Commit 1c2a49f6 authored by Anton Vorontsov's avatar Anton Vorontsov Committed by Jeff Garzik

ahci: Add platform driver

This can be used for AHCI-compatible interfaces implemented inside
System-On-Chip solutions, or AHCI devices connected via localbus.
Signed-off-by: default avatarAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 365cfa1e
......@@ -65,6 +65,14 @@ config SATA_AHCI
If unsure, say N.
config SATA_AHCI_PLATFORM
tristate "Platform AHCI SATA support"
help
This option enables support for Platform AHCI Serial ATA
controllers.
If unsure, say N.
config SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
depends on PCI
......
......@@ -2,6 +2,7 @@
obj-$(CONFIG_ATA) += libata.o
obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o
obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
obj-$(CONFIG_SATA_SVW) += sata_svw.o
obj-$(CONFIG_ATA_PIIX) += ata_piix.o
obj-$(CONFIG_SATA_PROMISE) += sata_promise.o
......
/*
* AHCI SATA platform driver
*
* Copyright 2004-2005 Red Hat, Inc.
* Jeff Garzik <jgarzik@pobox.com>
* Copyright 2010 MontaVista Software, LLC.
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
#include "ahci.h"
static int __init ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_platform_data *pdata = dev->platform_data;
struct ata_port_info pi = {
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
};
const struct ata_port_info *ppi[] = { &pi, NULL };
struct ahci_host_priv *hpriv;
struct ata_host *host;
struct resource *mem;
int irq;
int n_ports;
int i;
int rc;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
dev_err(dev, "no mmio space\n");
return -EINVAL;
}
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(dev, "no irq\n");
return -EINVAL;
}
if (pdata && pdata->init) {
rc = pdata->init(dev);
if (rc)
return rc;
}
if (pdata && pdata->ata_port_info)
pi = *pdata->ata_port_info;
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv) {
rc = -ENOMEM;
goto err0;
}
hpriv->flags |= (unsigned long)pi.private_data;
hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
if (!hpriv->mmio) {
dev_err(dev, "can't map %pR\n", mem);
rc = -ENOMEM;
goto err0;
}
ahci_save_initial_config(dev, hpriv,
pdata ? pdata->force_port_map : 0,
pdata ? pdata->mask_port_map : 0);
/* prepare host */
if (hpriv->cap & HOST_CAP_NCQ)
pi.flags |= ATA_FLAG_NCQ;
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
ahci_set_em_messages(hpriv, &pi);
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
* both CAP.NP and port_map.
*/
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
if (!host) {
rc = -ENOMEM;
goto err0;
}
host->private_data = hpriv;
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
else
printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
if (pi.flags & ATA_FLAG_EM)
ahci_reset_em(host);
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
ata_port_desc(ap, "mmio %pR", mem);
ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
/* set initial link pm policy */
ap->pm_policy = NOT_AVAILABLE;
/* set enclosure management message type */
if (ap->flags & ATA_FLAG_EM)
ap->em_message_type = ahci_em_messages;
/* disabled/not-implemented port */
if (!(hpriv->port_map & (1 << i)))
ap->ops = &ata_dummy_port_ops;
}
rc = ahci_reset_controller(host);
if (rc)
goto err0;
ahci_init_controller(host);
ahci_print_info(host, "platform");
rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
&ahci_sht);
if (rc)
goto err0;
return 0;
err0:
if (pdata && pdata->exit)
pdata->exit(dev);
return rc;
}
static int __devexit ahci_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_platform_data *pdata = dev->platform_data;
struct ata_host *host = dev_get_drvdata(dev);
ata_host_detach(host);
if (pdata && pdata->exit)
pdata->exit(dev);
return 0;
}
static struct platform_driver ahci_driver = {
.probe = ahci_probe,
.remove = __devexit_p(ahci_remove),
.driver = {
.name = "ahci",
.owner = THIS_MODULE,
},
};
static int __init ahci_init(void)
{
return platform_driver_probe(&ahci_driver, ahci_probe);
}
module_init(ahci_init);
static void __exit ahci_exit(void)
{
platform_driver_unregister(&ahci_driver);
}
module_exit(ahci_exit);
MODULE_DESCRIPTION("AHCI SATA platform driver");
MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:ahci");
/*
* AHCI SATA platform driver
*
* Copyright 2004-2005 Red Hat, Inc.
* Jeff Garzik <jgarzik@pobox.com>
* Copyright 2010 MontaVista Software, LLC.
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*/
#ifndef _AHCI_PLATFORM_H
#define _AHCI_PLATFORM_H
struct device;
struct ata_port_info;
struct ahci_platform_data {
int (*init)(struct device *dev);
void (*exit)(struct device *dev);
const struct ata_port_info *ata_port_info;
unsigned int force_port_map;
unsigned int mask_port_map;
};
#endif /* _AHCI_PLATFORM_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment