test_case_list.xml 838 KB
Newer Older
Rohit Gupta's avatar
Rohit Gupta committed
1
<testCaseList>
2

3

Rohit Gupta's avatar
Rohit Gupta committed
4
<MachineList>amerique mozart hutch starsky stevens calisson nano superserver </MachineList>
Rohit Gupta's avatar
Rohit Gupta committed
5
 <NFSResultsShare>/mnt/sradio/TEST_RESULTS/</NFSResultsShare>
6
7
 <GitOAI5GRepo>https://gitlab.eurecom.fr/oai/openairinterface5g.git</GitOAI5GRepo>
 <GitOpenair-cnRepo>https://gitlab.eurecom.fr/oai/openair-cn.git</GitOpenair-cnRepo>
8
 <GitOAI5GRepoBranch>develop</GitOAI5GRepoBranch>
9
 <GitOpenair-cnRepoBranch>develop</GitOpenair-cnRepoBranch>
10
 <CleanUpOldProgs>oaisim oaisim_nos1 lte-softmodem lte-softmodem-nos1 mme_gw run_epc auth_request run_hss oai_hss mme spgw hss hss_sim wvdial  iperf iperf_script iperf_script_phone ping tshark rrh_gw iperf3 iperf3_script iperf3_script_phone pppd starthss start_ltebox stop_ltebox configure_cots_sony_experia_m4_ue configure_cots_huaweiE398_ue configure_cots_bandrich_ue</CleanUpOldProgs>	
Rohit Gupta's avatar
Rohit Gupta committed
11
 <CleanUpAluLteBox>sudo -S -E /opt/ltebox/tools/stop_ltebox</CleanUpAluLteBox>
12
<ExmimoRfStop>exmimo_pci=`lspci -m | grep Xilinx`; if [ -n "$exmimo_pci" ] ; then $OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; fi; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py --reset-ue;  sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue; uname -a; sudo -E dmesg</ExmimoRfStop>
13
 <Timeout_execution>36000</Timeout_execution>
Rohit Gupta's avatar
Rohit Gupta committed
14
 <TestCaseExclusionList>010141 0102+ 010301 010303 010304 010305 0104+ 015508 015511 015520 015523 015518 015519 015520 015521 015522 015523 015602 015605 015818 015819 015820 015821 015822 015823 016102 016105 016502 016505 017002 017005 018002 018005 018502 018505  025514 025517 025520 025523 025518 025519 025520 025521 025522 025523</TestCaseExclusionList>
15
 <nruns_lte-softmodem>3</nruns_lte-softmodem>
Cedric Roux's avatar
Cedric Roux committed
16
 <MachineListGeneric>nano mozart hutch starsky stevens calisson superserver </MachineListGeneric>
17
18
19
20
     <testCase id="010101" >
     <class>compilation</class>
     <desc>Build oaisim.Rel8</desc>
     <pre_compile_prog></pre_compile_prog>
21
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
22
     <compile_prog_args>--oaisim -r Rel8  -c </compile_prog_args>
23
24
25
26
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/oaisim_build_oai/build/oaisim
                       $OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/nvram</compile_prog_out>
27
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
28
29
30
31
32
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
33
     <tags>oaisim.Rel8</tags>
34
     <nruns>1</nruns>
35
     </testCase>
36

37
38
     <testCase id="010102" >
     <class>compilation</class>
39
     <desc>Build oaisim.Rel10</desc>
40
     <pre_compile_prog></pre_compile_prog>
41
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
42
     <compile_prog_args>--oaisim -r Rel10  -c </compile_prog_args>
43
44
45
46
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/oaisim_build_oai/build/oaisim
                       $OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/nvram</compile_prog_out>
47
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
48
49
50
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
51
     <search_expr_true></search_expr_true>
52
     <search_expr_false></search_expr_false>
53
     <tags>oaisim.Rel10</tags>
54
55
56
57
58
     <nruns>1</nruns>
     </testCase>

     <testCase id="010103" >
     <class>compilation</class>
59
60
61
     <desc>Build oaisim_noS1.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
62
     <compile_prog_args>--oaisim -r Rel10 --noS1  -c </compile_prog_args>
63
64
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
                       $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/rb_tool
65
                       $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko</compile_prog_out>
66
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
67
68
69
70
71
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
72
     <tags>oaisim_noS1.Rel10</tags>
73
     <nruns>1</nruns>
74
     </testCase> 
75

76
     <testCase id="010110" >
77
     <class>compilation</class>
78
     <desc>Build lte_softmodem_noS1.USRP.Rel10</desc>
79
     <pre_compile_prog></pre_compile_prog>
80
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
81
     <compile_prog_args>--eNB -w USRP -r Rel10 --noS1  -c </compile_prog_args>
82
83
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
Rohit Gupta's avatar
Rohit Gupta committed
84
85
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_usrpdevif.so</compile_prog_out>
86
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
87
88
89
90
91
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
92
     <tags>lte-softmodem_noS1.USRP.Rel10</tags>
93
     <nruns>1</nruns>
94
     </testCase> 
95

96
     <testCase id="010111" >
97
     <class>compilation</class>
98
     <desc>Build lte_softmodem_noS1.EXMIMO.Rel10</desc>
99
     <pre_compile_prog></pre_compile_prog>
100
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
101
     <compile_prog_args>--eNB -w EXMIMO -r Rel10 --noS1  -c </compile_prog_args>
102
103
104
105
106
107
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/updatefw
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/oarf_config_exmimo.oct</compile_prog_out>
108
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
109
110
111
112
113
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
114
     <tags>lte-softmodem_noS1.EXMIMO.Rel10</tags>
115
     <nruns>1</nruns>
116
     </testCase> 
117

118
     <testCase id="010112" >
119
     <class>compilation</class>
120
     <desc>Build lte_softmodem_noS1.BLADERF.Rel10</desc>
121
     <pre_compile_prog></pre_compile_prog>
122
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
123
     <compile_prog_args>--eNB -w BLADERF -r Rel10 --noS1  -c </compile_prog_args>
124
125
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
Rohit Gupta's avatar
Rohit Gupta committed
126
127
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_bladerfdevif.so</compile_prog_out>
128
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
129
130
131
132
133
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
134
     <tags>lte-softmodem_noS1.BLADERF.Rel10</tags>
135
     <nruns>1</nruns>
136
137
138
     </testCase> 

     <testCase id="010113" >
139
     <class>compilation</class>
140
     <desc>Build lte_softmodem_noS1.ETHERNET.Rel10</desc>
141
     <pre_compile_prog></pre_compile_prog>
142
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
Rohit Gupta's avatar
Rohit Gupta committed
143
     <compile_prog_args>--eNB -w None -t ETHERNET -r Rel10 --noS1  -c </compile_prog_args>
144
145
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
Rohit Gupta's avatar
Rohit Gupta committed
146
147
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_eth_transpro.so</compile_prog_out>
148
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
149
150
151
152
153
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
154
     <tags>lte-softmodem_noS1.ETHERNET.Rel10</tags>
155
     <nruns>1</nruns>
156
157
     </testCase> 

Rohit Gupta's avatar
Rohit Gupta committed
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
     <testCase id="010114" >
     <class>compilation</class>
     <desc>Build lte_softmodem_noS1.LMSSDR.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w LMSSDR -r Rel10 --noS1  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_lmssdrdevif.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem_noS1.LMSSDR.Rel10</tags>
     <nruns>1</nruns>
     </testCase>
177
178


179
180
     <testCase id="010120" >
     <class>compilation</class>
181
     <desc>Build lte_softmodem.USRP.Rel10</desc>
182
     <pre_compile_prog></pre_compile_prog>
183
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
184
     <compile_prog_args>--eNB -w USRP -r Rel10   -c </compile_prog_args>
Rohit Gupta's avatar
Rohit Gupta committed
185
186
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_usrpdevif.so</compile_prog_out>
187
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
188
189
190
191
192
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
193
     <tags>lte-softmodem.USRP.Rel10</tags>
194
     <nruns>1</nruns>
195
     </testCase> 
196

197
198
199
200
201
     <testCase id="010121" >
     <class>compilation</class>
     <desc>Build lte_softmodem.EXMIMO.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
202
     <compile_prog_args>--eNB -w EXMIMO -r Rel10   -c </compile_prog_args>
203
204
205
206
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/updatefw
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/oarf_config_exmimo.oct</compile_prog_out>
207
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
208
209
210
211
212
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
Rohit Gupta's avatar
Rohit Gupta committed
213
     <tags>lte-softmodem.EXMIMO.Rel10</tags>
214
215
216
217
218
219
220
221
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010122" >
     <class>compilation</class>
     <desc>Build lte_softmodem.BLADERF.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
222
     <compile_prog_args>--eNB -w BLADERF -r Rel10   -c </compile_prog_args>
Rohit Gupta's avatar
Rohit Gupta committed
223
224
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_bladerfdevif.so</compile_prog_out>
225
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
226
227
228
229
230
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
Rohit Gupta's avatar
Rohit Gupta committed
231
     <tags>lte-softmodem.BLADERF.Rel10</tags>
232
233
234
235
236
237
238
239
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010123" >
     <class>compilation</class>
     <desc>Build lte_softmodem.ETHERNET.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
Rohit Gupta's avatar
Rohit Gupta committed
240
241
242
     <compile_prog_args>--eNB -w None -t ETHERNET -r Rel10   -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_eth_transpro.so</compile_prog_out>
243
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
244
245
246
247
248
249
250
251
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem.ETHERNET.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 
252

Rohit Gupta's avatar
Rohit Gupta committed
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
     <testCase id="010124" >
     <class>compilation</class>
     <desc>Build lte_softmodem.LMSSDR.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w LMSSDR -r Rel10   -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_lmssdrdevif.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem.LMSSDR.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

271
272
     <testCase id="010130" >
     <class>compilation</class>
Rohit Gupta's avatar
Rohit Gupta committed
273
     <desc>Build phy unitary simulators</desc>
274
275
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
Rohit Gupta's avatar
Rohit Gupta committed
276
     <compile_prog_args>--phy_simulators   -c </compile_prog_args>
277
278
279
280
281
282
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/pucchsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/prachsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/pdcchsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/pbchsim
Rohit Gupta's avatar
Rohit Gupta committed
283
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/mbmssim</compile_prog_out>
284
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
285
286
287
288
289
290
291
292
293
294
295
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>unitary-sim.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010140" >
     <class>compilation</class>
Rohit Gupta's avatar
Rohit Gupta committed
296
     <desc>Build RRH Gateway for USRP(RF) + Ethernet (Transport)</desc>
297
298
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
Rohit Gupta's avatar
Rohit Gupta committed
299
300
301
302
     <compile_prog_args>--RRH -w USRP -t ETHERNET  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_usrpdevif.so
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so</compile_prog_out>
303
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
304
305
306
307
308
309
310
311
312
313
314
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRH.USRP.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010141" >
     <class>compilation</class>
Rohit Gupta's avatar
Rohit Gupta committed
315
     <desc>Build RRH Gateway for EXMIMO(RF) + Ethernet (Transport)</desc>
316
317
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
Rohit Gupta's avatar
Rohit Gupta committed
318
     <compile_prog_args>--RRH -w EXMIMO -t ETHNERNET  -c </compile_prog_args>
319
320
321
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/CMakeFiles/openair_rf/openair_rf.ko
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/updatefw
Rohit Gupta's avatar
Rohit Gupta committed
322
323
324
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/oarf_config_exmimo.oct
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_exmimodevif.so
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so</compile_prog_out>
325
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
326
327
328
329
330
331
332
333
334
335
336
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRH.EXMIMO.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010142" >
     <class>compilation</class>
Rohit Gupta's avatar
Rohit Gupta committed
337
     <desc>Build RRH Gateway for BladeRF (RF) nad Ethernet (transport)</desc>
338
     <pre_compile_prog></pre_compile_prog>
339
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
Rohit Gupta's avatar
Rohit Gupta committed
340
341
342
343
     <compile_prog_args>--RRH -w BLADERF -t ETHERNET  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_bladerfdevif.so
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so</compile_prog_out>
344
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
345
346
347
348
349
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
Rohit Gupta's avatar
Rohit Gupta committed
350
     <tags>RRH.BLADERF.Rel10</tags>
351
352
353
     <nruns>1</nruns>
     </testCase>

Rohit Gupta's avatar
Rohit Gupta committed
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
    <testCase id="010143" >
     <class>compilation</class>
     <desc>Build RRH Gateway for LMSSDR (RF) and Ethernet (transport)</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--RRH -w LMSSDR -t ETHERNET  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_lmssdrdevif.so
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRH.LMSSDR.Rel10</tags>
     <nruns>1</nruns>
     </testCase>
Rohit Gupta's avatar
Rohit Gupta committed
372

373
374
375
376
377
378
379
     <testCase id="010150" >
     <class>compilation</class>
     <desc>Build RRU (NGFI) for USRP (Rel 10) w/ ETHERNET transport</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w USRP -t ETHERNET  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
380
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_usrpdevif.so
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_eth_transpro.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRU.USRP.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010151" >
     <class>compilation</class>
     <desc>Build RRU (NGFI) for EXMIMO  (Rel 10) w/ ETHERNET transport</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
397
     <compile_prog_args>--eNB -w EXMIMO -t ETHERNET  -c </compile_prog_args>
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/updatefw
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/oarf_config_exmimo.oct
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_exmimodevif.so
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_eth_transpro.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRU.EXMIMO.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010152" >
     <class>compilation</class>
     <desc>Build RRU (NGFI) for BLADERF (Rel 10) w/ ETHERNET transport</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w BLADERF -t ETHERNET  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_bladerfdevif.so
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_eth_transpro.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRU.BLADERF.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

    <testCase id="010153" >
     <class>compilation</class>
     <desc>Build RRU (NGFI) for LMSSDR  (Rel 10) w/ ETHERNET transport</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w LMSSDR -t ETHERNET  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_lmssdrdevif.so
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_eth_transpro.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
448
     <tags>RRU.LMSSDR.Rel10</tags>
449
450
451
     <nruns>1</nruns>
     </testCase>

452
453
   <testCase id="010200">
      <class>execution</class>
Rohit Gupta's avatar
Rohit Gupta committed
454
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
455
      <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
456
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
457
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
458
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
459
      <pre_exec_args></pre_exec_args>
460
      <test_config_file></test_config_file>
461
      <main_exec>sudo -E $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
462
463
464
465
466
467
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -s15 
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -s15 </main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
468
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2</tags>
469
470
471
472
473
474
475
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010201">
      <class>execution</class>
Rohit Gupta's avatar
Rohit Gupta committed
476
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit</desc>
477
      <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
478
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
479
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
480
      <test_config_file></test_config_file>
481
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
482
      <pre_exec_args></pre_exec_args>
483
      <main_exec>sudo -E  $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
484
485
486
487
488
489
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -a -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -a -s15 
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -a -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -a -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -a -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -a -s15 </main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
490
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2</tags>
491
492
493
494
495
496
497
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010202">
      <class>execution</class>
Rohit Gupta's avatar
Rohit Gupta committed
498
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
499
<pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
500
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
501
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
502
      <test_config_file></test_config_file>
503
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
504
      <pre_exec_args></pre_exec_args>
505
      <main_exec>sudo -E  $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
506
507
508
509
510
511
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -s15 </main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
512
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 </tags>
513
514
515
516
517
518
519
520
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010203">
      <class>execution</class>
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit</desc>
521
      <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
522
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
523
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
524
      <test_config_file></test_config_file>
525
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
526
      <pre_exec_args></pre_exec_args>
527
      <main_exec>sudo -E  $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
528
529
530
531
532
533
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -a -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -a -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -a -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -a -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -a -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -a -s15</main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
534
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2  oaisim_nos1.tdd.20MHz.TM2</tags>
535
536
537
538
539
540
541
542
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010204">
      <class>execution</class>
      <desc>Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses</desc>
543
       <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
544
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
545
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
546
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
547
      <pre_exec_args></pre_exec_args>
548
      <test_config_file></test_config_file>
549
      <main_exec>sudo -E  $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
550
551
552
553
554
555
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -c26 
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -c26 
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -c26 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -c26 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -c26 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -c26</main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
556
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 </tags>
557
558
559
560
561
562
563
564
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010205">
      <class>execution</class>
      <desc>Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check that there is no packet losses</desc>
565
      <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
566
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
567
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
568
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
569
      <pre_exec_args></pre_exec_args>
570
      <test_config_file></test_config_file>
571
      <main_exec>sudo -E  $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
572
573
574
575
576
577
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -c26 -a
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -c26  -a
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -c26 -a
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -c26  -a
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -c26 -a
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -c26  -a</main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
578
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 </tags>
579
580
581
582
583
584
585
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010300">
      <class>execution</class>
Rohit Gupta's avatar
Rohit Gupta committed
586
      <desc>Run OAISIM Rel10 FDD, 1 eNB + 1 UE 1 eNB (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
587
      <pre_compile_prog></pre_compile_prog>
588
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
589
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
590
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
591
      <pre_exec_args></pre_exec_args>
592
      <main_exec>sudo -E  $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
593
594
595
596
597
598
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -s15</main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
599
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags>
600
601
602
603
604
605
606
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010301">
      <class>execution</class>
Rohit Gupta's avatar
Rohit Gupta committed
607
      <desc>Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors</desc>
608
      <pre_compile_prog></pre_compile_prog>
609
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
610
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
611
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
612
      <pre_exec_args></pre_exec_args>
613
      <main_exec>sudo -E  $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
614
615
616
617
618
619
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -a -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -a -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -a -s15</main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
620
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags> 
621
622
623
624
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>
Rohit Gupta's avatar
Rohit Gupta committed
625

626
627
    <testCase id="010302">
      <class>execution</class>
Rohit Gupta's avatar
Rohit Gupta committed
628
      <desc> Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
629
      <pre_compile_prog></pre_compile_prog>
630
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
631
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
632
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
633
      <pre_exec_args></pre_exec_args>
634
      <main_exec>sudo -E $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
635
636
637
638
639
640
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -F -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -F -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -F -s15</main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
641
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 </tags> 
642
643
644
645
646
647
648
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010303">
      <class>execution</class>
Rohit Gupta's avatar
Rohit Gupta committed
649
      <desc>Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors</desc>
650
      <pre_compile_prog></pre_compile_prog>
651
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
652
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
653
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
654
      <pre_exec_args></pre_exec_args>
655
      <main_exec>sudo -E  $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
656
657
658
659
660
661
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -F -a -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -F -a -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -F -a -s15</main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
662
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags>
663
664
665
666
667
668
669
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010304">
      <class>execution</class>
Rohit Gupta's avatar
Rohit Gupta committed
670
      <desc>Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) without PHY_ABSTRACTION mode, ping from from eNB to UE, and for check for no packet losses</desc>
671
      <pre_compile_prog></pre_compile_prog>
672
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
673
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
674
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
675
      <pre_exec_args></pre_exec_args>
676
      <main_exec>sudo -E  $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
677
678
679
680
681
682
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -c26
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -c26
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -c26
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -c26
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -c26
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -c26</main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
683
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags>
684
685
686
687
688
689
690
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010305">
      <class>execution</class>
Rohit Gupta's avatar
Rohit Gupta committed
691
      <desc>Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check for no packet losses</desc>
692
      <pre_compile_prog></pre_compile_prog>
693
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
694
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
695
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
696
      <pre_exec_args></pre_exec_args>
697
      <main_exec>sudo -E  $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
698
699
700
701
702
703
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -c26 -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -c26 -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -c26 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -c26 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -c26 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -c26 -a</main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
704
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 </tags>
705
706
707
708
709
710
711
712
713
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010400">
      <class>execution</class>
      <desc>Check if eMBMS procedure is not finished completely, make sure that the SIB13/MCCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
714
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
715
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
716
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
717
      <pre_exec_args></pre_exec_args>
718
      <main_exec>sudo -E  $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
719
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -l7 -Q3 -n 100 -b1 -u1</main_exec_args>
720
721
      <search_expr_true>"Found MBSFNAreaConfiguration from eNB 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
722
      <tags>oaisim_noS1.eMBMS</tags>
723
724
725
726
727
728
729
      <nruns>3</nruns>
    </testCase>

    <testCase id="010401">
      <class>execution</class>
      <desc>Check if eMBMS multicast/broadcast data is received, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
730
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
731
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
732
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
733
      <pre_exec_args></pre_exec_args>
734
      <main_exec>sudo -E  $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
735
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -l7 -T mscbr -Q3 -n 100 -b1 -u1</main_exec_args>
736
737
      <search_expr_true>"Received a multicast packet"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
738
      <tags>oaisim_noS1.eMBMS</tags>
739
740
741
742
743
744
745
      <nruns>3</nruns>
    </testCase>

    <testCase id="010402">
      <class>execution</class>
      <desc>Check for eMBMS multicast/broadcast data received in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
746
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
747
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
748
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
749
      <pre_exec_args></pre_exec_args>
750
      <main_exec>sudo -E  $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
751
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -l7 -F -T mscbr -Q3 -n 100 -b1 -u1</main_exec_args>
752
753
      <search_expr_true>"Received a multicast packet"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
754
      <tags>oaisim_noS1.eMBMS</tags>
755
756
757
758
759
760
761
      <nruns>3</nruns>
    </testCase>

    <testCase id="010403">
      <class>execution</class>
      <desc>Check for eMBMS multicast/broadcast DF relaying working properly in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
762
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
763
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
764
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
765
      <pre_exec_args></pre_exec_args>
766
      <main_exec>sudo -E  $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
767
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -l7 -c43 -F -T mbvbr -Q4 -j1 -n120</main_exec_args>
768
769
      <search_expr_true>"MTCH for sync area 1"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
770
      <tags>oaisim_noS1.eMBMS</tags>
771
772
773
774
775
776
777
      <nruns>3</nruns>
    </testCase>

    <testCase id="015000">
      <class>execution</class>
      <desc>test_aes128_cmac_encrypt</desc>
      <pre_compile_prog></pre_compile_prog>
778
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
779
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
780
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
781
      <pre_exec_args></pre_exec_args>
782
      <main_exec> $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt</main_exec>
783
784
785
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
786
      <tags>test_aes128_cmac_encrypt</tags>
787
788
789
790
791
792
793
      <nruns>3</nruns>
    </testCase>

    <testCase id="015001">
      <class>execution</class>
      <desc>test_aes128_ctr_decrypt</desc>
      <pre_compile_prog></pre_compile_prog>
794
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
795
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
796
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
797
      <pre_exec_args></pre_exec_args>
798
      <main_exec> $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_decrypt</main_exec>
799
800
801
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
802
      <tags>test_aes128_ctr_decrypt</tags>
803
804
805
806
807
808
809
      <nruns>3</nruns>
    </testCase>

    <testCase id="015002">
      <class>execution</class>
      <desc>test_aes128_ctr_encrypt</desc>
      <pre_compile_prog></pre_compile_prog>
810
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
811
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
812
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
813
      <pre_exec_args></pre_exec_args>
814
      <main_exec> $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_encrypt</main_exec>
815
816
817
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
818
      <tags>test_aes128_ctr_encrypt</tags>
819
820
821
822
823
824
825
      <nruns>3</nruns>
    </testCase>

    <testCase id="015003">
      <class>execution</class>
      <desc>test_secu_kenb</desc>
      <pre_compile_prog></pre_compile_prog>
826
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
827
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
828
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
829
      <pre_exec_args></pre_exec_args>
830
      <main_exec> $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_kenb</main_exec>
831
832
833
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
834
      <tags>test_secu_kenb</tags>
835
836
837
838
839
840
841
      <nruns>3</nruns>
    </testCase>

    <testCase id="015004">
      <class>execution</class>
      <desc>test_secu_knas</desc>
      <pre_compile_prog></pre_compile_prog>
842
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
843
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
844
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
845
      <pre_exec_args></pre_exec_args>
846
      <main_exec> $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas</main_exec>
847
848
849
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
850
      <tags>test_secu_knas</tags>
851
852
853
854
855
856
857
      <nruns>3</nruns>
    </testCase>

    <testCase id="015005">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eea1</desc>
      <pre_compile_prog></pre_compile_prog>
858
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
859
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
860
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
861
      <pre_exec_args></pre_exec_args>
862
      <main_exec> $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea1</main_exec>
863
864
865
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
866
      <tags>test_secu_knas_encrypt_eea1</tags>
867
868
869
870
871
872
873
      <nruns>3</nruns>
    </testCase>

    <testCase id="015006">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eea2</desc>
      <pre_compile_prog></pre_compile_prog>
874
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
875
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
876
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
877
      <pre_exec_args></pre_exec_args>
878
      <main_exec> $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea2</main_exec>
879
880
881
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
882
      <tags>test_secu_knas_encrypt_eea2</tags>
883
884
885
886
887
888
889
      <nruns>3</nruns>
    </testCase>

   <testCase id="015007">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eia1</desc>
      <pre_compile_prog></pre_compile_prog>
890
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
891
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
892
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
893
      <pre_exec_args></pre_exec_args>
894
      <main_exec> $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1</main_exec>
895
896
897
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
898
      <tags>test_secu_knas_encrypt_eia1</tags>
899
900
901
902
903
904
905
      <nruns>3</nruns>
    </testCase>

   <testCase id="015008">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eia2</desc>
      <pre_compile_prog></pre_compile_prog>
906
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
907
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
908
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
909
      <pre_exec_args></pre_exec_args>
910
      <main_exec> $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1</main_exec>
911
912
913
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
914
      <tags>test_secu_knas_encrypt_eia2</tags>
915
916
917
918
919
920
921
      <nruns>3</nruns>
    </testCase>

   <testCase id="015009">
      <class>execution</class>
      <desc>test_kdf</desc>
      <pre_compile_prog></pre_compile_prog>
922
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
923
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
924
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
925
      <pre_exec_args></pre_exec_args>
926
      <main_exec> $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf</main_exec>
927
928
929
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
930
      <tags>test_kdf</tags>
931
932
933
934
935
      <nruns>3</nruns>
    </testCase>

    <testCase id="015100">
      <class>execution</class>
936
      <desc>dlsim Test cases. (Test 1: 10 MHz, R2.FDD (MCS 5), EVA5, -1dB),
937
      (Test 5: 1.4 MHz, R4.FDD (MCS 4), EVA5, 0dB (70%)),
938
939
940
941
942
943
944
945
946
947
948
949
      (Test 6: 10 MHz, R3.FDD (MCS 15), EVA5, 6.7dB (70%)),
      (Test 6b: 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (70%)),
      (Test 7: 10 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (30%)),
      (Test 7b: 5 MHz, R3-1.FDD (MCS 15), ETU70, 1.4 dB (30%)),
      (Test 10: 5 MHz, R6.FDD (MCS 25), EVA5, 17.4 dB (70%)),
      (Test 10b: 5 MHz, R6-1.FDD (MCS 24,18 PRB), EVA5, 17.5dB (70%)),
      (Test 11: 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%)),
      (Test 15: 20 MHz, R.9 FDD	(MCS 26), EVA5, 17.6dB (70%)),
      (Test 15b: 20 MHz, R.9-2 FDD (MCS 26, 17PRB), EVA5, 17.3dB (70%)),
      (Test 15c: 20 MHz, R.9-1 FDD (MCS 26, 83 PRB), EVA5, 16.6dB (70%)),
      (TM2 Test 1: 10 MHz, R.11 FDD (MCS 14), EVA5, 6.8 dB (70%)),
      (TM2 Test 1b: 5 MHz, R.11-2 FDD (MCS 13), EVA5, 5.9 dB (70%))</desc>
950
      <pre_compile_prog></pre_compile_prog>
951
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
952
      <compile_prog_args> --phy_simulators  -c </compile_prog_args>
953
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
954
      <pre_exec_args></pre_exec_args>
955
      <main_exec> $OPENAIR_DIR/targets/bin/dlsim.Rel15</main_exec>
956
957
958
959
960
961
962
963
964
965
966
967
968
969
      <main_exec_args> -m5 -gF -s-1 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O60
                       -m4 -gF -s0 -w1.0 -f.2 -n500 -B6 -c4 -z2 -O60
                       -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O60
                       -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B25 -c2 -z2 -O60
                       -m15 -gG -s1.4 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O25
                       -m15 -gG -s1.4 -w1.0 -f.2 -n500 -B25 -c2 -z2 -O25
                       -m25 -gF -s17.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O60
                       -m25 -gF -s17.5 -w1.0 -f.2 -n500 -B25 -c3 -z2 -r1022 -O60
                       -m26 -gF -s17.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O60
                       -m26 -gF -s17.6 -w1.0 -f.2 -n500 -B100 -c2 -z2 -O60
                       -m26 -gF -s17.3 -w1.0 -f.2 -n500 -B100 -c2 -z2 -r1600 -O60
                       -m26 -gF -s16.6 -w1.0 -f.2 -n500 -B100 -c2 -z2 -r1899 -O60
		       -m14 -gF -s6.8  -w1.0 -f.2 -n500 -B50 -c2 -x2 -y2 -z2 -O60
                       -m13 -gF -s5.9  -w1.0 -f.2 -n500 -B25 -c3 -x2 -y2 -z2 -O60</main_exec_args>
970
      <tags>dlsim.test1 dlsim.test5 dlsim.test6 dlsim.test6b dlsim.test7 dlsim.test7b dlsim.test10 dlsim.test10b dlsim.test11 dlsim.test11a dlsim.test11b dlsim.test11c dlsim.TM2_test1 dlsim.TM2_test1b</tags>
971
972
      <search_expr_true>"passed"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
973
      <nruns>3</nruns>
974
975
976
977
    </testCase>

    <testCase id="015101">
      <class>execution</class>
978
979
980
981
982
983
      <desc>ulsim Test cases. (Test 1: 5 MHz, FDD (MCS 5), AWGN, 6dB),
             (Test 2: 5 MHz, FDD (MCS 16), AWGN , 12dB (70%)),
             (Test 3: 10 MHz, R3.FDD (MCS 5), AWGN, 6dB (70%)),
             (Test 4: 10 MHz, R3-1.FDD (MCS 16), AWGN, 12dB (70%)),
             (Test 5: 20 MHz, FDD (MCS 5), AWGN, 6dB (70%)),
             (Test 6: 20 MHz, FDD (MCS 16), AWGN, 12 dB (70%))</desc>
984
      <pre_compile_prog></pre_compile_prog>
985
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
986
      <compile_prog_args> --phy_simulators  -c </compile_prog_args>
987
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
988
      <pre_exec_args></pre_exec_args>
989
      <main_exec> $OPENAIR_DIR/targets/bin/ulsim.Rel15</main_exec>
990
991
992
993
994
995
      <main_exec_args> -BnbRBs=25 -mcs=5 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=6 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Operf=70 
                       -BnbRBs=25 -mcs=16 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=12 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Operf=70 
                        -BnbRBs=50 -mcs=5 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=6 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Operf=70  
                       -BnbRBs=50 -mcs=16 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=12 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Operf=70 
                        -BnbRBs=100 -mcs=5 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=6 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Operf=70 
                       -BnbRBs=100 -mcs=16 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=12 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Operf=70 </main_exec_args>
996
     <tags>ulsim.test1 ulsim.test2 ulsim.test3 ulsim.test4 ulsim.test5 ulsim.test6</tags>
997
      <search_expr_true>"passed"</search_expr_true>
998
999
1000
1001
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

1002
1003
    <testCase id="015102">
      <class>execution</class>
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
      <desc>ldpc Test cases. (Test1: block length = 3872),
             (Test2: block length = 4224),
             (Test3: block length = 4576),
             (Test4: block length = 4928),
             (Test5: block length = 5280),
             (Test6: block length = 5632),
             (Test7: block length = 6336),
             (Test8: block length = 7040),
             (Test9: block length = 7744),
             (Test10: block length = 8448)</desc>
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --phy_simulators  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec> $OPENAIR_DIR/targets/bin/ldpctest.Rel15</main_exec>
      <main_exec_args>-l3872 -s10 -n100
                      -l4224 -s10 -n100
		      -l4576 -s10 -n100
		      -l4928 -s10 -n100
		      -l5280 -s10 -n100
		      -l5632 -s10 -n100
		      -l6336 -s10 -n100
		      -l7040 -s10 -n100
		      -l7744 -s10 -n100
1029
		      -l8448 -s10 -n100</main_exec_args>
1030
      <tags>ldpctest.test1 ldpctest.test2 ldpctest.test3 ldpctest.test4 ldpctest.test5 ldpctest.test6 ldpctest.test7 ldpctest.test8 ldpctest.test9 ldpctest.test10</tags>
1031
1032
1033
1034
      <search_expr_true>BLER 0.000000</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1035
1036
1037

    <testCase id="015103">
      <class>execution</class>
1038
1039
      <desc>polartest Test cases. (Test1: PBCH polar test),
                                  (Test2: DCI polar test)</desc>
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1040
1041
1042
1043
1044
1045
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --phy_simulators  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec> $OPENAIR_DIR/targets/bin/polartest.Rel15</main_exec>
1046
1047
      <main_exec_args>-q -s-10 -f0
                      -q -s-10 -f0 -m1</main_exec_args>
1048
      <tags>polartest.test1</tags>
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1049
1050
1051
      <search_expr_true>BLER= 0.000000</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
1052
1053
1054
1055
    </testCase>

     <testCase id="015104">
      <class>execution</class>
1056
1057
1058
1059
      <desc>nr_pbchsim Test cases. (Test1: PBCH-only, 106 PRB),
                                   (Test2: PBCH and synchronization, 106PBR),
                                   (Test3: PBCH-only, 217 PRB),
                                   (Test4: PBCH and synchronization, 217 RPB),
1060
1061
                                   (Test5: PBCH-only, 273 PRB),
                                   (Test6: PBCH and synchronization, 273 PRB)</desc>