phy_procedures_lte_ue.c

/*
 * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The OpenAirInterface Software Alliance licenses this file to You under
 * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 * except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.openairinterface.org/?page_id=698
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *-------------------------------------------------------------------------------
 * For more information about the OpenAirInterface (OAI) Software Alliance:
 *      contact@openairinterface.org
 */

/*! \file phy_procedures_lte_ue.c
 * \brief Implementation of UE procedures from 36.213 LTE specifications
 * \author R. Knopp, F. Kaltenberger, N. Nikaein
 * \date 2011
 * \version 0.1
 * \company Eurecom
 * \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr, navid.nikaein@eurecom.fr
 * \note
 * \warning
 */

#define _GNU_SOURCE

#include "assertions.h"
#include "PHY/defs_UE.h"
#include "PHY/phy_extern_ue.h"
#include <sched.h>
#include "targets/RT/USER/lte-softmodem.h"

#include "PHY/LTE_UE_TRANSPORT/transport_proto_ue.h"
#include "SCHED_UE/sched_UE.h"
#include "PHY/MODULATION/modulation_UE.h"
#include "PHY/LTE_ESTIMATION/lte_estimation.h"

//#define DEBUG_PHY_PROC

#ifndef PUCCH
#define PUCCH
#endif

#include "LAYER2/MAC/mac.h"
#include "UTIL/LOG/log.h"

#include "UTIL/LOG/vcd_signal_dumper.h"
#include "UTIL/OPT/opt.h"

#if defined(ENABLE_ITTI)
# include "intertask_interface.h"
#endif

#include "PHY/defs_UE.h"

#include "PHY/CODING/coding_extern.h"

#include "T.h"

#include "PHY/TOOLS/tools_defs.h"

#define DLSCH_RB_ALLOC 0x1fbf  // skip DC RB (total 23/25 RBs)
#define DLSCH_RB_ALLOC_12 0x0aaa  // skip DC RB (total 23/25 RBs)

#define NS_PER_SLOT 500000

extern double cpuf;

void Msg1_transmitted(module_id_t module_idP,uint8_t CC_id,frame_t frameP, uint8_t eNB_id);
void Msg3_transmitted(module_id_t module_idP,uint8_t CC_id,frame_t frameP, uint8_t eNB_id);

#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
extern uint32_t downlink_frequency[MAX_NUM_CCs][4];
#endif


//#define UE_DEBUG_TRACE 1

void dump_dlsch(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t subframe,uint8_t harq_pid)
{
  unsigned int coded_bits_per_codeword;
  uint8_t nsymb = (ue->frame_parms.Ncp == 0) ? 14 : 12;

  coded_bits_per_codeword = get_G(&ue->frame_parms,
                                  ue->dlsch[ue->current_thread_id[subframe]][eNB_id][0]->harq_processes[harq_pid]->nb_rb,
                                  ue->dlsch[ue->current_thread_id[subframe]][eNB_id][0]->harq_processes[harq_pid]->rb_alloc_even,
                                  ue->dlsch[ue->current_thread_id[subframe]][eNB_id][0]->harq_processes[harq_pid]->Qm,
                                  ue->dlsch[ue->current_thread_id[subframe]][eNB_id][0]->harq_processes[harq_pid]->Nl,
                                  ue->pdcch_vars[0%RX_NB_TH][eNB_id]->num_pdcch_symbols,
                                  proc->frame_rx,
          subframe,
          ue->transmission_mode[eNB_id]<7?0:ue->transmission_mode[eNB_id]);

  LOG_M("rxsigF0.m","rxsF0", ue->common_vars.common_vars_rx_data_per_thread[ue->current_thread_id[subframe]].rxdataF[0],2*nsymb*ue->frame_parms.ofdm_symbol_size,2,1);
  LOG_M("rxsigF0_ext.m","rxsF0_ext", ue->pdsch_vars[ue->current_thread_id[subframe]][0]->rxdataF_ext[0],2*nsymb*ue->frame_parms.ofdm_symbol_size,1,1);
  LOG_M("dlsch00_ch0_ext.m","dl00_ch0_ext", ue->pdsch_vars[ue->current_thread_id[subframe]][0]->dl_ch_estimates_ext[0],300*nsymb,1,1);
  /*
    LOG_M("dlsch01_ch0_ext.m","dl01_ch0_ext",pdsch_vars[0]->dl_ch_estimates_ext[1],300*12,1,1);
    LOG_M("dlsch10_ch0_ext.m","dl10_ch0_ext",pdsch_vars[0]->dl_ch_estimates_ext[2],300*12,1,1);
    LOG_M("dlsch11_ch0_ext.m","dl11_ch0_ext",pdsch_vars[0]->dl_ch_estimates_ext[3],300*12,1,1);
    LOG_M("dlsch_rho.m","dl_rho",pdsch_vars[0]->rho[0],300*12,1,1);
  */
  LOG_M("dlsch_rxF_comp0.m","dlsch0_rxF_comp0", ue->pdsch_vars[ue->current_thread_id[subframe]][0]->rxdataF_comp0[0],300*12,1,1);
  LOG_M("dlsch_rxF_llr.m","dlsch_llr", ue->pdsch_vars[ue->current_thread_id[subframe]][0]->llr[0],coded_bits_per_codeword,1,0);

  LOG_M("dlsch_mag1.m","dlschmag1",ue->pdsch_vars[ue->current_thread_id[subframe]][0]->dl_ch_mag0,300*12,1,1);
  LOG_M("dlsch_mag2.m","dlschmag2",ue->pdsch_vars[ue->current_thread_id[subframe]][0]->dl_ch_magb0,300*12,1,1);
}

void dump_dlsch_SI(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t subframe)
{
  unsigned int coded_bits_per_codeword;
  uint8_t nsymb = ((ue->frame_parms.Ncp == 0) ? 14 : 12);

  coded_bits_per_codeword = get_G(&ue->frame_parms,
                                  ue->dlsch_SI[eNB_id]->harq_processes[0]->nb_rb,
                                  ue->dlsch_SI[eNB_id]->harq_processes[0]->rb_alloc_even,
                                  2,
                                  1,
                                  ue->pdcch_vars[0%RX_NB_TH][eNB_id]->num_pdcch_symbols,
                                  proc->frame_rx,
          subframe,
          0);
  LOG_D(PHY,"[UE %d] Dumping dlsch_SI : ofdm_symbol_size %d, nsymb %d, nb_rb %d, mcs %d, nb_rb %d, num_pdcch_symbols %d,G %d\n",
        ue->Mod_id,
  ue->frame_parms.ofdm_symbol_size,
  nsymb,
        ue->dlsch_SI[eNB_id]->harq_processes[0]->nb_rb,
        ue->dlsch_SI[eNB_id]->harq_processes[0]->mcs,
        ue->dlsch_SI[eNB_id]->harq_processes[0]->nb_rb,
        ue->pdcch_vars[0%RX_NB_TH][eNB_id]->num_pdcch_symbols,
        coded_bits_per_codeword);

  LOG_M("rxsig0.m","rxs0", &ue->common_vars.rxdata[0][subframe*ue->frame_parms.samples_per_tti],ue->frame_parms.samples_per_tti,1,1);

  LOG_M("rxsigF0.m","rxsF0", ue->common_vars.common_vars_rx_data_per_thread[ue->current_thread_id[subframe]].rxdataF[0],nsymb*ue->frame_parms.ofdm_symbol_size,1,1);
  LOG_M("rxsigF0_ext.m","rxsF0_ext", ue->pdsch_vars_SI[0]->rxdataF_ext[0],2*nsymb*ue->frame_parms.ofdm_symbol_size,1,1);
  LOG_M("dlsch00_ch0_ext.m","dl00_ch0_ext", ue->pdsch_vars_SI[0]->dl_ch_estimates_ext[0],ue->frame_parms.N_RB_DL*12*nsymb,1,1);
  /*
    LOG_M("dlsch01_ch0_ext.m","dl01_ch0_ext",pdsch_vars[0]->dl_ch_estimates_ext[1],300*12,1,1);
    LOG_M("dlsch10_ch0_ext.m","dl10_ch0_ext",pdsch_vars[0]->dl_ch_estimates_ext[2],300*12,1,1);
    LOG_M("dlsch11_ch0_ext.m","dl11_ch0_ext",pdsch_vars[0]->dl_ch_estimates_ext[3],300*12,1,1);
    LOG_M("dlsch_rho.m","dl_rho",pdsch_vars[0]->rho[0],300*12,1,1);
  */
  LOG_M("dlsch_rxF_comp0.m","dlsch0_rxF_comp0", ue->pdsch_vars_SI[0]->rxdataF_comp0[0],ue->frame_parms.N_RB_DL*12*nsymb,1,1);
  LOG_M("dlsch_rxF_llr.m","dlsch_llr", ue->pdsch_vars_SI[0]->llr[0],coded_bits_per_codeword,1,0);

  LOG_M("dlsch_mag1.m","dlschmag1",ue->pdsch_vars_SI[0]->dl_ch_mag0,300*nsymb,1,1);
  LOG_M("dlsch_mag2.m","dlschmag2",ue->pdsch_vars_SI[0]->dl_ch_magb0,300*nsymb,1,1);
  sleep(1);
  exit(-1);
}

#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
//unsigned int gain_table[31] = {100,112,126,141,158,178,200,224,251,282,316,359,398,447,501,562,631,708,794,891,1000,1122,1258,1412,1585,1778,1995,2239,2512,2818,3162};
/*
  unsigned int get_tx_amp_prach(int power_dBm, int power_max_dBm, int N_RB_UL)
  {

  int gain_dB = power_dBm - power_max_dBm;
  int amp_x_100;

  switch (N_RB_UL) {
  case 6:
  amp_x_100 = AMP;      // PRACH is 6 PRBS so no scale
  break;
  case 15:
  amp_x_100 = 158*AMP;  // 158 = 100*sqrt(15/6)
  break;
  case 25:
  amp_x_100 = 204*AMP;  // 204 = 100*sqrt(25/6)
  break;
  case 50:
  amp_x_100 = 286*AMP;  // 286 = 100*sqrt(50/6)
  break;
  case 75:
  amp_x_100 = 354*AMP;  // 354 = 100*sqrt(75/6)
  break;
  case 100:
  amp_x_100 = 408*AMP;  // 408 = 100*sqrt(100/6)
  break;
  default:
  LOG_E(PHY,"Unknown PRB size %d\n",N_RB_UL);
  mac_xface->macphy_exit("");
  break;
  }
  if (gain_dB < -30) {
  return(amp_x_100/3162);
  } else if (gain_dB>0)
  return(amp_x_100);
  else
  return(amp_x_100/gain_table[-gain_dB]);  // 245 corresponds to the factor sqrt(25/6)
  }
*/

unsigned int get_tx_amp(int power_dBm, int power_max_dBm, int N_RB_UL, int nb_rb)
{

  int gain_dB;
  double gain_lin;

  if (power_dBm<=power_max_dBm)
    gain_dB = power_dBm - power_max_dBm;
  else
    gain_dB = 0;

  gain_lin = pow(10,.1*gain_dB);
  AssertFatal((nb_rb >0) && (nb_rb <= N_RB_UL),"Illegal nb_rb/N_RB_UL combination (%d/%d)\n",nb_rb,N_RB_UL);
  return((int)(AMP*sqrt(gain_lin*N_RB_UL/(double)nb_rb)));
}

#endif

void dump_dlsch_ra(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t subframe)
{
  unsigned int coded_bits_per_codeword;
  uint8_t nsymb = ((ue->frame_parms.Ncp == 0) ? 14 : 12);

  coded_bits_per_codeword = get_G(&ue->frame_parms,
                                  ue->dlsch_ra[eNB_id]->harq_processes[0]->nb_rb,
                                  ue->dlsch_ra[eNB_id]->harq_processes[0]->rb_alloc_even,
                                  2,
                                  1,
                                  ue->pdcch_vars[0%RX_NB_TH][eNB_id]->num_pdcch_symbols,
                                  proc->frame_rx,
          subframe,
          0);
  LOG_D(PHY,"[UE %d] Dumping dlsch_ra : nb_rb %d, mcs %d, nb_rb %d, num_pdcch_symbols %d,G %d\n",
        ue->Mod_id,
        ue->dlsch_ra[eNB_id]->harq_processes[0]->nb_rb,
        ue->dlsch_ra[eNB_id]->harq_processes[0]->mcs,
        ue->dlsch_ra[eNB_id]->harq_processes[0]->nb_rb,
        ue->pdcch_vars[0%RX_NB_TH][eNB_id]->num_pdcch_symbols,
        coded_bits_per_codeword);

  LOG_M("rxsigF0.m","rxsF0", ue->common_vars.common_vars_rx_data_per_thread[ue->current_thread_id[subframe]].rxdataF[0],2*12*ue->frame_parms.ofdm_symbol_size,2,1);
  LOG_M("rxsigF0_ext.m","rxsF0_ext", ue->pdsch_vars_ra[0]->rxdataF_ext[0],2*12*ue->frame_parms.ofdm_symbol_size,1,1);
  LOG_M("dlsch00_ch0_ext.m","dl00_ch0_ext", ue->pdsch_vars_ra[0]->dl_ch_estimates_ext[0],300*nsymb,1,1);
  /*
    LOG_M("dlsch01_ch0_ext.m","dl01_ch0_ext",pdsch_vars[0]->dl_ch_estimates_ext[1],300*12,1,1);
    LOG_M("dlsch10_ch0_ext.m","dl10_ch0_ext",pdsch_vars[0]->dl_ch_estimates_ext[2],300*12,1,1);
    LOG_M("dlsch11_ch0_ext.m","dl11_ch0_ext",pdsch_vars[0]->dl_ch_estimates_ext[3],300*12,1,1);
    LOG_M("dlsch_rho.m","dl_rho",pdsch_vars[0]->rho[0],300*12,1,1);
  */
  LOG_M("dlsch_rxF_comp0.m","dlsch0_rxF_comp0", ue->pdsch_vars_ra[0]->rxdataF_comp0[0],300*nsymb,1,1);
  LOG_M("dlsch_rxF_llr.m","dlsch_llr", ue->pdsch_vars_ra[0]->llr[0],coded_bits_per_codeword,1,0);

  LOG_M("dlsch_mag1.m","dlschmag1",ue->pdsch_vars_ra[0]->dl_ch_mag0,300*nsymb,1,1);
  LOG_M("dlsch_mag2.m","dlschmag2",ue->pdsch_vars_ra[0]->dl_ch_magb0,300*nsymb,1,1);
}

void phy_reset_ue(module_id_t Mod_id,uint8_t CC_id,uint8_t eNB_index)
{

  // This flushes ALL DLSCH and ULSCH harq buffers of ALL connected eNBs...add the eNB_index later
  // for more flexibility

  uint8_t i,j,k,s;
  PHY_VARS_UE *ue = PHY_vars_UE_g[Mod_id][CC_id];

  //[NUMBER_OF_RX_THREAD=2][NUMBER_OF_CONNECTED_eNB_MAX][2];
  for(int l=0; l<RX_NB_TH; l++) {
      for(i=0; i<NUMBER_OF_CONNECTED_eNB_MAX; i++) {
          for(j=0; j<2; j++) {
              //DL HARQ
              if(ue->dlsch[l][i][j]) {
                  for(k=0; k<NUMBER_OF_HARQ_PID_MAX && ue->dlsch[l][i][j]->harq_processes[k]; k++) {
                      ue->dlsch[l][i][j]->harq_processes[k]->status = SCH_IDLE;
                      for (s=0; s<10; s++) {
                          // reset ACK/NACK bit to DTX for all subframes s = 0..9
                          ue->dlsch[l][i][j]->harq_ack[s].ack = 2;
                          ue->dlsch[l][i][j]->harq_ack[s].send_harq_status = 0;
                          ue->dlsch[l][i][j]->harq_ack[s].vDAI_UL = 0xff;
                          ue->dlsch[l][i][j]->harq_ack[s].vDAI_DL = 0xff;
                      }
                  }
              }
          }

          //UL HARQ
          if(ue->ulsch[i]) {
              for(k=0; k<NUMBER_OF_HARQ_PID_MAX && ue->ulsch[i]->harq_processes[k]; k++) {
                  ue->ulsch[i]->harq_processes[k]->status = SCH_IDLE;
                  //Set NDIs for all UL HARQs to 0
                  //  ue->ulsch[i]->harq_processes[k]->Ndi = 0;

              }
          }

          // flush Msg3 buffer
          ue->ulsch_Msg3_active[i] = 0;

      }
  }
}

void ra_failed(uint8_t Mod_id,uint8_t CC_id,uint8_t eNB_index)
{

  // if contention resolution fails, go back to PRACH
  PHY_vars_UE_g[Mod_id][CC_id]->UE_mode[eNB_index] = PRACH;
  PHY_vars_UE_g[Mod_id][CC_id]->pdcch_vars[0][eNB_index]->crnti_is_temporary = 0;
  PHY_vars_UE_g[Mod_id][CC_id]->pdcch_vars[0][eNB_index]->crnti = 0;
  PHY_vars_UE_g[Mod_id][CC_id]->pdcch_vars[1][eNB_index]->crnti_is_temporary = 0;
  PHY_vars_UE_g[Mod_id][CC_id]->pdcch_vars[1][eNB_index]->crnti = 0;
  LOG_E(PHY,"[UE %d] Random-access procedure fails, going back to PRACH, setting SIStatus = 0, discard temporary C-RNTI and State RRC_IDLE\n",Mod_id);
}

void ra_succeeded(uint8_t Mod_id,uint8_t CC_id,uint8_t eNB_index)
{

  int i;

  LOG_I(PHY,"[UE %d][RAPROC] Random-access procedure succeeded. Set C-RNTI = Temporary C-RNTI\n",Mod_id);

  PHY_vars_UE_g[Mod_id][CC_id]->pdcch_vars[0][eNB_index]->crnti_is_temporary = 0;
  PHY_vars_UE_g[Mod_id][CC_id]->pdcch_vars[1][eNB_index]->crnti_is_temporary = 0;
  PHY_vars_UE_g[Mod_id][CC_id]->ulsch_Msg3_active[eNB_index] = 0;
  PHY_vars_UE_g[Mod_id][CC_id]->UE_mode[eNB_index] = PUSCH;

  for (i=0; i<8; i++) {
    if (PHY_vars_UE_g[Mod_id][CC_id]->ulsch[eNB_index]->harq_processes[i]) {
      PHY_vars_UE_g[Mod_id][CC_id]->ulsch[eNB_index]->harq_processes[i]->status=SCH_IDLE;
      PHY_vars_UE_g[Mod_id][CC_id]->dlsch[0][eNB_index][0]->harq_processes[i]->round=0;
      PHY_vars_UE_g[Mod_id][CC_id]->dlsch[1][eNB_index][0]->harq_processes[i]->round=0;
      PHY_vars_UE_g[Mod_id][CC_id]->ulsch[eNB_index]->harq_processes[i]->subframe_scheduling_flag=0;
    }
  }


}

UE_MODE_t get_ue_mode(uint8_t Mod_id,uint8_t CC_id,uint8_t eNB_index)
{

  return(PHY_vars_UE_g[Mod_id][CC_id]->UE_mode[eNB_index]);

}
void process_timing_advance_rar(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint16_t timing_advance) {

  ue->timing_advance = timing_advance*4;


#ifdef DEBUG_PHY_PROC
  /* TODO: fix this log, what is 'HW timing advance'? */
  /*LOG_I(PHY,"[UE %d] AbsoluteSubFrame %d.%d, received (rar) timing_advance %d, HW timing advance %d\n",ue->Mod_id,proc->frame_rx, proc->subframe_rx, ue->timing_advance);*/
  LOG_I(PHY,"[UE %d] AbsoluteSubFrame %d.%d, received (rar) timing_advance %d\n",ue->Mod_id,proc->frame_rx, proc->subframe_rx, ue->timing_advance);
#endif

}

void process_timing_advance(module_id_t Mod_id,uint8_t CC_id,int16_t timing_advance)
{

  //  uint32_t frame = PHY_vars_UE_g[Mod_id]->frame;

  // timing advance has Q1.5 format
  timing_advance = timing_advance - 31;

  PHY_vars_UE_g[Mod_id][CC_id]->timing_advance = PHY_vars_UE_g[Mod_id][CC_id]->timing_advance+timing_advance*4; //this is for 25RB only!!!


  LOG_D(PHY,"[UE %d] Got timing advance %d from MAC, new value %d\n",Mod_id, timing_advance, PHY_vars_UE_g[Mod_id][CC_id]->timing_advance);


}

uint8_t is_SR_TXOp(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id)
{

  int subframe=proc->subframe_tx;

  LOG_D(PHY,"[UE %d][SR %x] Frame %d subframe %d Checking for SR TXOp (sr_ConfigIndex %d)\n",
        ue->Mod_id,ue->pdcch_vars[ue->current_thread_id[proc->subframe_rx]][eNB_id]->crnti,proc->frame_tx,subframe,
        ue->scheduling_request_config[eNB_id].sr_ConfigIndex);

  if (ue->scheduling_request_config[eNB_id].sr_ConfigIndex <= 4) {        // 5 ms SR period
    if ((subframe%5) == ue->scheduling_request_config[eNB_id].sr_ConfigIndex)
      return(1);
  } else if (ue->scheduling_request_config[eNB_id].sr_ConfigIndex <= 14) { // 10 ms SR period
    if (subframe==(ue->scheduling_request_config[eNB_id].sr_ConfigIndex-5))
      return(1);
  } else if (ue->scheduling_request_config[eNB_id].sr_ConfigIndex <= 34) { // 20 ms SR period
    if ((10*(proc->frame_tx&1)+subframe) == (ue->scheduling_request_config[eNB_id].sr_ConfigIndex-15))
      return(1);
  } else if (ue->scheduling_request_config[eNB_id].sr_ConfigIndex <= 74) { // 40 ms SR period
    if ((10*(proc->frame_tx&3)+subframe) == (ue->scheduling_request_config[eNB_id].sr_ConfigIndex-35))
      return(1);
  } else if (ue->scheduling_request_config[eNB_id].sr_ConfigIndex <= 154) { // 80 ms SR period
    if ((10*(proc->frame_tx&7)+subframe) == (ue->scheduling_request_config[eNB_id].sr_ConfigIndex-75))
      return(1);
  }

  return(0);
}

uint8_t is_cqi_TXOp(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id)
{
  int subframe = proc->subframe_tx;
  int frame    = proc->frame_tx;
  CQI_REPORTPERIODIC *cqirep = &ue->cqi_report_config[eNB_id].CQI_ReportPeriodic;

  //LOG_I(PHY,"[UE %d][CRNTI %x] AbsSubFrame %d.%d Checking for CQI TXOp (cqi_ConfigIndex %d) isCQIOp %d\n",
  //      ue->Mod_id,ue->pdcch_vars[eNB_id]->crnti,frame,subframe,
  //      cqirep->cqi_PMI_ConfigIndex,
  //      (((10*frame + subframe) % cqirep->Npd) == cqirep->N_OFFSET_CQI));

  if (cqirep->cqi_PMI_ConfigIndex==-1)
    return(0);
  else if (((10*frame + subframe) % cqirep->Npd) == cqirep->N_OFFSET_CQI)
    return(1);
  else
    return(0);
}
uint8_t is_ri_TXOp(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id)
{


  int subframe = proc->subframe_tx;
  int frame    = proc->frame_tx;
  CQI_REPORTPERIODIC *cqirep = &ue->cqi_report_config[eNB_id].CQI_ReportPeriodic;
  int log2Mri = cqirep->ri_ConfigIndex/161;
  int N_OFFSET_RI = cqirep->ri_ConfigIndex % 161;

  //LOG_I(PHY,"[UE %d][CRNTI %x] AbsSubFrame %d.%d Checking for RI TXOp (ri_ConfigIndex %d) isRIOp %d\n",
  //      ue->Mod_id,ue->pdcch_vars[eNB_id]->crnti,frame,subframe,
  //      cqirep->ri_ConfigIndex,
  //      (((10*frame + subframe + cqirep->N_OFFSET_CQI - N_OFFSET_RI) % (cqirep->Npd<<log2Mri)) == 0));
  if (cqirep->ri_ConfigIndex==-1)
    return(0);
  else if (((10*frame + subframe + cqirep->N_OFFSET_CQI - N_OFFSET_RI) % (cqirep->Npd<<log2Mri)) == 0)
    return(1);
  else
    return(0);
}

void compute_cqi_ri_resources(PHY_VARS_UE *ue,
                              LTE_UE_ULSCH_t *ulsch,
                              uint8_t eNB_id,
                              uint16_t rnti,
                              uint16_t p_rnti,
                              uint16_t cba_rnti,
                              uint8_t cqi_status,
                              uint8_t ri_status)
{
    //PHY_MEASUREMENTS *meas = &ue->measurements;
    //uint8_t transmission_mode = ue->transmission_mode[eNB_id];


    //LOG_I(PHY,"compute_cqi_ri_resources O_RI %d O %d uci format %d \n",ulsch->O_RI,ulsch->O,ulsch->uci_format);
    if (cqi_status == 1 || ri_status == 1)
    {
        ulsch->O = 4;
    }
}

void ue_compute_srs_occasion(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t isSubframeSRS)
{

  LTE_DL_FRAME_PARMS *frame_parms = &ue->frame_parms;
  int frame_tx    = proc->frame_tx;
  int subframe_tx = proc->subframe_tx;
  SOUNDINGRS_UL_CONFIG_DEDICATED *pSoundingrs_ul_config_dedicated=&ue->soundingrs_ul_config_dedicated[eNB_id];
  uint16_t srsPeriodicity;
  uint16_t srsOffset;
  uint8_t is_pucch2_subframe = 0;
  uint8_t is_sr_an_subframe  = 0;

  // check for SRS opportunity
  pSoundingrs_ul_config_dedicated->srsUeSubframe   = 0;
  pSoundingrs_ul_config_dedicated->srsCellSubframe = isSubframeSRS;

  if (isSubframeSRS) {
    LOG_D(PHY," SrsDedicatedSetup: %d \n",pSoundingrs_ul_config_dedicated->srsConfigDedicatedSetup);
      if(pSoundingrs_ul_config_dedicated->srsConfigDedicatedSetup)
      {
          compute_srs_pos(frame_parms->frame_type, pSoundingrs_ul_config_dedicated->srs_ConfigIndex, &srsPeriodicity, &srsOffset);

          LOG_D(PHY," srsPeriodicity: %d srsOffset: %d isSubframeSRS %d \n",srsPeriodicity,srsOffset,isSubframeSRS);

          // transmit SRS if the four following constraints are respected:
          // - UE is configured to transmit SRS
          // - SRS are configured in current subframe
          // - UE is configured to send SRS in this subframe

          // 36.213 8.2
          // 1- A UE shall not transmit SRS whenever SRS and PUCCH format 2/2a/2b transmissions happen to coincide in the same subframe
          // 2- A UE shall not transmit SRS whenever SRS transmit
          //    on and PUCCH transmission carrying ACK/NACK and/or
          //    positive SR happen to coincide in the same subframe if the parameter
          //    Simultaneous-AN-and-SRS is FALSE

          // check PUCCH format 2/2a/2b transmissions
          is_pucch2_subframe = is_cqi_TXOp(ue,proc,eNB_id) && (ue->cqi_report_config[eNB_id].CQI_ReportPeriodic.cqi_PMI_ConfigIndex>0);
          is_pucch2_subframe = (is_ri_TXOp(ue,proc,eNB_id) && (ue->cqi_report_config[eNB_id].CQI_ReportPeriodic.ri_ConfigIndex>0)) || is_pucch2_subframe;

          // check ACK/SR transmission
          if(frame_parms->soundingrs_ul_config_common.ackNackSRS_SimultaneousTransmission == FALSE)
          {
              if(is_SR_TXOp(ue,proc,eNB_id))
              {
                  uint32_t SR_payload = 0;
                  if (ue->mac_enabled==1)
                  {
                      int Mod_id = ue->Mod_id;
                      int CC_id = ue->CC_id;
                      SR_payload = ue_get_SR(Mod_id,
					     CC_id,
					     frame_tx,
					     eNB_id,
					     ue->pdcch_vars[ue->current_thread_id[proc->subframe_rx]][eNB_id]->crnti,
					     subframe_tx); // subframe used for meas gap

                      if (SR_payload > 0)
                          is_sr_an_subframe = 1;
                  }
              }

              uint8_t pucch_ack_payload[2];
              if (get_ack(&ue->frame_parms,
                      ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->harq_ack,
                      subframe_tx,proc->subframe_rx,pucch_ack_payload,0) > 0)
              {
                  is_sr_an_subframe = 1;
              }
          }

          // check SRS UE opportunity
          if( isSubframeSRS  &&
                  (((10*frame_tx+subframe_tx) % srsPeriodicity) == srsOffset)
          )
          {
              if ((is_pucch2_subframe == 0) && (is_sr_an_subframe == 0))
              {
                  pSoundingrs_ul_config_dedicated->srsUeSubframe = 1;
                  ue->ulsch[eNB_id]->srs_active   = 1;
                  ue->ulsch[eNB_id]->Nsymb_pusch  = 12-(frame_parms->Ncp<<1)- ue->ulsch[eNB_id]->srs_active;
              }
              else
              {
                  LOG_I(PHY,"DROP UE-SRS-TX for this subframe %d.%d: collision with PUCCH2 or SR/AN: PUCCH2-occasion: %d, SR-AN-occasion[simSRS-SR-AN %d]: %d  \n", frame_tx, subframe_tx, is_pucch2_subframe, frame_parms->soundingrs_ul_config_common.ackNackSRS_SimultaneousTransmission, is_sr_an_subframe);
              }
          }
      }
      LOG_D(PHY," srsCellSubframe: %d, srsUeSubframe: %d, Nsymb-pusch: %d \n", pSoundingrs_ul_config_dedicated->srsCellSubframe, pSoundingrs_ul_config_dedicated->srsUeSubframe, ue->ulsch[eNB_id]->Nsymb_pusch);
  }
}


void get_cqipmiri_params(PHY_VARS_UE *ue,uint8_t eNB_id)
{

  CQI_REPORTPERIODIC *cqirep = &ue->cqi_report_config[eNB_id].CQI_ReportPeriodic;
  int cqi_PMI_ConfigIndex = cqirep->cqi_PMI_ConfigIndex;

  if (ue->frame_parms.frame_type == FDD) {
    if (cqi_PMI_ConfigIndex <= 1) {        // 2 ms CQI_PMI period
      cqirep->Npd = 2;
      cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex;
    } else if (cqi_PMI_ConfigIndex <= 6) { // 5 ms CQI_PMI period
      cqirep->Npd = 5;
      cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-2;
    } else if (cqi_PMI_ConfigIndex <=16) { // 10ms CQI_PMI period
      cqirep->Npd = 10;
      cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-7;
    } else if (cqi_PMI_ConfigIndex <= 36) { // 20 ms CQI_PMI period
      cqirep->Npd = 20;
      cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-17;
    } else if (cqi_PMI_ConfigIndex <= 76) { // 40 ms CQI_PMI period
      cqirep->Npd = 40;
      cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-37;
    } else if (cqi_PMI_ConfigIndex <= 156) { // 80 ms CQI_PMI period
      cqirep->Npd = 80;
      cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-77;
    } else if (cqi_PMI_ConfigIndex <= 316) { // 160 ms CQI_PMI period
      cqirep->Npd = 160;
      cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-157;
    }
    else if (cqi_PMI_ConfigIndex > 317) {

      if (cqi_PMI_ConfigIndex <= 349) { // 32 ms CQI_PMI period
  cqirep->Npd = 32;
      cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-318;
      }
      else if (cqi_PMI_ConfigIndex <= 413) { // 64 ms CQI_PMI period
  cqirep->Npd = 64;
  cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-350;
      }
      else if (cqi_PMI_ConfigIndex <= 541) { // 128 ms CQI_PMI period
  cqirep->Npd = 128;
  cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-414;
      }
    }
  }
  else { // TDD
   if (cqi_PMI_ConfigIndex == 0) {        // all UL subframes
     cqirep->Npd = 1;
     cqirep->N_OFFSET_CQI = 0;
   } else if (cqi_PMI_ConfigIndex <= 6) { // 5 ms CQI_PMI period
     cqirep->Npd = 5;
     cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-1;
   } else if (cqi_PMI_ConfigIndex <=16) { // 10ms CQI_PMI period
     cqirep->Npd = 10;
     cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-6;
   } else if (cqi_PMI_ConfigIndex <= 36) { // 20 ms CQI_PMI period
     cqirep->Npd = 20;
     cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-16;
   } else if (cqi_PMI_ConfigIndex <= 76) { // 40 ms CQI_PMI period
     cqirep->Npd = 40;
     cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-36;
   } else if (cqi_PMI_ConfigIndex <= 156) { // 80 ms CQI_PMI period
     cqirep->Npd = 80;
     cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-76;
   } else if (cqi_PMI_ConfigIndex <= 316) { // 160 ms CQI_PMI period
     cqirep->Npd = 160;
     cqirep->N_OFFSET_CQI = cqi_PMI_ConfigIndex-156;
   }
  }
}

PUCCH_FMT_t get_pucch_format(lte_frame_type_t frame_type,
                             lte_prefix_type_t cyclic_prefix_type,
                             uint8_t SR_payload,
                             uint8_t nb_cw,
                             uint8_t cqi_status,
                             uint8_t ri_status,
                             uint8_t bundling_flag)
{
  if((cqi_status == 0) && (ri_status==0))
  {
      // PUCCH Format 1 1a 1b
      // 1- SR only ==> PUCCH format 1
      // 2- 1bit Ack/Nack with/without SR  ==> PUCCH format 1a
      // 3- 2bits Ack/Nack with/without SR ==> PUCCH format 1b
      if((nb_cw == 1)&&(bundling_flag==bundling))
      {
          return pucch_format1a;
      }
      if((nb_cw == 1)&&(bundling_flag==multiplexing))
      {
          return pucch_format1b;
      }
      if(nb_cw == 2)
      {
          return pucch_format1b;
      }
      if(SR_payload == 1)
      {
          return pucch_format1;
          /*
          if (frame_type == FDD) {
              return pucch_format1;
          } else if (frame_type == TDD) {
              return pucch_format1b;
          } else {
              AssertFatal(1==0,"Unknown frame_type");
          }*/
      }
  }
  else
  {
      // PUCCH Format 2 2a 2b
      // 1- CQI only or RI only  ==> PUCCH format 2
      // 2- CQI or RI + 1bit Ack/Nack for normal CP  ==> PUCCH format 2a
      // 3- CQI or RI + 2bits Ack/Nack for normal CP ==> PUCCH format 2b
      // 4- CQI or RI + Ack/Nack for extended CP ==> PUCCH format 2
      if(nb_cw == 0)
      {
          return pucch_format2;
      }
      if(cyclic_prefix_type == NORMAL)
      {
          if(nb_cw == 1)
          {
              return pucch_format2a;
          }
          if(nb_cw == 2)
          {
              return pucch_format2b;
          }
      }
      else
      {
          return pucch_format2;
      }
  }
  return pucch_format1a;
}
uint16_t get_n1_pucch(PHY_VARS_UE *ue,
          UE_rxtx_proc_t *proc,
                      harq_status_t *harq_ack,
                      uint8_t eNB_id,
                      uint8_t *b,
                      uint8_t SR)
{

  LTE_DL_FRAME_PARMS *frame_parms=&ue->frame_parms;
  uint8_t nCCE0,nCCE1,nCCE2,nCCE3,harq_ack1,harq_ack0,harq_ack3,harq_ack2;
  ANFBmode_t bundling_flag;
  uint16_t n1_pucch0=0,n1_pucch1=0,n1_pucch2=0,n1_pucch3=0,n1_pucch_inter;
  static uint8_t candidate_dl[9]; // which downlink(s) the current ACK/NACK is associating to
  uint8_t last_dl=0xff; // the last downlink with valid DL-DCI. for calculating the PUCCH resource index
  int sf;
  int M;
  uint8_t ack_counter=0;
  // clear this, important for case where n1_pucch selection is not used
  int subframe=proc->subframe_tx;

  ue->pucch_sel[subframe] = 0;

  if (frame_parms->frame_type == FDD ) { // FDD
    sf = (subframe<4)? subframe+6 : subframe-4;
    LOG_D(PHY,"n1_pucch_UE: subframe %d, nCCE %d\n",sf,ue->pdcch_vars[ue->current_thread_id[proc->subframe_rx]][eNB_id]->nCCE[sf]);

    if (SR == 0)
      return(frame_parms->pucch_config_common.n1PUCCH_AN + ue->pdcch_vars[ue->current_thread_id[proc->subframe_rx]][eNB_id]->nCCE[sf]);
    else
      return(ue->scheduling_request_config[eNB_id].sr_PUCCH_ResourceIndex);
  } else {

    bundling_flag = ue->pucch_config_dedicated[eNB_id].tdd_AckNackFeedbackMode;
#ifdef DEBUG_PHY_PROC

    if (bundling_flag==bundling) {
      LOG_D(PHY,"[UE%d] Frame %d subframe %d : get_n1_pucch, bundling, SR %d/%d\n",ue->Mod_id,proc->frame_tx,subframe,SR,
            ue->scheduling_request_config[eNB_id].sr_PUCCH_ResourceIndex);
    } else {
      LOG_D(PHY,"[UE%d] Frame %d subframe %d : get_n1_pucch, multiplexing, SR %d/%d\n",ue->Mod_id,proc->frame_tx,subframe,SR,
            ue->scheduling_request_config[eNB_id].sr_PUCCH_ResourceIndex);
    }

#endif

    switch (frame_parms->tdd_config) {
    case 1:  // DL:S:UL:UL:DL:DL:S:UL:UL:DL

      harq_ack0 = 2; // DTX
      M=1;

      // This is the offset for a particular subframe (2,3,4) => (0,2,4)
      if (subframe == 2) {  // ACK subframes 5,6
        candidate_dl[0] = 6;
        candidate_dl[1] = 5;
        M=2;
      } else if (subframe == 3) { // ACK subframe 9
        candidate_dl[0] = 9;
      } else if (subframe == 7) { // ACK subframes 0,1
        candidate_dl[0] = 1;
        candidate_dl[1] = 0;
        M=2;
      } else if (subframe == 8) { // ACK subframes 4
        candidate_dl[0] = 4;
      } else {
        LOG_E(PHY,"[UE%d] : Frame %d phy_procedures_lte.c: get_n1pucch, illegal tx-subframe %d for tdd_config %d\n",
              ue->Mod_id,proc->frame_tx,subframe,frame_parms->tdd_config);
        return(0);
      }

      // checking which downlink candidate is the last downlink with valid DL-DCI
      int k;
      for (k=0;k<M;k++) {
        if (harq_ack[candidate_dl[k]].send_harq_status>0) {
          last_dl = candidate_dl[k];
          break;
        }
      }
      if (last_dl >= 10) {
        LOG_E(PHY,"[UE%d] : Frame %d phy_procedures_lte.c: get_n1pucch, illegal rx-subframe %d (tx-subframe %d) for tdd_config %d\n",
              ue->Mod_id,proc->frame_tx,last_dl,subframe,frame_parms->tdd_config);
        return (0);
      }

      LOG_D(PHY,"SFN/SF %d/%d calculating n1_pucch0 from last_dl=%d\n",
          proc->frame_tx%1024,
          proc->subframe_tx,
          last_dl);

      // i=0
      nCCE0 = ue->pdcch_vars[ue->current_thread_id[proc->subframe_rx]][eNB_id]->nCCE[last_dl];
      n1_pucch0 = get_Np(frame_parms->N_RB_DL,nCCE0,0) + nCCE0+ frame_parms->pucch_config_common.n1PUCCH_AN;

      harq_ack0 = b[0];

      if (harq_ack0!=2) {  // DTX
        if (frame_parms->frame_type == FDD ) {
          if (SR == 0) {  // last paragraph pg 68 from 36.213 (v8.6), m=0
            b[0]=(M==2) ? 1-harq_ack0 : harq_ack0;
            b[1]=harq_ack0;   // in case we use pucch format 1b (subframes 2,7)
          ue->pucch_sel[subframe] = 0;
            return(n1_pucch0);
          } else { // SR and only 0 or 1 ACKs (first 2 entries in Table 7.3-1 of 36.213)
            b[0]=harq_ack0;
          return(ue->scheduling_request_config[eNB_id].sr_PUCCH_ResourceIndex);
          }
        } else {
          if (SR == 0) {
            b[0] = harq_ack0;
            b[1] = harq_ack0;
            ue->pucch_sel[subframe] = 0;
            return(n1_pucch0);
          } else {
            b[0] = harq_ack0;
            b[1] = harq_ack0;
            return(ue->scheduling_request_config[eNB_id].sr_PUCCH_ResourceIndex);
          }
        }
      }


      break;

    case 3:  // DL:S:UL:UL:UL:DL:DL:DL:DL:DL
      // in this configuration we have M=2 from pg 68 of 36.213 (v8.6)
      // Note: this doesn't allow using subframe 1 for PDSCH transmission!!! (i.e. SF 1 cannot be acked in SF 2)
      // set ACK/NAKs to DTX
      harq_ack1 = 2; // DTX
      harq_ack0 = 2; // DTX
      // This is the offset for a particular subframe (2,3,4) => (0,2,4)
      last_dl = (subframe-2)<<1;
      // i=0
      nCCE0 = ue->pdcch_vars[ue->current_thread_id[proc->subframe_rx]][eNB_id]->nCCE[5+last_dl];
      n1_pucch0 = get_Np(frame_parms->N_RB_DL,nCCE0,0) + nCCE0+ frame_parms->pucch_config_common.n1PUCCH_AN;
      // i=1
      nCCE1 = ue->pdcch_vars[ue->current_thread_id[proc->subframe_rx]][eNB_id]->nCCE[(6+last_dl)%10];
      n1_pucch1 = get_Np(frame_parms->N_RB_DL,nCCE1,1) + nCCE1 + frame_parms->pucch_config_common.n1PUCCH_AN;

      // set ACK/NAK to values if not DTX
      if (ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->harq_ack[(6+last_dl)%10].send_harq_status>0)  // n-6 // subframe 6 is to be ACK/NAKed
        harq_ack1 = ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->harq_ack[(6+last_dl)%10].ack;

      if (ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->harq_ack[5+last_dl].send_harq_status>0)  // n-6 // subframe 5 is to be ACK/NAKed
        harq_ack0 = ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->harq_ack[5+last_dl].ack;

      LOG_D(PHY,"SFN/SF %d/%d calculating n1_pucch cce0=%d n1_pucch0=%d cce1=%d n1_pucch1=%d\n",
                                      proc->frame_tx%1024,
                                      proc->subframe_tx,
                                      nCCE0,n1_pucch0,
                                      nCCE1,n1_pucch1);

      if (harq_ack1!=2) { // n-6 // subframe 6,8,0 and maybe 5,7,9 is to be ACK/NAKed

        if ((bundling_flag==bundling)&&(SR == 0)) {  // This is for bundling without SR,
          // n1_pucch index takes value of smallest element in set {0,1}
          // i.e. 0 if harq_ack0 is not DTX, otherwise 1
          b[0] = harq_ack1;

          if (harq_ack0!=2)
            b[0]=b[0]&harq_ack0;

          ue->pucch_sel[subframe] = 1;
          return(n1_pucch1);

        } else if ((bundling_flag==multiplexing)&&(SR==0)) { // Table 10.1
          if (harq_ack0 == 2)
            harq_ack0 = 0;

          b[1] = harq_ack0;
          b[0] = (harq_ack0!=harq_ack1)?0:1;

          if ((harq_ack0 == 1) && (harq_ack1 == 0)) {
            ue->pucch_sel[subframe] = 0;
            return(n1_pucch0);
          } else {
            ue->pucch_sel[subframe] = 1;
            return(n1_pucch1);
          }
        } else if (SR==1) { // SR and 0,1,or 2 ACKS, (first 3 entries in Table 7.3-1 of 36.213)
          // this should be number of ACKs (including
          if (harq_ack0 == 2)
            harq_ack0 = 0;

          b[0]= harq_ack1 | harq_ack0;
          b[1]= harq_ack1 ^ harq_ack0;
          return(ue->scheduling_request_config[eNB_id].sr_PUCCH_ResourceIndex);
        }
      } else if (harq_ack0!=2) { // n-7  // subframe 5,7,9 only is to be ACK/NAKed
        if ((bundling_flag==bundling)&&(SR == 0)) {  // last paragraph pg 68 from 36.213 (v8.6), m=0
          b[0]=harq_ack0;
          ue->pucch_sel[subframe] = 0;
          return(n1_pucch0);
        } else if ((bundling_flag==multiplexing)&&(SR==0)) { // Table 10.1 with i=1 set to DTX
          b[0] = harq_ack0;
          b[1] = 1-b[0];
          ue->pucch_sel[subframe] = 0;
          return(n1_pucch0);
        } else if (SR==1) { // SR and only 0 or 1 ACKs (first 2 entries in Table 7.3-1 of 36.213)
          b[0]=harq_ack0;
          b[1]=b[0];
          return(ue->scheduling_request_config[eNB_id].sr_PUCCH_ResourceIndex);
        }
      }

      break;

    case 4:  // DL:S:UL:UL:DL:DL:DL:DL:DL:DL
          // in this configuration we have M=4 from pg 68 of 36.213 (v8.6)
          // Note: this doesn't allow using subframe 1 for PDSCH transmission!!! (i.e. SF 1 cannot be acked in SF 2)
          // set ACK/NAKs to DTX
          harq_ack3 = 2; // DTX
          harq_ack2 = 2; // DTX
          harq_ack1 = 2; // DTX
          harq_ack0 = 2; // DTX
          // This is the offset for a particular subframe (2,3,4) => (0,2,4)
          //last_dl = (subframe-2)<<1;
          if (subframe == 2) {
          // i=0
          //nCCE0 = ue->pdcch_vars[ue->current_thread_id[proc->subframe_rx]][eNB_id]->nCCE[2+subframe];
          nCCE0 = ue->pdcch_vars[ue->current_thread_id[proc->subframe_rx]][eNB_id]->nCCE[(8+subframe)%10];
          n1_pucch0 = 2*get_Np(frame_parms->N_RB_DL,nCCE0,0) + nCCE0+ frame_parms->pucch_config_common.n1PUCCH_AN;
          // i=1
          nCCE1 = ue->pdcch_vars[ue->current_thread_id[proc->subframe_rx]][eNB_id]->nCCE[2+subframe];
          n1_pucch1 = get_Np(frame_parms->N_RB_DL,nCCE1,0) + get_Np(frame_parms->N_RB_DL,nCCE1,1) + nCCE1 + frame_parms->pucch_config_common.n1PUCCH_AN;
          // i=2
          nCCE2 = ue->pdcch_vars[ue->current_thread_id[proc->subframe_rx]][eNB_id]->nCCE[(8+subframe)%10];

          n1_pucch2 = 2*get_Np(frame_parms->N_RB_DL,nCCE2,1) + nCCE2+ frame_parms->pucch_config_common.n1PUCCH_AN;
          // i=3
          //nCCE3 = ue->pdcch_vars[ue->current_thread_id[proc->subframe_rx]][eNB_id]->nCCE[(9+subframe)%10];
          //n1_pucch3 = get_Np(frame_parms->N_RB_DL,nCCE3,1) + nCCE3 + frame_parms->pucch_config_common.n1PUCCH_AN;

          // set ACK/NAK to values if not DTX
          if (ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->harq_ack[(8+subframe)%10].send_harq_status>0)  // n-6 // subframe 6 is to be ACK/NAKed
            harq_ack0 = ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->harq_ack[(8+subframe)%10].ack;

          if (ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->harq_ack[2+subframe].send_harq_status>0)  // n-6 // subframe 5 is to be ACK/NAKed
            harq_ack1 = ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->harq_ack[2+subframe].ack;

          if (ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->harq_ack[3+subframe].send_harq_status>0)  // n-6 // subframe 6 is to be ACK/NAKed
            harq_ack2 = ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->harq_ack[3+subframe].ack;

          //if (ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->harq_ack[(9+subframe)%10].send_harq_status>0)  // n-6 // subframe 5 is to be ACK/NAKed
            //harq_ack3 = ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->harq_ack[(9+subframe)%10].ack;