test_case_list.xml

 <testCaseList>

<MachineList>mozart calisson stevens nano amerique</MachineList>
 <NFSResultsShare>/mnt/sradio/TEST_RESULTS/</NFSResultsShare>
 <GitOAI5GRepo>https://gitlab.eurecom.fr/oai/openairinterface5g.git</GitOAI5GRepo>
 <GitOpenair-cnRepo>https://gitlab.eurecom.fr/oai/openair-cn.git</GitOpenair-cnRepo>
 <GitOAI5GRepoBranch>develop</GitOAI5GRepoBranch>
 <GitOpenair-cnRepoBranch>develop</GitOpenair-cnRepoBranch>
 <CleanUpOldProgs>oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* hss hss_sim configure_cots_bandrich_ue* wvdial*  iperf iperf_script ping tshark</CleanUpOldProgs>	
 <CleanUpAluLteBox>sudo -S -E /opt/ltebox/tools/stop_ltebox</CleanUpAluLteBox>
<ExmimoRfStop>$OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; dmesg|tail</ExmimoRfStop>
 <Timeout_execution>36000</Timeout_execution>
 <TestCaseExclusionList>0104+ 015502 015505  015506 015507 015508 015508 015509 015510 015511 015602 015605 015702 015705 016102 016105</TestCaseExclusionList>
 <nruns_lte-softmodem>3</nruns_lte-softmodem>
 <MachineListGeneric>mozart calisson stevens nano amerique</MachineListGeneric>
     <testCase id="010101" >
     <class>compilation</class>
     <desc>Build oaisim.Rel8</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--oaisim -r Rel8  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/oaisim_build_oai/build/oaisim
                       $OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/nvram</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>oaisim.Rel8</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010102" >
     <class>compilation</class>
     <desc>Build oaisim.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--oaisim -r Rel10  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/oaisim_build_oai/build/oaisim
                       $OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/nvram</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>oaisim.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010103" >
     <class>compilation</class>
     <desc>Build oaisim_noS1.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--oaisim -r Rel10 --noS1  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
                       $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/oai_nw_drv/oai_nw_drv.ko</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>oaisim_noS1.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010110" >
     <class>compilation</class>
     <desc>Build lte_softmodem_noS1.USRP.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w USRP -r Rel10 --noS1  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem_noS1.USRP.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010111" >
     <class>compilation</class>
     <desc>Build lte_softmodem_noS1.EXMIMO.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w EXMIMO -r Rel10 --noS1  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/updatefw
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/oarf_config_exmimo.oct</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem_noS1.EXMIMO.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010112" >
     <class>compilation</class>
     <desc>Build lte_softmodem_noS1.BLADERF.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w BLADERF -r Rel10 --noS1  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem_noS1.BLADERF.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010113" >
     <class>compilation</class>
     <desc>Build lte_softmodem_noS1.ETHERNET.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w ETHERNET -r Rel10 --noS1  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem_noS1.ETHERNET.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 



     <testCase id="010120" >
     <class>compilation</class>
     <desc>Build lte_softmodem.USRP.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w USRP -r Rel10   -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem.USRP.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010121" >
     <class>compilation</class>
     <desc>Build lte_softmodem.EXMIMO.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w EXMIMO -r Rel10   -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/updatefw
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/oarf_config_exmimo.oct</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem.EXMIMO.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010122" >
     <class>compilation</class>
     <desc>Build lte_softmodem.BLADERF.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w BLADERF -r Rel10   -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem.BLADERF.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010123" >
     <class>compilation</class>
     <desc>Build lte_softmodem.ETHERNET.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w ETHERNET -r Rel10   -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem.ETHERNET.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010130" >
     <class>compilation</class>
     <desc>Build phy unitary simulators + secuirity unitary tests</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--phy_simulators --core_simulators  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/pucchsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/prachsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/pdcchsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/pbchsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/mbmssim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_kenb
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_encrypt
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_decrypt
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea2
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea1
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia2</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>unitary-sim.Rel10</tags>
     <nruns>1</nruns>
     </testCase>


     <testCase id="010140" >
     <class>compilation</class>
     <desc>Build RRH Gateway</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--RRH -w USRP  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRH.USRP.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010141" >
     <class>compilation</class>
     <desc>Build RRH Gateway</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--RRH -w EXMIMO  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/CMakeFiles/openair_rf/openair_rf.ko
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/updatefw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/oarf_config_exmimo.oct</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRH.EXMIMO.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010142" >
     <class>compilation</class>
     <desc>Build RRH Gateway</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--RRH -w BLADERF  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</compile_prog_out>
     <pre_exec></pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRH.BLADERF.Rel10</tags>
     <nruns>1</nruns>
     </testCase>


   <testCase id="010200">
      <class>execution</class>
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50  -x 2
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100  -x 2 </main_exec_args>
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2</tags>
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010201">
      <class>execution</class>
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -a 
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -a 
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -a 
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50  -x 2 -a 
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100  -x 2 -a </main_exec_args>
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2</tags>
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010202">
      <class>execution</class>
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50  -x 2
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100  -x 2</main_exec_args>
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 </tags>
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010203">
      <class>execution</class>
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -a 
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50  -x 2 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100  -x 2 -a</main_exec_args>
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2  oaisim_nos1.tdd.20MHz.TM2</tags>
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010204">
      <class>execution</class>
      <desc>Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -c26 
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -c26 
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -c26 
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -c26 
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50  -x 2 -c26 
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100  -x 2 -c26</main_exec_args>
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 </tags>
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010205">
      <class>execution</class>
      <desc>Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check that there is no packet losses</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -c26 -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -c26  -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -c26 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -c26  -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50  -x 2 -c26 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100  -x 2 -c26  -a</main_exec_args>
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 </tags>
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010300">
      <class>execution</class>
      <desc>Run OAISIM Rel10 FDD, 1 eNB + 1 UE 1 eNB (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -F
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50  -x 2 -F
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100  -x 2 -F</main_exec_args>
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags>
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010301">
      <class>execution</class>
      <desc>Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -F -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50  -x 2 -F -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100  -x 2 -F -a</main_exec_args>
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags> 
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010302">
      <class>execution</class>
      <desc> Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -F
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -F
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -F
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -F
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50  -x 2 -F
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100  -x 2 -F </main_exec_args>
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 </tags> 
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010303">
      <class>execution</class>
      <desc>Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -F -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 1 -F -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -F -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -F -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50  -x 2 -F -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100  -x 2 -F -a</main_exec_args>
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags>
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010304">
      <class>execution</class>
      <desc>Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) without PHY_ABSTRACTION mode, ping from from eNB to UE, and for check for no packet losses</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -c26
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -F -c26
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F -c26
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F -c26
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50  -x 2 -F -c26
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100  -x 2 -F -c26</main_exec_args>
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags>
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010305">
      <class>execution</class>
      <desc>Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check for no packet losses</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -c26 -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 1 -F -c26 -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F -c26 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F -c26 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50  -x 2 -F -c26 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100  -x 2 -F -c26 -a</main_exec_args>
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 </tags>
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010400">
      <class>execution</class>
      <desc>Check if eMBMS procedure is not finished completely, make sure that the SIB13/MCCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -x 1 -Q3 -n 100 -b1 -u1</main_exec_args>
      <search_expr_true>"Found MBSFNAreaConfiguration from eNB 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>oaisim_noS1.eMBMS</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010401">
      <class>execution</class>
      <desc>Check if eMBMS multicast/broadcast data is received, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -x 1 -T mscbr -Q3 -n 100 -b1 -u1</main_exec_args>
      <search_expr_true>"Received a multicast packet"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>oaisim_noS1.eMBMS</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010402">
      <class>execution</class>
      <desc>Check for eMBMS multicast/broadcast data received in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -F -T mscbr -x 1 -Q3 -n 100 -b1 -u1</main_exec_args>
      <search_expr_true>"Received a multicast packet"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>oaisim_noS1.eMBMS</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010403">
      <class>execution</class>
      <desc>Check for eMBMS multicast/broadcast DF relaying working properly in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
      <pre_exec>$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -c43 -F -T mbvbr -Q4 -j1 -n120</main_exec_args>
      <search_expr_true>"MTCH for sync area 1"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>oaisim_noS1.eMBMS</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015000">
      <class>execution</class>
      <desc>test_aes128_cmac_encrypt</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec></pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_aes128_cmac_encrypt</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015001">
      <class>execution</class>
      <desc>test_aes128_ctr_decrypt</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec></pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_decrypt</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_aes128_ctr_decrypt</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015002">
      <class>execution</class>
      <desc>test_aes128_ctr_encrypt</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec></pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_encrypt</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_aes128_ctr_encrypt</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015003">
      <class>execution</class>
      <desc>test_secu_kenb</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec></pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_kenb</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_secu_kenb</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015004">
      <class>execution</class>
      <desc>test_secu_knas</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec></pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_secu_knas</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015005">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eea1</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec></pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea1</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_secu_knas_encrypt_eea1</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015006">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eea2</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec></pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea2</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_secu_knas_encrypt_eea2</tags>
      <nruns>3</nruns>
    </testCase>

   <testCase id="015007">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eia1</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec></pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_secu_knas_encrypt_eia1</tags>
      <nruns>3</nruns>
    </testCase>

   <testCase id="015008">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eia2</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec></pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_secu_knas_encrypt_eia2</tags>
      <nruns>3</nruns>
    </testCase>

   <testCase id="015009">
      <class>execution</class>
      <desc>test_kdf</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
      <pre_exec></pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf</main_exec>
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <tags>test_kdf</tags>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015100">
      <class>execution</class>
      <desc>dlsim test cases (Test 1: 10 MHz, R2.FDD (MCS 5), EVA5, -1dB), 
      (Test 5: 1.4 MHz, R4.FDD (MCS 4), EVA5, 0dB (70%)),
      (Test 6, 10 MHz, R3.FDD (MCS 15), EVA5, 6.7dB (70%)),
      (Test 6b, 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (70%)),
      (Test 7, 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (30%)),
      (Test 7b, 5 MHz, R3-1.FDD (MCS 15), ETU70, 1.4 dB (30%)),
      (Test 10, 5 MHz, R6.FDD (MCS 25), EVA5, 17.4 dB (70%)),
      (Test 10b, 5 MHz, R6-1.FDD (MCS 24,18 PRB), EVA5, 17.5dB (70%)),
      (Test 11, 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%))
      (TM2 Test 1 10 MHz, R.11 FDD (MCS 14), EVA5, 6.8 dB (70%)),
      (TM2 Test 1b 20 MHz, R.11-2 FDD (MCS 13), EVA5, 5.9 dB (70%)),
       </desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --phy_simulators  -c </compile_prog_args>
      <pre_exec></pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim</main_exec>
      <main_exec_args> -m5 -gF -s-1 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L
                       -m4 -gF -s0 -w1.0 -f.2 -n500 -B6 -c4 -z2 -O70
                       -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L
                       -m14 -gF -s6.7 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70 -L
                       -m15 -gG -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O30 -L
                       -m14 -gG -s1.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O30 -L
                       -m25 -gF -s17.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70 -L
                       -m25 -gF -s17.5 -w1.0 -f.2 -n500 -B25 -c3 -z2 -r1022 -O70 -L
                       -m26 -gF -s17.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L
		       -m14 -gF -s6.8  -w1.0 -f.2 -n500 -B50 -c2 -x2 -y2 -z2 -O70 -L
                       -m13 -gF -s5.9  -w1.0 -f.2 -n500 -B25 -c3 -x2 -y2 -z2 -O70 -L</main_exec_args>
      <tags>dlsim.test1 dlsim.test5 dlsim.test6 dlsim.test6b dlsim.test7 dlsim.test7b dlsim.test10 dlsim.test10b dlsim.test11 dlsim.TM2_test1 dlsim.TM2_test1b</tags>
      <search_expr_true>"passed"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="015101">
      <class>execution</class>
      <desc>ulsim Test cases. (Test 1, 5 MHz, FDD (MCS 5), AWGN, 6dB), 
             (Test 2, 5 MHz, FDD (MCS 16), AWGN , 12dB (70%)),
             (Test 3, 10 MHz, R3.FDD (MCS 5), AWGN, 6dB (70%)),
             (Test 4, 10 MHz, R3-1.FDD (MCS 16), AWGN, 12dB (70%)),
             (Test 5, 20 MHz, FDD (MCS 5), AWGN, 6dB (70%)),
             (Test 6, 20 MHz, FDD (MCS 16), AWGN, 12 dB (70%))</desc>
      <pre_compile_prog></pre_compile_prog>
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
      <compile_prog_args> --phy_simulators  -c </compile_prog_args>
      <pre_exec></pre_exec>
      <pre_exec_args></pre_exec_args>
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim</main_exec>
      <main_exec_args> -B25 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L
                       -B25 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L
                        -B50 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L 
                       -B50 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L
                        -B100 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L
                       -B100 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L</main_exec_args>
     <tags>ulsim.test1 ulsim.test2 ulsim.test3 ulsim.test4 ulsim.test5 ulsim.test6</tags>
      <search_expr_true>"passed"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

  <testCase id="015500" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec></eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  -W </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  tracking_area_code \"4\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  mobile_country_code \"5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  mobile_network_code \"6\"</UE_config_file>
    <UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
    <UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
    <UE_pre_exec></UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.local.enb.conf.in  MCC \"208\"
                     BUILD/EPC/epc.local.enb.conf.in  MNC \"92\"
                     BUILD/EPC/epc.local.enb.conf.in   TAC \"1\"
                     BUILD/EPC/epc.local.enb.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
                     BUILD/EPC/epc.local.enb.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file>
    <EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l </HSS_compile_prog_args>

    <EPC_pre_exec></EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 


  <testCase id="015501" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec></eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  -W </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  tracking_area_code \"4\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  mobile_country_code \"5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  mobile_network_code \"6\"</UE_config_file>
    <UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
    <UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
    <UE_pre_exec></UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>True</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.local.enb.conf.in  MCC \"208\"
                     BUILD/EPC/epc.local.enb.conf.in  MNC \"92\"
                     BUILD/EPC/epc.local.enb.conf.in   TAC \"1\"
                     BUILD/EPC/epc.local.enb.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
                     BUILD/EPC/epc.local.enb.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file>
    <EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l </HSS_compile_prog_args>

    <EPC_pre_exec></EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
    <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
    <EPC_search_expr_false></EPC_search_expr_false>
    <EPC_terminate_missing_procs>True</EPC_terminate_missing_procs>
    <tags>USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
    <nruns>10</nruns>
    </testCase> 

  <testCase id="015502" >
    <class>lte-softmodem</class>
    <desc></desc>
    <eNB>calisson</eNB>
    <UE>stevens</UE>
    <EPC>amerique</EPC>
    <TimeOut_cmd>390</TimeOut_cmd>
    <eNB_working_dir>/tmp</eNB_working_dir>
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  nb_antennas_tx 1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.82/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
    <eNB_pre_exec></eNB_pre_exec>
    <eNB_pre_exec_args></eNB_pre_exec_args>
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf  -W </eNB_main_exec_args>
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
    <eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>

    <UE_working_dir>/tmp</UE_working_dir>
    <UE_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  tracking_area_code \"4\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  mobile_country_code \"5\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf  mobile_network_code \"6\"</UE_config_file>
    <UE_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</UE_compile_prog>
    <UE_compile_prog_args>--eNB -w USRP -x -c </UE_compile_prog_args>
    <UE_pre_exec></UE_pre_exec>
    <UE_pre_exec_args></UE_pre_exec_args>
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
    <UE_main_exec_args></UE_main_exec_args>
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
    <UE_terminate_missing_procs>True</UE_terminate_missing_procs>
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>

    <EPC_working_dir>/tmp</EPC_working_dir>
    <EPC_config_file>BUILD/EPC/epc.local.enb.conf.in  MCC \"208\"
                     BUILD/EPC/epc.local.enb.conf.in  MNC \"92\"
                     BUILD/EPC/epc.local.enb.conf.in   TAC \"1\"
                     BUILD/EPC/epc.local.enb.conf.in   PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
                     BUILD/EPC/epc.local.enb.conf.in   PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" </EPC_config_file>
    <EPC_compile_prog>SCRIPTS/build_epc</EPC_compile_prog>
    <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
    <HSS_compile_prog>SCRIPTS/build_hss</HSS_compile_prog>
    <HSS_compile_prog_args> -c -l </HSS_compile_prog_args>

    <EPC_pre_exec></EPC_pre_exec>
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
    <EPC_traffic_exec_args></EPC_traffic_exec_args>