usrp_lib.cpp 26 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
/*******************************************************************************
    OpenAirInterface 
    Copyright(c) 1999 - 2014 Eurecom

    OpenAirInterface is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.


    OpenAirInterface is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with OpenAirInterface.The full GNU General Public License is 
    included in this distribution in the file called "COPYING". If not, 
    see <http://www.gnu.org/licenses/>.

   Contact Information
   OpenAirInterface Admin: openair_admin@eurecom.fr
   OpenAirInterface Tech : openair_tech@eurecom.fr
24
   OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
25
  
ghaddab's avatar
ghaddab committed
26
   Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
27 28

 *******************************************************************************/
knopp's avatar
 
knopp committed
29 30 31

/** usrp_lib.cpp
 *
32
 * \author: HongliangXU : hong-liang-xu@agilent.com
knopp's avatar
 
knopp committed
33 34 35 36 37 38 39 40
 */

#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
#include <uhd/utils/thread_priority.hpp>
#include <uhd/usrp/multi_usrp.hpp>
41
#include <uhd/version.hpp>
knopp's avatar
 
knopp committed
42 43 44 45 46 47
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
48

knopp's avatar
 
knopp committed
49
#include "common_lib.h"
50 51 52 53 54 55 56
#ifdef __SSE4_1__
#  include <smmintrin.h>
#endif
 
#ifdef __AVX2__
#  include <immintrin.h>
#endif
57

58 59 60 61
#ifdef __arm__
#  include <arm_neon.h>
#endif

62 63 64 65 66
/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */

/*! \brief USRP Configuration */ 
knopp's avatar
 
knopp committed
67 68 69 70 71 72
typedef struct
{

  // --------------------------------
  // variables for USRP configuration
  // --------------------------------
73
  //! USRP device pointer
knopp's avatar
 
knopp committed
74 75
  uhd::usrp::multi_usrp::sptr usrp;
  //uhd::usrp::multi_usrp::sptr rx_usrp;
76
  
knopp's avatar
 
knopp committed
77
  //create a send streamer and a receive streamer
78
  //! USRP TX Stream
knopp's avatar
 
knopp committed
79
  uhd::tx_streamer::sptr tx_stream;
80
  //! USRP RX Stream
knopp's avatar
 
knopp committed
81 82
  uhd::rx_streamer::sptr rx_stream;

83
  //! USRP TX Metadata
knopp's avatar
 
knopp committed
84
  uhd::tx_metadata_t tx_md;
85
  //! USRP RX Metadata
knopp's avatar
 
knopp committed
86 87
  uhd::rx_metadata_t rx_md;

88
  //! USRP Timestamp Information
knopp's avatar
 
knopp committed
89
  uhd::time_spec_t tm_spec;
90

knopp's avatar
 
knopp committed
91
  //setup variables and allocate buffer
92
  //! USRP Metadata
knopp's avatar
 
knopp committed
93 94
  uhd::async_metadata_t async_md;

95
  //! Sampling rate
knopp's avatar
 
knopp committed
96
  double sample_rate;
97 98

  //! time offset between transmiter timestamp and receiver timestamp;
knopp's avatar
 
knopp committed
99
  double tdiff;
100 101

  //! TX forward samples. We use usrp_time_offset to get this value
knopp's avatar
 
knopp committed
102 103 104 105 106 107
  int tx_forward_nsamps; //166 for 20Mhz


  // --------------------------------
  // Debug and output control
  // --------------------------------
108
  //! Number of underflows
knopp's avatar
 
knopp committed
109
  int num_underflows;
110
  //! Number of overflows
knopp's avatar
 
knopp committed
111
  int num_overflows;
112 113
  
  //! Number of sequential errors
knopp's avatar
 
knopp committed
114
  int num_seq_errors;
115
  //! tx count
knopp's avatar
 
knopp committed
116
  int64_t tx_count;
117
  //! rx count
knopp's avatar
 
knopp committed
118
  int64_t rx_count;
119
  //! timestamp of RX packet
knopp's avatar
 
knopp committed
120 121 122 123
  openair0_timestamp rx_timestamp;

} usrp_state_t;

124 125 126
/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
knopp's avatar
 
knopp committed
127 128 129 130 131 132
static int trx_usrp_start(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  // init recv and send streaming
  uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
knopp's avatar
 
knopp committed
133
  cmd.time_spec = s->usrp->get_time_now() + uhd::time_spec_t(0.05);
knopp's avatar
 
knopp committed
134 135 136
  cmd.stream_now = false; // start at constant delay
  s->rx_stream->issue_stream_cmd(cmd);

knopp's avatar
 
knopp committed
137
  s->tx_md.time_spec = cmd.time_spec + uhd::time_spec_t(1-(double)s->tx_forward_nsamps/s->sample_rate);
knopp's avatar
 
knopp committed
138 139 140 141 142 143 144 145
  s->tx_md.has_time_spec = true;
  s->tx_md.start_of_burst = true;
  s->tx_md.end_of_burst = false;


  s->rx_count = 0;
  s->tx_count = 0;
  s->rx_timestamp = 0;
146 147

  return 0;
knopp's avatar
 
knopp committed
148
}
149 150 151
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources 
 * \param device the hardware to use
 */
knopp's avatar
 
knopp committed
152 153 154 155 156 157
static void trx_usrp_end(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->rx_stream->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);

navid's avatar
navid committed
158 159 160 161 162
  //send a mini EOB packet
  s->tx_md.end_of_burst = true;
  s->tx_stream->send("", 0, s->tx_md);
  s->tx_md.end_of_burst = false;
  
knopp's avatar
 
knopp committed
163
}
164

165 166 167 168 169 170 171 172
/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
      @param timestamp The timestamp at whicch the first sample MUST be sent 
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
      @param antenna_id index of the antenna if the device has multiple anteannas
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
*/ 
173
static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags)
knopp's avatar
 
knopp committed
174 175 176 177 178 179 180
{
  usrp_state_t *s = (usrp_state_t*)device->priv;
  s->tx_md.time_spec = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
  if(flags)
    s->tx_md.has_time_spec = true;
  else
    s->tx_md.has_time_spec = false;
knopp's avatar
knopp committed
181 182 183 184 185 186 187 188

  if (cc>1) {
    std::vector<void *> buff_ptrs;
    for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
    s->tx_stream->send(buff_ptrs, nsamps, s->tx_md);
  }
  else
    s->tx_stream->send(buff[0], nsamps, s->tx_md);
knopp's avatar
 
knopp committed
189
  s->tx_md.start_of_burst = false;
190 191

  return 0;
knopp's avatar
 
knopp committed
192 193
}

194 195 196 197 198 199 200 201 202 203 204
/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
knopp's avatar
 
knopp committed
205
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc)
knopp's avatar
 
knopp committed
206
{
207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222
   usrp_state_t *s = (usrp_state_t*)device->priv;
   int samples_received=0,i,j;
   int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
   __m256i buff_tmp[2][nsamps>>3];
   nsamps2 = (nsamps+7)>>3;
#else
   __m128i buff_tmp[2][nsamps>>2];
   nsamps2 = (nsamps+3)>>2;
#endif
#elif defined(__arm__)
   int16x8_t buff_tmp[2][nsamps>>2];
   nsamps2 = (nsamps+3)>>2;
#endif

knopp's avatar
 
knopp committed
223

224
  if (device->type == USRP_B200_DEV) {  
225
    if (cc>1) {
gauthier's avatar
gauthier committed
226
    // receive multiple channels (e.g. RF A and RF B)
227
      std::vector<void *> buff_ptrs;
228
 
229 230 231
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff_tmp[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
gauthier's avatar
gauthier committed
232
    // receive a single channel (e.g. from connector RF A)
233 234 235
      samples_received = s->rx_stream->recv(buff_tmp[0], nsamps, s->rx_md);
    }
   
236
  // bring RX data into 12 LSBs for softmodem RX
237 238
    for (int i=0;i<cc;i++) {
      for (int j=0; j<nsamps2; j++) {      
239 240
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
241
        ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
242
#else
243
        ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
244 245
#endif
#elif defined(__arm__)
246
        ((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
247
#endif
248
      }
249
    }
250
  } else if (device->type == USRP_X300_DEV) {
251 252 253 254 255 256 257 258 259
    if (cc>1) {
    // receive multiple channels (e.g. RF A and RF B)
      std::vector<void *> buff_ptrs;
 
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
    // receive a single channel (e.g. from connector RF A)
      samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
navid's avatar
navid committed
260
    }
261
  }
262

knopp's avatar
 
knopp committed
263 264 265 266
  if (samples_received < nsamps) {
    printf("[recv] received %d samples out of %d\n",samples_received,nsamps);
    
  }
navid's avatar
navid committed
267

knopp's avatar
 
knopp committed
268 269 270 271 272 273 274 275 276 277 278 279 280 281 282
  //handle the error code
  switch(s->rx_md.error_code){
  case uhd::rx_metadata_t::ERROR_CODE_NONE:
    break;
  case uhd::rx_metadata_t::ERROR_CODE_OVERFLOW:
    printf("[recv] USRP RX OVERFLOW!\n");
    s->num_overflows++;
    break;
  case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT:
    printf("[recv] USRP RX TIMEOUT!\n");
    break;
  default:
    printf("[recv] Unexpected error on RX, Error code: 0x%x\n",s->rx_md.error_code);
    break;
  }
knopp's avatar
 
knopp committed
283 284 285
  s->rx_count += nsamps;
  s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
  *ptimestamp = s->rx_timestamp;
navid's avatar
navid committed
286

knopp's avatar
 
knopp committed
287 288 289
  return samples_received;
}

290 291 292
/*! \brief Get current timestamp of USRP
 * \param device the hardware to use
*/
knopp's avatar
 
knopp committed
293 294 295 296 297 298 299 300
openair0_timestamp get_usrp_time(openair0_device *device) 
{
 
  usrp_state_t *s = (usrp_state_t*)device->priv;
  
  return s->usrp->get_time_now().to_ticks(s->sample_rate);
} 

301 302 303 304
/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
knopp's avatar
 
knopp committed
305 306 307 308
static bool is_equal(double a, double b)
{
  return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
}
knopp's avatar
 
knopp committed
309

310 311 312 313 314 315
/*! \brief Set frequencies (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
 * \returns 0 in success 
 */
316
int trx_usrp_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, int dummy) {
knopp's avatar
 
knopp committed
317 318 319

  usrp_state_t *s = (usrp_state_t*)device->priv;

320
  printf("Setting USRP TX Freq %f, RX Freq %f\n",openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0]);
knopp's avatar
 
knopp committed
321 322 323 324 325 326 327
  s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[0]);
  s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[0]);

  return(0);
  
}

328 329 330 331 332
/*! \brief Set RX frequencies 
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
knopp's avatar
 
knopp committed
333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) {

  usrp_state_t *s = (usrp_state_t*)device->priv;
  static int first_call=1;
  static double rf_freq,diff;

  uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);

  rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
  rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
  rf_freq=openair0_cfg[0].rx_freq[0];
  s->usrp->set_rx_freq(rx_tune_req);

  return(0);
  
}

350 351 352 353 354
/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
355
int trx_usrp_set_gains(openair0_device* device, 
356
		       openair0_config_t *openair0_cfg) {
knopp's avatar
 
knopp committed
357 358 359 360

  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[0]);
361 362 363 364 365 366 367 368 369
  ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);
  // limit to maximum gain
  if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
    
    printf("RX Gain 0 too high, reduce by %f dB\n",
	   openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());	   
    exit(-1);
  }
  s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
370
  printf("Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n", openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],openair0_cfg[0].rx_gain[0],gain_range.stop());
371

knopp's avatar
 
knopp committed
372 373
  return(0);
}
374

375 376 377
/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
378
int trx_usrp_stop(int card) {
379 380
  return(0);
}
381

382
/*! \brief USRPB210 RX calibration table */
383
rx_gain_calib_table_t calib_table_b210[] = {
Raymond Knopp's avatar
Raymond Knopp committed
384 385 386 387 388
  {3500000000.0,44.0},
  {2660000000.0,49.0},
  {2300000000.0,50.0},
  {1880000000.0,53.0},
  {816000000.0,58.0},
389 390
  {-1,0}};

391
/*! \brief USRPB210 RX calibration table */
392 393 394 395 396 397
rx_gain_calib_table_t calib_table_b210_38[] = {
  {3500000000.0,44.0},
  {2660000000.0,49.8},
  {2300000000.0,51.0},
  {1880000000.0,53.0},
  {816000000.0,57.0},
398 399
  {-1,0}};

400
/*! \brief USRPx310 RX calibration table */
401 402
rx_gain_calib_table_t calib_table_x310[] = {
  {3500000000.0,77.0},
403
  {2660000000.0,81.0},
404 405
  {2300000000.0,81.0},
  {1880000000.0,82.0},
406
  {816000000.0,85.0},
407 408
  {-1,0}};

409 410 411 412 413
/*! \brief Set RX gain offset 
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
 * \returns 0 in success 
 */
414
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {
415 416 417

  int i=0;
  // loop through calibration table to find best adjustment factor for RX frequency
418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443
  double min_diff = 6e9,diff,gain_adj=0.0;
  if (bw_gain_adjust==1) {
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:      
      break;
    case 23040000:
      gain_adj=1.25;
      break;
    case 15360000:
      gain_adj=3.0;
      break;
    case 7680000:
      gain_adj=6.0;
      break;
    case 3840000:
      gain_adj=9.0;
      break;
    case 1920000:
      gain_adj=12.0;
      break;
    default:
      printf("unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
444 445
  while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
    diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
446
    printf("cal %d: freq %f, offset %f, diff %f\n",
447 448 449
	   i,
	   openair0_cfg->rx_gain_calib_table[i].freq,
	   openair0_cfg->rx_gain_calib_table[i].offset,diff);
450 451
    if (min_diff > diff) {
      min_diff = diff;
452
      openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
453 454 455 456 457 458
    }
    i++;
  }
  
}

459 460 461 462
/*! \brief print the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
463
int trx_usrp_get_stats(openair0_device* device) {
464

465 466 467
  return(0);

}
468 469 470 471 472

/*! \brief Reset the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
473
int trx_usrp_reset_stats(openair0_device* device) {
474 475 476 477

  return(0);

}
478

479

480

481
extern "C" {
482 483 484 485
/*! \brief Initialize Openair USRP target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
486
  int device_init(openair0_device* device, openair0_config_t *openair0_cfg) {
487
    
488 489 490 491 492
    uhd::set_thread_priority_safe(1.0);
    usrp_state_t *s = (usrp_state_t*)malloc(sizeof(usrp_state_t));
    memset(s, 0, sizeof(usrp_state_t));
    
    // Initialize USRP device
knopp's avatar
 
knopp committed
493

knopp's avatar
 
knopp committed
494

knopp's avatar
 
knopp committed
495
  std::string args = "type=b200";
knopp's avatar
knopp committed
496 497


knopp's avatar
 
knopp committed
498
  uhd::device_addrs_t device_adds = uhd::device::find(args);
knopp's avatar
 
knopp committed
499
  size_t i;
500 501 502 503 504
  
  int vers=0,subvers=0,subsubvers=0;
  int bw_gain_adjust=0;

  sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
knopp's avatar
 
knopp committed
505

506
  printf("Checking for USRPs : UHD %s (%d.%d.%d)\n",uhd::get_version_string().c_str(),vers,subvers,subsubvers);
507
  
knopp's avatar
 
knopp committed
508 509
  if(device_adds.size() == 0)
  {
510 511 512 513 514 515 516 517
    double usrp_master_clock = 184.32e6;

    std::string args = "type=x300";
    
    // workaround for an api problem, master clock has to be set with the constructor not via set_master_clock_rate
    args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
    
    uhd::device_addrs_t device_adds = uhd::device::find(args);
knopp's avatar
 
knopp committed
518

519 520 521 522 523
    if(device_adds.size() == 0)
    {
      std::cerr<<"No USRP Device Found. " << std::endl;
      free(s);
      return -1;
knopp's avatar
knopp committed
524

525
    }
knopp's avatar
knopp committed
526

527

528 529 530 531 532 533 534 535
    printf("Found USRP X300\n");
    s->usrp = uhd::usrp::multi_usrp::make(args);
    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);

    // lock mboard clocks
    s->usrp->set_clock_source("internal");
    
536
    //Setting device type to USRP X300/X310 
537
    device->type=USRP_X300_DEV;
538

539 540 541
    // this is not working yet, master clock has to be set via constructor
    // set master clock rate and sample rate for tx & rx for streaming
    //s->usrp->set_master_clock_rate(usrp_master_clock);
542 543

    openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
544
    
545 546
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
547 548 549
            // from usrp_time_offset
      openair0_cfg[0].samples_per_packet    = 2048;
      openair0_cfg[0].tx_sample_advance     = 15;
550 551
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
552
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
553
      break;
554
    case 15360000:
555 556
      openair0_cfg[0].samples_per_packet    = 2048;
      openair0_cfg[0].tx_sample_advance     = 45;
557 558
      openair0_cfg[0].tx_bw                 = 10e6;
      openair0_cfg[0].rx_bw                 = 10e6;
559
      openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
560
      break;
561
    case 7680000:
562 563
      openair0_cfg[0].samples_per_packet    = 1024;
      openair0_cfg[0].tx_sample_advance     = 50;
564 565
      openair0_cfg[0].tx_bw                 = 5e6;
      openair0_cfg[0].rx_bw                 = 5e6;
566
      openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
567
      break;
568
    case 1920000:
569 570
      openair0_cfg[0].samples_per_packet    = 256;
      openair0_cfg[0].tx_sample_advance     = 50;
571 572
      openair0_cfg[0].tx_bw                 = 1.25e6;
      openair0_cfg[0].rx_bw                 = 1.25e6;
573
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
574 575 576 577 578 579 580
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }

581 582
  } else {
    printf("Found USRP B200");
583
    args += ",num_recv_frames=256" ; 
584 585 586 587
    s->usrp = uhd::usrp::multi_usrp::make(args);

    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);
588 589 590 591
    
    // do not explicitly set the clock to "internal", because this will disable the gpsdo
    //    // lock mboard clocks
    //    s->usrp->set_clock_source("internal");
592
    // set master clock rate and sample rate for tx & rx for streaming
593

594
    device->type = USRP_B200_DEV;
595

knopp's avatar
knopp committed
596

597 598 599 600 601 602 603 604
    if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
      bw_gain_adjust=0;
    }
    else {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
      bw_gain_adjust=1;
    }
605

606 607
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
608
      s->usrp->set_master_clock_rate(30.72e6);
Raymond Knopp's avatar
Raymond Knopp committed
609
      openair0_cfg[0].samples_per_packet    = 4096;
610
      openair0_cfg[0].tx_sample_advance     = 115;
611 612
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
613
      openair0_cfg[0].tx_scheduling_advance = 11*openair0_cfg[0].samples_per_packet;
614
      break;
615
    case 23040000:
616
      s->usrp->set_master_clock_rate(23.04e6); //to be checked
617 618
      openair0_cfg[0].samples_per_packet    = 2048;
      openair0_cfg[0].tx_sample_advance     = 113;
619 620
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
621 622
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
      break;
623
    case 15360000:
624
      s->usrp->set_master_clock_rate(30.72e06);
625
      openair0_cfg[0].samples_per_packet    = 2048;
626
      openair0_cfg[0].tx_sample_advance     = 103; 
627 628
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
629
      openair0_cfg[0].tx_scheduling_advance = 10240;
630
      break;
631
    case 7680000:
Rohit Gupta's avatar
Rohit Gupta committed
632
      s->usrp->set_master_clock_rate(30.72e6);
633
      openair0_cfg[0].samples_per_packet    = 1024;
634
      openair0_cfg[0].tx_sample_advance     = 80;
635 636
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
637
      openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
638
      break;
639
    case 1920000:
640
      s->usrp->set_master_clock_rate(7.68e6);
641 642
      openair0_cfg[0].samples_per_packet    = 256;
      openair0_cfg[0].tx_sample_advance     = 40;
643 644
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
645
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
646 647 648 649 650 651 652
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
knopp's avatar
knopp committed
653

654
  /* device specific */
655 656 657 658
  openair0_cfg[0].txlaunch_wait = 1;//manage when TX processing is triggered
  openair0_cfg[0].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
  openair0_cfg[0].iq_txshift = 4;//shift
  openair0_cfg[0].iq_rxrescale = 15;//rescale iqs
659
  
knopp's avatar
 
knopp committed
660
  for(i=0;i<s->usrp->get_rx_num_channels();i++) {
knopp's avatar
 
knopp committed
661
    if (i<openair0_cfg[0].rx_num_channels) {
knopp's avatar
knopp committed
662
      s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
663 664
      //s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
      //printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
knopp's avatar
knopp committed
665
      s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
666
      set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
667 668 669 670 671 672 673 674 675 676 677 678

      ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
      // limit to maximum gain
      if (openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] > gain_range.stop()) {
	
        printf("RX Gain %lu too high, lower by %f dB\n",i,openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop());
	exit(-1);
      }
      s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i);
      printf("RX Gain %lu %f (%f) => %f (max %f)\n",i,
	     openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
	     openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
knopp's avatar
 
knopp committed
679 680
    }
  }
knopp's avatar
 
knopp committed
681
  for(i=0;i<s->usrp->get_tx_num_channels();i++) {
knopp's avatar
 
knopp committed
682
    if (i<openair0_cfg[0].tx_num_channels) {
knopp's avatar
knopp committed
683
      s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
684 685
      //s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
      //printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
knopp's avatar
knopp committed
686 687
      s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
      s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
knopp's avatar
 
knopp committed
688 689
    }
  }
knopp's avatar
knopp committed
690 691


knopp's avatar
 
knopp committed
692 693
  // display USRP settings
  std::cout << boost::format("Actual master clock: %fMHz...") % (s->usrp->get_master_clock_rate()/1e6) << std::endl;
694 695
  
  sleep(1);
knopp's avatar
 
knopp committed
696 697

  // create tx & rx streamer
knopp's avatar
 
knopp committed
698
  uhd::stream_args_t stream_args_rx("sc16", "sc16");
knopp's avatar
 
knopp committed
699
  //stream_args_rx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].rx_num_channels*openair0_cfg[0].samples_per_packet));
knopp's avatar
 
knopp committed
700
  for (i = 0; i<openair0_cfg[0].rx_num_channels; i++)
knopp's avatar
 
knopp committed
701 702 703 704 705 706 707
    stream_args_rx.channels.push_back(i);
  s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
  std::cout << boost::format("rx_max_num_samps %u") % (s->rx_stream->get_max_num_samps()) << std::endl;
  //openair0_cfg[0].samples_per_packet = s->rx_stream->get_max_num_samps();

  uhd::stream_args_t stream_args_tx("sc16", "sc16");
  //stream_args_tx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].tx_num_channels*openair0_cfg[0].samples_per_packet));
knopp's avatar
 
knopp committed
708
  for (i = 0; i<openair0_cfg[0].tx_num_channels; i++)
knopp's avatar
 
knopp committed
709 710
      stream_args_tx.channels.push_back(i);
  s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);
knopp's avatar
 
knopp committed
711 712
  std::cout << boost::format("tx_max_num_samps %u") % (s->tx_stream->get_max_num_samps()) << std::endl;

knopp's avatar
 
knopp committed
713

714 715 716 717 718
 /* Setting TX/RX BW after streamers are created due to USRP calibration issue */
  for(i=0;i<s->usrp->get_tx_num_channels();i++) {
    if (i<openair0_cfg[0].tx_num_channels) {
      s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
      printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
Rohit Gupta's avatar
Rohit Gupta committed
719 720 721 722 723
    }
  }
  for(i=0;i<s->usrp->get_rx_num_channels();i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
      s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
724 725 726 727
      printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
    }
  }

knopp's avatar
 
knopp committed
728
  s->usrp->set_time_now(uhd::time_spec_t(0.0));
729
 
730

knopp's avatar
knopp committed
731 732
  for (i=0;i<openair0_cfg[0].rx_num_channels;i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
knopp's avatar
 
knopp committed
733
      printf("RX Channel %lu\n",i);
knopp's avatar
knopp committed
734 735 736 737 738 739 740 741 742 743 744
      std::cout << boost::format("Actual RX sample rate: %fMSps...") % (s->usrp->get_rx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX frequency: %fGHz...") % (s->usrp->get_rx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual RX gain: %f...") % (s->usrp->get_rx_gain(i)) << std::endl;
      std::cout << boost::format("Actual RX bandwidth: %fM...") % (s->usrp->get_rx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX antenna: %s...") % (s->usrp->get_rx_antenna(i)) << std::endl;
    }
  }

  for (i=0;i<openair0_cfg[0].tx_num_channels;i++) {

    if (i<openair0_cfg[0].tx_num_channels) { 
knopp's avatar
 
knopp committed
745
      printf("TX Channel %lu\n",i);
knopp's avatar
knopp committed
746 747 748 749 750 751 752 753
      std::cout << std::endl<<boost::format("Actual TX sample rate: %fMSps...") % (s->usrp->get_tx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX frequency: %fGHz...") % (s->usrp->get_tx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual TX gain: %f...") % (s->usrp->get_tx_gain(i)) << std::endl;
      std::cout << boost::format("Actual TX bandwidth: %fM...") % (s->usrp->get_tx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX antenna: %s...") % (s->usrp->get_tx_antenna(i)) << std::endl;
    }
  }

knopp's avatar
 
knopp committed
754
  std::cout << boost::format("Device timestamp: %f...") % (s->usrp->get_time_now().get_real_secs()) << std::endl;
knopp's avatar
 
knopp committed
755 756 757 758

  device->priv = s;
  device->trx_start_func = trx_usrp_start;
  device->trx_write_func = trx_usrp_write;
759 760 761 762 763 764 765
  device->trx_read_func  = trx_usrp_read;
  device->trx_get_stats_func = trx_usrp_get_stats;
  device->trx_reset_stats_func = trx_usrp_reset_stats;
  device->trx_end_func   = trx_usrp_end;
  device->trx_stop_func  = trx_usrp_stop;
  device->trx_set_freq_func = trx_usrp_set_freq;
  device->trx_set_gains_func   = trx_usrp_set_gains;
766
  
knopp's avatar
knopp committed
767
  s->sample_rate = openair0_cfg[0].sample_rate;
knopp's avatar
 
knopp committed
768 769 770 771 772 773 774 775 776
  // TODO:
  // init tx_forward_nsamps based usrp_time_offset ex
  if(is_equal(s->sample_rate, (double)30.72e6))
    s->tx_forward_nsamps  = 176;
  if(is_equal(s->sample_rate, (double)15.36e6))
    s->tx_forward_nsamps = 90;
  if(is_equal(s->sample_rate, (double)7.68e6))
    s->tx_forward_nsamps = 50;
  return 0;
777
  }
knopp's avatar
 
knopp committed
778
}
779
/*@}*/