Commit 5aef2c55 authored by Lev Walkin's avatar Lev Walkin
Browse files

Open Mobile Alliance UserPlane Location Protocol

parent 8a4a06c4
0.9.22: 2007-Jun-26
0.9.22: 2007-Jun-29
* Added -pdu=all and -pdu=<type> switches to asn1c.
* Added PER support for most known-multiplier string types:
......@@ -16,6 +16,7 @@
* Fixed extensibility handling of second SEQUENCE production.
(Severity: low; Security impact: none)
* Added DEFAULT handling for known multiplier string.
* Added a sample OMA ULP decoder (./examples/sample.source.ULP).
0.9.21: 2006-Sep-17
......
......@@ -15,11 +15,15 @@ This directory contains a few examples.
Lightweight Directory Access Protocol version 3 PDU as specified in
rfc4211.txt.
6. The ./sample.source.RRC directory contains the 3GPP Radio Resource Control
decoder. Just type `make` in there to compile.
5. The ./sample.source.TAP3 directory contains the GSM TAP3 decoder.
Before trying to compile, read the README file in that directory.
6. The ./sample.source.RRC directory contains the 3GPP Radio Resource Control
decoder. Just type `make` in there to compile.
6. The ./sample.source.ULP directory contains the Open Mobile Alliance
UserPlane Location Protocol decoder. Before trying to compile, read the
README file in that directory.
The clyx2asn1.pl script can be used to extract ASN.1 data from LyX editor files.
......
......@@ -39,9 +39,8 @@ if test ! -f Makefile.am.sample ; then
fi
EXTRA_CFLAGS="-DJUNKTEST"
if test -f config.h ; then
EXTRA_CFLAGS="-DHAVE_CONFIG_H ${EXTRA_CFLAGS}"
fi
test -f config.h && EXTRA_CFLAGS="-DHAVE_CONFIG_H ${EXTRA_CFLAGS}"
test -n "$TITLE" && EXTRA_CFLAGS="-DASN_CONVERTER_TITLE=\"$TITLE\" ${EXTRA_CFLAGS}"
set -x
cat Makefile.am.sample \
......@@ -58,6 +57,7 @@ set +x
echo " make"
echo
echo "regen-makefile:"
test -n "$TITLE" && echo " TITLE=\"$TITLE\" \\"
echo " ASN1CMDOPTS=\"${ASN1CMDOPTS}\" \\"
echo " ASN1MODULES=\"${ASN1MODULES}\" \\"
echo " ASN1PDU=${ASN1PDU} \\"
......
......@@ -154,6 +154,8 @@ ASN_MODULE_HEADERS+=per_decoder.h
ASN_MODULE_SOURCES+=per_decoder.c
ASN_MODULE_HEADERS+=per_encoder.h
ASN_MODULE_SOURCES+=per_encoder.c
ASN_MODULE_HEADERS+=per_opentype.h
ASN_MODULE_SOURCES+=per_opentype.c
ASN_CONVERTER_SOURCES+=converter-sample.c
......@@ -163,7 +165,7 @@ libsomething_la_SOURCES=$(ASN_MODULE_SOURCES) $(ASN_MODULE_HEADERS)
# This file may be used as an input for make(3)
# Remove the lines below to convert it into a pure .am file
TARGET = ldap3dump
CFLAGS += -DHAVE_CONFIG_H -DJUNKTEST -DPDU=LDAPMessage -I.
CFLAGS += -DASN_CONVERTER_TITLE="Lightweight Directory Access Protocol V3 decoder" -DHAVE_CONFIG_H -DJUNKTEST -DPDU=LDAPMessage -I.
OBJS=${ASN_MODULE_SOURCES:.c=.o} ${ASN_CONVERTER_SOURCES:.c=.o}
all: LDAPMessage.c $(TARGET)
......@@ -193,6 +195,7 @@ LDAPMessage.c: ../sample.makefile.regen ../rfc4511-Lightweight-Directory-Access-
make
regen-makefile:
TITLE="Lightweight Directory Access Protocol V3 decoder" \
ASN1CMDOPTS="-fcompound-names" \
ASN1MODULES="../rfc4511-Lightweight-Directory-Access-Protocol-V3.asn1" \
ASN1PDU=LDAPMessage \
......
......@@ -276,6 +276,8 @@ ASN_MODULE_HEADERS+=per_decoder.h
ASN_MODULE_SOURCES+=per_decoder.c
ASN_MODULE_HEADERS+=per_encoder.h
ASN_MODULE_SOURCES+=per_encoder.c
ASN_MODULE_HEADERS+=per_opentype.h
ASN_MODULE_SOURCES+=per_opentype.c
ASN_CONVERTER_SOURCES+=converter-sample.c
......@@ -332,12 +334,12 @@ check-ber:
for b in 1 17 33 980 8192; do \
echo "Recoding $$f into XER and back ($$b)..."; \
./${TARGET} -b $$b -iber -oxer $$f > ./.tmp.1.$$$$ || exit 2; \
./${TARGET} -b $$b -ixer -oxer ./.tmp.1.$$$$ > ./.tmp.2.$$$$ || exit 2; \
diff ./.tmp.1.$$$$ ./.tmp.2.$$$$ || exit 2; \
./${TARGET} -b $$b -ixer -oxer ./.tmp.1.$$$$ > ./.tmp.2.$$$$ || exit 3; \
diff ./.tmp.1.$$$$ ./.tmp.2.$$$$ || exit 4; \
rm -f ./.tmp.[12].$$$$; \
echo "Test junking $$f (please wait)..."; \
./${TARGET} -J0.0001 -n 1000 -b $$b -iber -onull $$f || exit 2; \
./${TARGET} -J0.001 -n 1000 -b $$b -iber -onull $$f || exit 2; \
./${TARGET} -J0.0001 -n 1000 -b $$b -iber -onull $$f || exit 5; \
./${TARGET} -J0.001 -n 1000 -b $$b -iber -onull $$f || exit 6; \
done; done; fi
check-xer:
......@@ -346,41 +348,41 @@ check-xer:
for b in 1 17 33 980 8192; do \
echo "Recoding $$f into DER and back ($$b)..."; \
./${TARGET} -b $$b -ixer -oder $$f > ./.tmp.1.$$$$ || exit 2; \
./${TARGET} -b $$b -iber -oxer ./.tmp.1.$$$$ > ./.tmp.2.$$$$ || exit 2; \
diff $$f ./.tmp.2.$$$$ || exit 2; \
./${TARGET} -b $$b -iber -oxer ./.tmp.1.$$$$ > ./.tmp.2.$$$$ || exit 3; \
diff $$f ./.tmp.2.$$$$ || exit 4; \
rm -f ./.tmp.[12].$$$$; \
echo "Test junking $$f (please wait)..."; \
./${TARGET} -J0.0001 -n 1000 -b $$b -ixer -onull $$f || exit 2; \
./${TARGET} -J0.001 -n 1000 -b $$b -ixer -onull $$f || exit 2; \
./${TARGET} -J0.0001 -n 1000 -b $$b -ixer -onull $$f || exit 5; \
./${TARGET} -J0.001 -n 1000 -b $$b -ixer -onull $$f || exit 6; \
done; done; fi
check-per:
@if test -f sample-MegacoMessage-1.per ; then \
for f in sample-MegacoMessage-[1-9].per; do \
@if test -f sample-MegacoMessage-1-nopad.per ; then \
for f in sample-MegacoMessage-[1-9]-nopad.per; do \
for b in 1 17 33 980 8192; do \
echo "Recoding $$f into DER into XER and back ($$b)..."; \
./${TARGET} -b $$b -iper -oder $$f > ./.tmp.1.$$$$ || exit 2; \
./${TARGET} -b $$b -iber -oxer ./.tmp.1.$$$$ > ./.tmp.2.$$$$ || exit 2; \
./${TARGET} -b $$b -ixer -oder ./.tmp.2.$$$$ > ./.tmp.3.$$$$ || exit 2; \
diff ./.tmp.1.$$$$ ./.tmp.3.$$$$ || exit 2; \
echo "Recoding non-padded $$f into DER into XER and back ($$b)..."; \
./${TARGET} -b $$b -per-nopad -iper -oder $$f > ./.tmp.1.$$$$ || exit 2; \
./${TARGET} -b $$b -iber -oxer ./.tmp.1.$$$$ > ./.tmp.2.$$$$ || exit 3; \
./${TARGET} -b $$b -ixer -oder ./.tmp.2.$$$$ > ./.tmp.3.$$$$ || exit 4; \
diff ./.tmp.1.$$$$ ./.tmp.3.$$$$ || exit 5; \
rm -f ./.tmp.[123].$$$$; \
echo "Test junking $$f (please wait)..."; \
./${TARGET} -J0.0001 -n 1000 -b $$b -iper -onull $$f || exit 2; \
./${TARGET} -J0.001 -n 1000 -b $$b -iper -onull $$f || exit 2; \
./${TARGET} -J0.0001 -n 1000 -b $$b -per-nopad -iper -onull $$f || exit 6; \
./${TARGET} -J0.001 -n 1000 -b $$b -per-nopad -iper -onull $$f || exit 7; \
done; done; fi
@if test -f sample-MegacoMessage-1-padded.per ; then \
for f in sample-*-[1-9]-padded.per; do \
@if test -f sample-MegacoMessage-1.per ; then \
for f in sample-*-[1-9].per; do \
pdu=`echo $$f | sed -E -e "s/sample-([A-Za-z-]+)-[0-9].*/\1/"`; \
for b in 1 17 33 980 8192; do \
echo "Recoding byte-padded $$f into DER into XER and back ($$b)..."; \
./${TARGET} -b $$b -per-padded -p $$pdu -iper -oder $$f > ./.tmp.1.$$$$ || exit 2; \
./${TARGET} -b $$b -p $$pdu -iber -oxer ./.tmp.1.$$$$ > ./.tmp.2.$$$$ || exit 2; \
./${TARGET} -b $$b -p $$pdu -ixer -oper ./.tmp.2.$$$$ > ./.tmp.1.$$$$ || exit 2; \
diff $$f ./.tmp.1.$$$$ || exit 2; \
echo "Recoding $$f into DER into XER and back ($$b)..."; \
./${TARGET} -b $$b -p $$pdu -iper -oder $$f > ./.tmp.1.$$$$ || exit 3; \
./${TARGET} -b $$b -p $$pdu -iber -oxer ./.tmp.1.$$$$ > ./.tmp.2.$$$$ || exit 4; \
./${TARGET} -b $$b -p $$pdu -ixer -oper ./.tmp.2.$$$$ > ./.tmp.1.$$$$ || exit 5; \
diff $$f ./.tmp.1.$$$$ || exit 6; \
rm -f ./.tmp.[12].$$$$; \
echo "Test junking $$f (please wait)..."; \
./${TARGET} -J0.0001 -n 1000 -b $$b -per-padded -iper -onull $$f || exit 2; \
./${TARGET} -J0.001 -n 1000 -b $$b -per-padded -iper -onull $$f || exit 2; \
./${TARGET} -J0.0001 -n 1000 -b $$b -iper -onull $$f || exit 7; \
./${TARGET} -J0.001 -n 1000 -b $$b -iper -onull $$f || exit 8; \
done; done; fi
distclean: clean
......
......@@ -336,6 +336,8 @@ ASN_MODULE_HEADERS+=per_decoder.h
ASN_MODULE_SOURCES+=per_decoder.c
ASN_MODULE_HEADERS+=per_encoder.h
ASN_MODULE_SOURCES+=per_encoder.c
ASN_MODULE_HEADERS+=per_opentype.h
ASN_MODULE_SOURCES+=per_opentype.c
ASN_CONVERTER_SOURCES+=converter-sample.c
......
......@@ -4730,6 +4730,8 @@ ASN_MODULE_HEADERS+=per_decoder.h
ASN_MODULE_SOURCES+=per_decoder.c
ASN_MODULE_HEADERS+=per_encoder.h
ASN_MODULE_SOURCES+=per_encoder.c
ASN_MODULE_HEADERS+=per_opentype.h
ASN_MODULE_SOURCES+=per_opentype.c
ASN_CONVERTER_SOURCES+=converter-sample.c
ASN_CONVERTER_SOURCES+=pdu_collection.c
......
......@@ -618,8 +618,6 @@ ASN_MODULE_HEADERS= \
ASN_MODULE_HEADERS+=INTEGER.h
ASN_MODULE_HEADERS+=NativeEnumerated.h
ASN_MODULE_HEADERS+=IA5String.h
ASN_MODULE_SOURCES+=IA5String.c
ASN_MODULE_SOURCES+=INTEGER.c
ASN_MODULE_SOURCES+=NativeEnumerated.c
ASN_MODULE_HEADERS+=NativeInteger.h
......@@ -670,6 +668,8 @@ ASN_MODULE_HEADERS+=per_decoder.h
ASN_MODULE_SOURCES+=per_decoder.c
ASN_MODULE_HEADERS+=per_encoder.h
ASN_MODULE_SOURCES+=per_encoder.c
ASN_MODULE_HEADERS+=per_opentype.h
ASN_MODULE_SOURCES+=per_opentype.c
ASN_CONVERTER_SOURCES+=converter-sample.c
......@@ -679,7 +679,7 @@ libsomething_la_SOURCES=$(ASN_MODULE_SOURCES) $(ASN_MODULE_HEADERS)
# This file may be used as an input for make(3)
# Remove the lines below to convert it into a pure .am file
TARGET = tap3dump
CFLAGS += -DHAVE_CONFIG_H -DJUNKTEST -DPDU=DataInterChange -I.
CFLAGS += -DASN_CONVERTER_TITLE="GSM TAP3 (Transferred Account Procedure, Version 3) decoder" -DHAVE_CONFIG_H -DJUNKTEST -DPDU=DataInterChange -I.
OBJS=${ASN_MODULE_SOURCES:.c=.o} ${ASN_CONVERTER_SOURCES:.c=.o}
all: DataInterChange.c $(TARGET)
......@@ -709,6 +709,7 @@ DataInterChange.c: ../sample.makefile.regen ../tap3.asn1
make
regen-makefile:
TITLE="GSM TAP3 (Transferred Account Procedure, Version 3) decoder" \
ASN1CMDOPTS="" \
ASN1MODULES="../tap3.asn1" \
ASN1PDU=DataInterChange \
......
ASN_MODULE_SOURCES= \
ULP-PDU.c \
UlpMessage.c \
SUPLINIT.c \
Notification.c \
NotificationType.c \
EncodingType.c \
FormatIndicator.c \
SLPMode.c \
MAC.c \
KeyIdentity.c \
SUPLSTART.c \
SETCapabilities.c \
PosTechnology.c \
PrefMethod.c \
PosProtocol.c \
SUPLRESPONSE.c \
SETAuthKey.c \
KeyIdentity4.c \
SUPLPOSINIT.c \
RequestedAssistData.c \
NavigationModel.c \
SatelliteInfo.c \
SatelliteInfoElement.c \
SUPLPOS.c \
PosPayLoad.c \
SUPLEND.c \
SUPLAUTHREQ.c \
SETNonce.c \
KeyIdentity2.c \
SUPLAUTHRESP.c \
SPCAuthKey.c \
KeyIdentity3.c \
Version.c \
SessionID.c \
SetSessionID.c \
SETId.c \
SlpSessionID.c \
IPAddress.c \
SLPAddress.c \
FQDN.c \
Ver.c \
LocationId.c \
Status.c \
CellInfo.c \
Position.c \
PositionEstimate.c \
AltitudeInfo.c \
CdmaCellInformation.c \
GsmCellInformation.c \
WcdmaCellInformation.c \
FrequencyInfo.c \
FrequencyInfoFDD.c \
FrequencyInfoTDD.c \
UARFCN.c \
NMR.c \
NMRelement.c \
MeasuredResultsList.c \
MeasuredResults.c \
CellMeasuredResultsList.c \
UTRA-CarrierRSSI.c \
CellMeasuredResults.c \
CellParametersID.c \
TGSN.c \
PrimaryCCPCH-RSCP.c \
TimeslotISCP.c \
TimeslotISCP-List.c \
PrimaryCPICH-Info.c \
CPICH-Ec-N0.c \
CPICH-RSCP.c \
Pathloss.c \
StatusCode.c \
QoP.c \
Velocity.c \
Horvel.c \
Horandvervel.c \
Horveluncert.c \
Horandveruncert.c \
PosMethod.c
ASN_MODULE_HEADERS= \
ULP-PDU.h \
UlpMessage.h \
SUPLINIT.h \
Notification.h \
NotificationType.h \
EncodingType.h \
FormatIndicator.h \
SLPMode.h \
MAC.h \
KeyIdentity.h \
SUPLSTART.h \
SETCapabilities.h \
PosTechnology.h \
PrefMethod.h \
PosProtocol.h \
SUPLRESPONSE.h \
SETAuthKey.h \
KeyIdentity4.h \
SUPLPOSINIT.h \
RequestedAssistData.h \
NavigationModel.h \
SatelliteInfo.h \
SatelliteInfoElement.h \
SUPLPOS.h \
PosPayLoad.h \
SUPLEND.h \
SUPLAUTHREQ.h \
SETNonce.h \
KeyIdentity2.h \
SUPLAUTHRESP.h \
SPCAuthKey.h \
KeyIdentity3.h \
Version.h \
SessionID.h \
SetSessionID.h \
SETId.h \
SlpSessionID.h \
IPAddress.h \
SLPAddress.h \
FQDN.h \
Ver.h \
LocationId.h \
Status.h \
CellInfo.h \
Position.h \
PositionEstimate.h \
AltitudeInfo.h \
CdmaCellInformation.h \
GsmCellInformation.h \
WcdmaCellInformation.h \
FrequencyInfo.h \
FrequencyInfoFDD.h \
FrequencyInfoTDD.h \
UARFCN.h \
NMR.h \
NMRelement.h \
MeasuredResultsList.h \
MeasuredResults.h \
CellMeasuredResultsList.h \
UTRA-CarrierRSSI.h \
CellMeasuredResults.h \
CellParametersID.h \
TGSN.h \
PrimaryCCPCH-RSCP.h \
TimeslotISCP.h \
TimeslotISCP-List.h \
PrimaryCPICH-Info.h \
CPICH-Ec-N0.h \
CPICH-RSCP.h \
Pathloss.h \
StatusCode.h \
QoP.h \
Velocity.h \
Horvel.h \
Horandvervel.h \
Horveluncert.h \
Horandveruncert.h \
PosMethod.h
ASN_MODULE_HEADERS+=BOOLEAN.h
ASN_MODULE_SOURCES+=BOOLEAN.c
ASN_MODULE_HEADERS+=ENUMERATED.h
ASN_MODULE_SOURCES+=ENUMERATED.c
ASN_MODULE_HEADERS+=INTEGER.h
ASN_MODULE_HEADERS+=NativeEnumerated.h
ASN_MODULE_HEADERS+=GeneralizedTime.h
ASN_MODULE_SOURCES+=GeneralizedTime.c
ASN_MODULE_HEADERS+=IA5String.h
ASN_MODULE_SOURCES+=IA5String.c
ASN_MODULE_SOURCES+=INTEGER.c
ASN_MODULE_SOURCES+=NativeEnumerated.c
ASN_MODULE_HEADERS+=NativeInteger.h
ASN_MODULE_SOURCES+=NativeInteger.c
ASN_MODULE_HEADERS+=UTCTime.h
ASN_MODULE_SOURCES+=UTCTime.c
ASN_MODULE_HEADERS+=VisibleString.h
ASN_MODULE_SOURCES+=VisibleString.c
ASN_MODULE_HEADERS+=asn_SEQUENCE_OF.h
ASN_MODULE_SOURCES+=asn_SEQUENCE_OF.c
ASN_MODULE_HEADERS+=asn_SET_OF.h
ASN_MODULE_SOURCES+=asn_SET_OF.c
ASN_MODULE_HEADERS+=constr_CHOICE.h
ASN_MODULE_SOURCES+=constr_CHOICE.c
ASN_MODULE_HEADERS+=constr_SEQUENCE.h
ASN_MODULE_SOURCES+=constr_SEQUENCE.c
ASN_MODULE_HEADERS+=constr_SEQUENCE_OF.h
ASN_MODULE_SOURCES+=constr_SEQUENCE_OF.c
ASN_MODULE_HEADERS+=constr_SET_OF.h
ASN_MODULE_SOURCES+=constr_SET_OF.c
ASN_MODULE_HEADERS+=asn_application.h
ASN_MODULE_HEADERS+=asn_system.h
ASN_MODULE_HEADERS+=asn_codecs.h
ASN_MODULE_HEADERS+=asn_internal.h
ASN_MODULE_HEADERS+=OCTET_STRING.h
ASN_MODULE_SOURCES+=OCTET_STRING.c
ASN_MODULE_HEADERS+=BIT_STRING.h
ASN_MODULE_SOURCES+=BIT_STRING.c
ASN_MODULE_SOURCES+=asn_codecs_prim.c
ASN_MODULE_HEADERS+=asn_codecs_prim.h
ASN_MODULE_HEADERS+=ber_tlv_length.h
ASN_MODULE_SOURCES+=ber_tlv_length.c
ASN_MODULE_HEADERS+=ber_tlv_tag.h
ASN_MODULE_SOURCES+=ber_tlv_tag.c
ASN_MODULE_HEADERS+=ber_decoder.h
ASN_MODULE_SOURCES+=ber_decoder.c
ASN_MODULE_HEADERS+=der_encoder.h
ASN_MODULE_SOURCES+=der_encoder.c
ASN_MODULE_HEADERS+=constr_TYPE.h
ASN_MODULE_SOURCES+=constr_TYPE.c
ASN_MODULE_HEADERS+=constraints.h
ASN_MODULE_SOURCES+=constraints.c
ASN_MODULE_HEADERS+=xer_support.h
ASN_MODULE_SOURCES+=xer_support.c
ASN_MODULE_HEADERS+=xer_decoder.h
ASN_MODULE_SOURCES+=xer_decoder.c
ASN_MODULE_HEADERS+=xer_encoder.h
ASN_MODULE_SOURCES+=xer_encoder.c
ASN_MODULE_HEADERS+=per_support.h
ASN_MODULE_SOURCES+=per_support.c
ASN_MODULE_HEADERS+=per_decoder.h
ASN_MODULE_SOURCES+=per_decoder.c
ASN_MODULE_HEADERS+=per_encoder.h
ASN_MODULE_SOURCES+=per_encoder.c
ASN_MODULE_HEADERS+=per_opentype.h
ASN_MODULE_SOURCES+=per_opentype.c
ASN_CONVERTER_SOURCES+=converter-sample.c
lib_LTLIBRARIES=libsomething.la
libsomething_la_SOURCES=$(ASN_MODULE_SOURCES) $(ASN_MODULE_HEADERS)
# This file may be used as an input for make(3)
# Remove the lines below to convert it into a pure .am file
TARGET = ulp-dump
CFLAGS += -DASN_CONVERTER_TITLE="OMA UserPlane Location Protocol decoder" -DHAVE_CONFIG_H -DJUNKTEST -DPDU=ULP_PDU -I.
OBJS=${ASN_MODULE_SOURCES:.c=.o} ${ASN_CONVERTER_SOURCES:.c=.o}
all: ULP-PDU.c $(TARGET)
$(TARGET): ${OBJS}
$(CC) $(CFLAGS) -o $(TARGET) ${OBJS} $(LDFLAGS) $(LIBS)
.SUFFIXES:
.SUFFIXES: .c .o
.c.o:
$(CC) $(CFLAGS) -o $@ -c $<
clean:
rm -f $(TARGET)
rm -f $(OBJS)
regen: regenerate-from-asn1-source
regenerate-from-asn1-source:
../../asn1c/asn1c -S ../../skeletons -pdu=ULP-PDU -fcompound-names -gen-PER ../ulp.asn1
ULP-PDU.c: ../sample.makefile.regen ../ulp.asn1
make regen-makefile
@touch ULP-PDU.c
make
regen-makefile:
TITLE="OMA UserPlane Location Protocol decoder" \
ASN1CMDOPTS="-fcompound-names -gen-PER" \
ASN1MODULES="../ulp.asn1" \
ASN1PDU=ULP-PDU \
PROGNAME=ulp-dump \
../sample.makefile.regen
check: ${TARGET} check-ber check-xer check-per
@echo ================
@echo All tests passed
@echo ================
check-ber:
@if test -f sample-ULP-PDU-1.[db]er ; then \
for f in sample-ULP-PDU-*.[db]er; do \
for b in 1 17 33 980 8192; do \
echo "Recoding $$f into XER and back ($$b)..."; \
./${TARGET} -b $$b -iber -oxer $$f > ./.tmp.1.$$$$ || exit 2; \
./${TARGET} -b $$b -ixer -oxer ./.tmp.1.$$$$ > ./.tmp.2.$$$$ || exit 3; \
diff ./.tmp.1.$$$$ ./.tmp.2.$$$$ || exit 4; \
rm -f ./.tmp.[12].$$$$; \
echo "Test junking $$f (please wait)..."; \
./${TARGET} -J0.0001 -n 1000 -b $$b -iber -onull $$f || exit 5; \
./${TARGET} -J0.001 -n 1000 -b $$b -iber -onull $$f || exit 6; \
done; done; fi
check-xer:
@if test -f sample-ULP-PDU-1.xer ; then \
for f in sample-ULP-PDU-*.xer; do \
for b in 1 17 33 980 8192; do \
echo "Recoding $$f into DER and back ($$b)..."; \
./${TARGET} -b $$b -ixer -oder $$f > ./.tmp.1.$$$$ || exit 2; \
./${TARGET} -b $$b -iber -oxer ./.tmp.1.$$$$ > ./.tmp.2.$$$$ || exit 3; \
diff $$f ./.tmp.2.$$$$ || exit 4; \
rm -f ./.tmp.[12].$$$$; \
echo "Test junking $$f (please wait)..."; \
./${TARGET} -J0.0001 -n 1000 -b $$b -ixer -onull $$f || exit 5; \
./${TARGET} -J0.001 -n 1000 -b $$b -ixer -onull $$f || exit 6; \
done; done; fi
check-per:
@if test -f sample-ULP-PDU-1-nopad.per ; then \
for f in sample-ULP-PDU-[1-9]-nopad.per; do \
for b in 1 17 33 980 8192; do \
echo "Recoding non-padded $$f into DER into XER and back ($$b)..."; \
./${TARGET} -b $$b -per-nopad -iper -oder $$f > ./.tmp.1.$$$$ || exit 2; \
./${TARGET} -b $$b -iber -oxer ./.tmp.1.$$$$ > ./.tmp.2.$$$$ || exit 3; \
./${TARGET} -b $$b -ixer -oder ./.tmp.2.$$$$ > ./.tmp.3.$$$$ || exit 4; \
diff ./.tmp.1.$$$$ ./.tmp.3.$$$$ || exit 5; \
rm -f ./.tmp.[123].$$$$; \
echo "Test junking $$f (please wait)..."; \
./${TARGET} -J0.0001 -n 1000 -b $$b -per-nopad -iper -onull $$f || exit 6; \
./${TARGET} -J0.001 -n 1000 -b $$b -per-nopad -iper -onull $$f || exit 7; \
done; done; fi
@if test -f sample-ULP-PDU-1.per ; then \
for f in sample-*-[1-9].per; do \
pdu=`echo $$f | sed -E -e "s/sample-([A-Za-z-]+)-[0-9].*/\1/"`; \
for b in 1 17 33 980 8192; do \
echo "Recoding $$f into DER into XER and back ($$b)..."; \
./${TARGET} -b $$b -p $$pdu -iper -oder $$f > ./.tmp.1.$$$$ || exit 3; \
./${TARGET} -b $$b -p $$pdu -iber -oxer ./.tmp.1.$$$$ > ./.tmp.2.$$$$ || exit 4; \
./${TARGET} -b $$b -p $$pdu -ixer -oper ./.tmp.2.$$$$ > ./.tmp.1.$$$$ || exit 5; \
diff $$f ./.tmp.1.$$$$ || exit 6; \
rm -f ./.tmp.[12].$$$$; \
echo "Test junking $$f (please wait)..."; \
./${TARGET} -J0.0001 -n 1000 -b $$b -iper -onull $$f || exit 7; \
./${TARGET} -J0.001 -n 1000 -b $$b -iper -onull $$f || exit 8; \
done; done; fi
distclean: clean
rm -f $(ASN_MODULE_SOURCES)
rm -f $(ASN_MODULE_HEADERS)
rm -f $(ASN_CONVERTER_SOURCES) $(ASN_CONVERTER_HEADERS)
rm -f Makefile.am.sample
GENERAL INFORMATION
===================
The OMA ULP (UserPlane Location Protocol) decoder.
Invoking `make` will compile the ASN.1 specifications from the
../ulp.asn1 file.
THERE IS NO ulp.asn1 FILE THERE YET!
OBTAINING THE ULP SPECIFICATION
===============================
Due to unclear stanza of Open Mobile Alliance regarding the extraction of
ASN.1 modules from their documents, and also due to some OMA membership
concerns, asn1c can not include the ULP ASN.1 module in its distribution.
To obtain the ULP ASN.1 specification, you should go to
http://www.openmobilealliance.org/UseAgreement.html
and agree with their licensing terms by clicking the "I ACCEPT" button.
Then, go to http://member.openmobilealliance.org/ftp/Public_documents/LOC/Permanent_documents/
and download the necessary specification file. For example, one of these:
Version 1.0 specifications (Candidate versions):
OMA-TS-ULP-V1_0-20070122-C.zip (V1.0, 2007 January 22)
OMA-TS-ULP-V1_0-20070613-C.zip (V1.0, 2007 June 13)
Version 2.0 specification (Draft version):
OMA-TS-ULP-V2_0-20070625-D.zip (V2.0, 2007 April 25)
A .ZIP file with several Microsoft Word .DOC files will download shortly.
You should extract the ASN.1 module from the section 8 of these .DOC files
and save it as the ../ulp.asn1 file. The ../ulp.asn1 file should start with
the following line
"ULP DEFINITIONS IMPLICIT TAGS ::="
and end with the "END" token.
Be careful not to copy any non-ASN.1 preambles from that .DOC file.
After obtaining the tap3.asn1, type `make` in the directory containing
this README file.
ulp-dump USAGE
==============
The ulp-dump utility may be used to dump the contents of the PER-encoded
ULP message record file:
./ulp-dump ulpfile.per # Print as XML (BASIC-XER)
The full list of recognized command line options may be obtained with
> ./ulp-dump -h