hw-sw-reqs.md

@@ -5,25 +5,26 @@ In the following, we provide requirements and/or supported configurations that a
 OAI information on [Hardware requirements, duplexers, and tested systems](https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/OpenAirSystemRequirements) | [SIM cards and phones](https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/SimCardConfig)
 
 The Mosaic5G group uses or recommends the following hardware:
-* computers: We made good experiences with the [Gigabyte GB-BRi7-8550](https://www.gigabyte.com/Mini-PcBarebone/GB-BRi7-8550-rev-10).
-* SDRs Ettus [USRP B210](https://www.ettus.com/product/details/UB210-KIT), [USRP B200-mini](https://www.ettus.com/product/details/USRP-B200mini)
-* Duplexer: a duplexer for LTE band 7 can be found at [open-cells](https://open-cells.com/index.php/opencellsband7duplexer/)
-* Antenna for band 7, e.g. [from
-  here](https://shop.rfwel.com/hepta-band-7-band-omni-antena.html) or [this
-  one](https://shop.rfwel.com/2-4-2-5-3-5-ghz-wifi-lte-rubber-duck-antenna-with-rp-sma-connector/)
-* We use the phones Google/Huawei Nexus 6P, Google Pixel 2. Other tested phones
+* Computers: [Gigabyte GB-BRi7-8550](https://www.gigabyte.com/Mini-PcBarebone/GB-BRi7-8550-rev-10).
+* SDRs Ettus: [USRP B210](https://www.ettus.com/product/details/UB210-KIT), [USRP B200-mini](https://www.ettus.com/product/details/USRP-B200mini)
+* Duplexers: a duplexer for LTE band 7 can be found at [open-cells](https://open-cells.com/index.php/opencellsband7duplexer/)
+* Antennas: for band 7, e.g., [see
+  here](https://shop.rfwel.com/hepta-band-7-band-omni-antena.html) or [here
+  ](https://shop.rfwel.com/2-4-2-5-3-5-ghz-wifi-lte-rubber-duck-antenna-with-rp-sma-connector/)
+* Mobile phones: Google/Huawei Nexus 6P, Google Pixel 2. Other tested phones
   include Samsung Galaxy 5 & 6. Others might work (also different UE
   categories).
 * You might need at least 2 SMA cables to connect the SDR and the duplexer.
 
 Other optional hardware:
-* Synchronization modules: either GPS (e,g. GPS module in USRP) or 1588v2
+* Synchronization modules: either GPS (e.g., [GPS module in
+  USRP](https://www.ettus.com/product/details/GPSDO-TCXO-MODULE)) or 1588v2
   master and client module.
-* A Faraday cage: [from
+* Faraday cage: [see
   here](https://www.lbagroup.com/products/faraday-cage-rf-shielding-enclosure) or
   [here](http://ramseytest.com/product_list.php?category=1)
-* A [USRP
-  enclosure](http://www.ettus.com/product/details/USRP-B200-Enclosure).
+* [USRP
+  enclosure kit](http://www.ettus.com/product/details/USRP-B200-Enclosure).
 
 Other SDRs might work but we do not test on them:
 * [USRP X3xx](https://www.ettus.com/product/category/USRP-X-Series) or [USRP
@@ -36,13 +37,11 @@ Other SDRs might work but we do not test on them:
 # Software requirements
 
 * LL-MEC requires kernel 4.9 as documented in [its wiki](https://gitlab.eurecom.fr/mosaic5g/ll-mec/wikis/home).
-* The CN without LL-MEC from snap has no special kernel dependencies. Some issues with kernel 4.15 have been observed and fixed.
+* The CN without LL-MEC on snap has no special kernel dependencies. Some issues with kernel 4.15 have been observed and fixed.
 * RAN & FlexRAN have no special kernel requirements.
 
 * All projects have additional library dependencies that are installed through installation scripts. See the respective documentation for more information.
 
 # Supported Mosaic5G snap versions
 
-If not announced otherwise, we recommend staying up to date with the respective snap versions of all projects. To update a snap, simpy run the `./build_m5g` script with the respective switch, e.g. to update the core network, simply run `./build_m5g -C`.
-
-SLICENET information: the tested configuration is **TBD**
+If not announced otherwise, we recommend staying up to date with the respective snap versions of all projects. To update a snap, simply run the `./build_m5g` script with the respective switch, e.g., to update the core network, simply run `./build_m5g -C`.