ssu100.c 18.6 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
/*
 * usb-serial driver for Quatech SSU-100
 *
 * based on ftdi_sio.c and the original serqt_usb.c from Quatech
 *
 */

#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/serial.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
18
#include <linux/serial_reg.h>
19 20 21 22 23 24 25 26 27 28 29 30 31 32
#include <linux/uaccess.h>

#define QT_OPEN_CLOSE_CHANNEL       0xca
#define QT_SET_GET_DEVICE           0xc2
#define QT_SET_GET_REGISTER         0xc0
#define QT_GET_SET_PREBUF_TRIG_LVL  0xcc
#define QT_SET_ATF                  0xcd
#define QT_GET_SET_UART             0xc1
#define QT_TRANSFER_IN              0xc0
#define QT_HW_FLOW_CONTROL_MASK     0xc5
#define QT_SW_FLOW_CONTROL_MASK     0xc6

#define  SERIAL_MSR_MASK            0xf0

33
#define  SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS)
34

35
#define  SERIAL_EVEN_PARITY         (UART_LCR_PARITY | UART_LCR_EPAR)
36 37 38 39 40 41 42 43 44 45 46 47 48

#define  MAX_BAUD_RATE              460800

#define ATC_DISABLED                0x00
#define DUPMODE_BITS        0xc0
#define RR_BITS             0x03
#define LOOPMODE_BITS       0x41
#define RS232_MODE          0x00
#define RTSCTS_TO_CONNECTOR 0x40
#define CLKS_X4             0x02
#define FULLPWRBIT          0x00000080
#define NEXT_BOARD_POWER_BIT        0x00000004

49
static int debug;
50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77

/* Version Information */
#define DRIVER_VERSION "v0.1"
#define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver"

#define	USB_VENDOR_ID_QUATECH	0x061d	/* Quatech VID */
#define QUATECH_SSU100	0xC020	/* SSU100 */

static const struct usb_device_id id_table[] = {
	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)},
	{}			/* Terminating entry */
};

MODULE_DEVICE_TABLE(usb, id_table);


static struct usb_driver ssu100_driver = {
	.name			       = "ssu100",
	.probe			       = usb_serial_probe,
	.disconnect		       = usb_serial_disconnect,
	.id_table		       = id_table,
	.suspend		       = usb_serial_suspend,
	.resume			       = usb_serial_resume,
	.no_dynamic_id		       = 1,
	.supports_autosuspend	       = 1,
};

struct ssu100_port_private {
78
	spinlock_t status_lock;
79 80 81 82
	u8 shadowLSR;
	u8 shadowMSR;
	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
	unsigned short max_packet_size;
83
	struct async_icount icount;
84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130
};

static void ssu100_release(struct usb_serial *serial)
{
	struct ssu100_port_private *priv = usb_get_serial_port_data(*serial->port);

	dbg("%s", __func__);
	kfree(priv);
}

static inline int ssu100_control_msg(struct usb_device *dev,
				     u8 request, u16 data, u16 index)
{
	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
			       request, 0x40, data, index,
			       NULL, 0, 300);
}

static inline int ssu100_setdevice(struct usb_device *dev, u8 *data)
{
	u16 x = ((u16)(data[1] << 8) | (u16)(data[0]));

	return ssu100_control_msg(dev, QT_SET_GET_DEVICE, x, 0);
}


static inline int ssu100_getdevice(struct usb_device *dev, u8 *data)
{
	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
			       QT_SET_GET_DEVICE, 0xc0, 0, 0,
			       data, 3, 300);
}

static inline int ssu100_getregister(struct usb_device *dev,
				     unsigned short uart,
				     unsigned short reg,
				     u8 *data)
{
	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
			       QT_SET_GET_REGISTER, 0xc0, reg,
			       uart, data, sizeof(*data), 300);

}


static inline int ssu100_setregister(struct usb_device *dev,
				     unsigned short uart,
131
				     unsigned short reg,
132 133
				     u16 data)
{
134
	u16 value = (data << 8) | reg;
135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159

	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
			       QT_SET_GET_REGISTER, 0x40, value, uart,
			       NULL, 0, 300);

}

#define set_mctrl(dev, set)		update_mctrl((dev), (set), 0)
#define clear_mctrl(dev, clear)	update_mctrl((dev), 0, (clear))

/* these do not deal with device that have more than 1 port */
static inline int update_mctrl(struct usb_device *dev, unsigned int set,
			       unsigned int clear)
{
	unsigned urb_value;
	int result;

	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
		dbg("%s - DTR|RTS not being set|cleared", __func__);
		return 0;	/* no change */
	}

	clear &= ~set;	/* 'set' takes precedence over 'clear' */
	urb_value = 0;
	if (set & TIOCM_DTR)
160
		urb_value |= UART_MCR_DTR;
161
	if (set & TIOCM_RTS)
162
		urb_value |= UART_MCR_RTS;
163

164
	result = ssu100_setregister(dev, 0, UART_MCR, urb_value);
165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245
	if (result < 0)
		dbg("%s Error from MODEM_CTRL urb", __func__);

	return result;
}

static int ssu100_initdevice(struct usb_device *dev)
{
	u8 *data;
	int result = 0;

	dbg("%s", __func__);

	data = kzalloc(3, GFP_KERNEL);
	if (!data)
		return -ENOMEM;

	result = ssu100_getdevice(dev, data);
	if (result < 0) {
		dbg("%s - get_device failed %i", __func__, result);
		goto out;
	}

	data[1] &= ~FULLPWRBIT;

	result = ssu100_setdevice(dev, data);
	if (result < 0) {
		dbg("%s - setdevice failed %i", __func__, result);
		goto out;
	}

	result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0);
	if (result < 0) {
		dbg("%s - set prebuffer level failed %i", __func__, result);
		goto out;
	}

	result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0);
	if (result < 0) {
		dbg("%s - set ATFprebuffer level failed %i", __func__, result);
		goto out;
	}

	result = ssu100_getdevice(dev, data);
	if (result < 0) {
		dbg("%s - get_device failed %i", __func__, result);
		goto out;
	}

	data[0] &= ~(RR_BITS | DUPMODE_BITS);
	data[0] |= CLKS_X4;
	data[1] &= ~(LOOPMODE_BITS);
	data[1] |= RS232_MODE;

	result = ssu100_setdevice(dev, data);
	if (result < 0) {
		dbg("%s - setdevice failed %i", __func__, result);
		goto out;
	}

out:	kfree(data);
	return result;

}


static void ssu100_set_termios(struct tty_struct *tty,
			       struct usb_serial_port *port,
			       struct ktermios *old_termios)
{
	struct usb_device *dev = port->serial->dev;
	struct ktermios *termios = tty->termios;
	u16 baud, divisor, remainder;
	unsigned int cflag = termios->c_cflag;
	u16 urb_value = 0; /* will hold the new flags */
	int result;

	dbg("%s", __func__);

	if (cflag & PARENB) {
		if (cflag & PARODD)
246
			urb_value |= UART_LCR_PARITY;
247 248 249 250 251 252
		else
			urb_value |= SERIAL_EVEN_PARITY;
	}

	switch (cflag & CSIZE) {
	case CS5:
253
		urb_value |= UART_LCR_WLEN5;
254 255
		break;
	case CS6:
256
		urb_value |= UART_LCR_WLEN6;
257 258
		break;
	case CS7:
259
		urb_value |= UART_LCR_WLEN7;
260 261 262
		break;
	default:
	case CS8:
263
		urb_value |= UART_LCR_WLEN8;
264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314
		break;
	}

	baud = tty_get_baud_rate(tty);
	if (!baud)
		baud = 9600;

	dbg("%s - got baud = %d\n", __func__, baud);


	divisor = MAX_BAUD_RATE / baud;
	remainder = MAX_BAUD_RATE % baud;
	if (((remainder * 2) >= baud) && (baud != 110))
		divisor++;

	urb_value = urb_value << 8;

	result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value);
	if (result < 0)
		dbg("%s - set uart failed", __func__);

	if (cflag & CRTSCTS)
		result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
					    SERIAL_CRTSCTS, 0);
	else
		result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
					    0, 0);
	if (result < 0)
		dbg("%s - set HW flow control failed", __func__);

	if (I_IXOFF(tty) || I_IXON(tty)) {
		u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty)));

		result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
					    x, 0);
	} else
		result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
					    0, 0);

	if (result < 0)
		dbg("%s - set SW flow control failed", __func__);

}


static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
{
	struct usb_device *dev = port->serial->dev;
	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
	u8 *data;
	int result;
315
	unsigned long flags;
316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332

	dbg("%s - port %d", __func__, port->number);

	data = kzalloc(2, GFP_KERNEL);
	if (!data)
		return -ENOMEM;

	result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
				 QT_OPEN_CLOSE_CHANNEL,
				 QT_TRANSFER_IN, 0x01,
				 0, data, 2, 300);
	if (result < 0) {
		dbg("%s - open failed %i", __func__, result);
		kfree(data);
		return result;
	}

333
	spin_lock_irqsave(&priv->status_lock, flags);
334 335
	priv->shadowLSR = data[0];
	priv->shadowMSR = data[1];
336
	spin_unlock_irqrestore(&priv->status_lock, flags);
337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379

	kfree(data);

/* set to 9600 */
	result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300);
	if (result < 0)
		dbg("%s - set uart failed", __func__);

	if (tty)
		ssu100_set_termios(tty, port, tty->termios);

	return usb_serial_generic_open(tty, port);
}

static void ssu100_close(struct usb_serial_port *port)
{
	dbg("%s", __func__);
	usb_serial_generic_close(port);
}

static int get_serial_info(struct usb_serial_port *port,
			   struct serial_struct __user *retinfo)
{
	struct serial_struct tmp;

	if (!retinfo)
		return -EFAULT;

	memset(&tmp, 0, sizeof(tmp));
	tmp.line		= port->serial->minor;
	tmp.port		= 0;
	tmp.irq			= 0;
	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
	tmp.xmit_fifo_size	= port->bulk_out_size;
	tmp.baud_base		= 9600;
	tmp.close_delay		= 5*HZ;
	tmp.closing_wait	= 30*HZ;

	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
		return -EFAULT;
	return 0;
}

380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418
static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
{
	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
	struct async_icount prev, cur;
	unsigned long flags;

	spin_lock_irqsave(&priv->status_lock, flags);
	prev = priv->icount;
	spin_unlock_irqrestore(&priv->status_lock, flags);

	while (1) {
		wait_event_interruptible(priv->delta_msr_wait,
					 ((priv->icount.rng != prev.rng) ||
					  (priv->icount.dsr != prev.dsr) ||
					  (priv->icount.dcd != prev.dcd) ||
					  (priv->icount.cts != prev.cts)));

		if (signal_pending(current))
			return -ERESTARTSYS;

		spin_lock_irqsave(&priv->status_lock, flags);
		cur = priv->icount;
		spin_unlock_irqrestore(&priv->status_lock, flags);

		if ((prev.rng == cur.rng) &&
		    (prev.dsr == cur.dsr) &&
		    (prev.dcd == cur.dcd) &&
		    (prev.cts == cur.cts))
			return -EIO;

		if ((arg & TIOCM_RNG && (prev.rng != cur.rng)) ||
		    (arg & TIOCM_DSR && (prev.dsr != cur.dsr)) ||
		    (arg & TIOCM_CD  && (prev.dcd != cur.dcd)) ||
		    (arg & TIOCM_CTS && (prev.cts != cur.cts)))
			return 0;
	}
	return 0;
}

419 420 421 422 423
static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
		    unsigned int cmd, unsigned long arg)
{
	struct usb_serial_port *port = tty->driver_data;
	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
424
	void __user *user_arg = (void __user *)arg;
425 426 427 428 429 430 431 432 433

	dbg("%s cmd 0x%04x", __func__, cmd);

	switch (cmd) {
	case TIOCGSERIAL:
		return get_serial_info(port,
				       (struct serial_struct __user *) arg);

	case TIOCMIWAIT:
434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453
		return wait_modem_info(port, arg);

	case TIOCGICOUNT:
	{
		struct serial_icounter_struct icount;
		struct async_icount cnow = priv->icount;
		memset(&icount, 0, sizeof(icount));
		icount.cts = cnow.cts;
		icount.dsr = cnow.dsr;
		icount.rng = cnow.rng;
		icount.dcd = cnow.dcd;
		icount.rx = cnow.rx;
		icount.tx = cnow.tx;
		icount.frame = cnow.frame;
		icount.overrun = cnow.overrun;
		icount.parity = cnow.parity;
		icount.brk = cnow.brk;
		icount.buf_overrun = cnow.buf_overrun;
		if (copy_to_user(user_arg, &icount, sizeof(icount)))
			return -EFAULT;
454
		return 0;
455
	}
456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476

	default:
		break;
	}

	dbg("%s arg not supported", __func__);

	return -ENOIOCTLCMD;
}

static void ssu100_set_max_packet_size(struct usb_serial_port *port)
{
	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
	struct usb_serial *serial = port->serial;
	struct usb_device *udev = serial->dev;

	struct usb_interface *interface = serial->interface;
	struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;

	unsigned num_endpoints;
	int i;
477
	unsigned long flags;
478 479 480 481 482 483 484 485 486 487 488

	num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
	dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);

	for (i = 0; i < num_endpoints; i++) {
		dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
			interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
		ep_desc = &interface->cur_altsetting->endpoint[i].desc;
	}

	/* set max packet size based on descriptor */
489
	spin_lock_irqsave(&priv->status_lock, flags);
490
	priv->max_packet_size = ep_desc->wMaxPacketSize;
491
	spin_unlock_irqrestore(&priv->status_lock, flags);
492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509

	dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
}

static int ssu100_attach(struct usb_serial *serial)
{
	struct ssu100_port_private *priv;
	struct usb_serial_port *port = *serial->port;

	dbg("%s", __func__);

	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
	if (!priv) {
		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
			sizeof(*priv));
		return -ENOMEM;
	}

510
	spin_lock_init(&priv->status_lock);
511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530
	init_waitqueue_head(&priv->delta_msr_wait);
	usb_set_serial_port_data(port, priv);
	ssu100_set_max_packet_size(port);

	return ssu100_initdevice(serial->dev);
}

static int ssu100_tiocmget(struct tty_struct *tty, struct file *file)
{
	struct usb_serial_port *port = tty->driver_data;
	struct usb_device *dev = port->serial->dev;
	u8 *d;
	int r;

	dbg("%s\n", __func__);

	d = kzalloc(2, GFP_KERNEL);
	if (!d)
		return -ENOMEM;

531
	r = ssu100_getregister(dev, 0, UART_MCR, d);
532 533 534
	if (r < 0)
		goto mget_out;

535
	r = ssu100_getregister(dev, 0, UART_MSR, d+1);
536 537 538
	if (r < 0)
		goto mget_out;

539 540 541 542 543 544
	r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) |
		(d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) |
		(d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) |
		(d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) |
		(d[1] & UART_MSR_RI ? TIOCM_RI : 0) |
		(d[1] & UART_MSR_DSR ? TIOCM_DSR : 0);
545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570

mget_out:
	kfree(d);
	return r;
}

static int ssu100_tiocmset(struct tty_struct *tty, struct file *file,
			   unsigned int set, unsigned int clear)
{
	struct usb_serial_port *port = tty->driver_data;
	struct usb_device *dev = port->serial->dev;

	dbg("%s\n", __func__);
	return update_mctrl(dev, set, clear);
}

static void ssu100_dtr_rts(struct usb_serial_port *port, int on)
{
	struct usb_device *dev = port->serial->dev;

	dbg("%s\n", __func__);

	mutex_lock(&port->serial->disc_mutex);
	if (!port->serial->disconnected) {
		/* Disable flow control */
		if (!on &&
571
		    ssu100_setregister(dev, 0, UART_MCR, 0) < 0)
572 573 574 575 576 577 578 579 580 581
			dev_err(&port->dev, "error from flowcontrol urb\n");
		/* drop RTS and DTR */
		if (on)
			set_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
		else
			clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
	}
	mutex_unlock(&port->serial->disc_mutex);
}

582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604
static void ssu100_update_msr(struct usb_serial_port *port, u8 msr)
{
	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;

	spin_lock_irqsave(&priv->status_lock, flags);
	priv->shadowMSR = msr;
	spin_unlock_irqrestore(&priv->status_lock, flags);

	if (msr & UART_MSR_ANY_DELTA) {
		/* update input line counters */
		if (msr & UART_MSR_DCTS)
			priv->icount.cts++;
		if (msr & UART_MSR_DDSR)
			priv->icount.dsr++;
		if (msr & UART_MSR_DDCD)
			priv->icount.dcd++;
		if (msr & UART_MSR_TERI)
			priv->icount.rng++;
		wake_up_interruptible(&priv->delta_msr_wait);
	}
}

605 606
static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr,
			      char *tty_flag)
607 608 609 610 611 612 613 614
{
	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;

	spin_lock_irqsave(&priv->status_lock, flags);
	priv->shadowLSR = lsr;
	spin_unlock_irqrestore(&priv->status_lock, flags);

615
	*tty_flag = TTY_NORMAL;
616
	if (lsr & UART_LSR_BRK_ERROR_BITS) {
617 618 619
		/* we always want to update icount, but we only want to
		 * update tty_flag for one case */
		if (lsr & UART_LSR_BI) {
620
			priv->icount.brk++;
621 622 623 624
			*tty_flag = TTY_BREAK;
			usb_serial_handle_break(port);
		}
		if (lsr & UART_LSR_PE) {
625
			priv->icount.parity++;
626 627 628 629 630 631 632 633 634
			if (*tty_flag == TTY_NORMAL)
				*tty_flag = TTY_PARITY;
		}
		if (lsr & UART_LSR_FE) {
			priv->icount.frame++;
			if (*tty_flag == TTY_NORMAL)
				*tty_flag = TTY_FRAME;
		}
		if (lsr & UART_LSR_OE){
635
			priv->icount.overrun++;
636 637 638
			if (*tty_flag == TTY_NORMAL)
				*tty_flag = TTY_OVERRUN;
		}
639
	}
640

641 642
}

643 644 645 646 647 648
static int ssu100_process_packet(struct tty_struct *tty,
				 struct usb_serial_port *port,
				 struct ssu100_port_private *priv,
				 char *packet, int len)
{
	int i;
649
	char flag = TTY_NORMAL;
650 651 652 653
	char *ch;

	dbg("%s - port %d", __func__, port->number);

654 655
	if ((len >= 4) &&
	    (packet[0] == 0x1b) && (packet[1] == 0x1b) &&
656
	    ((packet[2] == 0x00) || (packet[2] == 0x01))) {
657 658 659 660 661
		if (packet[2] == 0x00) {
			ssu100_update_lsr(port, packet[3], &flag);
			if (flag == TTY_OVERRUN)
				tty_insert_flip_char(tty, 0, TTY_OVERRUN);
		}
662 663
		if (packet[2] == 0x01)
			ssu100_update_msr(port, packet[3]);
664 665 666 667 668 669 670 671 672 673 674

		len -= 4;
		ch = packet + 4;
	} else
		ch = packet;

	if (!len)
		return 0;	/* status only */

	if (port->port.console && port->sysrq) {
		for (i = 0; i < len; i++, ch++) {
675
			if (!usb_serial_handle_sysrq_char(port, *ch))
676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730
				tty_insert_flip_char(tty, *ch, flag);
		}
	} else
		tty_insert_flip_string_fixed_flag(tty, ch, flag, len);

	return len;
}

static void ssu100_process_read_urb(struct urb *urb)
{
	struct usb_serial_port *port = urb->context;
	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
	char *data = (char *)urb->transfer_buffer;
	struct tty_struct *tty;
	int count = 0;
	int i;
	int len;

	dbg("%s", __func__);

	tty = tty_port_tty_get(&port->port);
	if (!tty)
		return;

	for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
		len = min_t(int, urb->actual_length - i, priv->max_packet_size);
		count += ssu100_process_packet(tty, port, priv, &data[i], len);
	}

	if (count)
		tty_flip_buffer_push(tty);
	tty_kref_put(tty);
}

static struct usb_serial_driver ssu100_device = {
	.driver = {
		.owner = THIS_MODULE,
		.name = "ssu100",
	},
	.description	     = DRIVER_DESC,
	.id_table	     = id_table,
	.usb_driver	     = &ssu100_driver,
	.num_ports	     = 1,
	.bulk_in_size        = 256,
	.bulk_out_size       = 256,
	.open		     = ssu100_open,
	.close		     = ssu100_close,
	.attach              = ssu100_attach,
	.release             = ssu100_release,
	.dtr_rts             = ssu100_dtr_rts,
	.process_read_urb    = ssu100_process_read_urb,
	.tiocmget            = ssu100_tiocmget,
	.tiocmset            = ssu100_tiocmset,
	.ioctl               = ssu100_ioctl,
	.set_termios         = ssu100_set_termios,
731
	.disconnect          = usb_serial_generic_disconnect,
732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774
};

static int __init ssu100_init(void)
{
	int retval;

	dbg("%s", __func__);

	/* register with usb-serial */
	retval = usb_serial_register(&ssu100_device);

	if (retval)
		goto failed_usb_sio_register;

	retval = usb_register(&ssu100_driver);
	if (retval)
		goto failed_usb_register;

	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
	       DRIVER_DESC "\n");

	return 0;

failed_usb_register:
	usb_serial_deregister(&ssu100_device);
failed_usb_sio_register:
	return retval;
}

static void __exit ssu100_exit(void)
{
	usb_deregister(&ssu100_driver);
	usb_serial_deregister(&ssu100_device);
}

module_init(ssu100_init);
module_exit(ssu100_exit);

MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");

module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");