1. 25 Jul, 2012 1 commit
    • Axel Lin's avatar
      ata: use module_pci_driver · 2fc75da0
      Axel Lin authored
      This patch converts the drivers in drivers/ata/* to use module_pci_driver()
      macro which makes the code smaller and a bit simpler.
      Signed-off-by: 's avatarAxel Lin <axel.lin@gmail.com>
      Cc: Alan Cox <alan@linux.intel.com>
      Cc: Jeff Garzik <jgarzik@pobox.com>
      Cc: Mikael Pettersson <mikpe@it.uu.se>
      Cc: Mark Lord <kernel@teksavvy.com>
      Cc: Jeremy Higdon <jeremy@sgi.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: 's avatarJeff Garzik <jgarzik@redhat.com>
      2fc75da0
  2. 22 May, 2012 1 commit
  3. 23 Jul, 2011 1 commit
    • Joe Perches's avatar
      ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level> · a9a79dfe
      Joe Perches authored
      Saves text by removing nearly duplicated text format strings by
      creating ata_<foo>_printk functions and printf extension %pV.
      
      ata defconfig size shrinks ~5% (~8KB), allyesconfig ~2.5% (~13KB)
      
      Format string duplication comes from:
      
       #define ata_link_printk(link, lv, fmt, args...) do { \
             if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link)    \
                     printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id,   \
                            (link)->pmp , ##args); \
             else \
                     printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \
             } while(0)
      
      Coalesce long formats.
      
      $ size drivers/ata/built-in.*
         text	   data	    bss	    dec	    hex	filename
       544969	  73893	 116584	 735446	  b38d6	drivers/ata/built-in.allyesconfig.ata.o
       558429	  73893	 117864	 750186	  b726a	drivers/ata/built-in.allyesconfig.dev_level.o
       141328	  14689	   4220	 160237	  271ed	drivers/ata/built-in.defconfig.ata.o
       149567	  14689	   4220	 168476	  2921c	drivers/ata/built-in.defconfig.dev_level.o
      Signed-off-by: 's avatarJoe Perches <joe@perches.com>
      Signed-off-by: 's avatarJeff Garzik <jgarzik@pobox.com>
      a9a79dfe
  4. 02 Mar, 2011 1 commit
  5. 22 Oct, 2010 1 commit
  6. 01 Aug, 2010 1 commit
  7. 01 Jul, 2010 2 commits
  8. 25 May, 2010 1 commit
  9. 01 Mar, 2010 1 commit
  10. 03 Dec, 2009 1 commit
  11. 25 Mar, 2009 1 commit
  12. 29 Dec, 2008 1 commit
    • Tejun Heo's avatar
      libata: beef up iterators · 1eca4365
      Tejun Heo authored
      There currently are the following looping constructs.
      
      * __ata_port_for_each_link() for all available links
      * ata_port_for_each_link() for edge links
      * ata_link_for_each_dev() for all devices
      * ata_link_for_each_dev_reverse() for all devices in reverse order
      
      Now there's a need for looping construct which is similar to
      __ata_port_for_each_link() but iterates over PMP links before the host
      link.  Instead of adding another one with long name, do the following
      cleanup.
      
      * Implement and export ata_link_next() and ata_dev_next() which take
        @mode parameter and can be used to build custom loop.
      * Implement ata_for_each_link() and ata_for_each_dev() which take
        looping mode explicitly.
      
      The following iteration modes are implemented.
      
      * ATA_LITER_EDGE		: loop over edge links
      * ATA_LITER_HOST_FIRST		: loop over all links, host link first
      * ATA_LITER_PMP_FIRST		: loop over all links, PMP links first
      
      * ATA_DITER_ENABLED		: loop over enabled devices
      * ATA_DITER_ENABLED_REVERSE	: loop over enabled devices in reverse order
      * ATA_DITER_ALL			: loop over all devices
      * ATA_DITER_ALL_REVERSE		: loop over all devices in reverse order
      
      This change removes exlicit device enabledness checks from many loops
      and makes it clear which ones are iterated over in which direction.
      Signed-off-by: 's avatarTejun Heo <tj@kernel.org>
      Signed-off-by: 's avatarJeff Garzik <jgarzik@redhat.com>
      1eca4365
  13. 28 Oct, 2008 1 commit
  14. 06 May, 2008 1 commit
    • Alan Cox's avatar
      pata_atiixp: Don't disable · 05177f17
      Alan Cox authored
      A couple of distributions (Fedora, Ubuntu) were having weird problems with the
      ATI IXP series PATA controllers being reported as simplex.  At the heart of
      the problem is that both distros ignored the recommendations to load pata_acpi
      and ata_generic *AFTER* specific host drivers.
      
      The underlying cause however is that if you D3 and then D0 an ATI IXP it
      helpfully throws away some configuration and won't let you rewrite it.
      
      Add checks to ata_generic and pata_acpi to pin ATIIXP devices.  Possibly the
      real answer here is to quirk them and pin them, but right now we can't do that
      before they've been pcim_enable()'d by a driver.
      
      I'm indebted to David Gero for this.  His bug report not only reported the
      problem but identified the cause correctly and he had tested the right values
      to prove what was going on
      
      [If you backport this for 2.6.24 you will need to pull in the 2.6.25
      removal of the bogus WARN_ON() in pcim_enagle]
      Signed-off-by: 's avatarAlan Cox <alan@redhat.com>
      Tested-by: 's avatarDavid Gero <davidg@havidave.com>
      Signed-off-by: 's avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: 's avatarJeff Garzik <jgarzik@redhat.com>
      05177f17
  15. 17 Apr, 2008 6 commits
    • Tejun Heo's avatar
      libata: rename SFF functions · 9363c382
      Tejun Heo authored
      SFF functions have confusing names.  Some have sff prefix, some have
      bmdma, some std, some pci and some none.  Unify the naming by...
      
      * SFF functions which are common to both BMDMA and non-BMDMA are
        prefixed with ata_sff_.
      
      * SFF functions which are specific to BMDMA are prefixed with
        ata_bmdma_.
      
      * SFF functions which are specific to PCI but apply to both BMDMA and
        non-BMDMA are prefixed with ata_pci_sff_.
      
      * SFF functions which are specific to PCI and BMDMA are prefixed with
        ata_pci_bmdma_.
      
      * Drop generic prefixes from LLD specific routines.  For example,
        bfin_std_dev_select -> bfin_dev_select.
      
      The following renames are noteworthy.
      
        ata_qc_issue_prot() -> ata_sff_qc_issue()
        ata_pci_default_filter() -> ata_bmdma_mode_filter()
        ata_dev_try_classify() -> ata_sff_dev_classify()
      
      This rename is in preparation of separating SFF support out of libata
      core layer.  This patch strictly renames functions and doesn't
      introduce any behavior difference.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      9363c382
    • Tejun Heo's avatar
      libata: stop overloading port_info->private_data · 887125e3
      Tejun Heo authored
      port_info->private_data is currently used for two purposes - to record
      private data about the port_info or to specify host->private_data to
      use when allocating ata_host.
      
      This overloading is confusing and counter-intuitive in that
      port_info->private_data becomes host->private_data instead of
      port->private_data.  In addition, port_info and host don't correspond
      to each other 1-to-1.  Currently, the first non-NULL
      port_info->private_data is used.
      
      This patch makes port_info->private_data just be what it is -
      private_data for the port_info where LLD can jot down extra info.
      libata no longer sets host->private_data to the first non-NULL
      port_info->private_data, @host_priv argument is added to
      ata_pci_init_one() instead.  LLDs which use ata_pci_init_one() can use
      this argument to pass in pointer to host private data.  LLDs which
      don't should use init-register model anyway and can initialize
      host->private_data directly.
      
      Adding @host_priv instead of using init-register model for LLDs which
      use ata_pci_init_one() is suggested by Alan Cox.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
      887125e3
    • Tejun Heo's avatar
      libata: make ata_pci_init_one() not use ops->irq_handler and pi->sht · 1bd5b715
      Tejun Heo authored
      ata_pci_init_one() is the only function which uses ops->irq_handler
      and pi->sht.  Other initialization functions take the same information
      as arguments.  This causes confusion and duplicate unused entries in
      structures.
      
      Make ata_pci_init_one() take sht as an argument and use ata_interrupt
      implicitly.  All current users use ata_interrupt and if different irq
      handler is necessary open coding ata_pci_init_one() using
      ata_prepare_sff_host() and ata_activate_sff_host can be done under ten
      lines including error handling and driver which requires custom
      interrupt handler is likely to require custom initialization anyway.
      
      As ata_pci_init_one() was the last user of ops->irq_handler, this
      patch also kills the field.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      1bd5b715
    • Tejun Heo's avatar
      libata: implement and use ops inheritance · 029cfd6b
      Tejun Heo authored
      libata lets low level drivers build ata_port_operations table and
      register it with libata core layer.  This allows low level drivers
      high level of flexibility but also burdens them with lots of
      boilerplate entries.
      
      This becomes worse for drivers which support related similar
      controllers which differ slightly.  They share most of the operations
      except for a few.  However, the driver still needs to list all
      operations for each variant.  This results in large number of
      duplicate entries, which is not only inefficient but also error-prone
      as it becomes very difficult to tell what the actual differences are.
      
      This duplicate boilerplates all over the low level drivers also make
      updating the core layer exteremely difficult and error-prone.  When
      compounded with multi-branched development model, it ends up
      accumulating inconsistencies over time.  Some of those inconsistencies
      cause immediate problems and fixed.  Others just remain there dormant
      making maintenance increasingly difficult.
      
      To rectify the problem, this patch implements ata_port_operations
      inheritance.  To allow LLDs to easily re-use their own ops tables
      overriding only specific methods, this patch implements poor man's
      class inheritance.  An ops table has ->inherits field which can be set
      to any ops table as long as it doesn't create a loop.  When the host
      is started, the inheritance chain is followed and any operation which
      isn't specified is taken from the nearest ancestor which has it
      specified.  This operation is called finalization and done only once
      per an ops table and the LLD doesn't have to do anything special about
      it other than making the ops table non-const such that libata can
      update it.
      
      libata provides four base ops tables lower drivers can inherit from -
      base, sata, pmp, sff and bmdma.  To avoid overriding these ops
      accidentaly, these ops are declared const and LLDs should always
      inherit these instead of using them directly.
      
      After finalization, all the ops table are identical before and after
      the patch except for setting .irq_handler to ata_interrupt in drivers
      which didn't use to.  The .irq_handler doesn't have any actual effect
      and the field will soon be removed by later patch.
      
      * sata_sx4 is still using old style EH and currently doesn't take
        advantage of ops inheritance.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      029cfd6b
    • Tejun Heo's avatar
      libata: implement and use SHT initializers · 68d1d07b
      Tejun Heo authored
      libata lets low level drivers build scsi_host_template and register it
      to the SCSI layer.  This allows low level drivers high level of
      flexibility but also burdens them with lots of boilerplate entries.
      
      This patch implements SHT initializers which can be used to initialize
      all the boilerplate entries in a sht.  Three variants of them are
      implemented - BASE, BMDMA and NCQ - for different types of drivers.
      Note that entries can be overriden by putting individual initializers
      after the helper macro.
      
      All sht tables are identical before and after this patch.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      68d1d07b
    • Tejun Heo's avatar
      libata: normalize port_info, port_operations and sht tables · 6bd99b4e
      Tejun Heo authored
      Over the time, port info, ops and sht structures developed quite a bit
      of inconsistencies.  This patch updates drivers.
      
      * Enable/disable_pm callbacks added to all ahci ops tables.
      
      * Every driver for SFF controllers now uses ata_sff_port_start()
        instead of ata_port_start() unless the driver has custom
        implementation.
      
      * Every driver for SFF controllers now uses ata_pci_default_filter()
        unless the driver has custom implementation.
      
      * Removed an odd port_info->sht initialization from ata_piix.c.
        Likely a merge byproduct.
      
      * A port which has ATA_FLAG_SATA set doesn't need to set cable_detect
        to ata_cable_sata().  Remove it from via and mv port ops.
      
      * Some drivers had unnecessary .max_sectors initialization which is
        ignored and was missing .slave_destroy callback.  Fixed.
      
      * Removed unnecessary sht initializations port_info's.
      
      * Removed onsolete scsi device suspend/resume callbacks from
        pata_bf54x.
      
      * No reason to set ata_pci_default_filter() and bmdma functions for
        PIO-only drivers.  Remove those callbacks and replace
        ata_bmdma_irq_clear with ata_noop_irq_clear.
      
      * pata_platform sets port_start to ata_dummy_ret0.  port_start can
        just be set to NULL.
      
      * sata_fsl supports NCQ but was missing qc_defer.  Fixed.
      
      * pata_rb600_cf implements dummy port_start.  Removed.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      6bd99b4e
  16. 23 Jan, 2008 3 commits
  17. 12 Oct, 2007 6 commits
    • Alan Cox's avatar
      libata: Switch most of the remaining SFF drivers to ata_sff_port_start · 81ad1837
      Alan Cox authored
      This avoids allocating DMA buffers if not needed but at the moment is
      mostly just a neatness item.
      Signed-off-by: 's avatarAlan Cox <alan@redhat.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      81ad1837
    • Jeff Garzik's avatar
      [libata] Remove ->port_disable() hook · ac8869d5
      Jeff Garzik authored
      It was always set to ata_port_disable().  Removed the hook, and replaced
      the very few ap->ops->port_disable() callsites with direct calls to
      ata_port_disable().
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      ac8869d5
    • Jeff Garzik's avatar
      [libata] Remove ->irq_ack() hook, and ata_dummy_irq_on() · 6d32d30f
      Jeff Garzik authored
      * ->irq_ack() is redundant to what the irq handler already
        performs... chk-status + irq-clear.  Furthermore, it is only
        called in one place, when screaming-irq-debugging is enabled,
        so we don't want to bother with a hook just for that.
      
      * ata_dummy_irq_on() is only ever used in drivers that have
        no callpath reaching ->irq_on().  Remove .irq_on hook from
        those drivers, and the now-unused ata_dummy_irq_on()
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      6d32d30f
    • Tejun Heo's avatar
      libata-link: linkify config/EH related functions · 0260731f
      Tejun Heo authored
      Make the following functions deal with ata_link instead of ata_port.
      
      * ata_set_mode()
      * ata_eh_autopsy() and related functions
      * ata_eh_report() and related functions
      * suspend/resume related functions
      * ata_eh_recover() and related functions
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      0260731f
    • Tejun Heo's avatar
      libata-link: implement and use link/device iterators · f58229f8
      Tejun Heo authored
      Multiple links and different number of devices per link should be
      considered to iterate over links and devices.  This patch implements
      and uses link and device iterators - ata_port_for_each_link() and
      ata_link_for_each_dev() - and ata_link_max_devices().
      
      This change makes a lot of functions iterate over only possible
      devices instead of from dev 0 to dev ATA_MAX_DEVICES.  All such
      changes have been examined and nothing should be broken.
      
      While at it, add a separating comment before device helpers to
      distinguish them better from link helpers and others.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      f58229f8
    • Tejun Heo's avatar
      libata-link: introduce ata_link · 9af5c9c9
      Tejun Heo authored
      Introduce ata_link.  It abstracts PHY and sits between ata_port and
      ata_device.  This new level of abstraction is necessary to support
      SATA Port Multiplier, which basically adds a bunch of links (PHYs) to
      a ATA host port.  Fields related to command execution, spd_limit and
      EH are per-link and thus moved to ata_link.
      
      This patch only defines the host link.  Multiple link handling will be
      added later.  Also, a lot of ap->link derefences are added but many of
      them will be removed as each part is converted to deal directly with
      ata_link instead of ata_port.
      
      This patch introduces no behavior change.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      Cc: James Bottomley <James.Bottomley@SteelEye.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      9af5c9c9
  18. 31 Aug, 2007 1 commit
  19. 09 Jul, 2007 2 commits
  20. 03 Jul, 2007 1 commit
  21. 22 May, 2007 1 commit
  22. 11 May, 2007 2 commits
    • Tejun Heo's avatar
      libata: clean up SFF init mess · 1626aeb8
      Tejun Heo authored
      The intention of using port_mask in SFF init helpers was to eventually
      support exoctic configurations such as combination of legacy and
      native port on the same controller.  This never became actually
      necessary and the related code always has been subtly broken one way
      or the other.  Now that new init model is in place, there is no reason
      to make common helpers capable of handling all corner cases.  Exotic
      cases can simply dealt within LLDs as necessary.
      
      This patch removes port_mask handling in SFF init helpers.  SFF init
      helpers don't take n_ports argument and interpret it into port_mask
      anymore.  All information is carried via port_info.  n_ports argument
      is dropped and always two ports are allocated.  LLD can tell SFF to
      skip certain port by marking it dummy.  Note that SFF code has been
      treating unuvailable ports this way for a long time until recent
      breakage fix from Linus and is consistent with how other drivers
      handle with unavailable ports.
      
      This fixes 1-port legacy host handling still broken after the recent
      native mode fix and simplifies SFF init logic.  The following changes
      are made...
      
      * ata_pci_init_native_host() and ata_init_legacy_host() both now try
        to initialized whatever they can and mark failed ports dummy.  They
        return 0 if any port is successfully initialized.
      
      * ata_pci_prepare_native_host() and ata_pci_init_one() now doesn't
        take n_ports argument.  All info should be specified via port_info
        array.  Always two ports are allocated.
      
      * ata_pci_init_bmdma() exported to be used by LLDs in exotic cases.
      
      * port_info handling in all LLDs are standardized - all port_info
        arrays are const stack variable named ppi.  Unless the second port
        is different from the first, its port_info is specified as NULL
        (tells libata that it's identical to the last non-NULL port_info).
      
      * pata_hpt37x/hpt3x2n: don't modify static variable directly.  Make an
        on-stack copy instead as ata_piix does.
      
      * pata_uli: It has 4 ports instead of 2.  Don't use
        ata_pci_prepare_native_host().  Allocate the host explicitly and use
        init helpers.  It's simple enough.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      1626aeb8
    • Tejun Heo's avatar
      libata: reimplement suspend/resume support using sdev->manage_start_stop · 9666f400
      Tejun Heo authored
      Reimplement suspend/resume support using sdev->manage_start_stop.
      
      * Device suspend/resume is now SCSI layer's responsibility and the
        code is simplified a lot.
      
      * DPM is dropped.  This also simplifies code a lot.  Suspend/resume
        status is port-wide now.
      
      * ata_scsi_device_suspend/resume() and ata_dev_ready() removed.
      
      * Resume now has to wait for disk to spin up before proceeding.  I
        couldn't find easy way out as libata is in EH waiting for the
        disk to be ready and sd is waiting for EH to complete to issue
        START_STOP.
      
      * sdev->manage_start_stop is set to 1 in ata_scsi_slave_config().
        This fixes spindown on shutdown and suspend-to-disk.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      9666f400
  23. 28 Apr, 2007 1 commit
  24. 02 Mar, 2007 1 commit
  25. 26 Feb, 2007 1 commit