Commit 7c0b6fcf authored by kaltenbe's avatar kaltenbe

bugfix: TDD was generating DL signal in UL portion of special subframe


git-svn-id: http://svn.eurecom.fr/openair4G/trunk@7602 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 7b999b74
......@@ -172,10 +172,6 @@ int32_t remove_ue(uint16_t rnti, PHY_VARS_eNB *phy_vars_eNB, uint8_t abstraction
{
uint8_t i;
#ifdef DEBUG_PHY_PROC
LOG_I(PHY,"eNB %d removing UE with rnti %x\n",phy_vars_eNB->Mod_id,rnti);
#endif
for (i=0; i<NUMBER_OF_UE_MAX; i++) {
if ((phy_vars_eNB->dlsch_eNB[i]==NULL) || (phy_vars_eNB->ulsch_eNB[i]==NULL)) {
MSC_LOG_EVENT(MSC_PHY_ENB, "0 Failed remove ue %"PRIx16" (ENOMEM)", rnti);
......@@ -184,6 +180,9 @@ int32_t remove_ue(uint16_t rnti, PHY_VARS_eNB *phy_vars_eNB, uint8_t abstraction
} else {
if (phy_vars_eNB->eNB_UE_stats[i].crnti==rnti) {
MSC_LOG_EVENT(MSC_PHY_ENB, "0 Removed ue %"PRIx16" ", rnti);
#ifdef DEBUG_PHY_PROC
LOG_I(PHY,"eNB %d removing UE %d with rnti %x\n",phy_vars_eNB->Mod_id,i,rnti);
#endif
//msg("[PHY] UE_id %d\n",i);
clean_eNb_dlsch(phy_vars_eNB->dlsch_eNB[i][0], abstraction_flag);
clean_eNb_ulsch(phy_vars_eNB->ulsch_eNB[i],abstraction_flag);
......@@ -1521,10 +1520,12 @@ void phy_procedures_eNB_TX(unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_e
phy_vars_eNB->lte_eNB_common_vars.txdataF[0],
AMP,
subframe<<1,0);
generate_pilots_slot(phy_vars_eNB,
phy_vars_eNB->lte_eNB_common_vars.txdataF[0],
AMP,
(subframe<<1)+1,0);
if (subframe_select(&phy_vars_eNB->lte_frame_parms,subframe) == SF_DL)
generate_pilots_slot(phy_vars_eNB,
phy_vars_eNB->lte_eNB_common_vars.txdataF[0],
AMP,
(subframe<<1)+1,0);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_ENB_RS_TX,0);
// First half of PSS/SSS (FDD)
......@@ -3114,11 +3115,12 @@ void prach_procedures(PHY_VARS_eNB *phy_vars_eNB,uint8_t sched_subframe,uint8_t
phy_vars_eNB->eNB_UE_stats[(uint32_t)UE_id].UE_timing_offset = preamble_delay_list[preamble_max]&0x1FFF; //limit to 13 (=11+2) bits
//phy_vars_eNb->eNB_UE_stats[(uint32_t)UE_id].mode = PRACH;
phy_vars_eNB->eNB_UE_stats[(uint32_t)UE_id].sector = 0;
LOG_I(PHY,"[eNB %d/%d][RAPROC] Frame %d, subframe %d Initiating RA procedure with preamble %d, energy %d.%d dB, delay %d\n",
LOG_I(PHY,"[eNB %d/%d][RAPROC] Frame %d, subframe %d Initiating RA procedure (UE_id %d) with preamble %d, energy %d.%d dB, delay %d\n",
phy_vars_eNB->Mod_id,
phy_vars_eNB->CC_id,
frame,
subframe,
UE_id,
preamble_max,
preamble_energy_max/10,
preamble_energy_max%10,
......@@ -3361,9 +3363,9 @@ void phy_procedures_eNB_RX(const unsigned char sched_subframe,PHY_VARS_eNB *phy_
round = phy_vars_eNB->ulsch_eNB[i]->harq_processes[harq_pid]->round;
#ifdef DEBUG_PHY_PROC
LOG_D(PHY,"[eNB %d][PUSCH %d] frame %d subframe %d Scheduling PUSCH/ULSCH Reception for rnti %x\n",
LOG_D(PHY,"[eNB %d][PUSCH %d] frame %d subframe %d Scheduling PUSCH/ULSCH Reception for rnti %x (UE_id %d)\n",
phy_vars_eNB->Mod_id,harq_pid,
frame,subframe,phy_vars_eNB->ulsch_eNB[i]->rnti);
frame,subframe,phy_vars_eNB->ulsch_eNB[i]->rnti,i);
#endif
#ifdef DEBUG_PHY_PROC
......@@ -3549,6 +3551,20 @@ void phy_procedures_eNB_RX(const unsigned char sched_subframe,PHY_VARS_eNB *phy_
phy_vars_eNB->ulsch_eNB[i]->harq_processes[harq_pid]->round-1,
phy_vars_eNB->lte_frame_parms.maxHARQ_Msg3Tx-1);
LOG_I(PHY,"[eNB %d][PUSCH %d] frame %d subframe %d RNTI %x RX power (%d,%d) RSSI (%d,%d) N0 (%d,%d) dB ACK (%d,%d), decoding iter %d\n",
phy_vars_eNB->Mod_id,harq_pid,
frame,subframe,
phy_vars_eNB->ulsch_eNB[i]->rnti,
dB_fixed(phy_vars_eNB->lte_eNB_pusch_vars[i]->ulsch_power[0]),
dB_fixed(phy_vars_eNB->lte_eNB_pusch_vars[i]->ulsch_power[1]),
phy_vars_eNB->eNB_UE_stats[i].UL_rssi[0],
phy_vars_eNB->eNB_UE_stats[i].UL_rssi[1],
phy_vars_eNB->PHY_measurements_eNB->n0_power_dB[0],
phy_vars_eNB->PHY_measurements_eNB->n0_power_dB[1],
phy_vars_eNB->ulsch_eNB[i]->harq_processes[harq_pid]->o_ACK[0],
phy_vars_eNB->ulsch_eNB[i]->harq_processes[harq_pid]->o_ACK[1],
ret);
if (phy_vars_eNB->ulsch_eNB[i]->harq_processes[harq_pid]->round ==
phy_vars_eNB->lte_frame_parms.maxHARQ_Msg3Tx) {
LOG_I(PHY,"[eNB %d][RAPROC] maxHARQ_Msg3Tx reached, abandoning RA procedure for UE %d\n",
......@@ -3636,10 +3652,24 @@ void phy_procedures_eNB_RX(const unsigned char sched_subframe,PHY_VARS_eNB *phy_
}
} // ulsch in error
else {
LOG_D(PHY,"[eNB %d][PUSCH %d] Frame %d subframe %d ULSCH received, setting round to 0, PHICH ACK\n",
phy_vars_eNB->Mod_id,harq_pid,
frame,subframe);
if (phy_vars_eNB->ulsch_eNB[i]->Msg3_flag == 1) {
LOG_I(PHY,"[eNB %d][PUSCH %d] Frame %d subframe %d ULSCH received, setting round to 0, PHICH ACK\n",
phy_vars_eNB->Mod_id,harq_pid,
frame,subframe);
LOG_I(PHY,"[eNB %d][PUSCH %d] frame %d subframe %d RNTI %x RX power (%d,%d) RSSI (%d,%d) N0 (%d,%d) dB ACK (%d,%d), decoding iter %d\n",
phy_vars_eNB->Mod_id,harq_pid,
frame,subframe,
phy_vars_eNB->ulsch_eNB[i]->rnti,
dB_fixed(phy_vars_eNB->lte_eNB_pusch_vars[i]->ulsch_power[0]),
dB_fixed(phy_vars_eNB->lte_eNB_pusch_vars[i]->ulsch_power[1]),
phy_vars_eNB->eNB_UE_stats[i].UL_rssi[0],
phy_vars_eNB->eNB_UE_stats[i].UL_rssi[1],
phy_vars_eNB->PHY_measurements_eNB->n0_power_dB[0],
phy_vars_eNB->PHY_measurements_eNB->n0_power_dB[1],
phy_vars_eNB->ulsch_eNB[i]->harq_processes[harq_pid]->o_ACK[0],
phy_vars_eNB->ulsch_eNB[i]->harq_processes[harq_pid]->o_ACK[1],
ret);
}
#if defined(MESSAGE_CHART_GENERATOR_PHY)
MSC_LOG_RX_MESSAGE(
MSC_PHY_ENB,MSC_PHY_UE,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment