, or long bsr
\param[out] bsr_l pointer to long bsr
*/
BSR_LONG * get_bsr_long(module_id_t module_idP, uint8_t bsr_len);

fnabet's avatar
fnabet committed
584
/*! \fn  boolean_t update_bsr(module_id_t module_idP, frame_t frameP,sub_frame_t subframeP)
585
   \brief get the rlc stats and update the bsr level for each lcid
586 587 588
\param[in] Mod_id instance of the UE
\param[in] frame Frame index
*/
fnabet's avatar
fnabet committed
589
boolean_t update_bsr(module_id_t module_idP, frame_t frameP, sub_frame_t subframeP,eNB_index_t eNB_index);
590

fnabet's avatar
fnabet committed
591
/*! \fn  locate_BsrIndexByBufferSize (int *table, int size, int value)
592
   \brief locate the BSR level in the table as defined in 36.321. This function requires that he values in table to be monotonic, either increasing or decreasing. The returned value is not less than 0, nor greater than n-1, where n is the size of table.
593 594
\param[in] *table Pointer to BSR table
\param[in] size Size of the table
595
\param[in] value Value of the buffer
596 597
\return the index in the BSR_LEVEL table
*/
fnabet's avatar
fnabet committed
598
uint8_t locate_BsrIndexByBufferSize (const uint32_t *table, int size, int value);
599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642


/*! \fn  int get_sf_periodicBSRTimer(uint8_t periodicBSR_Timer)
   \brief get the number of subframe from the periodic BSR timer configured by the higher layers
\param[in] periodicBSR_Timer timer for periodic BSR
\return the number of subframe
*/
int get_sf_periodicBSRTimer(uint8_t bucketSize);

/*! \fn  int get_ms_bucketsizeduration(uint8_t bucketSize)
   \brief get the time in ms form the bucket size duration configured by the higher layer
\param[in]  bucketSize the bucket size duration
\return the time in ms
*/
int get_ms_bucketsizeduration(uint8_t bucketsizeduration);

/*! \fn  int get_sf_retxBSRTimer(uint8_t retxBSR_Timer)
   \brief get the number of subframe form the bucket size duration configured by the higher layer
\param[in]  retxBSR_Timer timer for regular BSR
\return the time in sf
*/
int get_sf_retxBSRTimer(uint8_t retxBSR_Timer);

/*! \fn  int get_sf_perioidicPHR_Timer(uint8_t perioidicPHR_Timer){
   \brief get the number of subframe form the periodic PHR timer configured by the higher layer
\param[in]  perioidicPHR_Timer timer for reguluar PHR
\return the time in sf
*/
int get_sf_perioidicPHR_Timer(uint8_t perioidicPHR_Timer);

/*! \fn  int get_sf_prohibitPHR_Timer(uint8_t prohibitPHR_Timer)
   \brief get the number of subframe form the prohibit PHR duration configured by the higher layer
\param[in]  prohibitPHR_Timer timer for  PHR
\return the time in sf
*/
int get_sf_prohibitPHR_Timer(uint8_t prohibitPHR_Timer);

/*! \fn  int get_db_dl_PathlossChange(uint8_t dl_PathlossChange)
   \brief get the db form the path loss change configured by the higher layer
\param[in]  dl_PathlossChange path loss for PHR
\return the pathloss in db
*/
int get_db_dl_PathlossChange(uint8_t dl_PathlossChange);

knopp's avatar
 
knopp committed
643
/*! \fn  uint8_t get_phr_mapping (module_id_t module_idP, int CC_id,uint8_t eNB_index)
644 645
   \brief get phr mapping as described in 36.313
\param[in]  Mod_id index of eNB
knopp's avatar
 
knopp committed
646
\param[in] CC_id Component Carrier Index
647 648
\return phr mapping
*/
knopp's avatar
 
knopp committed
649
uint8_t get_phr_mapping (module_id_t module_idP, int CC_id, uint8_t eNB_index);
650 651 652 653

/*! \fn  void update_phr (module_id_t module_idP)
   \brief update/reset the phr timers
\param[in]  Mod_id index of eNB
knopp's avatar
 
knopp committed
654
\param[in] CC_id Component carrier index
655 656
\return void
*/
knopp's avatar
 
knopp committed
657
void update_phr (module_id_t module_idP,int CC_id);
658 659 660 661 662

/*! \brief Function to indicate Msg3 transmission/retransmission which initiates/reset Contention Resolution Timer
\param[in] Mod_id Instance index of UE
\param[in] eNB_id Index of eNB
*/
663
void Msg3_tx(module_id_t module_idP,uint8_t CC_id,frame_t frameP,uint8_t eNB_id);
664 665 666 667 668 669 670


/*! \brief Function to indicate the transmission of msg1/rach
\param[in] Mod_id Instance index of UE
\param[in] eNB_id Index of eNB
*/

671
void Msg1_tx(module_id_t module_idP,uint8_t CC_id,frame_t frameP, uint8_t eNB_id);
672 673 674 675 676 677 678 679 680 681

void dl_phy_sync_success(module_id_t   module_idP,
                         frame_t       frameP,
                         unsigned char eNB_index,
                         uint8_t first_sync);

int dump_eNB_l2_stats(char *buffer, int length);

double uniform_rngen(int min, int max);

682
/*
683
void add_common_dci(DCI_PDU *DCI_pdu,
684 685 686 687 688 689 690
                    void *pdu,
                    rnti_t rnti,
                    unsigned char dci_size_bytes,
                    unsigned char aggregation,
                    unsigned char dci_size_bits,
                    unsigned char dci_fmt,
                    uint8_t ra_flag);
691
*/
692

knopp's avatar
knopp committed
693
uint32_t allocate_prbs_sub(int nb_rb, int N_RB_DL, int N_RBG, uint8_t *rballoc);
694

695 696
void update_ul_dci(module_id_t module_idP,uint8_t CC_id,rnti_t rnti,uint8_t dai);

697 698
int get_bw_index(module_id_t module_id, uint8_t CC_id);

699 700
int get_min_rb_unit(module_id_t module_idP, uint8_t CC_id);

701
/* \brief Generate header for DL-SCH.  This function parses the desired control elements and sdus and generates the header as described
702
in 36-321 MAC layer specifications.  It returns the number of bytes used for the header to be used as an offset for the payload
703 704 705 706 707
in the DLSCH buffer.
@param mac_header Pointer to the first byte of the MAC header (DL-SCH buffer)
@param num_sdus Number of SDUs in the payload
@param sdu_lengths Pointer to array of SDU lengths
@param sdu_lcids Pointer to array of LCIDs (the order must be the same as the SDU length array)
708
@param drx_cmd dicontinous reception command
709 710 711
@param timing_advancd_cmd timing advanced command
@param ue_cont_res_id Pointer to contention resolution identifier (NULL means not present in payload)
@param short_padding Number of bytes for short padding (0,1,2)
712
@param post_padding number of bytes for padding at the end of MAC PDU
713 714 715
@returns Number of bytes used for header
*/
unsigned char generate_dlsch_header(unsigned char *mac_header,
716 717 718 719
                                    unsigned char num_sdus,
                                    unsigned short *sdu_lengths,
                                    unsigned char *sdu_lcids,
                                    unsigned char drx_cmd,
720
                                    unsigned short timing_advance_cmd,
721 722 723
                                    unsigned char *ue_cont_res_id,
                                    unsigned char short_padding,
                                    unsigned short post_padding);
724

725
/** \brief RRC eNB Configuration primitive for PHY/MAC.  Allows configuration of PHY/MAC resources based on System Information (SI), RRCConnectionSetup and RRCConnectionReconfiguration messages.
726
@param Mod_id Instance ID of eNB
727
@param CC_id Component Carrier of the eNB
728
@param mib Pointer to MIB
729

730
@param radioResourceConfigCommon Structure from SIB2 for common radio parameters (if NULL keep existing configuration)
731
@param physicalConfigDedicated Structure from RRCConnectionSetup or RRCConnectionReconfiguration for dedicated PHY parameters (if NULL keep existing configuration)
732 733
@param measObj Structure from RRCConnectionReconfiguration for UE measurement procedures
@param mac_MainConfig Structure from RRCConnectionSetup or RRCConnectionReconfiguration for dedicated MAC parameters (if NULL keep existing configuration)
734
@param logicalChannelIdentity Logical channel identity index of corresponding logical channel config
735 736 737 738
@param logicalChannelConfig Pointer to logical channel configuration
@param measGapConfig Measurement Gap configuration for MAC (if NULL keep existing configuration)
@param tdd_Config TDD Configuration from SIB1 (if NULL keep existing configuration)
@param mobilityControlInfo mobility control info received for Handover
739
@param SchedInfoList SI Scheduling information
740 741 742 743
@param MBMS_Flag indicates MBMS transmission
@param mbsfn_SubframeConfigList pointer to mbsfn subframe configuration list from SIB2
@param mbsfn_AreaInfoList pointer to MBSFN Area Info list from SIB13
@param pmch_InfoList pointer to PMCH_InfoList from MBSFNAreaConfiguration Message (MCCH Message)
744
@param sib1_ext_r13 SI Scheduling information for SI-BR UEs         
745
*/
746

747 748 749 750 751 752 753
int rrc_mac_config_req_eNB(module_id_t                             module_idP,
			   int                                     CC_id,
			   int                                     physCellId,
			   int                                     p_eNB,
			   int                                     Ncp,
			   int                                     eutra_band,
			   uint32_t                                dl_CarrierFreq,
754
#ifdef Rel14
755
                           int                                     pbch_repetition,
756
#endif
757 758 759
			   rnti_t                                  rntiP,
			   BCCH_BCH_Message_t                      *mib,
 			   RadioResourceConfigCommonSIB_t          *radioResourceConfigCommon,
760
#ifdef Rel14
761
 			   RadioResourceConfigCommonSIB_t          *radioResourceConfigCommon_BR,
762
#endif
763
			   struct PhysicalConfigDedicated          *physicalConfigDedicated,
Cedric Roux's avatar
Cedric Roux committed
764
#if defined(Rel10) || defined(Rel14)
765
			   SCellToAddMod_r10_t                     *sCellToAddMod_r10,
766
			   //struct PhysicalConfigDedicatedSCell_r10 *physicalConfigDedicatedSCell_r10,
767
#endif
768 769 770 771 772 773 774 775 776 777 778 779
			   MeasObjectToAddMod_t                    **measObj,
			   MAC_MainConfig_t                        *mac_MainConfig,
			   long                                    logicalChannelIdentity,
			   LogicalChannelConfig_t                  *logicalChannelConfig,
			   MeasGapConfig_t                         *measGapConfig,
			   TDD_Config_t                            *tdd_Config,
			   MobilityControlInfo_t                   *mobilityControlInfo,
			   SchedulingInfoList_t                    *schedulingInfoList,
			   uint32_t                                ul_CarrierFreq,
			   long                                    *ul_Bandwidth,
			   AdditionalSpectrumEmission_t            *additionalSpectrumEmission,
			   struct MBSFN_SubframeConfigList         *mbsfn_SubframeConfigList
Cedric Roux's avatar
Cedric Roux committed
780
#if defined(Rel10) || defined(Rel14)
781 782 783 784 785
			   ,
			   uint8_t                                 MBMS_Flag,
			   MBSFN_AreaInfoList_r9_t                 *mbsfn_AreaInfoList,
			   PMCH_InfoList_r9_t                      *pmch_InfoList
			   
786
#endif
787 788 789
#ifdef Rel14
			   ,
			   SystemInformationBlockType1_v1310_IEs_t *sib1_ext_r13          
790
#endif
791
			   );
792

793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817
/** \brief RRC eNB Configuration primitive for PHY/MAC.  Allows configuration of PHY/MAC resources based on System Information (SI), RRCConnectionSetup and RRCConnectionReconfiguration messages.
@param Mod_id Instance ID of ue
@param CC_id Component Carrier of the ue
@param eNB_id Index of eNB
@param radioResourceConfigCommon Structure from SIB2 for common radio parameters (if NULL keep existing configuration)
@param physcialConfigDedicated Structure from RRCConnectionSetup or RRCConnectionReconfiguration for dedicated PHY parameters (if NULL keep existing configuration)
@param measObj Structure from RRCConnectionReconfiguration for UE measurement procedures
@param mac_MainConfig Structure from RRCConnectionSetup or RRCConnectionReconfiguration for dedicated MAC parameters (if NULL keep existing configuration)
@param logicalChannelIdentity Logical channel identity index of corresponding logical channel config
@param logicalChannelConfig Pointer to logical channel configuration
@param measGapConfig Measurement Gap configuration for MAC (if NULL keep existing configuration)
@param tdd_Config TDD Configuration from SIB1 (if NULL keep existing configuration)
@param mobilityControlInfo mobility control info received for Handover
@param SIwindowsize SI Windowsize from SIB1 (if NULL keep existing configuration)
@param SIperiod SI Period from SIB1 (if NULL keep existing configuration)
@param MBMS_Flag indicates MBMS transmission
@param mbsfn_SubframeConfigList pointer to mbsfn subframe configuration list from SIB2
@param mbsfn_AreaInfoList pointer to MBSFN Area Info list from SIB13
@param pmch_InfoList pointer to PMCH_InfoList from MBSFNAreaConfiguration Message (MCCH Message)
*/
int rrc_mac_config_req_ue(module_id_t     module_idP,
			  int             CC_id,
			  uint8_t         eNB_index,
			  RadioResourceConfigCommonSIB_t *radioResourceConfigCommon,
			  struct PhysicalConfigDedicated *physicalConfigDedicated,
818
#if defined(Rel10) || defined(Rel14)
819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834
			  SCellToAddMod_r10_t *sCellToAddMod_r10,
			  //struct PhysicalConfigDedicatedSCell_r10 *physicalConfigDedicatedSCell_r10,
#endif
			  MeasObjectToAddMod_t **measObj,
			  MAC_MainConfig_t *mac_MainConfig,
			  long logicalChannelIdentity,
			  LogicalChannelConfig_t *logicalChannelConfig,
			  MeasGapConfig_t *measGapConfig,
			  TDD_Config_t *tdd_Config,
			  MobilityControlInfo_t *mobilityControlInfo,
			  uint8_t *SIwindowsize,
			  uint16_t *SIperiod,
			  ARFCN_ValueEUTRA_t *ul_CarrierFreq,
			  long *ul_Bandwidth,
			  AdditionalSpectrumEmission_t *additionalSpectrumEmission,
			  struct MBSFN_SubframeConfigList *mbsfn_SubframeConfigList
835
#if defined(Rel10) || defined(Rel14)
836 837 838 839 840 841 842 843 844 845 846 847 848
			  ,
			  uint8_t MBMS_Flag,
			  MBSFN_AreaInfoList_r9_t *mbsfn_AreaInfoList,
			  PMCH_InfoList_r9_t *pmch_InfoList
			  
#endif
#ifdef CBA
			  ,
			  uint8_t num_active_cba_groups,
			  uint16_t cba_rnti
#endif
			  );

849
uint16_t getRIV(uint16_t N_RB_DL,uint16_t RBstart,uint16_t Lcrbs);
850

851
int get_subbandsize(uint8_t dl_bandwidth);
852

853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878
uint8_t subframe2harqpid(COMMON_channels_t *cc,uint32_t frame,uint8_t subframe);

void get_Msg3allocret(COMMON_channels_t *cc,
		      unsigned char current_subframe,
		      unsigned int current_frame,
		      unsigned int *frame,
		      unsigned char *subframe);

void get_Msg3alloc(COMMON_channels_t *cc,
		   unsigned char current_subframe,
		   unsigned int current_frame,
		   unsigned int *frame,
		   unsigned char *subframe);

uint16_t mac_computeRIV(uint16_t N_RB_DL,uint16_t RBstart,uint16_t Lcrbs);

int get_phich_resource_times6(COMMON_channels_t *cc);

int to_rbg(int dl_Bandwidth);

int to_prb(int dl_Bandwidth);

uint8_t get_Msg3harqpid(COMMON_channels_t *cc,
			uint32_t frame,
			unsigned char current_subframe);

879
#endif
880
/** @}*/