1. 25 Jul, 2012 1 commit
    • Axel Lin's avatar
      ata: use module_pci_driver · 2fc75da0
      Axel Lin authored
      This patch converts the drivers in drivers/ata/* to use module_pci_driver()
      macro which makes the code smaller and a bit simpler.
      Signed-off-by: 's avatarAxel Lin <axel.lin@gmail.com>
      Cc: Alan Cox <alan@linux.intel.com>
      Cc: Jeff Garzik <jgarzik@pobox.com>
      Cc: Mikael Pettersson <mikpe@it.uu.se>
      Cc: Mark Lord <kernel@teksavvy.com>
      Cc: Jeremy Higdon <jeremy@sgi.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: 's avatarJeff Garzik <jgarzik@redhat.com>
      2fc75da0
  2. 23 Jul, 2011 1 commit
    • Joe Perches's avatar
      ata: Add and use ata_print_version_once · 06296a1e
      Joe Perches authored
      Use a single mechanism to show driver version.
      Reduces text a tiny bit too.
      
      Remove uses of static int printed_version
      Add and use ata_print_version(const struct device *, const char *ver)
      and ata_print_version_once.
      
      $ size drivers/ata/built-in.*
         text	   data	    bss	    dec	    hex	filename
       544969	  73893	 116584	 735446	  b38d6	drivers/ata/built-in.allyesconfig.ata.o
       543870	  73893	 116592	 734355	  b34ad	drivers/ata/built-in.allyesconfig.print_once.o
       141328	  14689	   4220	 160237	  271ed	drivers/ata/built-in.defconfig.ata.o
       141212	  14689	   4220	 160121	  27179	drivers/ata/built-in.defconfig.print_once.o
      Signed-off-by: 's avatarJoe Perches <joe@perches.com>
      Signed-off-by: 's avatarJeff Garzik <jgarzik@pobox.com>
      06296a1e
  3. 31 Mar, 2011 1 commit
  4. 25 Mar, 2009 1 commit
  5. 08 Jan, 2009 1 commit
  6. 28 Oct, 2008 1 commit
  7. 17 Apr, 2008 5 commits
    • Tejun Heo's avatar
      libata: rename SFF functions · 9363c382
      Tejun Heo authored
      SFF functions have confusing names.  Some have sff prefix, some have
      bmdma, some std, some pci and some none.  Unify the naming by...
      
      * SFF functions which are common to both BMDMA and non-BMDMA are
        prefixed with ata_sff_.
      
      * SFF functions which are specific to BMDMA are prefixed with
        ata_bmdma_.
      
      * SFF functions which are specific to PCI but apply to both BMDMA and
        non-BMDMA are prefixed with ata_pci_sff_.
      
      * SFF functions which are specific to PCI and BMDMA are prefixed with
        ata_pci_bmdma_.
      
      * Drop generic prefixes from LLD specific routines.  For example,
        bfin_std_dev_select -> bfin_dev_select.
      
      The following renames are noteworthy.
      
        ata_qc_issue_prot() -> ata_sff_qc_issue()
        ata_pci_default_filter() -> ata_bmdma_mode_filter()
        ata_dev_try_classify() -> ata_sff_dev_classify()
      
      This rename is in preparation of separating SFF support out of libata
      core layer.  This patch strictly renames functions and doesn't
      introduce any behavior difference.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      9363c382
    • Tejun Heo's avatar
      libata: make reset related methods proper port operations · a1efdaba
      Tejun Heo authored
      Currently reset methods are not specified directly in the
      ata_port_operations table.  If a LLD wants to use custom reset
      methods, it should construct and use a error_handler which uses those
      reset methods.  It's done this way for two reasons.
      
      First, the ops table already contained too many methods and adding
      four more of them would noticeably increase the amount of necessary
      boilerplate code all over low level drivers.
      
      Second, as ->error_handler uses those reset methods, it can get
      confusing.  ie. By overriding ->error_handler, those reset ops can be
      made useless making layering a bit hazy.
      
      Now that ops table uses inheritance, the first problem doesn't exist
      anymore.  The second isn't completely solved but is relieved by
      providing default values - most drivers can just override what it has
      implemented and don't have to concern itself about higher level
      callbacks.  In fact, there currently is no driver which actually
      modifies error handling behavior.  Drivers which override
      ->error_handler just wraps the standard error handler only to prepare
      the controller for EH.  I don't think making ops layering strict has
      any noticeable benefit.
      
      This patch makes ->prereset, ->softreset, ->hardreset, ->postreset and
      their PMP counterparts propoer ops.  Default ops are provided in the
      base ops tables and drivers are converted to override individual reset
      methods instead of creating custom error_handler.
      
      * ata_std_error_handler() doesn't use sata_std_hardreset() if SCRs
        aren't accessible.  sata_promise doesn't need to use separate
        error_handlers for PATA and SATA anymore.
      
      * softreset is broken for sata_inic162x and sata_sx4.  As libata now
        always prefers hardreset, this doesn't really matter but the ops are
        forced to NULL using ATA_OP_NULL for documentation purpose.
      
      * pata_hpt374 needs to use different prereset for the first and second
        PCI functions.  This used to be done by branching from
        hpt374_error_handler().  The proper way to do this is to use
        separate ops and port_info tables for each function.  Converted.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      a1efdaba
    • Tejun Heo's avatar
      libata: implement and use ops inheritance · 029cfd6b
      Tejun Heo authored
      libata lets low level drivers build ata_port_operations table and
      register it with libata core layer.  This allows low level drivers
      high level of flexibility but also burdens them with lots of
      boilerplate entries.
      
      This becomes worse for drivers which support related similar
      controllers which differ slightly.  They share most of the operations
      except for a few.  However, the driver still needs to list all
      operations for each variant.  This results in large number of
      duplicate entries, which is not only inefficient but also error-prone
      as it becomes very difficult to tell what the actual differences are.
      
      This duplicate boilerplates all over the low level drivers also make
      updating the core layer exteremely difficult and error-prone.  When
      compounded with multi-branched development model, it ends up
      accumulating inconsistencies over time.  Some of those inconsistencies
      cause immediate problems and fixed.  Others just remain there dormant
      making maintenance increasingly difficult.
      
      To rectify the problem, this patch implements ata_port_operations
      inheritance.  To allow LLDs to easily re-use their own ops tables
      overriding only specific methods, this patch implements poor man's
      class inheritance.  An ops table has ->inherits field which can be set
      to any ops table as long as it doesn't create a loop.  When the host
      is started, the inheritance chain is followed and any operation which
      isn't specified is taken from the nearest ancestor which has it
      specified.  This operation is called finalization and done only once
      per an ops table and the LLD doesn't have to do anything special about
      it other than making the ops table non-const such that libata can
      update it.
      
      libata provides four base ops tables lower drivers can inherit from -
      base, sata, pmp, sff and bmdma.  To avoid overriding these ops
      accidentaly, these ops are declared const and LLDs should always
      inherit these instead of using them directly.
      
      After finalization, all the ops table are identical before and after
      the patch except for setting .irq_handler to ata_interrupt in drivers
      which didn't use to.  The .irq_handler doesn't have any actual effect
      and the field will soon be removed by later patch.
      
      * sata_sx4 is still using old style EH and currently doesn't take
        advantage of ops inheritance.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      029cfd6b
    • Tejun Heo's avatar
      libata: implement and use SHT initializers · 68d1d07b
      Tejun Heo authored
      libata lets low level drivers build scsi_host_template and register it
      to the SCSI layer.  This allows low level drivers high level of
      flexibility but also burdens them with lots of boilerplate entries.
      
      This patch implements SHT initializers which can be used to initialize
      all the boilerplate entries in a sht.  Three variants of them are
      implemented - BASE, BMDMA and NCQ - for different types of drivers.
      Note that entries can be overriden by putting individual initializers
      after the helper macro.
      
      All sht tables are identical before and after this patch.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      68d1d07b
    • Tejun Heo's avatar
      libata: implement and use ata_noop_irq_clear() · 358f9a77
      Tejun Heo authored
      ->irq_clear() is used to clear IRQ bit of a SFF controller and isn't
      useful for drivers which don't use libata SFF HSM implementation.
      However, it's a required callback and many drivers implement their own
      noop version as placeholder.  This patch implements ata_noop_irq_clear
      and use it to replace those custom placeholders.
      
      Also, SFF drivers which don't support BMDMA don't need to use
      ata_bmdma_irq_clear().  It becomes noop if BMDMA address isn't
      initialized.  Convert them to use ata_noop_irq_clear().
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      358f9a77
  8. 19 Oct, 2007 1 commit
  9. 12 Oct, 2007 5 commits
    • Tejun Heo's avatar
      libata: implement and use ata_port_desc() to report port configuration · cbcdd875
      Tejun Heo authored
      Currently, port configuration reporting has the following problems.
      
      * iomapped address is reported instead of raw address
      * report contains irrelevant fields or lacks necessary fields for
        non-SFF controllers.
      * host->irq/irq2 are there just for reporting and hacky.
      
      This patch implements and uses ata_port_desc() and
      ata_port_pbar_desc().  ata_port_desc() is almost identical to
      ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no
      locking requirement, can only be used during host initialization and "
      " is used as separator instead of ", ".  ata_port_pbar_desc() is a
      helper to ease reporting of a PCI BAR or an offsetted address into it.
      
      LLD pushes whatever description it wants using the above two
      functions.  The accumulated description is printed on host
      registration after "[S/P]ATA max MAX_XFERMODE ".
      
      SFF init helpers and ata_host_activate() automatically add
      descriptions for addresses and irq respectively, so only LLDs which
      isn't standard SFF need to add custom descriptions.  In many cases,
      such controllers need to report different things anyway.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      cbcdd875
    • Alan Cox's avatar
      libata: Switch most of the remaining SFF drivers to ata_sff_port_start · 81ad1837
      Alan Cox authored
      This avoids allocating DMA buffers if not needed but at the moment is
      mostly just a neatness item.
      Signed-off-by: 's avatarAlan Cox <alan@redhat.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      81ad1837
    • Jeff Garzik's avatar
      [libata] Remove ->port_disable() hook · ac8869d5
      Jeff Garzik authored
      It was always set to ata_port_disable().  Removed the hook, and replaced
      the very few ap->ops->port_disable() callsites with direct calls to
      ata_port_disable().
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      ac8869d5
    • Jeff Garzik's avatar
      [libata] Remove ->irq_ack() hook, and ata_dummy_irq_on() · 6d32d30f
      Jeff Garzik authored
      * ->irq_ack() is redundant to what the irq handler already
        performs... chk-status + irq-clear.  Furthermore, it is only
        called in one place, when screaming-irq-debugging is enabled,
        so we don't want to bother with a hook just for that.
      
      * ata_dummy_irq_on() is only ever used in drivers that have
        no callpath reaching ->irq_on().  Remove .irq_on hook from
        those drivers, and the now-unused ata_dummy_irq_on()
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      6d32d30f
    • Tejun Heo's avatar
      libata-link: linkify reset · cc0680a5
      Tejun Heo authored
      Make reset methods and related functions deal with ata_link instead of
      ata_port.
      
      * ata_do_reset()
      * ata_eh_reset()
      * all prereset/reset/postreset methods and related functions
      
      This patch introduces no behavior change.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      cc0680a5
  10. 11 May, 2007 1 commit
    • Tejun Heo's avatar
      libata: reimplement suspend/resume support using sdev->manage_start_stop · 9666f400
      Tejun Heo authored
      Reimplement suspend/resume support using sdev->manage_start_stop.
      
      * Device suspend/resume is now SCSI layer's responsibility and the
        code is simplified a lot.
      
      * DPM is dropped.  This also simplifies code a lot.  Suspend/resume
        status is port-wide now.
      
      * ata_scsi_device_suspend/resume() and ata_dev_ready() removed.
      
      * Resume now has to wait for disk to spin up before proceeding.  I
        couldn't find easy way out as libata is in EH waiting for the
        disk to be ready and sd is waiting for EH to complete to issue
        START_STOP.
      
      * sdev->manage_start_stop is set to 1 in ata_scsi_slave_config().
        This fixes spindown on shutdown and suspend-to-disk.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      9666f400
  11. 01 May, 2007 1 commit
    • Tejun Heo's avatar
      libata: add deadline support to prereset and reset methods · d4b2bab4
      Tejun Heo authored
      Add @deadline to prereset and reset methods and make them honor it.
      ata_wait_ready() which directly takes @deadline is implemented to be
      used as the wait function.  This patch is in preparation for EH timing
      improvements.
      
      * ata_wait_ready() never does busy sleep.  It's only used from EH and
        no wait in EH is that urgent.  This function also prints 'be
        patient' message automatically after 5 secs of waiting if more than
        3 secs is remaining till deadline.
      
      * ata_bus_post_reset() now fails with error code if any of its wait
        fails.  This is important because earlier reset tries will have
        shorter timeout than the spec requires.  If a device fails to
        respond before the short timeout, reset should be retried with
        longer timeout rather than silently ignoring the device.
      
        There are three behavior differences.
      
        1. Timeout is applied to both devices at once, not separately.  This
           is more consistent with what the spec says.
      
        2. When a device passes devchk but fails to become ready before
           deadline.  Previouly, post_reset would just succeed and let
           device classification remove the device.  New code fails the
           reset thus causing reset retry.  After a few times, EH will give
           up disabling the port.
      
        3. When slave device passes devchk but fails to become accessible
           (TF-wise) after reset.  Original code disables dev1 after 30s
           timeout and continues as if the device doesn't exist, while the
           patched code fails reset.  When this happens, new code fails
           reset on whole port rather than proceeding with only the primary
           device.
      
        If the failing device is suffering transient problems, new code
        retries reset which is a better behavior.  If the failing device is
        actually broken, the net effect is identical to it, but not to the
        other device sharing the channel.  In the previous code, reset would
        have succeeded after 30s thus detecting the working one.  In the new
        code, reset fails and whole port gets disabled.  IMO, it's a
        pathological case anyway (broken device sharing bus with working
        one) and doesn't really matter.
      
      * ata_bus_softreset() is changed to return error code from
        ata_bus_post_reset().  It used to return 0 unconditionally.
      
      * Spin up waiting is to be removed and not converted to honor
        deadline.
      
      * To be on the safe side, deadline is set to 40s for the time being.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      d4b2bab4
  12. 28 Apr, 2007 2 commits
  13. 02 Mar, 2007 1 commit
  14. 14 Feb, 2007 1 commit
  15. 09 Feb, 2007 5 commits
    • Sergei Shtylyov's avatar
      (2.6.20) pata_mpiix: probing cleanup (resend) · 92ae7849
      Sergei Shtylyov authored
      MPIIX has only single channel IDE which can be configured for either primary or
      secondary legacy I/O ports and IRQ.  So, get rid of the unneeded second probe
      entry in mpiix_init_one() and of the invalid (but unused anyway) enable bits in
      mpiix_pre_reset().
      
      Warning: this cleanup has only been compile-tested...
      Signed-off-by: 's avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      92ae7849
    • Sergei Shtylyov's avatar
      (2.6.20) pata_mpiix: fix PIO setup issues · 7b4f1a13
      Sergei Shtylyov authored
      Fix clearing/setting the wrong TIME/IE/PPE bits for a slave drive caused by a
      wrong shift count.
      Fix the PIO mode 1 being overclocked by wrongly selecting the fast timing bank.
      Also, fix/rephrase some comments while at it.
      Signed-off-by: 's avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      7b4f1a13
    • Akira Iguchi's avatar
      libata: add another IRQ calls (libata drivers) · 246ce3b6
      Akira Iguchi authored
      This patch is against each libata driver.
      
      Two IRQ calls are added in ata_port_operations.
      - irq_on() is used to enable interrupts.
      - irq_ack() is used to acknowledge a device interrupt.
      
      In most drivers, ata_irq_on() and ata_irq_ack() are used for
      irq_on and irq_ack respectively.
      
      In some drivers (ex: ahci, sata_sil24) which cannot use them
      as is, ata_dummy_irq_on() and ata_dummy_irq_ack() are used.
      Signed-off-by: 's avatarKou Ishizaki <kou.ishizaki@toshiba.co.jp>
      Signed-off-by: 's avatarAkira Iguchi <akira2.iguchi@toshiba.co.jp>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      246ce3b6
    • Tejun Heo's avatar
      libata: convert to iomap · 0d5ff566
      Tejun Heo authored
      Convert libata core layer and LLDs to use iomap.
      
      * managed iomap is used.  Pointer to pcim_iomap_table() is cached at
        host->iomap and used through out LLDs.  This basically replaces
        host->mmio_base.
      
      * if possible, pcim_iomap_regions() is used
      
      Most iomap operation conversions are taken from Jeff Garzik
      <jgarzik@pobox.com>'s iomap branch.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      0d5ff566
    • Tejun Heo's avatar
      libata: update libata LLDs to use devres · 24dc5f33
      Tejun Heo authored
      Update libata LLDs to use devres.  Core layer is already converted to
      support managed LLDs.  This patch simplifies initialization and fixes
      many resource related bugs in init failure and detach path.  For
      example, all converted drivers now handle ata_device_add() failure
      gracefully without excessive resource rollback code.
      
      As most resources are released automatically on driver detach, many
      drivers don't need or can do with much simpler ->{port|host}_stop().
      In general, stop callbacks are need iff port or host needs to be given
      commands to shut it down.  Note that freezing is enough in many cases
      and ports are automatically frozen before being detached.
      Signed-off-by: 's avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: 's avatarJeff Garzik <jeff@garzik.org>
      24dc5f33
  16. 03 Dec, 2006 1 commit
  17. 02 Dec, 2006 1 commit
  18. 29 Nov, 2006 1 commit
  19. 29 Sep, 2006 1 commit
  20. 26 Sep, 2006 1 commit
  21. 29 Aug, 2006 1 commit