ark3116.c 12 KB
Newer Older
1
/*
2 3 4
 * Copyright (C) 2006
 *   Simon Schulz (ark3116_driver <at> auctionant.de)
 *
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
 * ark3116
 * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
 *   productid=0x0232) (used in a datacable called KQ-U8A)
 *
 * - based on code by krisfx -> thanks !!
 *   (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457)
 *
 *  - based on logs created by usbsnoopy
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
25
#include <linux/usb/serial.h>
26 27
#include <linux/serial.h>
#include <asm/uaccess.h>
28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48


static int debug;

static struct usb_device_id id_table [] = {
	{ USB_DEVICE(0x6547, 0x0232) },
	{ },
};
MODULE_DEVICE_TABLE(usb, id_table);

struct ark3116_private {
	spinlock_t lock;
	u8 termios_initialized;
};

static inline void ARK3116_SND(struct usb_serial *serial, int seq,
			       __u8 request, __u8 requesttype,
			       __u16 value, __u16 index)
{
	int result;
	result = usb_control_msg(serial->dev,
49
				 usb_sndctrlpipe(serial->dev, 0),
50
				 request, requesttype, value, index,
51 52
				 NULL, 0x00, 1000);
	dbg("%03d > ok", seq);
53 54 55 56 57 58 59 60 61
}

static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
			       __u8 request, __u8 requesttype,
			       __u16 value, __u16 index, __u8 expected,
			       char *buf)
{
	int result;
	result = usb_control_msg(serial->dev,
62 63 64
				 usb_rcvctrlpipe(serial->dev, 0),
				 request, requesttype, value, index,
				 buf, 0x0000001, 1000);
65
	if (result)
66 67
		dbg("%03d < %d bytes [0x%02X]", seq, result,
		    ((unsigned char *)buf)[0]);
68 69 70 71 72 73 74 75 76
	else
		dbg("%03d < 0 bytes", seq);
}

static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
				     __u8 request, __u8 requesttype,
				     __u16 value, __u16 index, char *buf)
{
	usb_control_msg(serial->dev,
77
			usb_rcvctrlpipe(serial->dev, 0),
78 79 80 81 82 83 84 85 86 87 88
			request, requesttype, value, index,
			buf, 0x0000001, 1000);
}

static int ark3116_attach(struct usb_serial *serial)
{
	char *buf;
	struct ark3116_private *priv;
	int i;

	for (i = 0; i < serial->num_ports; ++i) {
89
		priv = kzalloc(sizeof(struct ark3116_private), GFP_KERNEL);
90 91 92 93 94 95 96 97 98
		if (!priv)
			goto cleanup;
		spin_lock_init(&priv->lock);

		usb_set_serial_port_data(serial->port[i], priv);
	}

	buf = kmalloc(1, GFP_KERNEL);
	if (!buf) {
99
		dbg("error kmalloc -> out of mem?");
100 101 102 103
		goto cleanup;
	}

	/* 3 */
104 105 106 107
	ARK3116_SND(serial, 3, 0xFE, 0x40, 0x0008, 0x0002);
	ARK3116_SND(serial, 4, 0xFE, 0x40, 0x0008, 0x0001);
	ARK3116_SND(serial, 5, 0xFE, 0x40, 0x0000, 0x0008);
	ARK3116_SND(serial, 6, 0xFE, 0x40, 0x0000, 0x000B);
108 109

	/* <-- seq7 */
110 111 112 113 114
	ARK3116_RCV(serial,  7, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
	ARK3116_SND(serial,  8, 0xFE, 0x40, 0x0080, 0x0003);
	ARK3116_SND(serial,  9, 0xFE, 0x40, 0x001A, 0x0000);
	ARK3116_SND(serial, 10, 0xFE, 0x40, 0x0000, 0x0001);
	ARK3116_SND(serial, 11, 0xFE, 0x40, 0x0000, 0x0003);
115 116

	/* <-- seq12 */
117 118
	ARK3116_RCV(serial, 12, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
	ARK3116_SND(serial, 13, 0xFE, 0x40, 0x0000, 0x0004);
119 120

	/* 14 */
121 122
	ARK3116_RCV(serial, 14, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
	ARK3116_SND(serial, 15, 0xFE, 0x40, 0x0000, 0x0004);
123 124

	/* 16 */
125
	ARK3116_RCV(serial, 16, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
126
	/* --> seq17 */
127
	ARK3116_SND(serial, 17, 0xFE, 0x40, 0x0001, 0x0004);
128 129

	/* <-- seq18 */
130
	ARK3116_RCV(serial, 18, 0xFE, 0xC0, 0x0000, 0x0004, 0x01, buf);
131 132

	/* --> seq19 */
133
	ARK3116_SND(serial, 19, 0xFE, 0x40, 0x0003, 0x0004);
134 135

	/* <-- seq20 */
136 137 138 139 140 141 142 143 144 145 146 147 148
	/* seems like serial port status info (RTS, CTS, ...) */
	/* returns modem control line status?! */
	ARK3116_RCV(serial, 20, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf);

	/* set 9600 baud & do some init?! */
	ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003);
	ARK3116_SND(serial, 148, 0xFE, 0x40, 0x0038, 0x0000);
	ARK3116_SND(serial, 149, 0xFE, 0x40, 0x0001, 0x0001);
	ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003);
	ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
	ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003);
	ARK3116_RCV(serial, 153, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
	ARK3116_SND(serial, 154, 0xFE, 0x40, 0x0003, 0x0003);
149 150

	kfree(buf);
151
	return 0;
152 153

cleanup:
154
	for (--i; i >= 0; --i)
155 156 157 158 159
		usb_set_serial_port_data(serial->port[i], NULL);
	return -ENOMEM;
}

static void ark3116_set_termios(struct usb_serial_port *port,
Alan Cox's avatar
Alan Cox committed
160
				struct ktermios *old_termios)
161 162 163
{
	struct usb_serial *serial = port->serial;
	struct ark3116_private *priv = usb_get_serial_port_data(port);
164 165
	struct ktermios *termios = port->tty->termios;
	unsigned int cflag = termios->c_cflag;
166 167 168 169 170 171 172 173 174 175 176 177 178
	unsigned long flags;
	int baud;
	int ark3116_baud;
	char *buf;
	char config;

	config = 0;

	dbg("%s - port %d", __FUNCTION__, port->number);

	spin_lock_irqsave(&priv->lock, flags);
	if (!priv->termios_initialized) {
		*(port->tty->termios) = tty_std_termios;
179 180
		port->tty->termios->c_cflag = B9600 | CS8
					      | CREAD | HUPCL | CLOCAL;
181 182
		termios->c_ispeed = 9600;
		termios->c_ospeed = 9600;
183 184 185 186
		priv->termios_initialized = 1;
	}
	spin_unlock_irqrestore(&priv->lock, flags);

187 188
	cflag = termios->c_cflag;
	termios->c_cflag &= ~(CMSPAR|CRTSCTS);
189 190 191 192 193 194 195 196

	buf = kmalloc(1, GFP_KERNEL);
	if (!buf) {
		dbg("error kmalloc");
		return;
	}

	/* set data bit count (8/7/6/5) */
197 198
	if (cflag & CSIZE) {
		switch (cflag & CSIZE) {
199 200 201 202 203 204 205 206 207 208 209 210 211
		case CS5:
			config |= 0x00;
			dbg("setting CS5");
			break;
		case CS6:
			config |= 0x01;
			dbg("setting CS6");
			break;
		case CS7:
			config |= 0x02;
			dbg("setting CS7");
			break;
		default:
212
			dbg("CSIZE was set but not CS5-CS8, using CS8!");
213
			/* fall through */
214 215 216 217 218 219 220
		case CS8:
			config |= 0x03;
			dbg("setting CS8");
			break;
		}
	}

221 222
	/* set parity (NONE/EVEN/ODD) */
	if (cflag & PARENB) {
223 224 225 226 227 228 229 230 231 232 233
		if (cflag & PARODD) {
			config |= 0x08;
			dbg("setting parity to ODD");
		} else {
			config |= 0x18;
			dbg("setting parity to EVEN");
		}
	} else {
		dbg("setting parity to NONE");
	}

234
	/* set stop bit (1/2) */
235 236
	if (cflag & CSTOPB) {
		config |= 0x04;
237
		dbg("setting 2 stop bits");
238
	} else {
239
		dbg("setting 1 stop bit");
240 241
	}

242
	/* set baudrate */
243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260
	baud = tty_get_baud_rate(port->tty);

	switch (baud) {
		case 75:
		case 150:
		case 300:
		case 600:
		case 1200:
		case 1800:
		case 2400:
		case 4800:
		case 9600:
		case 19200:
		case 38400:
		case 57600:
		case 115200:
		case 230400:
		case 460800:
261 262
			/* Report the resulting rate back to the caller */
			tty_encode_baud_rate(port->tty, baud, baud);
263
			break;
264
		/* set 9600 as default (if given baudrate is invalid for example) */
265
		default:
266 267
			tty_encode_baud_rate(port->tty, 9600, 9600);
		case 0:
268
			baud = 9600;
269 270 271 272
	}

	/*
	 * found by try'n'error, be careful, maybe there are other options
273
	 * for multiplicator etc! (3.5 for example)
274 275 276
	 */
	if (baud == 460800)
		/* strange, for 460800 the formula is wrong
277
		 * if using round() then 9600baud is wrong) */
278 279 280 281 282
		ark3116_baud = 7;
	else
		ark3116_baud = 3000000 / baud;

	/* ? */
283 284
	ARK3116_RCV(serial, 0, 0xFE, 0xC0, 0x0000, 0x0003, 0x03, buf);

285 286
	/* offset = buf[0]; */
	/* offset = 0x03; */
287
	/* dbg("using 0x%04X as target for 0x0003:", 0x0080 + offset); */
288 289

	/* set baudrate */
290 291 292 293 294 295 296
	dbg("setting baudrate to %d (->reg=%d)", baud, ark3116_baud);
	ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003);
	ARK3116_SND(serial, 148, 0xFE, 0x40,
			    (ark3116_baud & 0x00FF), 0x0000);
	ARK3116_SND(serial, 149, 0xFE, 0x40,
			    (ark3116_baud & 0xFF00) >> 8, 0x0001);
	ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003);
297 298

	/* ? */
299 300
	ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
	ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003);
301 302 303

	/* set data bit count, stop bit count & parity: */
	dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
304 305
	ARK3116_RCV(serial, 153, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
	ARK3116_SND(serial, 154, 0xFE, 0x40, config, 0x0003);
306 307

	if (cflag & CRTSCTS)
308
		dbg("CRTSCTS not supported by chipset?!");
309

310
	/* TEST ARK3116_SND(154, 0xFE, 0x40, 0xFFFF, 0x0006); */
311 312

	kfree(buf);
313

314 315 316 317 318
	return;
}

static int ark3116_open(struct usb_serial_port *port, struct file *filp)
{
Alan Cox's avatar
Alan Cox committed
319
	struct ktermios tmp_termios;
320 321 322 323
	struct usb_serial *serial = port->serial;
	char *buf;
	int result = 0;

324
	dbg("%s - port %d", __FUNCTION__, port->number);
325 326 327

	buf = kmalloc(1, GFP_KERNEL);
	if (!buf) {
328
		dbg("error kmalloc -> out of mem?");
329 330 331 332 333
		return -ENOMEM;
	}

	result = usb_serial_generic_open(port, filp);
	if (result)
Oliver Neukum's avatar
Oliver Neukum committed
334
		goto err_out;
335 336

	/* open */
337
	ARK3116_RCV(serial, 111, 0xFE, 0xC0, 0x0000, 0x0003, 0x02, buf);
338

339 340 341 342
	ARK3116_SND(serial, 112, 0xFE, 0x40, 0x0082, 0x0003);
	ARK3116_SND(serial, 113, 0xFE, 0x40, 0x001A, 0x0000);
	ARK3116_SND(serial, 114, 0xFE, 0x40, 0x0000, 0x0001);
	ARK3116_SND(serial, 115, 0xFE, 0x40, 0x0002, 0x0003);
343

344 345
	ARK3116_RCV(serial, 116, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
	ARK3116_SND(serial, 117, 0xFE, 0x40, 0x0002, 0x0004);
346

347 348
	ARK3116_RCV(serial, 118, 0xFE, 0xC0, 0x0000, 0x0004, 0x02, buf);
	ARK3116_SND(serial, 119, 0xFE, 0x40, 0x0000, 0x0004);
349

350
	ARK3116_RCV(serial, 120, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
351

352
	ARK3116_SND(serial, 121, 0xFE, 0x40, 0x0001, 0x0004);
353

354
	ARK3116_RCV(serial, 122, 0xFE, 0xC0, 0x0000, 0x0004, 0x01, buf);
355

356
	ARK3116_SND(serial, 123, 0xFE, 0x40, 0x0003, 0x0004);
357

358 359
	/* returns different values (control lines?!) */
	ARK3116_RCV(serial, 124, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf);
360

361
	/* initialise termios */
362 363 364
	if (port->tty)
		ark3116_set_termios(port, &tmp_termios);

Oliver Neukum's avatar
Oliver Neukum committed
365
err_out:
366 367 368 369 370 371 372 373
	kfree(buf);

	return result;
}

static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
			 unsigned int cmd, unsigned long arg)
{
374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399
	struct serial_struct serstruct;
	void __user *user_arg = (void __user *)arg;

	switch (cmd) {
	case TIOCGSERIAL:
		/* XXX: Some of these values are probably wrong. */
		memset(&serstruct, 0, sizeof (serstruct));
		serstruct.type = PORT_16654;
		serstruct.line = port->serial->minor;
		serstruct.port = port->number;
		serstruct.custom_divisor = 0;
		serstruct.baud_base = 460800;

		if (copy_to_user(user_arg, &serstruct, sizeof (serstruct)))
			return -EFAULT;

		return 0;
	case TIOCSSERIAL:
		if (copy_from_user(&serstruct, user_arg, sizeof (serstruct)))
			return -EFAULT;
		return 0;
	default:
		dbg("%s cmd 0x%04x not supported", __FUNCTION__, cmd);
		break;
	}

400 401 402 403 404 405 406 407 408
	return -ENOIOCTLCMD;
}

static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
{
	struct usb_serial *serial = port->serial;
	char *buf;
	char temp;

409
	/* seems like serial port status info (RTS, CTS, ...) is stored
410 411 412 413 414 415 416 417 418 419 420
	 * in reg(?) 0x0006
	 * pcb connection point 11 = GND -> sets bit4 of response
	 * pcb connection point  7 = GND -> sets bit6 of response
	 */

	buf = kmalloc(1, GFP_KERNEL);
	if (!buf) {
		dbg("error kmalloc");
		return -ENOMEM;
	}

421 422
	/* read register */
	ARK3116_RCV_QUIET(serial, 0xFE, 0xC0, 0x0000, 0x0006, buf);
423 424 425
	temp = buf[0];
	kfree(buf);

426 427
	/* i do not really know if bit4=CTS and bit6=DSR... just a
	 * quick guess!
428
	 */
429 430
	return (temp & (1<<4) ? TIOCM_CTS : 0)
	       | (temp & (1<<6) ? TIOCM_DSR : 0);
431 432 433 434 435 436 437
}

static struct usb_driver ark3116_driver = {
	.name =		"ark3116",
	.probe =	usb_serial_probe,
	.disconnect =	usb_serial_disconnect,
	.id_table =	id_table,
438
	.no_dynamic_id =	1,
439 440 441 442 443 444 445 446
};

static struct usb_serial_driver ark3116_device = {
	.driver = {
		.owner =	THIS_MODULE,
		.name =		"ark3116",
	},
	.id_table =		id_table,
447
	.usb_driver =		&ark3116_driver,
448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484
	.num_interrupt_in =	1,
	.num_bulk_in =		1,
	.num_bulk_out =		1,
	.num_ports =		1,
	.attach =		ark3116_attach,
	.set_termios =		ark3116_set_termios,
	.ioctl =		ark3116_ioctl,
	.tiocmget =		ark3116_tiocmget,
	.open =			ark3116_open,
};

static int __init ark3116_init(void)
{
	int retval;

	retval = usb_serial_register(&ark3116_device);
	if (retval)
		return retval;
	retval = usb_register(&ark3116_driver);
	if (retval)
		usb_serial_deregister(&ark3116_device);
	return retval;
}

static void __exit ark3116_exit(void)
{
	usb_deregister(&ark3116_driver);
	usb_serial_deregister(&ark3116_device);
}

module_init(ark3116_init);
module_exit(ark3116_exit);
MODULE_LICENSE("GPL");

module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");