usrp_lib.cpp 24.8 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
/*******************************************************************************
    OpenAirInterface 
    Copyright(c) 1999 - 2014 Eurecom

    OpenAirInterface is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.


    OpenAirInterface is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with OpenAirInterface.The full GNU General Public License is 
    included in this distribution in the file called "COPYING". If not, 
    see <http://www.gnu.org/licenses/>.

   Contact Information
   OpenAirInterface Admin: openair_admin@eurecom.fr
   OpenAirInterface Tech : openair_tech@eurecom.fr
24
   OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
25
  
ghaddab's avatar
ghaddab committed
26
   Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
27 28

 *******************************************************************************/
knopp's avatar
 
knopp committed
29 30 31

/** usrp_lib.cpp
 *
32
 * \author: HongliangXU : hong-liang-xu@agilent.com
knopp's avatar
 
knopp committed
33 34 35 36 37 38 39 40
 */

#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
#include <uhd/utils/thread_priority.hpp>
#include <uhd/usrp/multi_usrp.hpp>
41
#include <uhd/version.hpp>
knopp's avatar
 
knopp committed
42 43 44 45 46 47
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
48

knopp's avatar
 
knopp committed
49
#include "common_lib.h"
50 51 52 53 54 55 56
#ifdef __SSE4_1__
#  include <smmintrin.h>
#endif
 
#ifdef __AVX2__
#  include <immintrin.h>
#endif
57

58 59 60 61 62
/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */

/*! \brief USRP Configuration */ 
knopp's avatar
 
knopp committed
63 64 65 66 67 68
typedef struct
{

  // --------------------------------
  // variables for USRP configuration
  // --------------------------------
69
  //! USRP device pointer
knopp's avatar
 
knopp committed
70 71
  uhd::usrp::multi_usrp::sptr usrp;
  //uhd::usrp::multi_usrp::sptr rx_usrp;
72
  
knopp's avatar
 
knopp committed
73
  //create a send streamer and a receive streamer
74
  //! USRP TX Stream
knopp's avatar
 
knopp committed
75
  uhd::tx_streamer::sptr tx_stream;
76
  //! USRP RX Stream
knopp's avatar
 
knopp committed
77 78
  uhd::rx_streamer::sptr rx_stream;

79
  //! USRP TX Metadata
knopp's avatar
 
knopp committed
80
  uhd::tx_metadata_t tx_md;
81
  //! USRP RX Metadata
knopp's avatar
 
knopp committed
82 83
  uhd::rx_metadata_t rx_md;

84
  //! USRP Timestamp Information
knopp's avatar
 
knopp committed
85
  uhd::time_spec_t tm_spec;
86

knopp's avatar
 
knopp committed
87
  //setup variables and allocate buffer
88
  //! USRP Metadata
knopp's avatar
 
knopp committed
89 90
  uhd::async_metadata_t async_md;

91
  //! Sampling rate
knopp's avatar
 
knopp committed
92
  double sample_rate;
93 94

  //! time offset between transmiter timestamp and receiver timestamp;
knopp's avatar
 
knopp committed
95
  double tdiff;
96 97

  //! TX forward samples. We use usrp_time_offset to get this value
knopp's avatar
 
knopp committed
98 99 100 101 102 103
  int tx_forward_nsamps; //166 for 20Mhz


  // --------------------------------
  // Debug and output control
  // --------------------------------
104
  //! Number of underflows
knopp's avatar
 
knopp committed
105
  int num_underflows;
106
  //! Number of overflows
knopp's avatar
 
knopp committed
107
  int num_overflows;
108 109
  
  //! Number of sequential errors
knopp's avatar
 
knopp committed
110
  int num_seq_errors;
111
  //! tx count
knopp's avatar
 
knopp committed
112
  int64_t tx_count;
113
  //! rx count
knopp's avatar
 
knopp committed
114
  int64_t rx_count;
115
  //! timestamp of RX packet
knopp's avatar
 
knopp committed
116 117 118 119
  openair0_timestamp rx_timestamp;

} usrp_state_t;

120 121 122
/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
knopp's avatar
 
knopp committed
123 124 125 126 127 128
static int trx_usrp_start(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  // init recv and send streaming
  uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
knopp's avatar
 
knopp committed
129
  cmd.time_spec = s->usrp->get_time_now() + uhd::time_spec_t(0.05);
knopp's avatar
 
knopp committed
130 131 132
  cmd.stream_now = false; // start at constant delay
  s->rx_stream->issue_stream_cmd(cmd);

knopp's avatar
 
knopp committed
133
  s->tx_md.time_spec = cmd.time_spec + uhd::time_spec_t(1-(double)s->tx_forward_nsamps/s->sample_rate);
knopp's avatar
 
knopp committed
134 135 136 137 138 139 140 141
  s->tx_md.has_time_spec = true;
  s->tx_md.start_of_burst = true;
  s->tx_md.end_of_burst = false;


  s->rx_count = 0;
  s->tx_count = 0;
  s->rx_timestamp = 0;
142 143

  return 0;
knopp's avatar
 
knopp committed
144
}
145 146 147
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources 
 * \param device the hardware to use
 */
knopp's avatar
 
knopp committed
148 149 150 151 152 153
static void trx_usrp_end(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->rx_stream->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);

navid's avatar
navid committed
154 155 156 157 158
  //send a mini EOB packet
  s->tx_md.end_of_burst = true;
  s->tx_stream->send("", 0, s->tx_md);
  s->tx_md.end_of_burst = false;
  
knopp's avatar
 
knopp committed
159
}
160

161 162 163 164 165 166 167 168
/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
      @param timestamp The timestamp at whicch the first sample MUST be sent 
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
      @param antenna_id index of the antenna if the device has multiple anteannas
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
*/ 
169
static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags)
knopp's avatar
 
knopp committed
170 171 172 173 174 175 176
{
  usrp_state_t *s = (usrp_state_t*)device->priv;
  s->tx_md.time_spec = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
  if(flags)
    s->tx_md.has_time_spec = true;
  else
    s->tx_md.has_time_spec = false;
knopp's avatar
knopp committed
177 178 179 180 181 182 183 184

  if (cc>1) {
    std::vector<void *> buff_ptrs;
    for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
    s->tx_stream->send(buff_ptrs, nsamps, s->tx_md);
  }
  else
    s->tx_stream->send(buff[0], nsamps, s->tx_md);
knopp's avatar
 
knopp committed
185
  s->tx_md.start_of_burst = false;
186 187

  return 0;
knopp's avatar
 
knopp committed
188 189
}

190 191 192 193 194 195 196 197 198 199 200
/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
knopp's avatar
 
knopp committed
201
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc)
knopp's avatar
 
knopp committed
202
{
203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218
   usrp_state_t *s = (usrp_state_t*)device->priv;
   int samples_received=0,i,j;
   int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
   __m256i buff_tmp[2][nsamps>>3];
   nsamps2 = (nsamps+7)>>3;
#else
   __m128i buff_tmp[2][nsamps>>2];
   nsamps2 = (nsamps+3)>>2;
#endif
#elif defined(__arm__)
   int16x8_t buff_tmp[2][nsamps>>2];
   nsamps2 = (nsamps+3)>>2;
#endif

knopp's avatar
 
knopp committed
219

220 221
  if (device->type == USRP_B200_IF) {  
    if (cc>1) {
gauthier's avatar
gauthier committed
222
    // receive multiple channels (e.g. RF A and RF B)
223
      std::vector<void *> buff_ptrs;
224
 
225 226 227
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff_tmp[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
gauthier's avatar
gauthier committed
228
    // receive a single channel (e.g. from connector RF A)
229 230 231
      samples_received = s->rx_stream->recv(buff_tmp[0], nsamps, s->rx_md);
    }
   
232
  // bring RX data into 12 LSBs for softmodem RX
233 234
    for (int i=0;i<cc;i++) {
      for (int j=0; j<nsamps2; j++) {      
235 236
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
237
        ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
238
#else
239
        ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
240 241
#endif
#elif defined(__arm__)
242
        ((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
243
#endif
244
      }
245
    }
246 247 248 249 250 251 252 253 254 255
  } else if (device->type == USRP_X300_IF) {
    if (cc>1) {
    // receive multiple channels (e.g. RF A and RF B)
      std::vector<void *> buff_ptrs;
 
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
    // receive a single channel (e.g. from connector RF A)
      samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
navid's avatar
navid committed
256
    }
257
  }
258

knopp's avatar
 
knopp committed
259 260 261 262
  if (samples_received < nsamps) {
    printf("[recv] received %d samples out of %d\n",samples_received,nsamps);
    
  }
navid's avatar
navid committed
263

knopp's avatar
 
knopp committed
264 265 266 267 268 269 270 271 272 273 274 275 276 277 278
  //handle the error code
  switch(s->rx_md.error_code){
  case uhd::rx_metadata_t::ERROR_CODE_NONE:
    break;
  case uhd::rx_metadata_t::ERROR_CODE_OVERFLOW:
    printf("[recv] USRP RX OVERFLOW!\n");
    s->num_overflows++;
    break;
  case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT:
    printf("[recv] USRP RX TIMEOUT!\n");
    break;
  default:
    printf("[recv] Unexpected error on RX, Error code: 0x%x\n",s->rx_md.error_code);
    break;
  }
knopp's avatar
 
knopp committed
279 280 281
  s->rx_count += nsamps;
  s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
  *ptimestamp = s->rx_timestamp;
navid's avatar
navid committed
282

knopp's avatar
 
knopp committed
283 284 285
  return samples_received;
}

286 287 288
/*! \brief Get current timestamp of USRP
 * \param device the hardware to use
*/
knopp's avatar
 
knopp committed
289 290 291 292 293 294 295 296
openair0_timestamp get_usrp_time(openair0_device *device) 
{
 
  usrp_state_t *s = (usrp_state_t*)device->priv;
  
  return s->usrp->get_time_now().to_ticks(s->sample_rate);
} 

297 298 299 300
/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
knopp's avatar
 
knopp committed
301 302 303 304
static bool is_equal(double a, double b)
{
  return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
}
knopp's avatar
 
knopp committed
305

306 307 308 309 310 311
/*! \brief Set frequencies (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
 * \returns 0 in success 
 */
312
int trx_usrp_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, int dummy) {
knopp's avatar
 
knopp committed
313 314 315 316 317 318 319 320 321 322

  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[0]);
  s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[0]);

  return(0);
  
}

323 324 325 326 327
/*! \brief Set RX frequencies 
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
knopp's avatar
 
knopp committed
328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) {

  usrp_state_t *s = (usrp_state_t*)device->priv;
  static int first_call=1;
  static double rf_freq,diff;

  uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);

  rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
  rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
  rf_freq=openair0_cfg[0].rx_freq[0];
  s->usrp->set_rx_freq(rx_tune_req);

  return(0);
  
}

345 346 347 348 349
/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
350
int trx_usrp_set_gains(openair0_device* device, 
351
		       openair0_config_t *openair0_cfg) {
knopp's avatar
 
knopp committed
352 353 354 355

  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[0]);
356 357 358 359 360 361 362 363 364
  ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);
  // limit to maximum gain
  if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
    
    printf("RX Gain 0 too high, reduce by %f dB\n",
	   openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());	   
    exit(-1);
  }
  s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
365
  printf("Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n", openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],openair0_cfg[0].rx_gain[0],gain_range.stop());
366

knopp's avatar
 
knopp committed
367 368
  return(0);
}
369

370 371 372
/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
373
int trx_usrp_stop(int card) {
374 375
  return(0);
}
376

377
/*! \brief USRPB210 RX calibration table */
378
rx_gain_calib_table_t calib_table_b210[] = {
Raymond Knopp's avatar
Raymond Knopp committed
379 380 381 382 383
  {3500000000.0,44.0},
  {2660000000.0,49.0},
  {2300000000.0,50.0},
  {1880000000.0,53.0},
  {816000000.0,58.0},
384 385
  {-1,0}};

386 387 388 389 390 391
rx_gain_calib_table_t calib_table_b210_38[] = {
  {3500000000.0,44.0},
  {2660000000.0,49.8},
  {2300000000.0,51.0},
  {1880000000.0,53.0},
  {816000000.0,57.0},
392 393
  {-1,0}};

394
/*! \brief USRPx310 RX calibration table */
395 396
rx_gain_calib_table_t calib_table_x310[] = {
  {3500000000.0,77.0},
397
  {2660000000.0,81.0},
398 399
  {2300000000.0,81.0},
  {1880000000.0,82.0},
400
  {816000000.0,85.0},
401 402
  {-1,0}};

403 404 405 406 407
/*! \brief Set RX gain offset 
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
 * \returns 0 in success 
 */
408
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {
409 410 411

  int i=0;
  // loop through calibration table to find best adjustment factor for RX frequency
412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437
  double min_diff = 6e9,diff,gain_adj=0.0;
  if (bw_gain_adjust==1) {
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:      
      break;
    case 23040000:
      gain_adj=1.25;
      break;
    case 15360000:
      gain_adj=3.0;
      break;
    case 7680000:
      gain_adj=6.0;
      break;
    case 3840000:
      gain_adj=9.0;
      break;
    case 1920000:
      gain_adj=12.0;
      break;
    default:
      printf("unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
438 439
  while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
    diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
440
    printf("cal %d: freq %f, offset %f, diff %f\n",
441 442 443
	   i,
	   openair0_cfg->rx_gain_calib_table[i].freq,
	   openair0_cfg->rx_gain_calib_table[i].offset,diff);
444 445
    if (min_diff > diff) {
      min_diff = diff;
446
      openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
447 448 449 450 451 452
    }
    i++;
  }
  
}

453 454 455 456
/*! \brief print the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
457
int trx_usrp_get_stats(openair0_device* device) {
458

459 460 461
  return(0);

}
462 463 464 465 466

/*! \brief Reset the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
467
int trx_usrp_reset_stats(openair0_device* device) {
468 469 470 471

  return(0);

}
472

473 474 475 476
/*! \brief Initialize Openair USRP target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
navid's avatar
navid committed
477
int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_cfg)
knopp's avatar
 
knopp committed
478
{
knopp's avatar
knopp committed
479
  uhd::set_thread_priority_safe(1.0);
knopp's avatar
 
knopp committed
480 481 482 483
  usrp_state_t *s = (usrp_state_t*)malloc(sizeof(usrp_state_t));
  memset(s, 0, sizeof(usrp_state_t));

  // Initialize USRP device
knopp's avatar
 
knopp committed
484

knopp's avatar
 
knopp committed
485
  std::string args = "type=b200";
knopp's avatar
knopp committed
486 487


knopp's avatar
 
knopp committed
488
  uhd::device_addrs_t device_adds = uhd::device::find(args);
knopp's avatar
 
knopp committed
489
  size_t i;
490 491 492 493 494
  
  int vers=0,subvers=0,subsubvers=0;
  int bw_gain_adjust=0;

  sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
knopp's avatar
 
knopp committed
495

496
  printf("Checking for USRPs : UHD %s (%d.%d.%d)\n",uhd::get_version_string().c_str(),vers,subvers,subsubvers);
497
  
knopp's avatar
 
knopp committed
498 499
  if(device_adds.size() == 0)
  {
500 501 502 503 504 505 506 507
    double usrp_master_clock = 184.32e6;

    std::string args = "type=x300";
    
    // workaround for an api problem, master clock has to be set with the constructor not via set_master_clock_rate
    args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
    
    uhd::device_addrs_t device_adds = uhd::device::find(args);
knopp's avatar
 
knopp committed
508

509 510 511 512 513
    if(device_adds.size() == 0)
    {
      std::cerr<<"No USRP Device Found. " << std::endl;
      free(s);
      return -1;
knopp's avatar
knopp committed
514

515
    }
knopp's avatar
knopp committed
516

517

518 519 520 521 522 523 524 525
    printf("Found USRP X300\n");
    s->usrp = uhd::usrp::multi_usrp::make(args);
    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);

    // lock mboard clocks
    s->usrp->set_clock_source("internal");
    
526 527 528
    //Setting device type to USRP X300/X310 
    device->type=USRP_X300_IF;

529 530 531
    // this is not working yet, master clock has to be set via constructor
    // set master clock rate and sample rate for tx & rx for streaming
    //s->usrp->set_master_clock_rate(usrp_master_clock);
532 533

    openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
534

535 536
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
537 538 539
            // from usrp_time_offset
      openair0_cfg[0].samples_per_packet    = 2048;
      openair0_cfg[0].tx_sample_advance     = 15;
540 541
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
542
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
543
      break;
544
    case 15360000:
545 546
      openair0_cfg[0].samples_per_packet    = 2048;
      openair0_cfg[0].tx_sample_advance     = 45;
547 548
      openair0_cfg[0].tx_bw                 = 10e6;
      openair0_cfg[0].rx_bw                 = 10e6;
549
      openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
550
      break;
551
    case 7680000:
552 553
      openair0_cfg[0].samples_per_packet    = 1024;
      openair0_cfg[0].tx_sample_advance     = 50;
554 555
      openair0_cfg[0].tx_bw                 = 5e6;
      openair0_cfg[0].rx_bw                 = 5e6;
556
      openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
557
      break;
558
    case 1920000:
559 560
      openair0_cfg[0].samples_per_packet    = 256;
      openair0_cfg[0].tx_sample_advance     = 50;
561 562
      openair0_cfg[0].tx_bw                 = 1.25e6;
      openair0_cfg[0].rx_bw                 = 1.25e6;
563
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
564 565 566 567 568 569 570
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }

571 572
  } else {
    printf("Found USRP B200");
573
    args += ",num_recv_frames=256" ; 
574 575 576 577 578
    s->usrp = uhd::usrp::multi_usrp::make(args);

    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);

579 580 581
// do not explicitly set the clock to "internal", because this will disable the gpsdo
//    // lock mboard clocks
//    s->usrp->set_clock_source("internal");
582
    // set master clock rate and sample rate for tx & rx for streaming
583

584
    device->type = USRP_B200_IF;
585

knopp's avatar
knopp committed
586

587 588 589 590 591 592 593 594
    if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
      bw_gain_adjust=0;
    }
    else {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
      bw_gain_adjust=1;
    }
595 596
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
597
      s->usrp->set_master_clock_rate(30.72e6);
598
            // from usrp_time_offset
Raymond Knopp's avatar
Raymond Knopp committed
599
      openair0_cfg[0].samples_per_packet    = 4096;
600
      openair0_cfg[0].tx_sample_advance     = 115;
601 602
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
603
      openair0_cfg[0].tx_scheduling_advance = 11*openair0_cfg[0].samples_per_packet;
604
      break;
605 606 607 608
    case 23040000:
      s->usrp->set_master_clock_rate(46.08e6);
      openair0_cfg[0].samples_per_packet    = 2048;
      openair0_cfg[0].tx_sample_advance     = 113;
609 610
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
611 612
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
      break;
613
    case 15360000:
614
      s->usrp->set_master_clock_rate(30.72e6);
615
      openair0_cfg[0].samples_per_packet    = 2048;
616
      openair0_cfg[0].tx_sample_advance     = 113;
617 618
      openair0_cfg[0].tx_bw                 = 10e6;
      openair0_cfg[0].rx_bw                 = 10e6;
619
      openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
620
      break;
621
    case 7680000:
622
      s->usrp->set_master_clock_rate(30.72e6);
623
      openair0_cfg[0].samples_per_packet    = 1024;
gauthier's avatar
gauthier committed
624
      openair0_cfg[0].tx_sample_advance     = 70;//103;
625 626
      openair0_cfg[0].tx_bw                 = 5e6;
      openair0_cfg[0].rx_bw                 = 5e6;
627
      openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
628
      break;
629
    case 1920000:
630
      s->usrp->set_master_clock_rate(30.72e6);
631 632
      openair0_cfg[0].samples_per_packet    = 256;
      openair0_cfg[0].tx_sample_advance     = 40;
633 634
      openair0_cfg[0].tx_bw                 = 1.25e6;
      openair0_cfg[0].rx_bw                 = 1.25e6;
635
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
636 637 638 639 640 641 642
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
knopp's avatar
knopp committed
643

knopp's avatar
 
knopp committed
644
  for(i=0;i<s->usrp->get_rx_num_channels();i++) {
knopp's avatar
 
knopp committed
645
    if (i<openair0_cfg[0].rx_num_channels) {
knopp's avatar
knopp committed
646
      s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
kortke's avatar
kortke committed
647
      s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
gauthier's avatar
gauthier committed
648
      printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
knopp's avatar
knopp committed
649
      s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
650
      set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
651 652 653 654 655 656 657 658 659 660 661 662

      ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
      // limit to maximum gain
      if (openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] > gain_range.stop()) {
	
        printf("RX Gain %lu too high, lower by %f dB\n",i,openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop());
	exit(-1);
      }
      s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i);
      printf("RX Gain %lu %f (%f) => %f (max %f)\n",i,
	     openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
	     openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
knopp's avatar
 
knopp committed
663 664
    }
  }
knopp's avatar
 
knopp committed
665
  for(i=0;i<s->usrp->get_tx_num_channels();i++) {
knopp's avatar
 
knopp committed
666
    if (i<openair0_cfg[0].tx_num_channels) {
knopp's avatar
knopp committed
667 668
      s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
      s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
gauthier's avatar
gauthier committed
669
      printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
knopp's avatar
knopp committed
670 671
      s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
      s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
knopp's avatar
 
knopp committed
672 673
    }
  }
knopp's avatar
knopp committed
674 675


knopp's avatar
 
knopp committed
676 677
  // display USRP settings
  std::cout << boost::format("Actual master clock: %fMHz...") % (s->usrp->get_master_clock_rate()/1e6) << std::endl;
knopp's avatar
 
knopp committed
678 679

  // create tx & rx streamer
knopp's avatar
 
knopp committed
680
  uhd::stream_args_t stream_args_rx("sc16", "sc16");
knopp's avatar
 
knopp committed
681
  //stream_args_rx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].rx_num_channels*openair0_cfg[0].samples_per_packet));
knopp's avatar
 
knopp committed
682
  for (i = 0; i<openair0_cfg[0].rx_num_channels; i++)
knopp's avatar
 
knopp committed
683 684 685 686 687 688 689
    stream_args_rx.channels.push_back(i);
  s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
  std::cout << boost::format("rx_max_num_samps %u") % (s->rx_stream->get_max_num_samps()) << std::endl;
  //openair0_cfg[0].samples_per_packet = s->rx_stream->get_max_num_samps();

  uhd::stream_args_t stream_args_tx("sc16", "sc16");
  //stream_args_tx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].tx_num_channels*openair0_cfg[0].samples_per_packet));
knopp's avatar
 
knopp committed
690
  for (i = 0; i<openair0_cfg[0].tx_num_channels; i++)
knopp's avatar
 
knopp committed
691 692
      stream_args_tx.channels.push_back(i);
  s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);
knopp's avatar
 
knopp committed
693 694
  std::cout << boost::format("tx_max_num_samps %u") % (s->tx_stream->get_max_num_samps()) << std::endl;

knopp's avatar
 
knopp committed
695 696 697

  s->usrp->set_time_now(uhd::time_spec_t(0.0));

knopp's avatar
 
knopp committed
698 699 700


  
701

knopp's avatar
knopp committed
702 703
  for (i=0;i<openair0_cfg[0].rx_num_channels;i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
knopp's avatar
 
knopp committed
704
      printf("RX Channel %lu\n",i);
knopp's avatar
knopp committed
705 706 707 708 709 710 711 712 713 714 715
      std::cout << boost::format("Actual RX sample rate: %fMSps...") % (s->usrp->get_rx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX frequency: %fGHz...") % (s->usrp->get_rx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual RX gain: %f...") % (s->usrp->get_rx_gain(i)) << std::endl;
      std::cout << boost::format("Actual RX bandwidth: %fM...") % (s->usrp->get_rx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX antenna: %s...") % (s->usrp->get_rx_antenna(i)) << std::endl;
    }
  }

  for (i=0;i<openair0_cfg[0].tx_num_channels;i++) {

    if (i<openair0_cfg[0].tx_num_channels) { 
knopp's avatar
 
knopp committed
716
      printf("TX Channel %lu\n",i);
knopp's avatar
knopp committed
717 718 719 720 721 722 723 724
      std::cout << std::endl<<boost::format("Actual TX sample rate: %fMSps...") % (s->usrp->get_tx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX frequency: %fGHz...") % (s->usrp->get_tx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual TX gain: %f...") % (s->usrp->get_tx_gain(i)) << std::endl;
      std::cout << boost::format("Actual TX bandwidth: %fM...") % (s->usrp->get_tx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX antenna: %s...") % (s->usrp->get_tx_antenna(i)) << std::endl;
    }
  }

knopp's avatar
 
knopp committed
725
  std::cout << boost::format("Device timestamp: %f...") % (s->usrp->get_time_now().get_real_secs()) << std::endl;
knopp's avatar
 
knopp committed
726 727 728 729

  device->priv = s;
  device->trx_start_func = trx_usrp_start;
  device->trx_write_func = trx_usrp_write;
730 731 732 733 734 735 736
  device->trx_read_func  = trx_usrp_read;
  device->trx_get_stats_func = trx_usrp_get_stats;
  device->trx_reset_stats_func = trx_usrp_reset_stats;
  device->trx_end_func   = trx_usrp_end;
  device->trx_stop_func  = trx_usrp_stop;
  device->trx_set_freq_func = trx_usrp_set_freq;
  device->trx_set_gains_func   = trx_usrp_set_gains;
737
  
knopp's avatar
knopp committed
738
  s->sample_rate = openair0_cfg[0].sample_rate;
knopp's avatar
 
knopp committed
739 740 741 742 743 744 745 746 747 748
  // TODO:
  // init tx_forward_nsamps based usrp_time_offset ex
  if(is_equal(s->sample_rate, (double)30.72e6))
    s->tx_forward_nsamps  = 176;
  if(is_equal(s->sample_rate, (double)15.36e6))
    s->tx_forward_nsamps = 90;
  if(is_equal(s->sample_rate, (double)7.68e6))
    s->tx_forward_nsamps = 50;
  return 0;
}
749
/*@}*/