Commit 25e11ec4 authored by Florian Fainelli's avatar Florian Fainelli Committed by Greg Kroah-Hartman

USB: regroup all depends on USB within an if USB block

This patch removes the depends on USB from all config symbols in
drivers/usb/host/Kconfig and replace that with an if USB / endif block
as suggested by Alan Stern. Some source ... Kconfig lines have been
shuffled around to permit a better regroupment of the Kconfig files
depending on "config USB" item. No functionnal change is introduced.
Acked-by: 's avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: 's avatarFlorian Fainelli <florian@openwrt.org>
Signed-off-by: 's avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent a2a2d6c7
......@@ -122,9 +122,9 @@ config USB
To compile this driver as a module, choose M here: the
module will be called usbcore.
source "drivers/usb/core/Kconfig"
if USB
source "drivers/usb/dwc3/Kconfig"
source "drivers/usb/core/Kconfig"
source "drivers/usb/mon/Kconfig"
......@@ -134,8 +134,6 @@ source "drivers/usb/host/Kconfig"
source "drivers/usb/musb/Kconfig"
source "drivers/usb/chipidea/Kconfig"
source "drivers/usb/renesas_usbhs/Kconfig"
source "drivers/usb/class/Kconfig"
......@@ -144,12 +142,19 @@ source "drivers/usb/storage/Kconfig"
source "drivers/usb/image/Kconfig"
endif
source "drivers/usb/dwc3/Kconfig"
source "drivers/usb/chipidea/Kconfig"
comment "USB port drivers"
depends on USB
if USB
config USB_USS720
tristate "USS720 parport driver"
depends on USB && PARPORT
depends on PARPORT
select PARPORT_NOT_PC
---help---
This driver is for USB parallel port adapters that use the Lucent
......@@ -180,10 +185,12 @@ source "drivers/usb/serial/Kconfig"
source "drivers/usb/misc/Kconfig"
source "drivers/usb/phy/Kconfig"
source "drivers/usb/atm/Kconfig"
endif # USB
source "drivers/usb/phy/Kconfig"
source "drivers/usb/gadget/Kconfig"
endif # USB_SUPPORT
......@@ -4,7 +4,7 @@
menuconfig USB_ATM
tristate "USB DSL modem support"
depends on USB && ATM
depends on ATM
select CRC32
default n
help
......
......@@ -2,11 +2,10 @@
# USB Class driver configuration
#
comment "USB Device Class drivers"
depends on USB
config USB_ACM
tristate "USB Modem (CDC ACM) support"
depends on USB && TTY
depends on TTY
---help---
This driver supports USB modems and ISDN adapters which support the
Communication Device Class Abstract Control Model interface.
......@@ -21,7 +20,6 @@ config USB_ACM
config USB_PRINTER
tristate "USB Printer support"
depends on USB
help
Say Y here if you want to connect a USB printer to your computer's
USB port.
......@@ -31,7 +29,6 @@ config USB_PRINTER
config USB_WDM
tristate "USB Wireless Device Management support"
depends on USB
---help---
This driver supports the WMC Device Management functionality
of cell phones compliant to the CDC WMC specification. You can use
......@@ -42,7 +39,6 @@ config USB_WDM
config USB_TMC
tristate "USB Test and Measurement Class support"
depends on USB
help
Say Y here if you want to connect a USB device that follows
the USB.org specification for USB Test and Measurement devices
......
......@@ -3,7 +3,6 @@
#
config USB_DEBUG
bool "USB verbose debug messages"
depends on USB
help
Say Y here if you want the USB core & hub drivers to produce a bunch
of debug messages to the system log. Select this if you are having a
......@@ -11,7 +10,6 @@ config USB_DEBUG
config USB_ANNOUNCE_NEW_DEVICES
bool "USB announce new devices"
depends on USB
default N
help
Say Y here if you want the USB core to always announce the
......@@ -25,11 +23,9 @@ config USB_ANNOUNCE_NEW_DEVICES
log, or have any doubts about this, say N here.
comment "Miscellaneous USB options"
depends on USB
config USB_DEFAULT_PERSIST
bool "Enable USB persist by default"
depends on USB
default y
help
Say N here if you don't want USB power session persistance
......@@ -45,7 +41,6 @@ config USB_DEFAULT_PERSIST
config USB_DYNAMIC_MINORS
bool "Dynamic USB minor allocation"
depends on USB
help
If you say Y here, the USB subsystem will use dynamic minor
allocation for any device that uses the USB major number.
......@@ -56,7 +51,6 @@ config USB_DYNAMIC_MINORS
config USB_OTG
bool "OTG support"
depends on USB
depends on USB_SUSPEND
default n
help
......
......@@ -2,11 +2,9 @@
# USB Host Controller Drivers
#
comment "USB Host Controller Drivers"
depends on USB
config USB_C67X00_HCD
tristate "Cypress C67x00 HCD support"
depends on USB
help
The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
host/peripheral/OTG USB controllers.
......@@ -19,7 +17,7 @@ config USB_C67X00_HCD
config USB_XHCI_HCD
tristate "xHCI HCD (USB 3.0) support"
depends on USB && USB_ARCH_HAS_XHCI
depends on USB_ARCH_HAS_XHCI
---help---
The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
"SuperSpeed" host controller hardware.
......@@ -43,7 +41,7 @@ config USB_XHCI_HCD_DEBUGGING
config USB_EHCI_HCD
tristate "EHCI HCD (USB 2.0) support"
depends on USB && USB_ARCH_HAS_EHCI
depends on USB_ARCH_HAS_EHCI
---help---
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
......@@ -280,7 +278,7 @@ config USB_EHCI_ATH79
config USB_OXU210HP_HCD
tristate "OXU210HP HCD support"
depends on USB && GENERIC_HARDIRQS
depends on GENERIC_HARDIRQS
---help---
The OXU210HP is an USB host/OTG/device controller. Enable this
option if your board has this chip. If unsure, say N.
......@@ -293,7 +291,6 @@ config USB_OXU210HP_HCD
config USB_ISP116X_HCD
tristate "ISP116X HCD support"
depends on USB
---help---
The ISP1160 and ISP1161 chips are USB host controllers. Enable this
option if your board has this chip. If unsure, say N.
......@@ -305,7 +302,6 @@ config USB_ISP116X_HCD
config USB_ISP1760_HCD
tristate "ISP 1760 HCD support"
depends on USB
---help---
The ISP1760 chip is a USB 2.0 host controller.
......@@ -320,7 +316,6 @@ config USB_ISP1760_HCD
config USB_ISP1362_HCD
tristate "ISP1362 HCD support"
depends on USB
default N
---help---
Supports the Philips ISP1362 chip as a host controller
......@@ -332,7 +327,7 @@ config USB_ISP1362_HCD
config USB_OHCI_HCD
tristate "OHCI HCD support"
depends on USB && USB_ARCH_HAS_OHCI
depends on USB_ARCH_HAS_OHCI
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
depends on USB_ISP1301 || !ARCH_LPC32XX
---help---
......@@ -490,7 +485,7 @@ config USB_OHCI_LITTLE_ENDIAN
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
depends on USB && (PCI || SPARC_LEON || ARCH_VT8500)
depends on PCI || SPARC_LEON || ARCH_VT8500
---help---
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
......@@ -530,7 +525,7 @@ config USB_UHCI_BIG_ENDIAN_DESC
config USB_FHCI_HCD
tristate "Freescale QE USB Host Controller support"
depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE
depends on OF_GPIO && QE_GPIO && QUICC_ENGINE
select FSL_GTM
select QE_USB
help
......@@ -547,7 +542,7 @@ config FHCI_DEBUG
config USB_U132_HCD
tristate "Elan U132 Adapter Host Controller"
depends on USB && USB_FTDI_ELAN
depends on USB_FTDI_ELAN
default M
help
The U132 adapter is a USB to CardBus adapter specifically designed
......@@ -575,7 +570,6 @@ config USB_U132_HCD
config USB_SL811_HCD
tristate "SL811HS HCD support"
depends on USB
help
The SL811HS is a single-port USB controller that supports either
host side or peripheral side roles. Enable this option if your
......@@ -607,7 +601,6 @@ config USB_SL811_CS
config USB_R8A66597_HCD
tristate "R8A66597 HCD support"
depends on USB
help
The R8A66597 is a USB 2.0 host and peripheral controller.
......@@ -619,7 +612,6 @@ config USB_R8A66597_HCD
config USB_RENESAS_USBHS_HCD
tristate "Renesas USBHS HCD support"
depends on USB
depends on USB_RENESAS_USBHS
help
The Renesas USBHS is a USB 2.0 host and peripheral controller.
......@@ -644,7 +636,7 @@ config USB_WHCI_HCD
config USB_HWA_HCD
tristate "Host Wire Adapter (HWA) driver"
depends on USB && UWB
depends on UWB
select USB_WUSB
select UWB_HWA
help
......@@ -658,7 +650,7 @@ config USB_HWA_HCD
config USB_IMX21_HCD
tristate "i.MX21 HCD support"
depends on USB && ARM && ARCH_MXC
depends on ARM && ARCH_MXC
help
This driver enables support for the on-chip USB host in the
i.MX21 processor.
......@@ -668,7 +660,7 @@ config USB_IMX21_HCD
config USB_OCTEON_EHCI
bool "Octeon on-chip EHCI support"
depends on USB && USB_EHCI_HCD && CPU_CAVIUM_OCTEON
depends on USB_EHCI_HCD && CPU_CAVIUM_OCTEON
default n
select USB_EHCI_BIG_ENDIAN_MMIO
help
......@@ -679,7 +671,7 @@ config USB_OCTEON_EHCI
config USB_OCTEON_OHCI
bool "Octeon on-chip OHCI support"
depends on USB && USB_OHCI_HCD && CPU_CAVIUM_OCTEON
depends on USB_OHCI_HCD && CPU_CAVIUM_OCTEON
default USB_OCTEON_EHCI
select USB_OHCI_BIG_ENDIAN_MMIO
select USB_OHCI_LITTLE_ENDIAN
......
......@@ -2,11 +2,9 @@
# USB Imaging devices configuration
#
comment "USB Imaging devices"
depends on USB
config USB_MDC800
tristate "USB Mustek MDC800 Digital Camera support"
depends on USB
---help---
Say Y here if you want to connect this type of still camera to
your computer's USB port. This driver can be used with gphoto 0.4.3
......@@ -19,7 +17,7 @@ config USB_MDC800
config USB_MICROTEK
tristate "Microtek X6USB scanner support"
depends on USB && SCSI
depends on SCSI
help
Say Y here if you want support for the Microtek X6USB and
possibly the Phantom 336CX, Phantom C6 and ScanMaker V6U(S)L.
......
......@@ -2,11 +2,9 @@
# USB Miscellaneous driver configuration
#
comment "USB Miscellaneous drivers"
depends on USB
config USB_EMI62
tristate "EMI 6|2m USB Audio interface support"
depends on USB
---help---
This driver loads firmware to Emagic EMI 6|2m low latency USB
Audio and Midi interface.
......@@ -21,7 +19,6 @@ config USB_EMI62
config USB_EMI26
tristate "EMI 2|6 USB Audio interface support"
depends on USB
---help---
This driver loads firmware to Emagic EMI 2|6 low latency USB
Audio interface.
......@@ -34,7 +31,6 @@ config USB_EMI26
config USB_ADUTUX
tristate "ADU devices from Ontrak Control Systems"
depends on USB
help
Say Y if you want to use an ADU device from Ontrak Control
Systems.
......@@ -44,7 +40,6 @@ config USB_ADUTUX
config USB_SEVSEG
tristate "USB 7-Segment LED Display"
depends on USB
help
Say Y here if you have a USB 7-Segment Display by Delcom
......@@ -53,7 +48,6 @@ config USB_SEVSEG
config USB_RIO500
tristate "USB Diamond Rio500 support"
depends on USB
help
Say Y here if you want to connect a USB Rio500 mp3 player to your
computer's USB port. Please read <file:Documentation/usb/rio.txt>
......@@ -64,7 +58,6 @@ config USB_RIO500
config USB_LEGOTOWER
tristate "USB Lego Infrared Tower support"
depends on USB
help
Say Y here if you want to connect a USB Lego Infrared Tower to your
computer's USB port.
......@@ -77,7 +70,6 @@ config USB_LEGOTOWER
config USB_LCD
tristate "USB LCD driver support"
depends on USB
help
Say Y here if you want to connect an USBLCD to your computer's
USB port. The USBLCD is a small USB interface board for
......@@ -89,7 +81,6 @@ config USB_LCD
config USB_LED
tristate "USB LED driver support"
depends on USB
help
Say Y here if you want to connect an USBLED device to your
computer's USB port.
......@@ -99,7 +90,6 @@ config USB_LED
config USB_CYPRESS_CY7C63
tristate "Cypress CY7C63xxx USB driver support"
depends on USB
help
Say Y here if you want to connect a Cypress CY7C63xxx
micro controller to your computer's USB port. Currently this
......@@ -113,7 +103,6 @@ config USB_CYPRESS_CY7C63
config USB_CYTHERM
tristate "Cypress USB thermometer driver support"
depends on USB
help
Say Y here if you want to connect a Cypress USB thermometer
device to your computer's USB port. This device is also known
......@@ -126,7 +115,6 @@ config USB_CYTHERM
config USB_IDMOUSE
tristate "Siemens ID USB Mouse Fingerprint sensor support"
depends on USB
help
Say Y here if you want to use the fingerprint sensor on
the Siemens ID Mouse. There is also a Siemens ID Mouse
......@@ -140,7 +128,6 @@ config USB_IDMOUSE
config USB_FTDI_ELAN
tristate "Elan PCMCIA CardBus Adapter USB Client"
depends on USB
default M
help
ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
......@@ -164,7 +151,6 @@ config USB_FTDI_ELAN
config USB_APPLEDISPLAY
tristate "Apple Cinema Display support"
depends on USB
select BACKLIGHT_LCD_SUPPORT
select BACKLIGHT_CLASS_DEVICE
help
......@@ -175,7 +161,6 @@ source "drivers/usb/misc/sisusbvga/Kconfig"
config USB_LD
tristate "USB LD driver"
depends on USB
help
This driver is for generic USB devices that use interrupt transfers,
like LD Didactic's USB devices.
......@@ -185,7 +170,6 @@ config USB_LD
config USB_TRANCEVIBRATOR
tristate "PlayStation 2 Trance Vibrator driver support"
depends on USB
help
Say Y here if you want to connect a PlayStation 2 Trance Vibrator
device to your computer's USB port.
......@@ -195,7 +179,6 @@ config USB_TRANCEVIBRATOR
config USB_IOWARRIOR
tristate "IO Warrior driver support"
depends on USB
help
Say Y here if you want to support the IO Warrior devices from Code
Mercenaries. This includes support for the following devices:
......@@ -209,7 +192,6 @@ config USB_IOWARRIOR
config USB_TEST
tristate "USB testing driver"
depends on USB
help
This driver is for testing host controller software. It is used
with specialized device firmware for regression and stress testing,
......@@ -220,7 +202,6 @@ config USB_TEST
config USB_ISIGHTFW
tristate "iSight firmware loading support"
depends on USB
select FW_LOADER
help
This driver loads firmware for USB Apple iSight cameras, allowing
......@@ -233,7 +214,6 @@ config USB_ISIGHTFW
config USB_YUREX
tristate "USB YUREX driver support"
depends on USB
help
Say Y here if you want to connect a YUREX to your computer's
USB port. The YUREX is a leg-shakes sensor. See
......@@ -246,7 +226,6 @@ config USB_YUREX
config USB_EZUSB_FX2
tristate "Functions for loading firmware on EZUSB chips"
depends on USB
help
Say Y here if you need EZUSB device support.
(Cypress FX/FX2/FX2LP microcontrollers)
......
config USB_SISUSBVGA
tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
depends on USB && (USB_MUSB_HDRC || USB_EHCI_HCD)
depends on (USB_MUSB_HDRC || USB_EHCI_HCD)
---help---
Say Y here if you intend to attach a USB2VGA dongle based on a
Net2280 and a SiS315 chip.
......
......@@ -4,7 +4,6 @@
config USB_MON
tristate "USB Monitor"
depends on USB
help
If you select this option, a component which captures the USB traffic
between peripheral-specific drivers and HC drivers will be built.
......
......@@ -6,7 +6,7 @@
# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
config USB_MUSB_HDRC
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
depends on USB && USB_GADGET
depends on USB_GADGET
help
Say Y here if your system has a dual role high speed USB
controller based on the Mentor Graphics silicon IP. Then
......
......@@ -4,7 +4,7 @@
config USB_RENESAS_USBHS
tristate 'Renesas USBHS controller'
depends on USB && USB_GADGET && GENERIC_HARDIRQS
depends on USB_GADGET && GENERIC_HARDIRQS
default n
help
Renesas USBHS is a discrete USB host and peripheral controller chip
......
......@@ -4,7 +4,7 @@
menuconfig USB_SERIAL
tristate "USB Serial Converter support"
depends on USB && TTY
depends on TTY
---help---
Say Y here if you have a USB device that provides normal serial
ports, or acts like a serial device, and you want to connect it to
......
......@@ -4,11 +4,10 @@
comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
comment "also be needed; see USB_STORAGE Help for more info"
depends on USB
config USB_STORAGE
tristate "USB Mass Storage support"
depends on USB && SCSI
depends on SCSI
---help---
Say Y here if you want to connect USB mass storage devices to your
computer's USB port. This is the driver you need for USB
......@@ -188,7 +187,7 @@ config USB_STORAGE_CYPRESS_ATACB
config USB_STORAGE_ENE_UB6250
tristate "USB ENE card reader support"
depends on USB && SCSI
depends on SCSI
depends on USB_STORAGE
---help---
Say Y here if you wish to control a ENE SD/MS Card reader.
......@@ -203,7 +202,7 @@ config USB_STORAGE_ENE_UB6250
config USB_UAS
tristate "USB Attached SCSI"
depends on USB && SCSI && BROKEN
depends on SCSI && BROKEN
help
The USB Attached SCSI protocol is supported by some USB
storage devices. It permits higher performance by supporting
......
......@@ -3,7 +3,6 @@
#
config USB_WUSB
tristate "Enable Wireless USB extensions"
depends on USB
depends on PCI
depends on UWB
select CRYPTO
......@@ -19,7 +18,6 @@ config USB_WUSB
config USB_WUSB_CBAF
tristate "Support WUSB Cable Based Association (CBA)"
depends on USB
help
Some WUSB devices support Cable Based Association. It's used to
enable the secure communication between the host and the
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment