Commit 7090357e authored by Raphael Defosseux's avatar Raphael Defosseux

CI: Adding scenarios for COTS-UE

Signed-off-by: Raphael Defosseux's avatarRaphael Defosseux <raphael.defosseux@eurecom.fr>
parent 6a9c5884
......@@ -176,6 +176,8 @@ pipeline {
// Putting the adaptation parameters for the OAI UE
sh "ssh -t inria_oaici@faraday.inria.fr 'scp /home/inria_oaici/for-ci/adapt_usim_parameters_${r2labUE0}.sed ${fituser}@${r2labUE0}:/tmp/adapt_usim_parameters.sed'"
sh "ssh -t inria_oaici@faraday.inria.fr 'scp /home/inria_oaici/for-ci/phones_list.txt ${fituser}@${r2labEPC0}:/tmp'"
sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S cp /tmp/phones_list.txt /etc/ci\"'"
// Out of rload, the sub-network-interfaces are not up
sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S ifconfig control:m11 172.16.1.102 up\"'"
......
......@@ -614,10 +614,10 @@ class SSHConnection():
logging.debug('Using the OAI EPC Release 14 Cassandra-based HSS')
self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S mkdir -p logs', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f hss.log logs/hss*.* ping*.log iperf*.log', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f hss_' + self.testCase_id + '.log logs/hss*.*', '\$', 5)
self.command('echo "oai_hss -j /usr/local/etc/oai/hss_rel14.json" > ./my-hss.sh', '\$', 5)
self.command('chmod 755 ./my-hss.sh', '\$', 5)
self.command('sudo daemon --unsafe --name=hss_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/hss.log ./my-hss.sh', '\$', 5)
self.command('sudo daemon --unsafe --name=hss_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/hss_' + self.testCase_id + '.log ./my-hss.sh', '\$', 5)
elif re.match('OAI', self.EPCType, re.IGNORECASE):
logging.debug('Using the OAI EPC HSS')
self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
......@@ -644,10 +644,10 @@ class SSHConnection():
if re.match('OAI-Rel14-CUPS', self.EPCType, re.IGNORECASE):
logging.debug('Using the OAI EPC Release 14 MME')
self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f mme.log', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f mme_' + self.testCase_id + '.log', '\$', 5)
self.command('echo "./run_mme --config-file /usr/local/etc/oai/mme.conf --set-virt-if" > ./my-mme.sh', '\$', 5)
self.command('chmod 755 ./my-mme.sh', '\$', 5)
self.command('sudo daemon --unsafe --name=mme_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/mme.log ./my-mme.sh', '\$', 5)
self.command('sudo daemon --unsafe --name=mme_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/mme_' + self.testCase_id + '.log ./my-mme.sh', '\$', 5)
elif re.match('OAI', self.EPCType, re.IGNORECASE):
self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
self.command('source oaienv', '\$', 5)
......@@ -675,14 +675,14 @@ class SSHConnection():
if re.match('OAI-Rel14-CUPS', self.EPCType, re.IGNORECASE):
logging.debug('Using the OAI EPC Release 14 SPGW-CUPS')
self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f spgwc.log spgwu.log', '\$', 5)
self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f spgwc_' + self.testCase_id + '.log spgwu_' + self.testCase_id + '.log', '\$', 5)
self.command('echo "spgwc -c /usr/local/etc/oai/spgw_c.conf" > ./my-spgwc.sh', '\$', 5)
self.command('chmod 755 ./my-spgwc.sh', '\$', 5)
self.command('sudo daemon --unsafe --name=spgwc_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/spgwc.log ./my-spgwc.sh', '\$', 5)
self.command('sudo daemon --unsafe --name=spgwc_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/spgwc_' + self.testCase_id + '.log ./my-spgwc.sh', '\$', 5)
time.sleep(5)
self.command('echo "spgwu -c /usr/local/etc/oai/spgw_u.conf" > ./my-spgwu.sh', '\$', 5)
self.command('chmod 755 ./my-spgwu.sh', '\$', 5)
self.command('sudo daemon --unsafe --name=spgwu_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/spgwu.log ./my-spgwu.sh', '\$', 5)
self.command('sudo daemon --unsafe --name=spgwu_daemon --chdir=' + self.EPCSourceCodePath + '/scripts -o ' + self.EPCSourceCodePath + '/scripts/spgwu_' + self.testCase_id + '.log ./my-spgwu.sh', '\$', 5)
elif re.match('OAI', self.EPCType, re.IGNORECASE):
self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
self.command('source oaienv', '\$', 5)
......@@ -1308,9 +1308,9 @@ class SSHConnection():
count = max_count
while count > 0:
if self.ADBCentralized:
self.command('stdbuf -o0 adb -s ' + device_id + ' shell "dumpsys telephony.registry" | grep mDataConnectionState', '\$', 15)
self.command('stdbuf -o0 adb -s ' + device_id + ' shell "dumpsys telephony.registry" | grep -m 1 mDataConnectionState', '\$', 15)
else:
self.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' \'adb -s ' + device_id + ' shell "dumpsys telephony.registry"\' | grep mDataConnectionState', '\$', 60)
self.command('ssh ' + self.UEDevicesRemoteUser[idx] + '@' + self.UEDevicesRemoteServer[idx] + ' \'adb -s ' + device_id + ' shell "dumpsys telephony.registry"\' | grep -m 1 mDataConnectionState', '\$', 60)
result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', str(self.ssh.before))
if result is None:
logging.debug('\u001B[1;37;41m mDataConnectionState Not Found! \u001B[0m')
......
......@@ -21,8 +21,8 @@
-->
<testCaseList>
<htmlTabRef>build-tab</htmlTabRef>
<htmlTabName>Build</htmlTabName>
<htmlTabRef>epc-start-oai-ue</htmlTabRef>
<htmlTabName>EPC-Start-OAI-UE</htmlTabName>
<htmlTabIcon>log-in</htmlTabIcon>
<TestCaseRequestedList>
050101 000001 060101 000001 070101
......
......@@ -21,8 +21,8 @@
-->
<testCaseList>
<htmlTabRef>test-05-tm1</htmlTabRef>
<htmlTabName>Test-05MHz-TM1</htmlTabName>
<htmlTabRef>test-05-tm1-oai-ue</htmlTabRef>
<htmlTabName>Test-05MHz-TM1-OAI-UE</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<repeatCount>4</repeatCount>
<TestCaseRequestedList>
......
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>epc-start</htmlTabRef>
<htmlTabName>EPC-Start</htmlTabName>
<htmlTabIcon>log-in</htmlTabIcon>
<TestCaseRequestedList>
050102 000001 060102 000001 070102
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="000001">
<class>IdleSleep</class>
<desc>Sleep</desc>
<idle_sleep_time_in_sec>20</idle_sleep_time_in_sec>
</testCase>
<testCase id="050102">
<class>Initialize_HSS</class>
<desc>Initialize HSS</desc>
</testCase>
<testCase id="060102">
<class>Initialize_MME</class>
<desc>Initialize MME</desc>
</testCase>
<testCase id="070102">
<class>Initialize_SPGW</class>
<desc>Initialize SPGW</desc>
</testCase>
</testCaseList>
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>epc-stop</htmlTabRef>
<htmlTabName>EPC-Stop</htmlTabName>
<htmlTabIcon>log-out</htmlTabIcon>
<TestCaseRequestedList>
050201 060201 070201
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="050201">
<class>Terminate_HSS</class>
<desc>Terminate HSS</desc>
</testCase>
<testCase id="060201">
<class>Terminate_MME</class>
<desc>Terminate MME</desc>
</testCase>
<testCase id="070201">
<class>Terminate_SPGW</class>
<desc>Terminate SPGW</desc>
</testCase>
</testCaseList>
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>test-05-tm1</htmlTabRef>
<htmlTabName>Test-05MHz-TM1</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<repeatCount>4</repeatCount>
<TestCaseRequestedList>
030201
030102 000002 040301 000002 040504 000001 040401 000002 030201
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="000001">
<class>IdleSleep</class>
<desc>Sleep for 10 sec</desc>
<idle_sleep_time_in_sec>10</idle_sleep_time_in_sec>
</testCase>
<testCase id="000002">
<class>IdleSleep</class>
<desc>Sleep for 3 sec</desc>
<idle_sleep_time_in_sec>3</idle_sleep_time_in_sec>
</testCase>
<testCase id="030102">
<class>Initialize_eNB</class>
<desc>Initialize eNB (FDD/Band7/5MHz)</desc>
<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf --eNBs.[0].rrc_inactivity_threshold 0 --RUs.[0].max_rxgain 120 --eNBs.[0].component_carriers.[0].pusch_p0_Nominal -90 --eNBs.[0].component_carriers.[0].pucch_p0_Nominal -96 --eNBs.[0].tracking_area_code 600 --eNBs.[0].plmn_list.[0].mnc 95 --THREAD_STRUCT.[0].parallel_config PARALLEL_RU_L1_TRX_SPLIT</Initialize_eNB_args>
</testCase>
<testCase id="030201">
<class>Terminate_eNB</class>
<desc>Terminate eNB</desc>
</testCase>
<testCase id="040301">
<class>Attach_UE</class>
<desc>Attach UE</desc>
</testCase>
<testCase id="040401">
<class>Detach_UE</class>
<desc>Detach UE</desc>
</testCase>
<testCase id="040504">
<class>Ping</class>
<desc>ping (5MHz - 20 sec)</desc>
<ping_args>-I 192.168.248.159 -c 20</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="040603">
<class>Iperf</class>
<desc>iperf (5MHz - DL/1Mbps/UDP)(30 sec)</desc>
<iperf_args>-u -b 1M -t 30 -i 1 -fm</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
</testCase>
<testCase id="040604">
<class>Iperf</class>
<desc>iperf (5MHz - DL/12Mbps/UDP)(30 sec)</desc>
<iperf_args>-u -b 12M -t 30 -i 1 -fm</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
</testCase>
<testCase id="040643">
<class>Iperf</class>
<desc>iperf (5MHz - UL/1Mbps/UDP)(30 sec)</desc>
<iperf_args>-u -b 1M -t 30 -i 1 -fm -R</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
</testCase>
<testCase id="040644">
<class>Iperf</class>
<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)</desc>
<iperf_args>-u -b 2M -t 30 -i 1 -fm -R</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
</testCase>
</testCaseList>
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment