[GITLAB] - UPGRADE TO v12 on Wednesday the 18th of December at 11.30AM

  1. 14 Oct, 2011 1 commit
  2. 23 Jul, 2011 1 commit
    • Joe Perches's avatar
      ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level> · a9a79dfe
      Joe Perches authored
      Saves text by removing nearly duplicated text format strings by
      creating ata_<foo>_printk functions and printf extension %pV.
      
      ata defconfig size shrinks ~5% (~8KB), allyesconfig ~2.5% (~13KB)
      
      Format string duplication comes from:
      
       #define ata_link_printk(link, lv, fmt, args...) do { \
             if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link)    \
                     printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id,   \
                            (link)->pmp , ##args); \
             else \
                     printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \
             } while(0)
      
      Coalesce long formats.
      
      $ size drivers/ata/built-in.*
         text	   data	    bss	    dec	    hex	filename
       544969	  73893	 116584	 735446	  b38d6	drivers/ata/built-in.allyesconfig.ata.o
       558429	  73893	 117864	 750186	  b726a	drivers/ata/built-in.allyesconfig.dev_level.o
       141328	  14689	   4220	 160237	  271ed	drivers/ata/built-in.defconfig.ata.o
       149567	  14689	   4220	 168476	  2921c	drivers/ata/built-in.defconfig.dev_level.o
      Signed-off-by: 's avatarJoe Perches <joe@perches.com>
      Signed-off-by: 's avatarJeff Garzik <jgarzik@pobox.com>
      a9a79dfe
  3. 25 May, 2010 1 commit
  4. 19 May, 2010 1 commit
    • Tejun Heo's avatar
      libata-sff: clean up BMDMA initialization · c7087652
      Tejun Heo authored
      When BMDMA initialization failed or BMDMA was not available for
      whatever reason, bmdma_addr was left at zero and used as an indication
      that BMDMA shouldn't be used.  This leads to the following problems.
      
      p1. For BMDMA drivers which don't use traditional BMDMA register,
          ata_bmdma_mode_filter() incorrectly inhibits DMA modes.  Those
          drivers either have to inherit from ata_sff_port_ops or clear
          ->mode_filter explicitly.
      
      p2. non-BMDMA drivers call into BMDMA PRD table allocation.  It
          doesn't actually allocate PRD table if bmdma_addr is not
          initialized but is still confusing.
      
      p3. For BMDMA drivers which don't use traditional BMDMA register, some
          methods might not be invoked as expected (e.g. bmdma_stop from
          ata_sff_post_internal_cmd()).
      
      p4. SFF drivers w/ custom DMA interface implement noop BMDMA ops
          worrying libata core might call into one of them.
      
      These problems are caused by the muddy line between SFF and BMDMA and
      the assumption that all BMDMA controllers initialize bmdma_addr.
      
      This patch fixes p1 and p2 by removing the bmdma_addr assumption and
      moving prd allocation to BMDMA port start.  Later patches will fix the
      remaining issues.
      
      This patch improves BMDMA initialization such that
      
      * When BMDMA register initialization fails, falls back to PIO instead
        of failing.  ata_pci_bmdma_init() never fails now.
      
      * When ata_pci_bmdma_init() falls back to PIO, it clears
        ap->mwdma_mask and udma_mask instead of depending on
        ata_bmdma_mode_filter().  This makes ata_bmdma_mode_filter()
        unnecessary thus resolving p1.
      
      * ata_port_start() which actually is BMDMA specific is moved to
        ata_bmdma_port_start().  ata_port_start() and ata_sff_port_start()
        are killed.
      
      * ata_sff_port_start32() is moved and renamed to
        ata_bmdma_port_start32().
      
      Drivers which no longer call into PRD table allocation are...
      
        pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all
        drivers which inherit from ata_sff_port_ops.
      
      pata_icside sets ->port_start to ATA_OP_NULL as it doesn't need PRD
      but is a BMDMA controller and doesn't have custom port_start like
      other such controllers.
      
      Note that with the previous patch which makes all and only BMDMA
      drivers inherit from ata_bmdma_port_ops, this change doesn't break
      drivers which need PRD table.
      Signed-off-by: 's avatarTejun Heo <tj@kernel.org>
      Signed-off-by: 's avatarJeff Garzik <jgarzik@redhat.com>
      c7087652
  5. 01 Mar, 2010 2 commits
  6. 03 Dec, 2009 1 commit
  7. 06 Oct, 2009 1 commit
  8. 05 Jun, 2009 1 commit
  9. 25 Mar, 2009 1 commit
  10. 16 Jan, 2009 1 commit
  11. 08 Jan, 2009 3 commits
  12. 28 Oct, 2008 1 commit
  13. 31 Jul, 2008 1 commit
    • Ben Dooks's avatar
      pata_ali: misplaced pci_dev_put() · e8389f0c
      Ben Dooks authored
      The ali_init_one() function does a search for an isa_bridge,
      but then fails to release it if the revision information was
      not correctly found.
      
      the problem comes from:
      	isa_bridge = pci_get_device(...);
      	if (isa_bridge && ...) {
      		pci_dev_put(isa_bridge);
      	}
      
      where the pci_dev_put() is never called if isa_bridge
      was valid but the extra checks on the chip-revision
      fail to match.
      Signed-off-by: 's avatarBen Dooks <ben-linux@fluff.org>
      Signed-off-by: 's avatarJeff Garzik <jgarzik@redhat.com>
      e8389f0c
  14. 19 May, 2008 1 commit
  15. 17 Apr, 2008 7 commits
    • Tejun Heo's avatar
      libata: rename SFF functions · 9363c382
      Tejun Heo authored
      SFF functions have confusing names.  Some have sff prefix, some have
      bmdma, some std, some pci and some none.  Unify the naming by...
      
      * SFF functions which are common to both BMDMA and non-BMDMA are
        prefixed with ata_sff_.
      
      * SFF functions which are specific to BMDMA are prefixed with
        ata_bmdma_.
      
      * SFF functions which are specific to PCI but apply to both BMDMA and
        non-BMDMA are prefixed with ata_pci_sff_.
      
      * SFF functions which are specific to PCI and BMDMA are prefixed with
        ata_pci_bmdma_.
      
      * Drop generic prefixes from LLD specific routines.  For example,
        bfin_std_dev_select -> bfin_dev_select.
      
      The following renames are noteworthy.
      
        ata_qc_issue_prot() -> ata_sff_qc_issue()
        ata_pci_default_filter() -> ata_bmdma_mode_filter()
        ata_dev_try_classify() -> ata_sff_dev_classify()
      
      This rename is in preparation of separating SFF support out of libata
      core layer.  This patch strictly renames functions and doesn't
      introduce any behavior difference.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      9363c382
    • Tejun Heo's avatar
      libata: stop overloading port_info->private_data · 887125e3
      Tejun Heo authored
      port_info->private_data is currently used for two purposes - to record
      private data about the port_info or to specify host->private_data to
      use when allocating ata_host.
      
      This overloading is confusing and counter-intuitive in that
      port_info->private_data becomes host->private_data instead of
      port->private_data.  In addition, port_info and host don't correspond
      to each other 1-to-1.  Currently, the first non-NULL
      port_info->private_data is used.
      
      This patch makes port_info->private_data just be what it is -
      private_data for the port_info where LLD can jot down extra info.
      libata no longer sets host->private_data to the first non-NULL
      port_info->private_data, @host_priv argument is added to
      ata_pci_init_one() instead.  LLDs which use ata_pci_init_one() can use
      this argument to pass in pointer to host private data.  LLDs which
      don't should use init-register model anyway and can initialize
      host->private_data directly.
      
      Adding @host_priv instead of using init-register model for LLDs which
      use ata_pci_init_one() is suggested by Alan Cox.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
      887125e3
    • Tejun Heo's avatar
      libata: make ata_pci_init_one() not use ops->irq_handler and pi->sht · 1bd5b715
      Tejun Heo authored
      ata_pci_init_one() is the only function which uses ops->irq_handler
      and pi->sht.  Other initialization functions take the same information
      as arguments.  This causes confusion and duplicate unused entries in
      structures.
      
      Make ata_pci_init_one() take sht as an argument and use ata_interrupt
      implicitly.  All current users use ata_interrupt and if different irq
      handler is necessary open coding ata_pci_init_one() using
      ata_prepare_sff_host() and ata_activate_sff_host can be done under ten
      lines including error handling and driver which requires custom
      interrupt handler is likely to require custom initialization anyway.
      
      As ata_pci_init_one() was the last user of ops->irq_handler, this
      patch also kills the field.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      1bd5b715
    • Tejun Heo's avatar
      libata: implement and use ops inheritance · 029cfd6b
      Tejun Heo authored
      libata lets low level drivers build ata_port_operations table and
      register it with libata core layer.  This allows low level drivers
      high level of flexibility but also burdens them with lots of
      boilerplate entries.
      
      This becomes worse for drivers which support related similar
      controllers which differ slightly.  They share most of the operations
      except for a few.  However, the driver still needs to list all
      operations for each variant.  This results in large number of
      duplicate entries, which is not only inefficient but also error-prone
      as it becomes very difficult to tell what the actual differences are.
      
      This duplicate boilerplates all over the low level drivers also make
      updating the core layer exteremely difficult and error-prone.  When
      compounded with multi-branched development model, it ends up
      accumulating inconsistencies over time.  Some of those inconsistencies
      cause immediate problems and fixed.  Others just remain there dormant
      making maintenance increasingly difficult.
      
      To rectify the problem, this patch implements ata_port_operations
      inheritance.  To allow LLDs to easily re-use their own ops tables
      overriding only specific methods, this patch implements poor man's
      class inheritance.  An ops table has ->inherits field which can be set
      to any ops table as long as it doesn't create a loop.  When the host
      is started, the inheritance chain is followed and any operation which
      isn't specified is taken from the nearest ancestor which has it
      specified.  This operation is called finalization and done only once
      per an ops table and the LLD doesn't have to do anything special about
      it other than making the ops table non-const such that libata can
      update it.
      
      libata provides four base ops tables lower drivers can inherit from -
      base, sata, pmp, sff and bmdma.  To avoid overriding these ops
      accidentaly, these ops are declared const and LLDs should always
      inherit these instead of using them directly.
      
      After finalization, all the ops table are identical before and after
      the patch except for setting .irq_handler to ata_interrupt in drivers
      which didn't use to.  The .irq_handler doesn't have any actual effect
      and the field will soon be removed by later patch.
      
      * sata_sx4 is still using old style EH and currently doesn't take
        advantage of ops inheritance.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      029cfd6b
    • Tejun Heo's avatar
      libata: implement and use SHT initializers · 68d1d07b
      Tejun Heo authored
      libata lets low level drivers build scsi_host_template and register it
      to the SCSI layer.  This allows low level drivers high level of
      flexibility but also burdens them with lots of boilerplate entries.
      
      This patch implements SHT initializers which can be used to initialize
      all the boilerplate entries in a sht.  Three variants of them are
      implemented - BASE, BMDMA and NCQ - for different types of drivers.
      Note that entries can be overriden by putting individual initializers
      after the helper macro.
      
      All sht tables are identical before and after this patch.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      68d1d07b
    • Tejun Heo's avatar
      libata: implement and use ata_noop_irq_clear() · 358f9a77
      Tejun Heo authored
      ->irq_clear() is used to clear IRQ bit of a SFF controller and isn't
      useful for drivers which don't use libata SFF HSM implementation.
      However, it's a required callback and many drivers implement their own
      noop version as placeholder.  This patch implements ata_noop_irq_clear
      and use it to replace those custom placeholders.
      
      Also, SFF drivers which don't support BMDMA don't need to use
      ata_bmdma_irq_clear().  It becomes noop if BMDMA address isn't
      initialized.  Convert them to use ata_noop_irq_clear().
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      358f9a77
    • Tejun Heo's avatar
      libata: PCI device should be powered up before being accessed · f08048e9
      Tejun Heo authored
      PCI device should be powered up or powered up before its PCI regsiters
      are accessed.  Although PCI configuration register access is allowed
      in D3hot, PCI device is free to reset its status when transiting from
      D3hot to D0 causing configuration data to change.
      
      Many libata SFF drivers which use ata_pci_init_one() read and update
      configuration registers before calling ata_pci_init_one() which
      enables the PCI device.  Also, in resume paths, some drivers access
      registers without resuming the PCI device.
      
      This patch adds a call to pcim_enable_device() in init path if
      register is accessed before calling ata_pci_init_one() and make resume
      paths first resume PCI devices, access PCI configuration regiters then
      resume ATA host.
      
      While at it...
      
      * cmd640 was strange in that it set ->resume even when CONFIG_PM is
        not.  This is by-product of minimal build fix.  Updated.
      
      * In cs5530, Don't BUG() on reinit failure.  Just whine and fail
        resume.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      f08048e9
  16. 12 Apr, 2008 1 commit
  17. 04 Apr, 2008 1 commit
    • Tejun Heo's avatar
      pata_ali: disable ATAPI DMA · 8243e636
      Tejun Heo authored
      ATAPI DMA just doesn't work reliably on pata_ali.  The IDE driver can
      do it but for some mysterious reason, pata_ali can't.  This patch
      disables it by default and makes the driver whine during
      initialization.  "pata_ali.atapi_dma" parameter is added so that user
      can bypass the workaround.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      8243e636
  18. 17 Mar, 2008 1 commit
  19. 23 Jan, 2008 1 commit
  20. 24 Nov, 2007 3 commits
  21. 12 Oct, 2007 3 commits
  22. 10 Oct, 2007 1 commit
    • Jeff Garzik's avatar
      drivers/firmware: const-ify DMI API and internals · 1855256c
      Jeff Garzik authored
      Three main sets of changes:
      
      1) dmi_get_system_info() return value should have been marked const,
         since callers should not be changing that data.
      
      2) const-ify DMI internals, since DMI firmware tables should,
         whenever possible, be marked const to ensure we never ever write to
         that data area.
      
      3) const-ify DMI API, to enable marking tables const where possible
         in low-level drivers.
      
      And if we're really lucky, this might enable some additional
      optimizations on the part of the compiler.
      
      The bulk of the changes are #2 and #3, which are interrelated.  #1 could
      have been a separate patch, but it was so small compared to the others,
      it was easier to roll it into this changeset.
      Signed-off-by: 's avatarJeff Garzik <jgarzik@redhat.com>
      1855256c
  23. 11 Sep, 2007 1 commit
  24. 31 Aug, 2007 1 commit
  25. 24 Jul, 2007 1 commit
  26. 11 Jul, 2007 1 commit
    • Auke Kok's avatar
      PCI: Change all drivers to use pci_device->revision · 44c10138
      Auke Kok authored
      Instead of all drivers reading pci config space to get the revision
      ID, they can now use the pci_device->revision member.
      
      This exposes some issues where drivers where reading a word or a dword
      for the revision number, and adding useless error-handling around the
      read. Some drivers even just read it for no purpose of all.
      
      In devices where the revision ID is being copied over and used in what
      appears to be the equivalent of hotpath, I have left the copy code
      and the cached copy as not to influence the driver's performance.
      
      Compile tested with make all{yes,mod}config on x86_64 and i386.
      Signed-off-by: 's avatarAuke Kok <auke-jan.h.kok@intel.com>
      Acked-by: 's avatarDave Jones <davej@redhat.com>
      Signed-off-by: 's avatarGreg Kroah-Hartman <gregkh@suse.de>
      44c10138
  27. 09 Jul, 2007 1 commit