1. 01 Apr, 2013 1 commit
  2. 12 Mar, 2013 1 commit
    • Chris Boot's avatar
      spi: add driver for BCM2835 · f8043872
      Chris Boot authored
      The BCM2835 contains two forms of SPI master controller (one known
      simply as SPI0, and the other known as the "Universal SPI Master", in
      the auxilliary block) and one form of SPI slave controller. This patch
      adds support for the SPI0 controller.
      This driver is taken from Chris Boot's repository at
      git://github.com/bootc/linux.git rpi-linear
      as of commit 6de2905 "spi-bcm2708: fix printf with spurious %s".
      In the first SPI-related commit there, Chris wrote:
      Thanks to csoutreach / A Robinson for his driver which I used as an
      inspiration. You can find his version here:
      Changes made during upstreaming:
      * Renamed bcm2708 to bcm2835 as per upstream naming for this SoC.
      * Removed support for brcm,realtime property.
      * Increased transfer timeout to 30 seconds.
      * Return IRQ_NONE from the IRQ handler if no interrupt was handled.
      * Disable TA (Transfer Active) and clear FIFOs on a transfer timeout.
      * Wrote device tree binding documentation.
      * Request unnamed clock rather than "sys_pclk"; the DT will provide the
        correct clock.
      * Assume that tfr->speed_hz and tfr->bits_per_word are always set in
        bcm2835_spi_start_transfer(), bcm2835_spi_transfer_one(), so no need
        to check spi->speed_hz or tft->bits_per_word.
      * Re-ordered probe() to remove the need for temporary variables.
      * Call clk_disable_unprepare() rather than just clk_unprepare() on probe()
      * Don't use devm_request_irq(), to ensure that the IRQ doesn't fire after
        we've torn down the device, but not unhooked the IRQ.
      * Moved probe()'s call to clk_prepare_enable() so we can be sure the clock
        is enabled if the IRQ handler fires immediately.
      * Remove redundant checks from bcm2835_spi_check_transfer() and
      * Re-ordered IRQ handler to check for RXR before DONE. Added comments to
      * Removed empty prepare/unprepare implementations.
      * Removed use of devinit/devexit.
      * Added BCM2835_ prefix to defines.
      Signed-off-by: default avatarChris Boot <bootc@bootc.net>
      Signed-off-by: default avatarStephen Warren <swarren@wwwdotorg.org>
      Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>