Initial revision

AUTHORS

+Lev Walkin <vlm@lionet.info>

BUGS

+
+0. ASN.1 grammar parser is written mostly with respect to constructing a tree,
+so a tree destruction is not fully supported and certain memory leaks are
+known. Not a huge problem for run-once programs like a compiler.
+NOTE:	This statement does not apply to the target code _produced_
+	by the compiler.
+
+1. REAL type is not supported yet.
+
+2. For purposes of compilation, INTEGER type is modelled using a large
+static type (asn_integer_t), but defined as any positive or negative value
+by ASN.1. Not a problem as most specifications use very small values anyway.
+NOTE:	This statement does not apply to the target code _produced_
+	by the compiler.
+
+3. ASN Macros are prohibited by the current ASN.1 standard,
+and are not supported.
+
+4. Multiple tags applied at the same level are not supported:
+	BadTags ::= [0] EXPLICIT [2] IMPLICIT OtherType
+   The same thing could be achieved by using the indirection:
+	GoodTags     ::= [0] EXPLICIT OtherTypePtr
+	OtherTypePtr ::= [2] IMPLICIT OtherType
+
+5. Mixed definite/indefinite length in a _single_ BER tags sequence is not
+supported. Should not be a problem in the real world. Please note that it
+is still possible, for example, to encode a wrapper structure using definite
+length, and encode its substructure member using indefinite length. The BER
+decoder is perfectly capable of decoding such sequences.
+
+

COPYING

+/*-
+ * Copyright (c) 2003, 2004 Lev Walkin <vlm@lionet.info>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $Id$
+ */

ChangeLog

+
+0.8.10:	2004-Jun-02
+
+	* Added const qualifier where necessary.
+	* Changed position of outmost_tag fetcher within asn1_TYPE_descriptor_t
+	  structure.
+
+0.8.9:	2004-May-26
+
+	* Added *_{get|set}_arcs_*() functions for OBJECT IDENTIFIER
+	  and RELATIVE-OID, together with test cases.
+
+0.8.8:	2004-May-09
+
+	* Introduced subtype constraints support (incomplete!).
+	* Fixed compiler. If the last member of the SEQUENCE is OPTIONAL
+	  and absent in the encoding, and the type is extensible (...) or
+	  EXTENSIBILITY IMPLIED flag is set, then the structure could not
+	  be correctly decoded. (Severity: high, Security impact: low).
+	* Compiler: fixed recursive ASN.1 types inclusion (Severity: low,
+	  Security impact: none).
+	* Parser: IMPORTS/FROM fixes, now allowing multiple sections.
+	* Code compiled and checked on PowerPC (@MacOS X). No major portability
+	  issues experienced.
+
+0.8.7:	2004-Apr-11	T-version-0-8-7
+
+	* Fixed SEQUENCE BER decoder: if the last member of the SEQUENCE is
+	  OPTIONAL and absent in the encoding, RC_FAIL was returned instead
+	  of RC_OK (Severity: high, Security impact: low).
+	* Added test case to check the above problem.
+	* Added test case to check -fnative-integers mode.
+
+0.8.6:	2004-Apr-03	T-version-0-8-6
+
+	* Fixed compiler output for embedded ASN.1 structures.
+
+0.8.5:	2004-Mar-28	T-version-0-8-5
+
+	* Fixed ber_tlv_length() computation problem (Severity: blocker,
+	  Security impact: none).
+	  Reported by <vss@high.net.ru>
+
+0.8.4:	2004-Mar-22
+
+	* Removed RC_ITAG enumeration element from BER decoder.
+	  This return code did not have much practical value.
+
+0.8.3:	2004-Mar-14	T-version-0-8-3
+
+	* Fixed SET::BER decoder: restart after reaching a buffer boundary
+	  weas broken (Severity: blocker, Security impact: low).
+	* Fixed OCTET STRING::BER decoder: restart after reaching a buffer
+	  boundary was broken (Severity: blocker, Security impact: low).
+	  Reported by <vss@high.net.ru>
+	* Added test cases to check decoders restartability.
+	* Slightly more general INTEGER2long decoder.
+	* Allowed nested /* C-type */ comments, as per X.680:2002.
+
+0.8.2:	2004-Mar-01	T-version-0-8-2
+
+	* Fixed SEQUENCE BER decoder: an OPTIONAL element was required, where
+	  should not have been (Severity: major; Security impact: low).
+	* Fixed print_struct pointer inheritance.
+	* Added -fno-c99 and -funnamed-unions
+
+0.8.1:	2004-Feb-22
+
+	* -R switch to asn1c: Omit support code, compile only the tables.
+	* Introduced NativeInteger pseudotype.
+	* Corrected the informal print_struct()'s output format.
+
+0.8.0:	2004-Feb-03	T-version-0-8-0
+
+	* Some documentation is created (a .pdf and a short manual page).
+	* Last touches to the code.
+
+0.7.9:	2004-Feb-01	T-version-0-7-9
+
+	* Human readable printing support.
+	* Support for implicit (standard) constraints.
+
+0.7.8:	2004-Jan-31
+
+	* SET now rejects duplicate fields in the data stream.
+
+0.7.7:	2004-Jan-25
+
+	* Added types: GeneralizedTime and UTCTime.
+
+0.7.6:	2004-Jan-24	T-version-0-7-6
+
+	* DER encoding of a SET OF now involves dynamic sorting.
+
+0.7.5:	2004-Jan-24	T-version-0-7-5
+
+	* DER encoding of a SET with untagged CHOICE
+	  now involves dynamic sorting.
+
+0.7.0:	2004-Jan-19	T-version-0-7-0
+
+	* A bunch of DER encoders is implemented.
+
+0.6.6:	2004-Jan-11
+
+	* Implemented CHOICE decoder.
+	* Implemented destructors support.
+
+0.6.5:	2004-Jan-03
+
+	* Implemented SET decoder.
+	* Implemented SET OF and SEQUENCE OF decoders.
+
+0.6.4:	2003-Dec-31
+
+	* Implemented BOOLEAN, NULL, ENUMERATED decoders.
+	* Implemented OCTET STRING decoder.
+	* Implemented BIT STRING decoder.
+
+0.6:	2003-Dec-30
+
+	* First decoding of a BER-encoded structure!
+
+0.5:	2003-Dec-28
+
+	* Framework and most of the compiler backbone coding done.
+
+0.1:	2003-Nov-28
+
+	* Programming started.

INSTALL

+QUICK START INSTALLATION
+========================
+
+./configure	# Configure the build infrastructure for your platform
+make		# Build the libraries and the compiler
+make check	# Ensure that the code is still behaving well
+		# after compiling on your platform
+make install	# Install the compiler into standard location
+
+
+QUICK USAGE GUIDE
+=================
+
+For usage guide and more information please refer to README file.

MANIFEST

+libasn1compiler
+libasn1parser
+libasn1print
+libasn1fix
+skeletons
+examples
+tests
+asn1c
+doc

Makefile.am

+
+SUBDIRS = 				\
+	libasn1parser libasn1print	\
+	libasn1fix libasn1compiler	\
+	skeletons examples tests	\
+	doc asn1c
+
+EXTRA_DIST = BUGS MANIFEST

Makefile.in

+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+ADD_CFLAGS = @ADD_CFLAGS@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AWK = @AWK@
+CC = @CC@
+CONFIGURE_DEPENDS = @CONFIGURE_DEPENDS@
+CPP = @CPP@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+EXEEXT = @EXEEXT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LEX = @LEX@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+MAINT = @MAINT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PATH = @PATH@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+YACC = @YACC@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+SUBDIRS = \
+	libasn1parser libasn1print	\
+	libasn1fix libasn1compiler	\
+	skeletons examples tests	\
+	doc asn1c
+
+
+EXTRA_DIST = BUGS MANIFEST
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
+	uninstall-info-recursive all-recursive install-data-recursive \
+	install-exec-recursive installdirs-recursive install-recursive \
+	uninstall-recursive check-recursive installcheck-recursive
+DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
+	Makefile.am Makefile.in NEWS TODO aclocal.m4 config.guess \
+	config.h.in config.sub configure configure.in depcomp \
+	install-sh ltconfig ltmain.sh missing mkinstalldirs
+DIST_SUBDIRS = $(SUBDIRS)
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$@ $(SHELL) ./config.status
+
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in 
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+config.h: stamp-h
+	@if test ! -f $@; then \
+		rm -f stamp-h; \
+		$(MAKE) stamp-h; \
+	else :; fi
+stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h stamp-hT
+	@echo timestamp > stamp-hT 2> /dev/null
+	cd $(top_builddir) \
+	  && CONFIG_FILES= CONFIG_HEADERS=config.h \
+	     $(SHELL) ./config.status
+	@mv stamp-hT stamp-h
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/./stamp-h.in
+	@if test ! -f $@; then \
+		rm -f $(srcdir)/./stamp-h.in; \
+		$(MAKE) $(srcdir)/./stamp-h.in; \
+	else :; fi
+$(srcdir)/./stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
+	@rm -f $(srcdir)/./stamp-h.in $(srcdir)/./stamp-h.inT
+	@echo timestamp > $(srcdir)/./stamp-h.inT 2> /dev/null
+	cd $(top_srcdir) && $(AUTOHEADER)
+	@mv $(srcdir)/./stamp-h.inT $(srcdir)/./stamp-h.in
+
+distclean-hdr:
+	-rm -f config.h
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
+	  || etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP)
+
+GTAGS:
+	here=`CDPATH=: && cd $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = .
+# Avoid unsightly `./'.
+distdir = $(PACKAGE)-$(VERSION)
+
+GZIP_ENV = --best
+
+distdir: $(DISTFILES)
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+	mkdir $(distdir)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$(top_distdir)" \
+	        distdir=../$(distdir)/$$subdir \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	chmod a-w $(distdir)
+	dc_install_base=`CDPATH=: && cd $(distdir)/=inst && pwd` \
+	  && cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
+	     || (echo "Error: files left after uninstall" 1>&2; \
+	         exit 1) ) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && $(MAKE) $(AM_MAKEFLAGS) distclean \
+	  && rm -f $(distdir).tar.gz \
+	  && (test `find . -type f -print | wc -l` -eq 0 \
+	     || (echo "Error: files left after distclean" 1>&2; \
+	         exit 1) )
+	-chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
+	@echo "$(distdir).tar.gz is ready for distribution" | \
+	  sed 'h;s/./=/g;p;x;p;x'
+check-am: all-am
+check: check-recursive
+all-am: Makefile config.h
+installdirs: installdirs-recursive
+installdirs-am:
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+dist-all: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+distclean: distclean-recursive
+	-rm -f config.status config.cache config.log
+distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \