Kconfig 22.9 KB
Newer Older
1 2 3 4
#
# SATA/PATA driver configuration
#

5 6 7 8 9 10 11 12
config HAVE_PATA_PLATFORM
	bool
	help
	  This is an internal configuration node for any machine that
	  uses pata-platform driver to enable the relevant driver in the
	  configuration structure without having to submit endless patches
	  to update the PATA_PLATFORM entry.

13
menuconfig ATA
14
	tristate "Serial ATA and Parallel ATA drivers"
15
	depends on HAS_IOMEM
16
	depends on BLOCK
17
	depends on !(M32R || M68K || S390) || BROKEN
18
	select SCSI
19 20 21 22 23 24 25
	---help---
	  If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
	  any other ATA device under Linux, say Y and make sure that you know
	  the name of your ATA host adapter (the card inside your computer
	  that "speaks" the ATA protocol, also called ATA controller),
	  because you will be asked for it.

26 27 28 29 30
	  NOTE: ATA enables basic SCSI support; *however*,
	  'SCSI disk support', 'SCSI tape support', or
	  'SCSI CDROM support' may also be needed,
	  depending on your hardware configuration.

31 32
if ATA

33 34 35 36
config ATA_NONSTANDARD
       bool
       default n

37 38 39 40 41 42 43 44 45 46 47
config ATA_VERBOSE_ERROR
	bool "Verbose ATA error reporting"
	default y
	help
	  This option adds parsing of ATA command descriptions and error bits
	  in libata kernel output, making it easier to interpret.
	  This option will enlarge the kernel by approx. 6KB. Disable it only
	  if kernel size is more important than ease of debugging.

	  If unsure, say Y.

48
config ATA_ACPI
49
	bool "ATA ACPI Support"
50 51 52 53 54 55 56 57 58 59 60
	depends on ACPI && PCI
	default y
	help
	  This option adds support for ATA-related ACPI objects.
	  These ACPI objects add the ability to retrieve taskfiles
	  from the ACPI BIOS and write them to the disk controller.
	  These objects may be related to performance, security,
	  power management, or other areas.
	  You can disable this at kernel boot time by using the
	  option libata.noacpi=1

61
config SATA_ZPODD
62
	bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
63 64 65
	depends on ATA_ACPI
	default n
	help
66 67 68 69 70 71
	  This option adds support for SATA Zero Power Optical Disc
	  Drive (ZPODD). It requires both the ODD and the platform
	  support, and if enabled, will automatically power on/off the
	  ODD when certain condition is satisfied. This does not impact
	  end user's experience of the ODD, only power is saved when
	  the ODD is not in use (i.e. no disc inside).
72 73 74

	  If unsure, say N.

75 76 77 78
config SATA_PMP
	bool "SATA Port Multiplier support"
	default y
	help
79 80
	  This option adds support for SATA Port Multipliers
	  (the SATA version of an ethernet hub, or SAS expander).
81

82 83
comment "Controllers with non-SFF native interface"

84
config SATA_AHCI
85
	tristate "AHCI SATA support"
86
	depends on PCI
87 88 89 90 91
	help
	  This option enables support for AHCI Serial ATA.

	  If unsure, say N.

92 93 94 95 96 97 98 99
config SATA_AHCI_PLATFORM
	tristate "Platform AHCI SATA support"
	help
	  This option enables support for Platform AHCI Serial ATA
	  controllers.

	  If unsure, say N.

100 101 102
config SATA_FSL
	tristate "Freescale 3.0Gbps SATA support"
	depends on FSL_SOC
103
	help
104 105
	  This option enables support for Freescale 3.0Gbps SATA controller.
	  It can be found on MPC837x and MPC8315.
106 107 108

	  If unsure, say N.

109
config SATA_INIC162X
110
	tristate "Initio 162x SATA support (Very Experimental)"
111 112 113 114
	depends on PCI
	help
	  This option enables support for Initio 162x Serial ATA.

115 116 117 118 119 120 121 122
config SATA_ACARD_AHCI
	tristate "ACard AHCI variant (ATP 8620)"
	depends on PCI
	help
	  This option enables support for Acard.

	  If unsure, say N.

123 124 125
config SATA_SIL24
	tristate "Silicon Image 3124/3132 SATA support"
	depends on PCI
126
	help
127
	  This option enables support for Silicon Image 3124/3132 Serial ATA.
128 129 130 131

	  If unsure, say N.

config ATA_SFF
132
	bool "ATA SFF support (for legacy IDE and PATA)"
133 134 135 136 137
	default y
	help
	  This option adds support for ATA controllers with SFF
	  compliant or similar programming interface.

138 139 140 141 142 143 144
	  SFF is the legacy IDE interface that has been around since
	  the dawn of time.  Almost all PATA controllers have an
	  SFF interface.  Many SATA controllers have an SFF interface
	  when configured into a legacy compatibility mode.

	  For users with exclusively modern controllers like AHCI,
	  Silicon Image 3124, or Marvell 6440, you may choose to
145
	  disable this unneeded SFF support.
146 147 148

	  If unsure, say Y.

149 150
if ATA_SFF

151 152 153 154
comment "SFF controllers with custom DMA interface"

config PDC_ADMA
	tristate "Pacific Digital ADMA support"
155
	depends on PCI
156
	help
157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179
	  This option enables support for Pacific Digital ADMA controllers

	  If unsure, say N.

config PATA_OCTEON_CF
	tristate "OCTEON Boot Bus Compact Flash support"
	depends on CPU_CAVIUM_OCTEON
	help
	  This option enables a polled compact flash driver for use with
	  compact flash cards attached to the OCTEON boot bus.

	  If unsure, say N.

config SATA_QSTOR
	tristate "Pacific Digital SATA QStor support"
	depends on PCI
	help
	  This option enables support for Pacific Digital Serial ATA QStor.

	  If unsure, say N.

config SATA_SX4
	tristate "Promise SATA SX4 support (Experimental)"
180
	depends on PCI
181 182
	help
	  This option enables support for Promise Serial ATA SX4.
183 184 185

	  If unsure, say N.

186 187 188 189 190
config ATA_BMDMA
	bool "ATA BMDMA support"
	default y
	help
	  This option adds support for SFF ATA controllers with BMDMA
191 192
	  capability.  BMDMA stands for bus-master DMA and is the
	  de facto DMA interface for SFF controllers.
193

194
	  If unsure, say Y.
195 196 197 198 199

if ATA_BMDMA

comment "SATA SFF controllers with BMDMA"

200
config ATA_PIIX
201
	tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
202
	depends on PCI
203
	help
204
	  This option enables support for ICH5/6/7/8 Serial ATA
205 206
	  and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
	  host controllers.
207 208 209

	  If unsure, say N.

210 211 212 213 214 215 216 217 218
config SATA_DWC
	tristate "DesignWare Cores SATA support"
	depends on 460EX
	help
	  This option enables support for the on-chip SATA controller of the
	  AppliedMicro processor 460EX.

	  If unsure, say N.

219 220 221 222 223 224 225 226 227 228 229 230
config SATA_DWC_DEBUG
	bool "Debugging driver version"
	depends on SATA_DWC
	help
	  This option enables debugging output in the driver.

config SATA_DWC_VDEBUG
	bool "Verbose debug output"
	depends on SATA_DWC_DEBUG
	help
	  This option enables the taskfile dumping and NCQ debugging.

231 232 233 234 235 236 237 238
config SATA_HIGHBANK
	tristate "Calxeda Highbank SATA support"
	help
	  This option enables support for the Calxeda Highbank SoC's
	  onboard SATA.

	  If unsure, say N.

239
config SATA_MV
240
	tristate "Marvell SATA support"
241 242
	help
	  This option enables support for the Marvell Serial ATA family.
243 244
	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
	  as well as the newer [67]042 PCI-X/PCIe and SOC devices.
245 246 247

	  If unsure, say N.

248
config SATA_NV
249
	tristate "NVIDIA SATA support"
250
	depends on PCI
251 252 253 254 255
	help
	  This option enables support for NVIDIA Serial ATA.

	  If unsure, say N.

256
config SATA_PROMISE
257
	tristate "Promise SATA TX2/TX4 support"
258
	depends on PCI
259 260 261 262 263
	help
	  This option enables support for Promise Serial ATA TX2/TX4.

	  If unsure, say N.

264 265 266 267 268 269 270
config SATA_RCAR
	tristate "Renesas R-Car SATA support"
	depends on ARCH_SHMOBILE && ARCH_R8A7779
	help
	  This option enables support for Renesas R-Car Serial ATA.

	  If unsure, say N.
271

272
config SATA_SIL
273
	tristate "Silicon Image SATA support"
274
	depends on PCI
275 276 277 278 279
	help
	  This option enables support for Silicon Image Serial ATA.

	  If unsure, say N.

280
config SATA_SIS
281
	tristate "SiS 964/965/966/180 SATA support"
282
	depends on PCI
283
	select PATA_SIS
284
	help
285
	  This option enables support for SiS Serial ATA on
286 287 288
	  SiS 964/965/966/180 and Parallel ATA on SiS 180.
	  The PATA support for SiS 180 requires additionally to
	  enable the PATA_SIS driver in the config.
289 290
	  If unsure, say N.

291 292 293 294 295 296 297 298 299
config SATA_SVW
	tristate "ServerWorks Frodo / Apple K2 SATA support"
	depends on PCI
	help
	  This option enables support for Broadcom/Serverworks/Apple K2
	  SATA support.

	  If unsure, say N.

300
config SATA_ULI
301
	tristate "ULi Electronics SATA support"
302
	depends on PCI
303 304 305 306 307
	help
	  This option enables support for ULi Electronics SATA.

	  If unsure, say N.

308
config SATA_VIA
309
	tristate "VIA SATA support"
310
	depends on PCI
311 312 313 314 315
	help
	  This option enables support for VIA Serial ATA.

	  If unsure, say N.

316
config SATA_VITESSE
317
	tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
318
	depends on PCI
319 320 321 322 323
	help
	  This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.

	  If unsure, say N.

324
comment "PATA SFF controllers with BMDMA"
325

326
config PATA_ALI
Alan Cox's avatar
Alan Cox committed
327 328
	tristate "ALi PATA support"
	depends on PCI
329 330 331 332 333 334 335
	help
	  This option enables support for the ALi ATA interfaces
	  found on the many ALi chipsets.

	  If unsure, say N.

config PATA_AMD
336
	tristate "AMD/NVidia PATA support"
337 338 339 340 341 342 343
	depends on PCI
	help
	  This option enables support for the AMD and NVidia PATA
	  interfaces found on the chipsets for Athlon/Athlon64.

	  If unsure, say N.

344 345
config PATA_ARASAN_CF
	tristate "ARASAN CompactFlash PATA Controller Support"
346
	depends on DMADEVICES
347 348 349 350
	select DMA_ENGINE
	help
	  Say Y here to support the ARASAN CompactFlash PATA controller

351
config PATA_ARTOP
352 353
	tristate "ARTOP 6210/6260 PATA support"
	depends on PCI
354 355 356 357 358
	help
	  This option enables support for ARTOP PATA controllers.

	  If unsure, say N.

359 360
config PATA_ATIIXP
	tristate "ATI PATA support"
361 362
	depends on PCI
	help
363 364
	  This option enables support for the ATI ATA interfaces
	  found on the many ATI chipsets.
365 366 367

	  If unsure, say N.

368 369
config PATA_ATP867X
	tristate "ARTOP/Acard ATP867X PATA support"
370
	depends on PCI
371
	help
372 373
	  This option enables support for ARTOP/Acard ATP867X PATA
	  controllers.
374 375 376

	  If unsure, say N.

377 378 379
config PATA_BF54X
	tristate "Blackfin 54x ATAPI support"
	depends on BF542 || BF548 || BF549
380
	help
381 382
	  This option enables support for the built-in ATAPI controller on
	  Blackfin 54x family chips.
383 384 385

	  If unsure, say N.

386
config PATA_CMD64X
387 388
	tristate "CMD64x PATA support"
	depends on PCI
389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404
	help
	  This option enables support for the CMD64x series chips
	  except for the CMD640.

	  If unsure, say N.

config PATA_CS5520
	tristate "CS5510/5520 PATA support"
	depends on PCI
	help
	  This option enables support for the Cyrix 5510/5520
	  companion chip used with the MediaGX/Geode processor family.

	  If unsure, say N.

config PATA_CS5530
Alan Cox's avatar
Alan Cox committed
405 406
	tristate "CS5530 PATA support"
	depends on PCI
407 408 409 410 411 412 413 414
	help
	  This option enables support for the Cyrix/NatSemi/AMD CS5530
	  companion chip used with the MediaGX/Geode processor family.

	  If unsure, say N.

config PATA_CS5535
	tristate "CS5535 PATA support (Experimental)"
415
	depends on PCI && X86 && !X86_64
416 417 418 419 420 421
	help
	  This option enables support for the NatSemi/AMD CS5535
	  companion chip used with the Geode processor family.

	  If unsure, say N.

422
config PATA_CS5536
Alan Cox's avatar
Alan Cox committed
423
	tristate "CS5536 PATA support"
424
	depends on PCI
425 426 427 428 429 430
	help
	  This option enables support for the AMD CS5536
	  companion chip used with the Geode LX processor family.

	  If unsure, say N.

431 432
config PATA_CYPRESS
	tristate "Cypress CY82C693 PATA support (Very Experimental)"
433
	depends on PCI
434 435 436 437 438 439 440 441 442 443 444 445 446 447 448
	help
	  This option enables support for the Cypress/Contaq CY82C693
	  chipset found in some Alpha systems

	  If unsure, say N.

config PATA_EFAR
	tristate "EFAR SLC90E66 support"
	depends on PCI
	help
	  This option enables support for the EFAR SLC90E66
	  IDE controller found on some older machines.

	  If unsure, say N.

449 450 451 452 453 454 455 456 457
config PATA_EP93XX
	tristate "Cirrus Logic EP93xx PATA support"
	depends on ARCH_EP93XX
	help
	  This option enables support for the PATA controller in
	  the Cirrus Logic EP9312 and EP9315 ARM CPU.

	  If unsure, say N.

458
config PATA_HPT366
459 460
	tristate "HPT 366/368 PATA support"
	depends on PCI
461 462 463 464 465 466 467
	help
	  This option enables support for the HPT 366 and 368
	  PATA controllers via the new ATA layer.

	  If unsure, say N.

config PATA_HPT37X
468 469
	tristate "HPT 370/370A/371/372/374/302 PATA support"
	depends on PCI
470 471 472 473 474 475 476
	help
	  This option enables support for the majority of the later HPT
	  PATA controllers via the new ATA layer.

	  If unsure, say N.

config PATA_HPT3X2N
477
	tristate "HPT 371N/372N/302N PATA support"
478
	depends on PCI
479 480
	help
	  This option enables support for the N variant HPT PATA
481
	  controllers via the new ATA layer.
482 483 484 485

	  If unsure, say N.

config PATA_HPT3X3
486
	tristate "HPT 343/363 PATA support"
487 488 489 490 491 492 493
	depends on PCI
	help
	  This option enables support for the HPT 343/363
	  PATA controllers via the new ATA layer

	  If unsure, say N.

494
config PATA_HPT3X3_DMA
495
	bool "HPT 343/363 DMA support"
496 497 498 499 500 501
	depends on PATA_HPT3X3
	help
	  This option enables DMA support for the HPT343/363
	  controllers. Enable with care as there are still some
	  problems with DMA on this chipset.

502 503 504
config PATA_ICSIDE
	tristate "Acorn ICS PATA support"
	depends on ARM && ARCH_ACORN
505
	help
506 507 508 509
	  On Acorn systems, say Y here if you wish to use the ICS PATA
	  interface card.  This is not required for ICS partition support.
	  If you are unsure, say N to this.

510 511 512 513 514 515 516 517 518
config PATA_IMX
	tristate "PATA support for Freescale iMX"
	depends on ARCH_MXC
	help
	  This option enables support for the PATA host available on Freescale
          iMX SoCs.

	  If unsure, say N.

519 520
config PATA_IT8213
	tristate "IT8213 PATA support (Experimental)"
521
	depends on PCI
522 523 524
	help
	  This option enables support for the ITE 821 PATA
          controllers via the new ATA layer.
525 526 527 528

	  If unsure, say N.

config PATA_IT821X
529 530
	tristate "IT8211/2 PATA support"
	depends on PCI
531 532 533 534 535 536 537
	help
	  This option enables support for the ITE 8211 and 8212
	  PATA controllers via the new ATA layer, including RAID
	  mode.

	  If unsure, say N.

538 539 540 541 542 543 544 545 546
config PATA_JMICRON
	tristate "JMicron PATA support"
	depends on PCI
	help
	  Enable support for the JMicron IDE controller, via the new
	  ATA layer.

	  If unsure, say N.

547 548 549
config PATA_MACIO
	tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
	depends on PPC_PMAC
550
	help
551 552 553 554
	  Most IDE capable PowerMacs have IDE busses driven by a variant
          of this controller which is part of the Apple chipset used on
          most PowerMac models. Some models have multiple busses using
          different chipsets, though generally, MacIO is one of them.
555

556 557 558 559
config PATA_MARVELL
	tristate "Marvell PATA support via legacy mode"
	depends on PCI
	help
560 561 562 563
	  This option enables limited support for the Marvell 88SE61xx ATA
	  controllers. If you wish to use only the SATA ports then select
	  the AHCI driver alone. If you wish to the use the PATA port or
	  both SATA and PATA include this driver.
564 565 566

	  If unsure, say N.

567 568 569 570 571 572 573 574 575 576
config PATA_MPC52xx
	tristate "Freescale MPC52xx SoC internal IDE"
	depends on PPC_MPC52xx && PPC_BESTCOMM
	select PPC_BESTCOMM_ATA
	help
	  This option enables support for integrated IDE controller
	  of the Freescale MPC52xx SoC.

	  If unsure, say N.

577 578 579 580 581 582 583 584 585
config PATA_NETCELL
	tristate "NETCELL Revolution RAID support"
	depends on PCI
	help
	  This option enables support for the Netcell Revolution RAID
	  PATA controller.

	  If unsure, say N.

586
config PATA_NINJA32
587 588
	tristate "Ninja32/Delkin Cardbus ATA support"
	depends on PCI
589 590 591 592 593 594
	help
	  This option enables support for the Ninja32, Delkin and
	  possibly other brands of Cardbus ATA adapter

	  If unsure, say N.

595
config PATA_NS87415
Alan Cox's avatar
Alan Cox committed
596 597
	tristate "Nat Semi NS87415 PATA support"
	depends on PCI
598 599 600 601 602 603
	help
	  This option enables support for the National Semiconductor
	  NS87415 PCI-IDE controller.

	  If unsure, say N.

604 605 606
config PATA_OLDPIIX
	tristate "Intel PATA old PIIX support"
	depends on PCI
607
	help
608
	  This option enables support for early PIIX PATA support.
609 610 611 612

	  If unsure, say N.

config PATA_OPTIDMA
613
	tristate "OPTI FireStar PATA support (Very Experimental)"
614
	depends on PCI
615 616 617
	help
	  This option enables DMA/PIO support for the later OPTi
	  controllers found on some old motherboards and in some
618
	  laptops.
619 620 621

	  If unsure, say N.

622 623 624 625 626 627 628 629
config PATA_PDC2027X
	tristate "Promise PATA 2027x support"
	depends on PCI
	help
	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.

	  If unsure, say N.

630
config PATA_PDC_OLD
Alan Cox's avatar
Alan Cox committed
631 632
	tristate "Older Promise PATA controller support"
	depends on PCI
633 634 635 636 637 638 639
	help
	  This option enables support for the Promise 20246, 20262, 20263,
	  20265 and 20267 adapters.

	  If unsure, say N.

config PATA_RADISYS
Alan Cox's avatar
Alan Cox committed
640
	tristate "RADISYS 82600 PATA support (Experimental)"
641
	depends on PCI
642 643 644 645 646 647
	help
	  This option enables support for the RADISYS 82600
	  PATA controllers via the new ATA layer

	  If unsure, say N.

648 649 650 651 652 653 654 655 656 657
config PATA_RDC
	tristate "RDC PATA support"
	depends on PCI
	help
	  This option enables basic support for the later RDC PATA controllers
	  controllers via the new ATA layer. For the RDC 1010, you need to
	  enable the IT821X driver instead.

	  If unsure, say N.

658 659
config PATA_SC1200
	tristate "SC1200 PATA support"
660 661
	depends on PCI
	help
662 663
	  This option enables support for the NatSemi/AMD SC1200 SoC
	  companion chip used with the Geode processor family.
664 665 666

	  If unsure, say N.

667 668 669 670 671 672 673 674 675 676 677
config PATA_SCC
	tristate "Toshiba's Cell Reference Set IDE support"
	depends on PCI && PPC_CELLEB
	help
	  This option enables support for the built-in IDE controller on
	  Toshiba Cell Reference Board.

	  If unsure, say N.

config PATA_SCH
	tristate "Intel SCH PATA support"
Alan Cox's avatar
Alan Cox committed
678
	depends on PCI
679
	help
680 681
	  This option enables support for Intel SCH PATA on the Intel
	  SCH (US15W, US15L, UL11L) series host controllers.
682 683 684 685

	  If unsure, say N.

config PATA_SERVERWORKS
686 687
	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
	depends on PCI
688 689 690 691 692 693 694 695 696 697 698 699 700 701 702
	help
	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
	  HT1000 PATA controllers, via the new ATA layer.

	  If unsure, say N.

config PATA_SIL680
	tristate "CMD / Silicon Image 680 PATA support"
	depends on PCI
	help
	  This option enables support for CMD / Silicon Image 680 PATA.

	  If unsure, say N.

config PATA_SIS
Alan Cox's avatar
Alan Cox committed
703 704
	tristate "SiS PATA support"
	depends on PCI
705 706 707 708 709
	help
	  This option enables support for SiS PATA controllers

	  If unsure, say N.

710 711
config PATA_TOSHIBA
	tristate "Toshiba Piccolo support (Experimental)"
712
	depends on PCI
713 714 715 716 717 718
	help
	  Support for the Toshiba Piccolo controllers. Currently only the
	  primary channel is supported by this driver.

	  If unsure, say N.

719 720 721 722 723 724 725 726 727
config PATA_TRIFLEX
	tristate "Compaq Triflex PATA support"
	depends on PCI
	help
	  Enable support for the Compaq 'Triflex' IDE controller as found
	  on many Compaq Pentium-Pro systems, via the new ATA layer.

	  If unsure, say N.

728 729 730 731 732 733 734 735 736
config PATA_VIA
	tristate "VIA PATA support"
	depends on PCI
	help
	  This option enables support for the VIA PATA interfaces
	  found on the many VIA chipsets.

	  If unsure, say N.

737 738 739 740 741 742 743 744 745 746 747
config PATA_PXA
	tristate "PXA DMA-capable PATA support"
	depends on ARCH_PXA
	help
	  This option enables support for harddrive attached to PXA CPU's bus.

	  NOTE: This driver utilizes PXA DMA controller, in case your hardware
	        is not capable of doing MWDMA, use pata_platform instead.

	  If unsure, say N.

748 749 750 751 752 753 754 755 756
config PATA_WINBOND
	tristate "Winbond SL82C105 PATA support"
	depends on PCI
	help
	  This option enables support for SL82C105 PATA devices found in the
	  Netwinder and some other systems

	  If unsure, say N.

757 758 759 760 761 762
endif # ATA_BMDMA

comment "PIO-only SFF controllers"

config PATA_AT32
	tristate "Atmel AVR32 PATA support (Experimental)"
763
	depends on AVR32 && PLATFORM_AT32AP
764
	help
765 766 767 768 769 770 771 772 773 774 775 776 777 778 779
	  This option enables support for the IDE devices on the
	  Atmel AT32AP platform.

	  If unsure, say N.

config PATA_AT91
	tristate "PATA support for AT91SAM9260"
	depends on ARM && ARCH_AT91
	help
	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.

	  If unsure, say N.

config PATA_CMD640_PCI
	tristate "CMD640 PCI PATA support (Experimental)"
780
	depends on PCI
781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825
	help
	  This option enables support for the CMD640 PCI IDE
	  interface chip. Only the primary channel is currently
	  supported.

	  If unsure, say N.

config PATA_ISAPNP
	tristate "ISA Plug and Play PATA support"
	depends on ISAPNP
	help
	  This option enables support for ISA plug & play ATA
	  controllers such as those found on old soundcards.

	  If unsure, say N.

config PATA_IXP4XX_CF
	tristate "IXP4XX Compact Flash support"
	depends on ARCH_IXP4XX
	help
	  This option enables support for a Compact Flash connected on
	  the ixp4xx expansion bus. This driver had been written for
	  Loft/Avila boards in mind but can work with others.

	  If unsure, say N.

config PATA_MPIIX
	tristate "Intel PATA MPIIX support"
	depends on PCI
	help
	  This option enables support for MPIIX PATA support.

	  If unsure, say N.

config PATA_NS87410
	tristate "Nat Semi NS87410 PATA support"
	depends on PCI
	help
	  This option enables support for the National Semiconductor
	  NS87410 PCI-IDE controller.

	  If unsure, say N.

config PATA_OPTI
	tristate "OPTI621/6215 PATA support (Very Experimental)"
826
	depends on PCI
827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849
	help
	  This option enables full PIO support for the early Opti ATA
	  controllers found on some old motherboards.

	  If unsure, say N.

config PATA_PALMLD
	tristate "Palm LifeDrive PATA support"
	depends on MACH_PALMLD
	help
	  This option enables support for Palm LifeDrive's internal ATA
	  port via the new ATA layer.

	  If unsure, say N.

config PATA_PCMCIA
	tristate "PCMCIA PATA support"
	depends on PCMCIA
	help
	  This option enables support for PCMCIA ATA interfaces, including
	  compact flash card adapters via the new ATA layer.

	  If unsure, say N.
850

851 852
config PATA_PLATFORM
	tristate "Generic platform device PATA support"
853
	depends on EXPERT || PPC || HAVE_PATA_PLATFORM
854 855 856 857 858
	help
	  This option enables support for generic directly connected ATA
	  devices commonly found on embedded systems.

	  If unsure, say N.
859 860 861

config PATA_OF_PLATFORM
	tristate "OpenFirmware platform device PATA support"
862
	depends on PATA_PLATFORM && OF
863 864 865 866 867 868
	help
	  This option enables support for generic directly connected ATA
	  devices commonly found on embedded systems with OpenFirmware
	  bindings.

	  If unsure, say N.
869

870 871 872
config PATA_QDI
	tristate "QDI VLB PATA support"
	depends on ISA
873
	select PATA_LEGACY
874
	help
875
	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
876

877 878 879
config PATA_RB532
	tristate "RouterBoard 532 PATA CompactFlash support"
	depends on MIKROTIK_RB532
880
	help
881 882
	  This option enables support for the RouterBoard 532
	  PATA CompactFlash controller.
883 884 885

	  If unsure, say N.

886 887 888
config PATA_RZ1000
	tristate "PC Tech RZ1000 PATA support"
	depends on PCI
889
	help
890 891
	  This option enables basic support for the PC Tech RZ1000/1
	  PATA controllers via the new ATA layer
892 893 894

	  If unsure, say N.

895 896 897 898 899 900 901 902 903
config PATA_SAMSUNG_CF
	tristate "Samsung SoC PATA support"
	depends on SAMSUNG_DEV_IDE
	help
	  This option enables basic support for Samsung's S3C/S5P board
	  PATA controllers via the new ATA layer

	  If unsure, say N.

904 905
config PATA_WINBOND_VLB
	tristate "Winbond W83759A VLB PATA support (Experimental)"
906
	depends on ISA
907
	select PATA_LEGACY
908
	help
909 910
	  Support for the Winbond W83759A controller on Vesa Local Bus
	  systems.
911

912
comment "Generic fallback / legacy drivers"
913

914 915 916
config PATA_ACPI
	tristate "ACPI firmware driver for PATA"
	depends on ATA_ACPI && ATA_BMDMA
917
	help
918 919 920 921
	  This option enables an ACPI method driver which drives
	  motherboard PATA controller interfaces through the ACPI
	  firmware in the BIOS. This driver can sometimes handle
	  otherwise unsupported hardware.
922

923 924 925
config ATA_GENERIC
	tristate "Generic ATA support"
	depends on PCI && ATA_BMDMA
926
	help
927 928
	  This option enables support for generic BIOS configured
	  ATA controllers via the new ATA layer
929 930 931

	  If unsure, say N.

932 933
config PATA_LEGACY
	tristate "Legacy ISA PATA support (Experimental)"
934
	depends on (ISA || PCI)
935
	help
936 937
	  This option enables support for ISA/VLB/PCI bus legacy PATA
	  ports and allows them to be accessed via the new ATA layer.
938

939
	  If unsure, say N.
940

941
endif # ATA_SFF
942
endif # ATA