Commit 8fe2b65a authored by Michael Buesch's avatar Michael Buesch Committed by John W. Linville

ssb: Turn suspend/resume upside down

Turn the SSB bus suspend mechanism upside down.
Instead of deciding by an internal reference count when to suspend/resume,
let the parent bus call us in their suspend/resume routine.
Signed-off-by: default avatarMichael Buesch <mb@bu3sch.de>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 5100d5ac
......@@ -43,14 +43,16 @@ MODULE_DEVICE_TABLE(pcmcia, b43_pcmcia_tbl);
#ifdef CONFIG_PM
static int b43_pcmcia_suspend(struct pcmcia_device *dev)
{
//TODO
return 0;
struct ssb_bus *ssb = dev->priv;
return ssb_bus_suspend(ssb);
}
static int b43_pcmcia_resume(struct pcmcia_device *dev)
{
//TODO
return 0;
struct ssb_bus *ssb = dev->priv;
return ssb_bus_resume(ssb);
}
#else /* CONFIG_PM */
# define b43_pcmcia_suspend NULL
......
......@@ -251,7 +251,7 @@ void ssb_chipcommon_init(struct ssb_chipcommon *cc)
calc_fast_powerup_delay(cc);
}
void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state)
void ssb_chipco_suspend(struct ssb_chipcommon *cc)
{
if (!cc->dev)
return;
......
......@@ -120,35 +120,12 @@ static void ssb_device_put(struct ssb_device *dev)
put_device(dev->dev);
}
static int ssb_bus_resume(struct ssb_bus *bus)
{
int err;
ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
err = ssb_pcmcia_init(bus);
if (err) {
/* No need to disable XTAL, as we don't have one on PCMCIA. */
return err;
}
ssb_chipco_resume(&bus->chipco);
return 0;
}
static int ssb_device_resume(struct device *dev)
{
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
struct ssb_driver *ssb_drv;
struct ssb_bus *bus;
int err = 0;
bus = ssb_dev->bus;
if (bus->suspend_cnt == bus->nr_devices) {
err = ssb_bus_resume(bus);
if (err)
return err;
}
bus->suspend_cnt--;
if (dev->driver) {
ssb_drv = drv_to_ssb_drv(dev->driver);
if (ssb_drv && ssb_drv->resume)
......@@ -160,27 +137,10 @@ out:
return err;
}
static void ssb_bus_suspend(struct ssb_bus *bus, pm_message_t state)
{
ssb_chipco_suspend(&bus->chipco, state);
ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
/* Reset HW state information in memory, so that HW is
* completely reinitialized on resume. */
bus->mapped_device = NULL;
#ifdef CONFIG_SSB_DRIVER_PCICORE
bus->pcicore.setup_done = 0;
#endif
#ifdef CONFIG_SSB_DEBUG
bus->powered_up = 0;
#endif
}
static int ssb_device_suspend(struct device *dev, pm_message_t state)
{
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
struct ssb_driver *ssb_drv;
struct ssb_bus *bus;
int err = 0;
if (dev->driver) {
......@@ -190,17 +150,44 @@ static int ssb_device_suspend(struct device *dev, pm_message_t state)
if (err)
goto out;
}
out:
return err;
}
int ssb_bus_resume(struct ssb_bus *bus)
{
int err;
bus = ssb_dev->bus;
bus->suspend_cnt++;
if (bus->suspend_cnt == bus->nr_devices) {
/* All devices suspended. Shutdown the bus. */
ssb_bus_suspend(bus, state);
/* Reset HW state information in memory, so that HW is
* completely reinitialized. */
bus->mapped_device = NULL;
#ifdef CONFIG_SSB_DRIVER_PCICORE
bus->pcicore.setup_done = 0;
#endif
err = ssb_bus_powerup(bus, 0);
if (err)
return err;
err = ssb_pcmcia_hardware_setup(bus);
if (err) {
ssb_bus_may_powerdown(bus);
return err;
}
ssb_chipco_resume(&bus->chipco);
ssb_bus_may_powerdown(bus);
out:
return err;
return 0;
}
EXPORT_SYMBOL(ssb_bus_resume);
int ssb_bus_suspend(struct ssb_bus *bus)
{
ssb_chipco_suspend(&bus->chipco);
ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
return 0;
}
EXPORT_SYMBOL(ssb_bus_suspend);
#ifdef CONFIG_SSB_PCIHOST
int ssb_devices_freeze(struct ssb_bus *bus)
......
......@@ -18,6 +18,12 @@
#ifdef CONFIG_PM
static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
{
struct ssb_bus *ssb = pci_get_drvdata(dev);
int err;
err = ssb_bus_suspend(ssb);
if (err)
return err;
pci_save_state(dev);
pci_disable_device(dev);
pci_set_power_state(dev, pci_choose_state(dev, state));
......@@ -27,6 +33,7 @@ static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
static int ssb_pcihost_resume(struct pci_dev *dev)
{
struct ssb_bus *ssb = pci_get_drvdata(dev);
int err;
pci_set_power_state(dev, 0);
......@@ -34,6 +41,9 @@ static int ssb_pcihost_resume(struct pci_dev *dev)
if (err)
return err;
pci_restore_state(dev);
err = ssb_bus_resume(ssb);
if (err)
return err;
return 0;
}
......
......@@ -684,6 +684,29 @@ static int ssb_pcmcia_cor_setup(struct ssb_bus *bus, u8 cor)
return 0;
}
/* Initialize the PCMCIA hardware. This is called on Init and Resume. */
int ssb_pcmcia_hardware_setup(struct ssb_bus *bus)
{
int err;
if (bus->bustype != SSB_BUSTYPE_PCMCIA)
return 0;
/* Switch segment to a known state and sync
* bus->mapped_pcmcia_seg with hardware state. */
ssb_pcmcia_switch_segment(bus, 0);
/* Init the COR register. */
err = ssb_pcmcia_cor_setup(bus, CISREG_COR);
if (err)
return err;
/* Some cards also need this register to get poked. */
err = ssb_pcmcia_cor_setup(bus, CISREG_COR + 0x80);
if (err)
return err;
return 0;
}
void ssb_pcmcia_exit(struct ssb_bus *bus)
{
if (bus->bustype != SSB_BUSTYPE_PCMCIA)
......@@ -699,16 +722,7 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
if (bus->bustype != SSB_BUSTYPE_PCMCIA)
return 0;
/* Switch segment to a known state and sync
* bus->mapped_pcmcia_seg with hardware state. */
ssb_pcmcia_switch_segment(bus, 0);
/* Init the COR register. */
err = ssb_pcmcia_cor_setup(bus, CISREG_COR);
if (err)
goto error;
/* Some cards also need this register to get poked. */
err = ssb_pcmcia_cor_setup(bus, CISREG_COR + 0x80);
err = ssb_pcmcia_hardware_setup(bus);
if (err)
goto error;
......
......@@ -81,6 +81,7 @@ extern int ssb_pcmcia_switch_segment(struct ssb_bus *bus,
u8 seg);
extern int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv);
extern int ssb_pcmcia_hardware_setup(struct ssb_bus *bus);
extern void ssb_pcmcia_exit(struct ssb_bus *bus);
extern int ssb_pcmcia_init(struct ssb_bus *bus);
extern const struct ssb_bus_ops ssb_pcmcia_ops;
......@@ -100,6 +101,10 @@ static inline int ssb_pcmcia_switch_segment(struct ssb_bus *bus,
{
return 0;
}
static inline int ssb_pcmcia_hardware_setup(struct ssb_bus *bus)
{
return 0;
}
static inline void ssb_pcmcia_exit(struct ssb_bus *bus)
{
}
......
......@@ -260,9 +260,6 @@ struct ssb_bus {
struct ssb_device devices[SSB_MAX_NR_CORES];
u8 nr_devices;
/* Reference count. Number of suspended devices. */
u8 suspend_cnt;
/* Software ID number for this bus. */
unsigned int busnumber;
......@@ -334,6 +331,13 @@ extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
extern void ssb_bus_unregister(struct ssb_bus *bus);
/* Suspend a SSB bus.
* Call this from the parent bus suspend routine. */
extern int ssb_bus_suspend(struct ssb_bus *bus);
/* Resume a SSB bus.
* Call this from the parent bus resume routine. */
extern int ssb_bus_resume(struct ssb_bus *bus);
extern u32 ssb_clockspeed(struct ssb_bus *bus);
/* Is the device enabled in hardware? */
......
......@@ -367,8 +367,7 @@ static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
#include <linux/pm.h>
extern void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state);
extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
extern void ssb_chipco_resume(struct ssb_chipcommon *cc);
extern void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment