Commit 8bc3fc47 authored by Jeff Garzik's avatar Jeff Garzik

libata: bump versions

Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
parent a617c09f
......@@ -46,7 +46,7 @@
#include <linux/libata.h>
#define DRV_NAME "ahci"
#define DRV_VERSION "2.1"
#define DRV_VERSION "2.2"
enum {
......
......@@ -26,7 +26,7 @@
#include <linux/libata.h>
#define DRV_NAME "ata_generic"
#define DRV_VERSION "0.2.11"
#define DRV_VERSION "0.2.12"
/*
* A generic parallel ATA driver using libata
......
......@@ -59,7 +59,7 @@
#include "libata.h"
#define DRV_VERSION "2.20" /* must be exactly four chars */
#define DRV_VERSION "2.21" /* must be exactly four chars */
/* debounce timing parameters in msecs { interval, duration, timeout } */
......
......@@ -28,7 +28,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_artop"
#define DRV_VERSION "0.4.2"
#define DRV_VERSION "0.4.3"
/*
* The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
......
......@@ -31,7 +31,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_cmd64x"
#define DRV_VERSION "0.2.2"
#define DRV_VERSION "0.2.3"
/*
* CMD64x specific registers definition.
......
......@@ -41,7 +41,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_cs5520"
#define DRV_VERSION "0.6.4"
#define DRV_VERSION "0.6.5"
struct pio_clocks
{
......
......@@ -35,7 +35,7 @@
#include <linux/dmi.h>
#define DRV_NAME "pata_cs5530"
#define DRV_VERSION "0.7.2"
#define DRV_VERSION "0.7.3"
static void __iomem *cs5530_port_base(struct ata_port *ap)
{
......
......@@ -39,7 +39,7 @@
#include <asm/msr.h>
#define DRV_NAME "cs5535"
#define DRV_VERSION "0.2.11"
#define DRV_VERSION "0.2.12"
/*
* The Geode (Aka Athlon GX now) uses an internal MSR based
......
......@@ -18,7 +18,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_cypress"
#define DRV_VERSION "0.1.4"
#define DRV_VERSION "0.1.5"
/* here are the offset definitions for the registers */
......
......@@ -23,7 +23,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x3"
#define DRV_VERSION "0.4.2"
#define DRV_VERSION "0.4.3"
/**
* hpt3x3_set_piomode - PIO setup
......
......@@ -17,7 +17,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_isapnp"
#define DRV_VERSION "0.2.0"
#define DRV_VERSION "0.2.1"
static struct scsi_host_template isapnp_sht = {
.module = THIS_MODULE,
......
......@@ -19,7 +19,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_it8213"
#define DRV_VERSION "0.0.2"
#define DRV_VERSION "0.0.3"
/**
* it8213_pre_reset - check for 40/80 pin
......
......@@ -23,7 +23,7 @@
#include <scsi/scsi_host.h>
#define DRV_NAME "pata_ixp4xx_cf"
#define DRV_VERSION "0.1.2"
#define DRV_VERSION "0.1.3"
static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
{
......
......@@ -19,7 +19,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_jmicron"
#define DRV_VERSION "0.1.4"
#define DRV_VERSION "0.1.5"
typedef enum {
PORT_PATA0 = 0,
......
......@@ -64,7 +64,7 @@
#include <linux/platform_device.h>
#define DRV_NAME "pata_legacy"
#define DRV_VERSION "0.5.4"
#define DRV_VERSION "0.5.5"
#define NR_HOST 6
......
......@@ -22,7 +22,7 @@
#include <linux/pata_platform.h>
#define DRV_NAME "pata_platform"
#define DRV_VERSION "0.1.2"
#define DRV_VERSION "1.0"
static int pio_mask = 1;
......
......@@ -26,7 +26,7 @@
#include <linux/platform_device.h>
#define DRV_NAME "pata_qdi"
#define DRV_VERSION "0.3.0"
#define DRV_VERSION "0.3.1"
#define NR_HOST 4 /* Two 6580s */
......
......@@ -21,7 +21,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_rz1000"
#define DRV_VERSION "0.2.3"
#define DRV_VERSION "0.2.4"
/**
......
......@@ -40,7 +40,7 @@
#include <linux/libata.h>
#define DRV_NAME "sc1200"
#define DRV_VERSION "0.2.4"
#define DRV_VERSION "0.2.5"
#define SC1200_REV_A 0x00
#define SC1200_REV_B1 0x01
......
......@@ -43,7 +43,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_scc"
#define DRV_VERSION "0.1"
#define DRV_VERSION "0.2"
#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
......
......@@ -41,7 +41,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_serverworks"
#define DRV_VERSION "0.4.0"
#define DRV_VERSION "0.4.1"
#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
......
......@@ -26,7 +26,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_sl82c105"
#define DRV_VERSION "0.3.0"
#define DRV_VERSION "0.3.1"
enum {
/*
......
......@@ -16,7 +16,7 @@
#include <linux/platform_device.h>
#define DRV_NAME "pata_winbond"
#define DRV_VERSION "0.0.2"
#define DRV_VERSION "0.0.3"
#define NR_HOST 4 /* Two winbond controllers, two channels each */
......
......@@ -44,7 +44,7 @@
#include <linux/libata.h>
#define DRV_NAME "pdc_adma"
#define DRV_VERSION "0.05"
#define DRV_VERSION "0.06"
/* macro to calculate base address for ATA regs */
#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40))
......
......@@ -28,7 +28,7 @@
#include <scsi/scsi_device.h>
#define DRV_NAME "sata_inic162x"
#define DRV_VERSION "0.1"
#define DRV_VERSION "0.2"
enum {
MMIO_BAR = 5,
......
......@@ -35,7 +35,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
#define DRV_VERSION "0.8"
#define DRV_VERSION "0.81"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
......
......@@ -49,7 +49,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_nv"
#define DRV_VERSION "3.3"
#define DRV_VERSION "3.4"
#define NV_ADMA_DMA_BOUNDARY 0xffffffffUL
......
......@@ -39,7 +39,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_qstor"
#define DRV_VERSION "0.07"
#define DRV_VERSION "0.08"
enum {
QS_MMIO_BAR = 4,
......
......@@ -30,7 +30,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_sil24"
#define DRV_VERSION "0.8"
#define DRV_VERSION "0.9"
/*
* Port request block (PRB) 32 bytes
......
......@@ -43,7 +43,7 @@
#include "sis.h"
#define DRV_NAME "sata_sis"
#define DRV_VERSION "0.7"
#define DRV_VERSION "0.8"
enum {
sis_180 = 0,
......
......@@ -53,7 +53,7 @@
#endif /* CONFIG_PPC_OF */
#define DRV_NAME "sata_svw"
#define DRV_VERSION "2.1"
#define DRV_VERSION "2.2"
enum {
/* ap->flags bits */
......
......@@ -44,7 +44,7 @@
#include "sata_promise.h"
#define DRV_NAME "sata_sx4"
#define DRV_VERSION "0.10"
#define DRV_VERSION "0.11"
enum {
......
......@@ -36,7 +36,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_uli"
#define DRV_VERSION "1.1"
#define DRV_VERSION "1.2"
enum {
uli_5289 = 0,
......
......@@ -46,7 +46,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_via"
#define DRV_VERSION "2.1"
#define DRV_VERSION "2.2"
enum board_ids_enum {
vt6420,
......
......@@ -47,7 +47,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_vsc"
#define DRV_VERSION "2.1"
#define DRV_VERSION "2.2"
enum {
VSC_MMIO_BAR = 0,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment