usrp_lib.cpp 28.1 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
/*******************************************************************************
    OpenAirInterface 
    Copyright(c) 1999 - 2014 Eurecom

    OpenAirInterface is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.


    OpenAirInterface is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with OpenAirInterface.The full GNU General Public License is 
    included in this distribution in the file called "COPYING". If not, 
    see <http://www.gnu.org/licenses/>.

   Contact Information
   OpenAirInterface Admin: openair_admin@eurecom.fr
   OpenAirInterface Tech : openair_tech@eurecom.fr
24
   OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
25
  
ghaddab's avatar
ghaddab committed
26
   Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
27 28

 *******************************************************************************/
knopp's avatar
 
knopp committed
29 30 31

/** usrp_lib.cpp
 *
32
 * \author: HongliangXU : hong-liang-xu@agilent.com
knopp's avatar
 
knopp committed
33 34 35 36 37 38 39 40
 */

#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
#include <uhd/utils/thread_priority.hpp>
#include <uhd/usrp/multi_usrp.hpp>
41
#include <uhd/version.hpp>
knopp's avatar
 
knopp committed
42 43 44 45 46 47
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
48
#include <time.h>
Rohit Gupta's avatar
Rohit Gupta committed
49
#include "UTIL/LOG/log_extern.h"
knopp's avatar
 
knopp committed
50
#include "common_lib.h"
51 52 53 54 55 56 57
#ifdef __SSE4_1__
#  include <smmintrin.h>
#endif
 
#ifdef __AVX2__
#  include <immintrin.h>
#endif
58

59 60 61 62
#ifdef __arm__
#  include <arm_neon.h>
#endif

63 64 65 66 67
/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */

/*! \brief USRP Configuration */ 
knopp's avatar
 
knopp committed
68 69 70 71 72 73
typedef struct
{

  // --------------------------------
  // variables for USRP configuration
  // --------------------------------
74
  //! USRP device pointer
knopp's avatar
 
knopp committed
75 76
  uhd::usrp::multi_usrp::sptr usrp;
  //uhd::usrp::multi_usrp::sptr rx_usrp;
77
  
knopp's avatar
 
knopp committed
78
  //create a send streamer and a receive streamer
79
  //! USRP TX Stream
knopp's avatar
 
knopp committed
80
  uhd::tx_streamer::sptr tx_stream;
81
  //! USRP RX Stream
knopp's avatar
 
knopp committed
82 83
  uhd::rx_streamer::sptr rx_stream;

84
  //! USRP TX Metadata
knopp's avatar
 
knopp committed
85
  uhd::tx_metadata_t tx_md;
86
  //! USRP RX Metadata
knopp's avatar
 
knopp committed
87 88
  uhd::rx_metadata_t rx_md;

89
  //! USRP Timestamp Information
knopp's avatar
 
knopp committed
90
  uhd::time_spec_t tm_spec;
91

knopp's avatar
 
knopp committed
92
  //setup variables and allocate buffer
93
  //! USRP Metadata
knopp's avatar
 
knopp committed
94 95
  uhd::async_metadata_t async_md;

96
  //! Sampling rate
knopp's avatar
 
knopp committed
97
  double sample_rate;
98 99

  //! time offset between transmiter timestamp and receiver timestamp;
knopp's avatar
 
knopp committed
100
  double tdiff;
101 102

  //! TX forward samples. We use usrp_time_offset to get this value
knopp's avatar
 
knopp committed
103 104 105 106 107 108
  int tx_forward_nsamps; //166 for 20Mhz


  // --------------------------------
  // Debug and output control
  // --------------------------------
109
  //! Number of underflows
knopp's avatar
 
knopp committed
110
  int num_underflows;
111
  //! Number of overflows
knopp's avatar
 
knopp committed
112
  int num_overflows;
113 114
  
  //! Number of sequential errors
knopp's avatar
 
knopp committed
115
  int num_seq_errors;
116
  //! tx count
knopp's avatar
 
knopp committed
117
  int64_t tx_count;
118
  //! rx count
knopp's avatar
 
knopp committed
119
  int64_t rx_count;
120
  //! timestamp of RX packet
knopp's avatar
 
knopp committed
121 122 123 124
  openair0_timestamp rx_timestamp;

} usrp_state_t;

125 126 127
/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
knopp's avatar
 
knopp committed
128 129 130 131 132 133
static int trx_usrp_start(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  // init recv and send streaming
  uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
knopp's avatar
 
knopp committed
134
  cmd.time_spec = s->usrp->get_time_now() + uhd::time_spec_t(0.05);
knopp's avatar
 
knopp committed
135 136 137
  cmd.stream_now = false; // start at constant delay
  s->rx_stream->issue_stream_cmd(cmd);

knopp's avatar
 
knopp committed
138
  s->tx_md.time_spec = cmd.time_spec + uhd::time_spec_t(1-(double)s->tx_forward_nsamps/s->sample_rate);
knopp's avatar
 
knopp committed
139 140 141 142 143 144 145 146
  s->tx_md.has_time_spec = true;
  s->tx_md.start_of_burst = true;
  s->tx_md.end_of_burst = false;


  s->rx_count = 0;
  s->tx_count = 0;
  s->rx_timestamp = 0;
147 148

  return 0;
knopp's avatar
 
knopp committed
149
}
150 151 152
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources 
 * \param device the hardware to use
 */
knopp's avatar
 
knopp committed
153 154 155 156 157 158
static void trx_usrp_end(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->rx_stream->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);

navid's avatar
navid committed
159 160 161 162 163
  //send a mini EOB packet
  s->tx_md.end_of_burst = true;
  s->tx_stream->send("", 0, s->tx_md);
  s->tx_md.end_of_burst = false;
  
knopp's avatar
 
knopp committed
164
}
165

166 167 168 169 170 171 172 173
/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
      @param timestamp The timestamp at whicch the first sample MUST be sent 
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
      @param antenna_id index of the antenna if the device has multiple anteannas
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
*/ 
174
static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags)
knopp's avatar
 
knopp committed
175
{
176 177 178 179 180 181 182
   static long long int loop=0;
   static long time_min=0, time_max=0, time_avg=0;
   struct timespec tp_start, tp_end;
   long time_diff;
   clock_gettime(CLOCK_MONOTONIC_RAW, &tp_start);

  int ret=0, ret_i=0;
knopp's avatar
 
knopp committed
183
  usrp_state_t *s = (usrp_state_t*)device->priv;
knopp's avatar
knopp committed
184

185
  s->tx_md.time_spec = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
knopp's avatar
knopp committed
186

187
  
knopp's avatar
 
knopp committed
188 189 190 191
  if(flags)
    s->tx_md.has_time_spec = true;
  else
    s->tx_md.has_time_spec = false;
192
  
knopp's avatar
knopp committed
193 194 195
  if (cc>1) {
    std::vector<void *> buff_ptrs;
    for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
196
    ret = (int)s->tx_stream->send(buff_ptrs, nsamps, s->tx_md,1e-3);
knopp's avatar
knopp committed
197 198
  }
  else
199 200
    ret = (int)s->tx_stream->send(buff[0], nsamps, s->tx_md,1e-3);

knopp's avatar
 
knopp committed
201
  s->tx_md.start_of_burst = false;
202

203 204 205
  if (ret != nsamps) {
    printf("[xmit] tx samples %d != %d\n",ret,nsamps);
  }
206 207 208 209 210 211 212 213 214 215 216

  clock_gettime(CLOCK_MONOTONIC_RAW, &tp_end);
  time_diff = (tp_end.tv_sec - tp_start.tv_sec) *1E09  + (tp_end.tv_nsec - tp_start.tv_nsec);
  if  (time_min==0 ||loop==1 || time_min > time_diff)
    time_min=time_diff;
  if  (time_max==0 ||loop==1 || time_max < time_diff)
    time_max=time_diff;
  if (time_avg ==0 ||loop==1)
    time_avg= time_diff;
  else
    time_avg=(time_diff+time_avg) /2.0;
Rohit Gupta's avatar
Rohit Gupta committed
217

218
  /*   //prints statics of uhd every 10 seconds
Rohit Gupta's avatar
Rohit Gupta committed
219 220
   if ( loop % (10 * ((int)device->openair0_cfg[0].sample_rate /(int)nsamps )) ==0)
     LOG_I(HW,"usrp_write: min(ns)=%d, max(ns)=%d, avg(ns)=%d\n", (int)time_min, (int)time_max,(int)time_avg);
221
  */
222
   loop++;
223
  return ret;
knopp's avatar
 
knopp committed
224 225
}

226 227 228 229 230 231 232 233 234 235 236
/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
knopp's avatar
 
knopp committed
237
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc)
knopp's avatar
 
knopp committed
238
{
239 240 241 242 243
   static long long int loop=0;
   static long time_min=0, time_max=0, time_avg=0;
   struct timespec tp_start, tp_end;
   long time_diff;
   clock_gettime(CLOCK_MONOTONIC_RAW, &tp_start);
244 245 246 247 248 249
   usrp_state_t *s = (usrp_state_t*)device->priv;
   int samples_received=0,i,j;
   int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
   nsamps2 = (nsamps+7)>>3;
250
   __m256i buff_tmp[2][nsamps2];
251 252
#else
   nsamps2 = (nsamps+3)>>2;
253
   __m128i buff_tmp[2][nsamps2];
254 255 256
#endif
#elif defined(__arm__)
   nsamps2 = (nsamps+3)>>2;
257
   int16x8_t buff_tmp[2][nsamps2];
258 259
#endif

knopp's avatar
 
knopp committed
260

261
  if (device->type == USRP_B200_DEV) {  
262
    if (cc>1) {
gauthier's avatar
gauthier committed
263
    // receive multiple channels (e.g. RF A and RF B)
264
      std::vector<void *> buff_ptrs;
265
 
266 267 268
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff_tmp[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
gauthier's avatar
gauthier committed
269
    // receive a single channel (e.g. from connector RF A)
270 271
      samples_received = s->rx_stream->recv(buff_tmp[0], nsamps, s->rx_md);
    }
272

273
  // bring RX data into 12 LSBs for softmodem RX
274 275
    for (int i=0;i<cc;i++) {
      for (int j=0; j<nsamps2; j++) {      
276 277
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
278
        ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
279
#else
280
        ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
281 282
#endif
#elif defined(__arm__)
283
        ((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
284
#endif
285
      }
286
    }
287
  } else if (device->type == USRP_X300_DEV) {
288
    if (cc>1) { 
289 290 291 292 293 294 295 296
    // receive multiple channels (e.g. RF A and RF B)
      std::vector<void *> buff_ptrs;
 
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
    // receive a single channel (e.g. from connector RF A)
      samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
navid's avatar
navid committed
297
    }
298
  }
299

knopp's avatar
 
knopp committed
300 301 302 303
  if (samples_received < nsamps) {
    printf("[recv] received %d samples out of %d\n",samples_received,nsamps);
    
  }
navid's avatar
navid committed
304

knopp's avatar
 
knopp committed
305 306 307 308 309 310 311 312 313 314 315 316 317 318 319
  //handle the error code
  switch(s->rx_md.error_code){
  case uhd::rx_metadata_t::ERROR_CODE_NONE:
    break;
  case uhd::rx_metadata_t::ERROR_CODE_OVERFLOW:
    printf("[recv] USRP RX OVERFLOW!\n");
    s->num_overflows++;
    break;
  case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT:
    printf("[recv] USRP RX TIMEOUT!\n");
    break;
  default:
    printf("[recv] Unexpected error on RX, Error code: 0x%x\n",s->rx_md.error_code);
    break;
  }
knopp's avatar
 
knopp committed
320 321 322
  s->rx_count += nsamps;
  s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
  *ptimestamp = s->rx_timestamp;
navid's avatar
navid committed
323

Rohit Gupta's avatar
Rohit Gupta committed
324 325 326 327 328 329 330 331 332 333
  clock_gettime(CLOCK_MONOTONIC_RAW, &tp_end);
  time_diff = (tp_end.tv_sec - tp_start.tv_sec) *1E09  + (tp_end.tv_nsec - tp_start.tv_nsec);
  if  (time_min==0 ||loop==1 || time_min > time_diff)
    time_min=time_diff;
  if  (time_max==0 ||loop==1 || time_max < time_diff)
    time_max=time_diff;
  if (time_avg ==0 ||loop==1)
    time_avg= time_diff;
  else
    time_avg=(time_diff+time_avg) /2.0;
334
  /*
Rohit Gupta's avatar
Rohit Gupta committed
335 336 337 338
  //prints statics of uhd every 10 seconds
  if ( loop % (10 * ((int)device->openair0_cfg[0].sample_rate /(int)nsamps )) ==0)
     LOG_I(HW,"usrp_read: min(ns)=%d, max(ns)=%d, avg(ns)=%d\n", (int)time_min, (int)time_max,(int)time_avg);

339
     loop++;*/
Rohit Gupta's avatar
Rohit Gupta committed
340
  return samples_received;
knopp's avatar
 
knopp committed
341 342
}

343 344 345
/*! \brief Get current timestamp of USRP
 * \param device the hardware to use
*/
knopp's avatar
 
knopp committed
346 347 348 349 350 351 352 353
openair0_timestamp get_usrp_time(openair0_device *device) 
{
 
  usrp_state_t *s = (usrp_state_t*)device->priv;
  
  return s->usrp->get_time_now().to_ticks(s->sample_rate);
} 

354 355 356 357
/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
knopp's avatar
 
knopp committed
358 359 360 361
static bool is_equal(double a, double b)
{
  return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
}
knopp's avatar
 
knopp committed
362

363 364 365 366 367 368 369 370 371
void *freq_thread(void *arg) {
  
  openair0_device *device=(openair0_device *)arg;
  usrp_state_t *s = (usrp_state_t*)device->priv;
  
  s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
  s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
}
/*! \brief Set frequencies (TX/RX). Spawns a thread to handle the frequency change to not block the calling thread
372 373 374 375 376
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
 * \returns 0 in success 
 */
377
int trx_usrp_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, int dummy) {
knopp's avatar
 
knopp committed
378 379

  usrp_state_t *s = (usrp_state_t*)device->priv;
380
  pthread_t f_thread;
knopp's avatar
 
knopp committed
381

382
  printf("Setting USRP TX Freq %f, RX Freq %f\n",openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0]);
383 384 385

  // spawn a thread to handle the frequency change to not block the calling thread
  pthread_create(&f_thread,NULL,freq_thread,(void*)device);
knopp's avatar
 
knopp committed
386 387 388 389 390

  return(0);
  
}

391 392 393 394 395
/*! \brief Set RX frequencies 
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
knopp's avatar
 
knopp committed
396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) {

  usrp_state_t *s = (usrp_state_t*)device->priv;
  static int first_call=1;
  static double rf_freq,diff;

  uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);

  rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
  rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
  rf_freq=openair0_cfg[0].rx_freq[0];
  s->usrp->set_rx_freq(rx_tune_req);

  return(0);
  
}

413 414 415 416 417
/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
418
int trx_usrp_set_gains(openair0_device* device, 
419
		       openair0_config_t *openair0_cfg) {
knopp's avatar
 
knopp committed
420 421 422 423

  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[0]);
424 425 426 427 428 429 430 431 432
  ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);
  // limit to maximum gain
  if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
    
    printf("RX Gain 0 too high, reduce by %f dB\n",
	   openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());	   
    exit(-1);
  }
  s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
433
  printf("Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n", openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],openair0_cfg[0].rx_gain[0],gain_range.stop());
434

knopp's avatar
 
knopp committed
435 436
  return(0);
}
437

438 439 440
/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
441
int trx_usrp_stop(openair0_device* device) {
442 443
  return(0);
}
444

445
/*! \brief USRPB210 RX calibration table */
446
rx_gain_calib_table_t calib_table_b210[] = {
Raymond Knopp's avatar
Raymond Knopp committed
447 448 449 450 451
  {3500000000.0,44.0},
  {2660000000.0,49.0},
  {2300000000.0,50.0},
  {1880000000.0,53.0},
  {816000000.0,58.0},
452 453
  {-1,0}};

454
/*! \brief USRPB210 RX calibration table */
455 456 457 458 459 460
rx_gain_calib_table_t calib_table_b210_38[] = {
  {3500000000.0,44.0},
  {2660000000.0,49.8},
  {2300000000.0,51.0},
  {1880000000.0,53.0},
  {816000000.0,57.0},
461 462
  {-1,0}};

463
/*! \brief USRPx310 RX calibration table */
464 465
rx_gain_calib_table_t calib_table_x310[] = {
  {3500000000.0,77.0},
466
  {2660000000.0,81.0},
467 468
  {2300000000.0,81.0},
  {1880000000.0,82.0},
469
  {816000000.0,85.0},
470 471
  {-1,0}};

472 473 474 475 476
/*! \brief Set RX gain offset 
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
 * \returns 0 in success 
 */
477
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {
478 479 480

  int i=0;
  // loop through calibration table to find best adjustment factor for RX frequency
481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506
  double min_diff = 6e9,diff,gain_adj=0.0;
  if (bw_gain_adjust==1) {
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:      
      break;
    case 23040000:
      gain_adj=1.25;
      break;
    case 15360000:
      gain_adj=3.0;
      break;
    case 7680000:
      gain_adj=6.0;
      break;
    case 3840000:
      gain_adj=9.0;
      break;
    case 1920000:
      gain_adj=12.0;
      break;
    default:
      printf("unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
507 508
  while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
    diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
509
    printf("cal %d: freq %f, offset %f, diff %f\n",
510 511 512
	   i,
	   openair0_cfg->rx_gain_calib_table[i].freq,
	   openair0_cfg->rx_gain_calib_table[i].offset,diff);
513 514
    if (min_diff > diff) {
      min_diff = diff;
515
      openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
516 517 518 519 520 521
    }
    i++;
  }
  
}

522 523 524 525
/*! \brief print the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
526
int trx_usrp_get_stats(openair0_device* device) {
527

528 529 530
  return(0);

}
531 532 533 534 535

/*! \brief Reset the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
536
int trx_usrp_reset_stats(openair0_device* device) {
537 538 539 540

  return(0);

}
541

542

543

544
extern "C" {
545 546 547 548
/*! \brief Initialize Openair USRP target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
549
  int device_init(openair0_device* device, openair0_config_t *openair0_cfg) {
550
    
551 552 553 554 555
    uhd::set_thread_priority_safe(1.0);
    usrp_state_t *s = (usrp_state_t*)malloc(sizeof(usrp_state_t));
    memset(s, 0, sizeof(usrp_state_t));
    
    // Initialize USRP device
knopp's avatar
 
knopp committed
556

557
  device->openair0_cfg = openair0_cfg;
knopp's avatar
 
knopp committed
558

knopp's avatar
 
knopp committed
559
  std::string args = "type=b200";
knopp's avatar
knopp committed
560 561


knopp's avatar
 
knopp committed
562
  uhd::device_addrs_t device_adds = uhd::device::find(args);
knopp's avatar
 
knopp committed
563
  size_t i;
564 565 566 567 568
  
  int vers=0,subvers=0,subsubvers=0;
  int bw_gain_adjust=0;

  sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
knopp's avatar
 
knopp committed
569

570
  printf("Checking for USRPs : UHD %s (%d.%d.%d)\n",uhd::get_version_string().c_str(),vers,subvers,subsubvers);
571
  
knopp's avatar
 
knopp committed
572 573
  if(device_adds.size() == 0)
  {
574 575 576 577 578 579 580
    double usrp_master_clock = 184.32e6;

    std::string args = "type=x300";
    
    // workaround for an api problem, master clock has to be set with the constructor not via set_master_clock_rate
    args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
    
knopp's avatar
knopp committed
581
//    args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=4096, recv_frame_size=4096";
582
    
583
    uhd::device_addrs_t device_adds = uhd::device::find(args);
knopp's avatar
 
knopp committed
584

585 586 587 588 589
    if(device_adds.size() == 0)
    {
      std::cerr<<"No USRP Device Found. " << std::endl;
      free(s);
      return -1;
knopp's avatar
knopp committed
590

591
    }
knopp's avatar
knopp committed
592

593

594 595 596 597 598 599
    printf("Found USRP X300\n");
    s->usrp = uhd::usrp::multi_usrp::make(args);
    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);

    // lock mboard clocks
600 601 602 603
    if (openair0_cfg[0].clock_source == internal)
      s->usrp->set_clock_source("internal");
    else
      s->usrp->set_clock_source("external");
604
    
605
    //Setting device type to USRP X300/X310 
606
    device->type=USRP_X300_DEV;
607

608 609 610
    // this is not working yet, master clock has to be set via constructor
    // set master clock rate and sample rate for tx & rx for streaming
    //s->usrp->set_master_clock_rate(usrp_master_clock);
611 612

    openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
613
    
614 615
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
616
            // from usrp_time_offset
617
      //openair0_cfg[0].samples_per_packet    = 2048;
618
      openair0_cfg[0].tx_sample_advance     = 15;
619 620
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
621
      break;
622
    case 15360000:
623
      //openair0_cfg[0].samples_per_packet    = 2048;
624
      openair0_cfg[0].tx_sample_advance     = 45;
625 626
      openair0_cfg[0].tx_bw                 = 10e6;
      openair0_cfg[0].rx_bw                 = 10e6;
627
      break;
628
    case 7680000:
629
      //openair0_cfg[0].samples_per_packet    = 2048;
630
      openair0_cfg[0].tx_sample_advance     = 50;
631 632
      openair0_cfg[0].tx_bw                 = 5e6;
      openair0_cfg[0].rx_bw                 = 5e6;
633
      break;
634
    case 1920000:
635
      //openair0_cfg[0].samples_per_packet    = 2048;
636
      openair0_cfg[0].tx_sample_advance     = 50;
637 638
      openair0_cfg[0].tx_bw                 = 1.25e6;
      openair0_cfg[0].rx_bw                 = 1.25e6;
639 640 641 642 643 644 645
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }

646 647
  } else {
    printf("Found USRP B200");
648
    args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=15360, recv_frame_size=15360" ; 
649 650 651 652
    s->usrp = uhd::usrp::multi_usrp::make(args);

    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);
653 654 655 656
    
    // do not explicitly set the clock to "internal", because this will disable the gpsdo
    //    // lock mboard clocks
    //    s->usrp->set_clock_source("internal");
657
    // set master clock rate and sample rate for tx & rx for streaming
658

659 660 661 662 663 664
    // lock mboard clocks
    if (openair0_cfg[0].clock_source == internal)
      s->usrp->set_clock_source("internal");
    else
      s->usrp->set_clock_source("external");

665
    device->type = USRP_B200_DEV;
666

knopp's avatar
knopp committed
667

668 669 670 671 672 673 674 675
    if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
      bw_gain_adjust=0;
    }
    else {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
      bw_gain_adjust=1;
    }
676

677 678
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
679
      s->usrp->set_master_clock_rate(30.72e6);
680
      //openair0_cfg[0].samples_per_packet    = 1024;
681
      openair0_cfg[0].tx_sample_advance     = 115;
682 683
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
684
      break;
685
    case 23040000:
686
      s->usrp->set_master_clock_rate(23.04e6); //to be checked
687
      //openair0_cfg[0].samples_per_packet    = 1024;
688
      openair0_cfg[0].tx_sample_advance     = 113;
689 690
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
691
      break;
692
    case 15360000:
693
      s->usrp->set_master_clock_rate(30.72e06);
694
      //openair0_cfg[0].samples_per_packet    = 1024;
695
      openair0_cfg[0].tx_sample_advance     = 103; 
696 697
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
698
      break;
699
    case 7680000:
Rohit Gupta's avatar
Rohit Gupta committed
700
      s->usrp->set_master_clock_rate(30.72e6);
701
      //openair0_cfg[0].samples_per_packet    = 1024;
702
      openair0_cfg[0].tx_sample_advance     = 80;
703 704
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
705
      break;
706
    case 1920000:
707
      s->usrp->set_master_clock_rate(30.72e6);
708
      //openair0_cfg[0].samples_per_packet    = 1024;
709
      openair0_cfg[0].tx_sample_advance     = 40;
710 711
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
712 713 714 715 716 717 718
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
knopp's avatar
knopp committed
719

720
  /* device specific */
721 722
  //openair0_cfg[0].txlaunch_wait = 1;//manage when TX processing is triggered
  //openair0_cfg[0].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
723 724
  openair0_cfg[0].iq_txshift = 4;//shift
  openair0_cfg[0].iq_rxrescale = 15;//rescale iqs
725
  
knopp's avatar
 
knopp committed
726
  for(i=0;i<s->usrp->get_rx_num_channels();i++) {
knopp's avatar
 
knopp committed
727
    if (i<openair0_cfg[0].rx_num_channels) {
knopp's avatar
knopp committed
728
      s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
729 730
      //s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
      //printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
knopp's avatar
knopp committed
731
      s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
732
      set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
733 734 735 736 737 738 739 740 741 742 743 744

      ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
      // limit to maximum gain
      if (openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] > gain_range.stop()) {
	
        printf("RX Gain %lu too high, lower by %f dB\n",i,openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop());
	exit(-1);
      }
      s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i);
      printf("RX Gain %lu %f (%f) => %f (max %f)\n",i,
	     openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
	     openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
knopp's avatar
 
knopp committed
745 746
    }
  }
knopp's avatar
 
knopp committed
747
  for(i=0;i<s->usrp->get_tx_num_channels();i++) {
knopp's avatar
 
knopp committed
748
    if (i<openair0_cfg[0].tx_num_channels) {
knopp's avatar
knopp committed
749
      s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
750 751
      //s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
      //printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
knopp's avatar
knopp committed
752 753
      s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
      s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
knopp's avatar
 
knopp committed
754 755
    }
  }
knopp's avatar
knopp committed
756 757


knopp's avatar
 
knopp committed
758 759
  // display USRP settings
  std::cout << boost::format("Actual master clock: %fMHz...") % (s->usrp->get_master_clock_rate()/1e6) << std::endl;
760 761
  
  sleep(1);
knopp's avatar
 
knopp committed
762 763

  // create tx & rx streamer
knopp's avatar
 
knopp committed
764
  uhd::stream_args_t stream_args_rx("sc16", "sc16");
knopp's avatar
 
knopp committed
765
  //stream_args_rx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].rx_num_channels*openair0_cfg[0].samples_per_packet));
knopp's avatar
 
knopp committed
766
  for (i = 0; i<openair0_cfg[0].rx_num_channels; i++)
knopp's avatar
 
knopp committed
767 768 769 770 771 772 773
    stream_args_rx.channels.push_back(i);
  s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
  std::cout << boost::format("rx_max_num_samps %u") % (s->rx_stream->get_max_num_samps()) << std::endl;
  //openair0_cfg[0].samples_per_packet = s->rx_stream->get_max_num_samps();

  uhd::stream_args_t stream_args_tx("sc16", "sc16");
  //stream_args_tx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].tx_num_channels*openair0_cfg[0].samples_per_packet));
knopp's avatar
 
knopp committed
774
  for (i = 0; i<openair0_cfg[0].tx_num_channels; i++)
knopp's avatar
 
knopp committed
775 776
      stream_args_tx.channels.push_back(i);
  s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);
knopp's avatar
 
knopp committed
777 778
  std::cout << boost::format("tx_max_num_samps %u") % (s->tx_stream->get_max_num_samps()) << std::endl;

knopp's avatar
 
knopp committed
779

780 781 782 783 784
 /* Setting TX/RX BW after streamers are created due to USRP calibration issue */
  for(i=0;i<s->usrp->get_tx_num_channels();i++) {
    if (i<openair0_cfg[0].tx_num_channels) {
      s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
      printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
Rohit Gupta's avatar
Rohit Gupta committed
785 786 787 788 789
    }
  }
  for(i=0;i<s->usrp->get_rx_num_channels();i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
      s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
790 791 792 793
      printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
    }
  }

knopp's avatar
 
knopp committed
794
  s->usrp->set_time_now(uhd::time_spec_t(0.0));
795
 
796

knopp's avatar
knopp committed
797 798
  for (i=0;i<openair0_cfg[0].rx_num_channels;i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
knopp's avatar
 
knopp committed
799
      printf("RX Channel %lu\n",i);
knopp's avatar
knopp committed
800 801 802 803 804 805 806 807 808 809 810
      std::cout << boost::format("Actual RX sample rate: %fMSps...") % (s->usrp->get_rx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX frequency: %fGHz...") % (s->usrp->get_rx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual RX gain: %f...") % (s->usrp->get_rx_gain(i)) << std::endl;
      std::cout << boost::format("Actual RX bandwidth: %fM...") % (s->usrp->get_rx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX antenna: %s...") % (s->usrp->get_rx_antenna(i)) << std::endl;
    }
  }

  for (i=0;i<openair0_cfg[0].tx_num_channels;i++) {

    if (i<openair0_cfg[0].tx_num_channels) { 
knopp's avatar
 
knopp committed
811
      printf("TX Channel %lu\n",i);
knopp's avatar
knopp committed
812 813 814 815 816 817 818 819
      std::cout << std::endl<<boost::format("Actual TX sample rate: %fMSps...") % (s->usrp->get_tx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX frequency: %fGHz...") % (s->usrp->get_tx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual TX gain: %f...") % (s->usrp->get_tx_gain(i)) << std::endl;
      std::cout << boost::format("Actual TX bandwidth: %fM...") % (s->usrp->get_tx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX antenna: %s...") % (s->usrp->get_tx_antenna(i)) << std::endl;
    }
  }

knopp's avatar
 
knopp committed
820
  std::cout << boost::format("Device timestamp: %f...") % (s->usrp->get_time_now().get_real_secs()) << std::endl;
knopp's avatar
 
knopp committed
821 822 823 824

  device->priv = s;
  device->trx_start_func = trx_usrp_start;
  device->trx_write_func = trx_usrp_write;
825 826 827 828 829 830 831
  device->trx_read_func  = trx_usrp_read;
  device->trx_get_stats_func = trx_usrp_get_stats;
  device->trx_reset_stats_func = trx_usrp_reset_stats;
  device->trx_end_func   = trx_usrp_end;
  device->trx_stop_func  = trx_usrp_stop;
  device->trx_set_freq_func = trx_usrp_set_freq;
  device->trx_set_gains_func   = trx_usrp_set_gains;
832 833
  device->openair0_cfg = openair0_cfg;

knopp's avatar
knopp committed
834
  s->sample_rate = openair0_cfg[0].sample_rate;
knopp's avatar
 
knopp committed
835 836 837 838 839 840 841 842 843
  // TODO:
  // init tx_forward_nsamps based usrp_time_offset ex
  if(is_equal(s->sample_rate, (double)30.72e6))
    s->tx_forward_nsamps  = 176;
  if(is_equal(s->sample_rate, (double)15.36e6))
    s->tx_forward_nsamps = 90;
  if(is_equal(s->sample_rate, (double)7.68e6))
    s->tx_forward_nsamps = 50;
  return 0;
844
  }
knopp's avatar
 
knopp committed
845
}
846
/*@}*/