Commit 6505a3d4 authored by gauthier's avatar gauthier

For Centos MME

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5319 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent f4ab618a
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Channel parameters:
// Default Paging DRX of the eNB as defined in TS 36.304
default_paging_drx = "PAGING_DRX_256";
////////// Physical parameters:
frame_type = "FDD";
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.13.11";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24";
};
}
);
#!/bin/bash
################################################################################
# Eurecom OpenAirInterface core network
# Copyright(c) 1999 - 2014 Eurecom
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
# version 2, as published by the Free Software Foundation.
#
# This program is distributed in the hope it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License along with
# this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
#
# The full GNU General Public License is included in this distribution in
# the file called "COPYING".
#
# Contact Information
# Openair Admin: openair_admin@eurecom.fr
# Openair Tech : openair_tech@eurecom.fr
# Forums : http://forums.eurecom.fsr/openairinterface
# Address : EURECOM,
# Campus SophiaTech,
# 450 Route des Chappes,
# CS 50193
# 06904 Biot Sophia Antipolis cedex,
# FRANCE
################################################################################
# file start_enb.bash
# brief
# author Lionel Gauthier
# company Eurecom
# email: lionel.gauthier@eurecom.fr
###########################################
# NO INPUT PARAMETER FOR THIS SCRIPT
#########################################
# This script start a ENB
# The MME is provided to EURECOM by external partner, and should be started by your own.
###########################################################
# Parameters
###########################################################
declare MAKE_LTE_ACCESS_STRATUM_TARGET_RT="lte-softmodem HARD_RT=1 ENABLE_ITTI=1 USE_MME=R10 LINK_PDCP_TO_GTPV1U=1 DISABLE_XER_PRINT=1 SECU=1 RRC_MSG_PRINT=1 "
###########################################################
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
source $THIS_SCRIPT_PATH/utils.bash
###########################################################
declare -x CONFIG_FILE_DIR=./CONF
cd $THIS_SCRIPT_PATH
#######################################################
# FIND CONFIG FILE
#######################################################
SEARCHED_CONFIG_FILE_ENB="enb*.conf"
CONFIG_FILE_ENB=$THIS_SCRIPT_PATH/`find $CONFIG_FILE_DIR -iname $SEARCHED_CONFIG_FILE_ENB`
if [ -f $CONFIG_FILE_ENB ]; then
echo_warning "eNB config file found is now $CONFIG_FILE_ENB"
else
echo_error "eNB config file not found, exiting"
exit 1
fi
#######################################################
# SOURCE CONFIG FILE
#######################################################
rm -f /tmp/source.txt
VARIABLES="
ENB_INTERFACE_NAME_FOR_S1_MME\|\
ENB_IPV4_ADDRESS_FOR_S1_MME\|\
ENB_INTERFACE_NAME_FOR_S1U\|\
ENB_IPV4_ADDRESS_FOR_S1U\|\
hard_real_time"
VARIABLES=$(echo $VARIABLES | sed -e 's/\\r//g')
VARIABLES=$(echo $VARIABLES | tr -d ' ')
cat $CONFIG_FILE_ENB | grep -w "$VARIABLES"| tr -d " " | tr -d ";" > /tmp/source.txt
source /tmp/source.txt
declare ENB_IPV4_NETMASK_FOR_S1_MME=$( echo $ENB_IPV4_ADDRESS_FOR_S1_MME | cut -f2 -d '/')
declare ENB_IPV4_NETMASK_FOR_S1U=$( echo $ENB_IPV4_ADDRESS_FOR_S1U | cut -f2 -d '/')
ENB_IPV4_ADDRESS_FOR_S1_MME=$( echo $ENB_IPV4_ADDRESS_FOR_S1_MME | cut -f1 -d '/')
ENB_IPV4_ADDRESS_FOR_S1U=$( echo $ENB_IPV4_ADDRESS_FOR_S1U | cut -f1 -d '/')
is_openvswitch_interface $ENB_INTERFACE_NAME_FOR_S1_MME \
$ENB_INTERFACE_NAME_FOR_S1U
if [ $? -eq 1 ]; then
echo_success "Found open-vswitch network configuration"
else
is_vlan_interface $ENB_INTERFACE_NAME_FOR_S1_MME \
$ENB_INTERFACE_NAME_FOR_S1U
if [ $? -eq 1 ]; then
echo_success "Found VLAN network configuration"
clean_enb_vlan_network
build_enb_vlan_network
test_enb_vlan_network
else
is_real_interface $ENB_INTERFACE_NAME_FOR_S1_MME \
$ENB_INTERFACE_NAME_FOR_S1U
if [ $? -eq 1 ]; then
echo_success "Found standart network configuration"
else
echo_error "Cannot find open-vswitch network configuration or VLAN network configuration or standard network configuration"
exit 1
fi
fi
fi
##################################################
# LAUNCH eNB
##################################################
pkill oaisim
pkill tshark
if [ -d $THIS_SCRIPT_PATH/OUTPUT ]; then
mkdir -m 777 -p $THIS_SCRIPT_PATH/OUTPUT
fi
ITTI_LOG_FILE=$THIS_SCRIPT_PATH/OUTPUT/itti_enb_rf.$HOSTNAME.log
rotate_log_file $ITTI_LOG_FILE
STDOUT_LOG_FILE=$THIS_SCRIPT_PATH/OUTPUT/stdout_enb_rf.$HOSTNAME.log
rotate_log_file $STDOUT_LOG_FILE
rotate_log_file $STDOUT_LOG_FILE.filtered
PCAP_LOG_FILE=$THIS_SCRIPT_PATH/OUTPUT/tshark_enb_rf.$HOSTNAME.pcap
rotate_log_file $PCAP_LOG_FILE
cd $THIS_SCRIPT_PATH
if [ x$ENB_INTERFACE_NAME_FOR_S1_MME == x$ENB_INTERFACE_NAME_FOR_S1U ]; then
nohup tshark -i $ENB_INTERFACE_NAME_FOR_S1_MME -w $PCAP_LOG_FILE &
else
nohup tshark -i $ENB_INTERFACE_NAME_FOR_S1_MME -i $ENB_INTERFACE_NAME_FOR_S1U -w $PCAP_LOG_FILE &
fi
echo_warning "HARD REAL TIME MODE"
PATH=$PATH:/usr/realtime/bin
#make --directory=$OPENAIR_TARGETS/RTAI/USER drivers || exit 1
# 2 lines below replace the line above
cd $OPENAIR_TARGETS/ARCH/EXMIMO/DRIVER/eurecom && make clean && make || exit 1
cd $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT && make clean && make || exit 1
cd $THIS_SCRIPT_PATH
make --directory=$OPENAIR_TARGETS/RTAI/USER $MAKE_LTE_ACCESS_STRATUM_TARGET_RT -j`grep -c ^processor /proc/cpuinfo ` || exit 1
if [ ! -f /tmp/init_rt_done.tmp ]; then
echo_warning "STARTING REAL TIME (RTAI)"
insmod /usr/realtime/modules/rtai_hal.ko > /dev/null 2>&1
insmod /usr/realtime/modules/rtai_sched.ko > /dev/null 2>&1
insmod /usr/realtime/modules/rtai_sem.ko > /dev/null 2>&1
insmod /usr/realtime/modules/rtai_fifos.ko > /dev/null 2>&1
insmod /usr/realtime/modules/rtai_mbx.ko > /dev/null 2>&1
echo "1" > /sys/bus/pci/rescan
touch /tmp/init_rt_done.tmp
chmod 666 /tmp/init_rt_done.tmp
else
echo_warning "REAL TIME FOUND STARTED (RTAI)"
fi
cd $OPENAIR_TARGETS/RTAI/USER
bash ./init_exmimo2.sh
echo_warning "STARTING SOFTMODEM..."
./lte-softmodem -K $ITTI_LOG_FILE -O $CONFIG_FILE_ENB 2>&1
#cat /dev/rtf62 > $STDOUT_LOG_FILE
cd $THIS_SCRIPT_PATH
pkill tshark
cat $STDOUT_LOG_FILE | grep -v '[PHY]' | grep -v '[MAC]' | grep -v '[EMU]' | \
grep -v '[OCM]' | grep -v '[OMG]' | \
grep -v 'RLC not configured' | grep -v 'check if serving becomes' | \
grep -v 'mac_rrc_data_req' | grep -v 'BCCH request =>' > $STDOUT_LOG_FILE.filtered
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment