Commit e56bae9f authored by Florian Kaltenberger's avatar Florian Kaltenberger

added TDD config option to lte-softmodem command line

parent 3e95dad6
......@@ -17,7 +17,7 @@ eNBs =
mobile_country_code = "208";
mobile_network_code = "92";
mobile_network_code = "93";
////////// Physical parameters:
......@@ -31,7 +31,7 @@ eNBs =
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 50;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
......@@ -131,7 +131,7 @@ eNBs =
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "10.0.1.1";
mme_ip_address = ( { ipv4 = "192.168.12.171";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -140,11 +140,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth3";
ENB_IPV4_ADDRESS_FOR_S1_MME = "10.0.1.229/24";
ENB_INTERFACE_NAME_FOR_S1_MME = "eth2";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.80/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth3";
ENB_IPV4_ADDRESS_FOR_S1U = "10.0.1.229/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth2";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.80/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......
......@@ -422,7 +422,7 @@ void help (void) {
printf(" --ue-txgain set UE TX gain\n");
printf(" --ue-scan_carrier set UE to scan around carrier\n");
printf(" --loop-memory get softmodem (UE) to loop through memory instead of acquiring from HW\n");
printf(" -C Set the downlink frequecny for all Component carrier\n");
printf(" -C Set the downlink frequency for all component carriers\n");
printf(" -d Enable soft scope and L1 and L2 stats (Xforms)\n");
printf(" -F Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n");
printf(" -g Set the global log level, valide options: (9:trace, 8/7:debug, 6:info, 4:warn, 3:error)\n");
......@@ -436,6 +436,7 @@ void help (void) {
printf(" -r Set the PRB, valid values: 6, 25, 50, 100 \n");
printf(" -S Skip the missed slots/subframes \n");
printf(" -t Set the maximum uplink MCS\n");
printf(" -T Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n");
printf(" -U Set the lte softmodem as a UE\n");
printf(" -W Enable L2 wireshark messages on localhost \n");
printf(" -V Enable VCD (generated file will be located atopenair_dump_eNB.vcd, read it with target/RT/USER/eNB.gtkw\n");
......@@ -2061,7 +2062,7 @@ static void get_options (int argc, char **argv)
{NULL, 0, NULL, 0}
};
while ((c = getopt_long (argc, argv, "C:dK:g:F:G:hqO:m:SUVRM:r:P:Ws:t:x:",long_options,NULL)) != -1) {
while ((c = getopt_long (argc, argv, "C:dK:g:F:G:hqO:m:SUVRM:r:P:Ws:t:Tx:",long_options,NULL)) != -1) {
switch (c) {
case LONG_OPTION_MAXPOWER:
tx_max_power[0]=atoi(optarg);
......@@ -2326,8 +2327,13 @@ static void get_options (int argc, char **argv)
printf("Transmission mode > 2 (%d) not supported for the moment\n",transmission_mode);
exit(-1);
}
break;
case 'T':
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++)
frame_parms[CC_id]->frame_type = TDD;
break;
case 'h':
help ();
exit (-1);
......@@ -2487,12 +2493,10 @@ int main( int argc, char **argv )
memset(tx_max_power,0,sizeof(int)*MAX_NUM_CCs);
set_latency_target();
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
frame_parms[CC_id] = (LTE_DL_FRAME_PARMS*) malloc(sizeof(LTE_DL_FRAME_PARMS));
/* Set some default values that may be overwritten while reading options */
frame_parms[CC_id]->frame_type = FDD; /* TDD */
frame_parms[CC_id]->frame_type = FDD;
frame_parms[CC_id]->tdd_config = 3;
frame_parms[CC_id]->tdd_config_S = 0;
frame_parms[CC_id]->N_RB_DL = 100;
......@@ -3088,7 +3092,7 @@ int main( int argc, char **argv )
for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
rf_map[CC_id].card=0;
rf_map[CC_id].chain=CC_id+1;
rf_map[CC_id].chain=CC_id;
}
// connect the TX/RX buffers
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment