usrp_lib.cpp 25.2 KB
Newer Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
/*******************************************************************************
    OpenAirInterface 
    Copyright(c) 1999 - 2014 Eurecom

    OpenAirInterface is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.


    OpenAirInterface is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with OpenAirInterface.The full GNU General Public License is 
    included in this distribution in the file called "COPYING". If not, 
    see <http://www.gnu.org/licenses/>.

   Contact Information
   OpenAirInterface Admin: openair_admin@eurecom.fr
   OpenAirInterface Tech : openair_tech@eurecom.fr
24
   OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
25
  
ghaddab's avatar
ghaddab committed
26
   Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
27
28

 *******************************************************************************/
knopp's avatar
 
knopp committed
29
30
31

/** usrp_lib.cpp
 *
32
 * \author: HongliangXU : hong-liang-xu@agilent.com
knopp's avatar
 
knopp committed
33
34
35
36
37
38
39
40
 */

#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
#include <uhd/utils/thread_priority.hpp>
#include <uhd/usrp/multi_usrp.hpp>
41
#include <uhd/version.hpp>
knopp's avatar
 
knopp committed
42
43
44
45
46
47
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
48

knopp's avatar
   
knopp committed
49
#include "common_lib.h"
50
51
52
53
54
55
56
#ifdef __SSE4_1__
#  include <smmintrin.h>
#endif
 
#ifdef __AVX2__
#  include <immintrin.h>
#endif
57

58
59
60
61
#ifdef __arm__
#  include <arm_neon.h>
#endif

62
63
64
65
66
/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */

/*! \brief USRP Configuration */ 
knopp's avatar
 
knopp committed
67
68
69
70
71
72
typedef struct
{

  // --------------------------------
  // variables for USRP configuration
  // --------------------------------
73
  //! USRP device pointer
knopp's avatar
 
knopp committed
74
75
  uhd::usrp::multi_usrp::sptr usrp;
  //uhd::usrp::multi_usrp::sptr rx_usrp;
76
  
knopp's avatar
 
knopp committed
77
  //create a send streamer and a receive streamer
78
  //! USRP TX Stream
knopp's avatar
 
knopp committed
79
  uhd::tx_streamer::sptr tx_stream;
80
  //! USRP RX Stream
knopp's avatar
 
knopp committed
81
82
  uhd::rx_streamer::sptr rx_stream;

83
  //! USRP TX Metadata
knopp's avatar
 
knopp committed
84
  uhd::tx_metadata_t tx_md;
85
  //! USRP RX Metadata
knopp's avatar
 
knopp committed
86
87
  uhd::rx_metadata_t rx_md;

88
  //! USRP Timestamp Information
knopp's avatar
 
knopp committed
89
  uhd::time_spec_t tm_spec;
90

knopp's avatar
 
knopp committed
91
  //setup variables and allocate buffer
92
  //! USRP Metadata
knopp's avatar
 
knopp committed
93
94
  uhd::async_metadata_t async_md;

95
  //! Sampling rate
knopp's avatar
 
knopp committed
96
  double sample_rate;
97
98

  //! time offset between transmiter timestamp and receiver timestamp;
knopp's avatar
 
knopp committed
99
  double tdiff;
100
101

  //! TX forward samples. We use usrp_time_offset to get this value
knopp's avatar
 
knopp committed
102
103
104
105
106
107
  int tx_forward_nsamps; //166 for 20Mhz


  // --------------------------------
  // Debug and output control
  // --------------------------------
108
  //! Number of underflows
knopp's avatar
 
knopp committed
109
  int num_underflows;
110
  //! Number of overflows
knopp's avatar
 
knopp committed
111
  int num_overflows;
112
113
  
  //! Number of sequential errors
knopp's avatar
 
knopp committed
114
  int num_seq_errors;
115
  //! tx count
knopp's avatar
 
knopp committed
116
  int64_t tx_count;
117
  //! rx count
knopp's avatar
 
knopp committed
118
  int64_t rx_count;
119
  //! timestamp of RX packet
knopp's avatar
 
knopp committed
120
121
122
123
  openair0_timestamp rx_timestamp;

} usrp_state_t;

124
125
126
/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
knopp's avatar
 
knopp committed
127
128
129
130
131
132
static int trx_usrp_start(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  // init recv and send streaming
  uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
knopp's avatar
   
knopp committed
133
  cmd.time_spec = s->usrp->get_time_now() + uhd::time_spec_t(0.05);
knopp's avatar
 
knopp committed
134
135
136
  cmd.stream_now = false; // start at constant delay
  s->rx_stream->issue_stream_cmd(cmd);

knopp's avatar
   
knopp committed
137
  s->tx_md.time_spec = cmd.time_spec + uhd::time_spec_t(1-(double)s->tx_forward_nsamps/s->sample_rate);
knopp's avatar
 
knopp committed
138
139
140
141
142
143
144
145
  s->tx_md.has_time_spec = true;
  s->tx_md.start_of_burst = true;
  s->tx_md.end_of_burst = false;


  s->rx_count = 0;
  s->tx_count = 0;
  s->rx_timestamp = 0;
146
147

  return 0;
knopp's avatar
 
knopp committed
148
}
149
150
151
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources 
 * \param device the hardware to use
 */
knopp's avatar
 
knopp committed
152
153
154
155
156
157
static void trx_usrp_end(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->rx_stream->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);

navid's avatar
navid committed
158
159
160
161
162
  //send a mini EOB packet
  s->tx_md.end_of_burst = true;
  s->tx_stream->send("", 0, s->tx_md);
  s->tx_md.end_of_burst = false;
  
knopp's avatar
 
knopp committed
163
}
164

165
166
167
168
169
170
171
172
/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
      @param timestamp The timestamp at whicch the first sample MUST be sent 
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
      @param antenna_id index of the antenna if the device has multiple anteannas
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
*/ 
173
static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags)
knopp's avatar
 
knopp committed
174
{
175
  int ret;
knopp's avatar
 
knopp committed
176
  usrp_state_t *s = (usrp_state_t*)device->priv;
knopp's avatar
knopp committed
177

178
  s->tx_md.time_spec = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
knopp's avatar
knopp committed
179

180
  
knopp's avatar
 
knopp committed
181
182
183
184
  if(flags)
    s->tx_md.has_time_spec = true;
  else
    s->tx_md.has_time_spec = false;
185
  
knopp's avatar
knopp committed
186
187
188
  if (cc>1) {
    std::vector<void *> buff_ptrs;
    for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
189
    ret = (int)s->tx_stream->send(buff_ptrs, nsamps, s->tx_md,1e-3);
knopp's avatar
knopp committed
190
191
  }
  else
192
193
    ret = (int)s->tx_stream->send(buff[0], nsamps, s->tx_md,1e-3);

knopp's avatar
 
knopp committed
194
  s->tx_md.start_of_burst = false;
195

196
197
198
199
200
  if (ret != nsamps) {
    printf("[xmit] tx samples %d != %d\n",ret,nsamps);
  }
      
  return ret;
knopp's avatar
 
knopp committed
201
202
}

203
204
205
206
207
208
209
210
211
212
213
/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
knopp's avatar
   
knopp committed
214
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc)
knopp's avatar
 
knopp committed
215
{
216
217
218
219
220
221
   usrp_state_t *s = (usrp_state_t*)device->priv;
   int samples_received=0,i,j;
   int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
   nsamps2 = (nsamps+7)>>3;
222
   __m256i buff_tmp[2][nsamps2];
223
224
#else
   nsamps2 = (nsamps+3)>>2;
225
   __m128i buff_tmp[2][nsamps2];
226
227
228
#endif
#elif defined(__arm__)
   nsamps2 = (nsamps+3)>>2;
229
   int16x8_t buff_tmp[2][nsamps2];
230
231
#endif

knopp's avatar
 
knopp committed
232

233
  if (device->type == USRP_B200_DEV) {  
234
    if (cc>1) {
gauthier's avatar
gauthier committed
235
    // receive multiple channels (e.g. RF A and RF B)
236
      std::vector<void *> buff_ptrs;
237
 
238
239
240
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff_tmp[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
gauthier's avatar
gauthier committed
241
    // receive a single channel (e.g. from connector RF A)
242
243
      samples_received = s->rx_stream->recv(buff_tmp[0], nsamps, s->rx_md);
    }
244

245
  // bring RX data into 12 LSBs for softmodem RX
246
247
    for (int i=0;i<cc;i++) {
      for (int j=0; j<nsamps2; j++) {      
248
249
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
250
        ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
251
#else
252
        ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
253
254
#endif
#elif defined(__arm__)
255
        ((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
256
#endif
257
      }
258
    }
259
  } else if (device->type == USRP_X300_DEV) {
260
    if (cc>1) { 
261
262
263
264
265
266
267
268
    // receive multiple channels (e.g. RF A and RF B)
      std::vector<void *> buff_ptrs;
 
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
    // receive a single channel (e.g. from connector RF A)
      samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
navid's avatar
navid committed
269
    }
270
  }
271

knopp's avatar
   
knopp committed
272
273
274
275
  if (samples_received < nsamps) {
    printf("[recv] received %d samples out of %d\n",samples_received,nsamps);
    
  }
navid's avatar
navid committed
276

knopp's avatar
   
knopp committed
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
  //handle the error code
  switch(s->rx_md.error_code){
  case uhd::rx_metadata_t::ERROR_CODE_NONE:
    break;
  case uhd::rx_metadata_t::ERROR_CODE_OVERFLOW:
    printf("[recv] USRP RX OVERFLOW!\n");
    s->num_overflows++;
    break;
  case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT:
    printf("[recv] USRP RX TIMEOUT!\n");
    break;
  default:
    printf("[recv] Unexpected error on RX, Error code: 0x%x\n",s->rx_md.error_code);
    break;
  }
knopp's avatar
 
knopp committed
292
293
294
  s->rx_count += nsamps;
  s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
  *ptimestamp = s->rx_timestamp;
navid's avatar
navid committed
295

knopp's avatar
 
knopp committed
296
297
298
  return samples_received;
}

299
300
301
/*! \brief Get current timestamp of USRP
 * \param device the hardware to use
*/
knopp's avatar
   
knopp committed
302
303
304
305
306
307
308
309
openair0_timestamp get_usrp_time(openair0_device *device) 
{
 
  usrp_state_t *s = (usrp_state_t*)device->priv;
  
  return s->usrp->get_time_now().to_ticks(s->sample_rate);
} 

310
311
312
313
/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
knopp's avatar
 
knopp committed
314
315
316
317
static bool is_equal(double a, double b)
{
  return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
}
knopp's avatar
   
knopp committed
318

319
320
321
322
323
324
/*! \brief Set frequencies (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
 * \returns 0 in success 
 */
325
int trx_usrp_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, int dummy) {
knopp's avatar
   
knopp committed
326
327
328

  usrp_state_t *s = (usrp_state_t*)device->priv;

329
  printf("Setting USRP TX Freq %f, RX Freq %f\n",openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0]);
knopp's avatar
   
knopp committed
330
331
332
333
334
335
336
  s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[0]);
  s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[0]);

  return(0);
  
}

337
338
339
340
341
/*! \brief Set RX frequencies 
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
knopp's avatar
   
knopp committed
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) {

  usrp_state_t *s = (usrp_state_t*)device->priv;
  static int first_call=1;
  static double rf_freq,diff;

  uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);

  rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
  rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
  rf_freq=openair0_cfg[0].rx_freq[0];
  s->usrp->set_rx_freq(rx_tune_req);

  return(0);
  
}

359
360
361
362
363
/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
364
int trx_usrp_set_gains(openair0_device* device, 
365
		       openair0_config_t *openair0_cfg) {
knopp's avatar
   
knopp committed
366
367
368
369

  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[0]);
370
371
372
373
374
375
376
377
378
  ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);
  // limit to maximum gain
  if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
    
    printf("RX Gain 0 too high, reduce by %f dB\n",
	   openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());	   
    exit(-1);
  }
  s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
379
  printf("Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n", openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],openair0_cfg[0].rx_gain[0],gain_range.stop());
380

knopp's avatar
   
knopp committed
381
382
  return(0);
}
383

384
385
386
/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
387
int trx_usrp_stop(openair0_device* device) {
388
389
  return(0);
}
390

391
/*! \brief USRPB210 RX calibration table */
392
rx_gain_calib_table_t calib_table_b210[] = {
Raymond Knopp's avatar
Raymond Knopp committed
393
394
395
396
397
  {3500000000.0,44.0},
  {2660000000.0,49.0},
  {2300000000.0,50.0},
  {1880000000.0,53.0},
  {816000000.0,58.0},
398
399
  {-1,0}};

400
/*! \brief USRPB210 RX calibration table */
401
402
403
404
405
406
rx_gain_calib_table_t calib_table_b210_38[] = {
  {3500000000.0,44.0},
  {2660000000.0,49.8},
  {2300000000.0,51.0},
  {1880000000.0,53.0},
  {816000000.0,57.0},
407
408
  {-1,0}};

409
/*! \brief USRPx310 RX calibration table */
410
411
rx_gain_calib_table_t calib_table_x310[] = {
  {3500000000.0,77.0},
412
  {2660000000.0,81.0},
413
414
  {2300000000.0,81.0},
  {1880000000.0,82.0},
415
  {816000000.0,85.0},
416
417
  {-1,0}};

418
419
420
421
422
/*! \brief Set RX gain offset 
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
 * \returns 0 in success 
 */
423
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {
424
425
426

  int i=0;
  // loop through calibration table to find best adjustment factor for RX frequency
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
  double min_diff = 6e9,diff,gain_adj=0.0;
  if (bw_gain_adjust==1) {
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:      
      break;
    case 23040000:
      gain_adj=1.25;
      break;
    case 15360000:
      gain_adj=3.0;
      break;
    case 7680000:
      gain_adj=6.0;
      break;
    case 3840000:
      gain_adj=9.0;
      break;
    case 1920000:
      gain_adj=12.0;
      break;
    default:
      printf("unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
453
454
  while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
    diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
455
    printf("cal %d: freq %f, offset %f, diff %f\n",
456
457
458
	   i,
	   openair0_cfg->rx_gain_calib_table[i].freq,
	   openair0_cfg->rx_gain_calib_table[i].offset,diff);
459
460
    if (min_diff > diff) {
      min_diff = diff;
461
      openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
462
463
464
465
466
467
    }
    i++;
  }
  
}

468
469
470
471
/*! \brief print the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
472
int trx_usrp_get_stats(openair0_device* device) {
473

474
475
476
  return(0);

}
477
478
479
480
481

/*! \brief Reset the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
482
int trx_usrp_reset_stats(openair0_device* device) {
483
484
485
486

  return(0);

}
487

488

489

490
extern "C" {
491
492
493
494
/*! \brief Initialize Openair USRP target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
495
  int device_init(openair0_device* device, openair0_config_t *openair0_cfg) {
496
    
497
498
499
500
501
    uhd::set_thread_priority_safe(1.0);
    usrp_state_t *s = (usrp_state_t*)malloc(sizeof(usrp_state_t));
    memset(s, 0, sizeof(usrp_state_t));
    
    // Initialize USRP device
knopp's avatar
 
knopp committed
502

knopp's avatar
   
knopp committed
503

knopp's avatar
   
knopp committed
504
  std::string args = "type=b200";
knopp's avatar
knopp committed
505
506


knopp's avatar
 
knopp committed
507
  uhd::device_addrs_t device_adds = uhd::device::find(args);
knopp's avatar
   
knopp committed
508
  size_t i;
509
510
511
512
513
  
  int vers=0,subvers=0,subsubvers=0;
  int bw_gain_adjust=0;

  sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
knopp's avatar
   
knopp committed
514

515
  printf("Checking for USRPs : UHD %s (%d.%d.%d)\n",uhd::get_version_string().c_str(),vers,subvers,subsubvers);
516
  
knopp's avatar
 
knopp committed
517
518
  if(device_adds.size() == 0)
  {
519
520
521
522
523
524
525
526
    double usrp_master_clock = 184.32e6;

    std::string args = "type=x300";
    
    // workaround for an api problem, master clock has to be set with the constructor not via set_master_clock_rate
    args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
    
    uhd::device_addrs_t device_adds = uhd::device::find(args);
knopp's avatar
 
knopp committed
527

528
529
530
531
532
    if(device_adds.size() == 0)
    {
      std::cerr<<"No USRP Device Found. " << std::endl;
      free(s);
      return -1;
knopp's avatar
knopp committed
533

534
    }
knopp's avatar
knopp committed
535

536

537
538
539
540
541
542
543
544
    printf("Found USRP X300\n");
    s->usrp = uhd::usrp::multi_usrp::make(args);
    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);

    // lock mboard clocks
    s->usrp->set_clock_source("internal");
    
545
    //Setting device type to USRP X300/X310 
546
    device->type=USRP_X300_DEV;
547

548
549
550
    // this is not working yet, master clock has to be set via constructor
    // set master clock rate and sample rate for tx & rx for streaming
    //s->usrp->set_master_clock_rate(usrp_master_clock);
551
552

    openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
553
    
554
555
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
556
557
558
            // from usrp_time_offset
      openair0_cfg[0].samples_per_packet    = 2048;
      openair0_cfg[0].tx_sample_advance     = 15;
559
560
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
561
      break;
562
    case 15360000:
563
564
      openair0_cfg[0].samples_per_packet    = 2048;
      openair0_cfg[0].tx_sample_advance     = 45;
565
566
      openair0_cfg[0].tx_bw                 = 10e6;
      openair0_cfg[0].rx_bw                 = 10e6;
567
      break;
568
    case 7680000:
569
570
      openair0_cfg[0].samples_per_packet    = 1024;
      openair0_cfg[0].tx_sample_advance     = 50;
571
572
      openair0_cfg[0].tx_bw                 = 5e6;
      openair0_cfg[0].rx_bw                 = 5e6;
573
      break;
574
    case 1920000:
575
576
      openair0_cfg[0].samples_per_packet    = 256;
      openair0_cfg[0].tx_sample_advance     = 50;
577
578
      openair0_cfg[0].tx_bw                 = 1.25e6;
      openair0_cfg[0].rx_bw                 = 1.25e6;
579
580
581
582
583
584
585
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }

586
587
  } else {
    printf("Found USRP B200");
588
    args += ",num_recv_frames=256" ; 
589
590
591
592
    s->usrp = uhd::usrp::multi_usrp::make(args);

    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);
593
594
595
596
    
    // do not explicitly set the clock to "internal", because this will disable the gpsdo
    //    // lock mboard clocks
    //    s->usrp->set_clock_source("internal");
597
    // set master clock rate and sample rate for tx & rx for streaming
598

599
    device->type = USRP_B200_DEV;
600

knopp's avatar
knopp committed
601

602
603
604
605
606
607
608
609
    if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
      bw_gain_adjust=0;
    }
    else {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
      bw_gain_adjust=1;
    }
610

611
612
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
613
      s->usrp->set_master_clock_rate(30.72e6);
614
      openair0_cfg[0].tx_sample_advance     = 115;
615
616
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
617
      break;
618
    case 23040000:
619
      s->usrp->set_master_clock_rate(23.04e6); //to be checked
620
      openair0_cfg[0].tx_sample_advance     = 113;
621
622
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
623
      break;
624
    case 15360000:
625
      s->usrp->set_master_clock_rate(30.72e06);
626
      openair0_cfg[0].tx_sample_advance     = 103; 
627
628
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
629
      break;
630
    case 7680000:
Rohit Gupta's avatar
Rohit Gupta committed
631
      s->usrp->set_master_clock_rate(30.72e6);
632
      openair0_cfg[0].tx_sample_advance     = 80;
633
634
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
635
      break;
636
    case 1920000:
637
      s->usrp->set_master_clock_rate(30.72e6);
638
      openair0_cfg[0].tx_sample_advance     = 40;
639
640
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
641
642
643
644
645
646
647
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
knopp's avatar
knopp committed
648

649
  /* device specific */
650
651
  //openair0_cfg[0].txlaunch_wait = 1;//manage when TX processing is triggered
  //openair0_cfg[0].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
652
653
  openair0_cfg[0].iq_txshift = 4;//shift
  openair0_cfg[0].iq_rxrescale = 15;//rescale iqs
654
  
knopp's avatar
   
knopp committed
655
  for(i=0;i<s->usrp->get_rx_num_channels();i++) {
knopp's avatar
   
knopp committed
656
    if (i<openair0_cfg[0].rx_num_channels) {
knopp's avatar
knopp committed
657
      s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
658
659
      //s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
      //printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
knopp's avatar
knopp committed
660
      s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
661
      set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
662
663
664
665
666
667
668
669
670
671
672
673

      ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
      // limit to maximum gain
      if (openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] > gain_range.stop()) {
	
        printf("RX Gain %lu too high, lower by %f dB\n",i,openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop());
	exit(-1);
      }
      s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i);
      printf("RX Gain %lu %f (%f) => %f (max %f)\n",i,
	     openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
	     openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
knopp's avatar
   
knopp committed
674
675
    }
  }
knopp's avatar
   
knopp committed
676
  for(i=0;i<s->usrp->get_tx_num_channels();i++) {
knopp's avatar
   
knopp committed
677
    if (i<openair0_cfg[0].tx_num_channels) {
knopp's avatar
knopp committed
678
      s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
679
680
      //s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
      //printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
knopp's avatar
knopp committed
681
682
      s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
      s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
knopp's avatar
   
knopp committed
683
684
    }
  }
knopp's avatar
knopp committed
685
686


knopp's avatar
   
knopp committed
687
688
  // display USRP settings
  std::cout << boost::format("Actual master clock: %fMHz...") % (s->usrp->get_master_clock_rate()/1e6) << std::endl;
689
690
  
  sleep(1);
knopp's avatar
 
knopp committed
691
692

  // create tx & rx streamer
knopp's avatar
   
knopp committed
693
  uhd::stream_args_t stream_args_rx("sc16", "sc16");
knopp's avatar
   
knopp committed
694
  //stream_args_rx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].rx_num_channels*openair0_cfg[0].samples_per_packet));
knopp's avatar
   
knopp committed
695
  for (i = 0; i<openair0_cfg[0].rx_num_channels; i++)
knopp's avatar
   
knopp committed
696
697
698
699
700
701
702
    stream_args_rx.channels.push_back(i);
  s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
  std::cout << boost::format("rx_max_num_samps %u") % (s->rx_stream->get_max_num_samps()) << std::endl;
  //openair0_cfg[0].samples_per_packet = s->rx_stream->get_max_num_samps();

  uhd::stream_args_t stream_args_tx("sc16", "sc16");
  //stream_args_tx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].tx_num_channels*openair0_cfg[0].samples_per_packet));
knopp's avatar
   
knopp committed
703
  for (i = 0; i<openair0_cfg[0].tx_num_channels; i++)
knopp's avatar
   
knopp committed
704
705
      stream_args_tx.channels.push_back(i);
  s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);
knopp's avatar
   
knopp committed
706
707
  std::cout << boost::format("tx_max_num_samps %u") % (s->tx_stream->get_max_num_samps()) << std::endl;

knopp's avatar
 
knopp committed
708

709
710
711
712
713
 /* Setting TX/RX BW after streamers are created due to USRP calibration issue */
  for(i=0;i<s->usrp->get_tx_num_channels();i++) {
    if (i<openair0_cfg[0].tx_num_channels) {
      s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
      printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
Rohit Gupta's avatar
Rohit Gupta committed
714
715
716
717
718
    }
  }
  for(i=0;i<s->usrp->get_rx_num_channels();i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
      s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
719
720
721
722
      printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
    }
  }

knopp's avatar
 
knopp committed
723
  s->usrp->set_time_now(uhd::time_spec_t(0.0));
724
 
725

knopp's avatar
knopp committed
726
727
  for (i=0;i<openair0_cfg[0].rx_num_channels;i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
knopp's avatar
   
knopp committed
728
      printf("RX Channel %lu\n",i);
knopp's avatar
knopp committed
729
730
731
732
733
734
735
736
737
738
739
      std::cout << boost::format("Actual RX sample rate: %fMSps...") % (s->usrp->get_rx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX frequency: %fGHz...") % (s->usrp->get_rx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual RX gain: %f...") % (s->usrp->get_rx_gain(i)) << std::endl;
      std::cout << boost::format("Actual RX bandwidth: %fM...") % (s->usrp->get_rx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX antenna: %s...") % (s->usrp->get_rx_antenna(i)) << std::endl;
    }
  }

  for (i=0;i<openair0_cfg[0].tx_num_channels;i++) {

    if (i<openair0_cfg[0].tx_num_channels) { 
knopp's avatar
   
knopp committed
740
      printf("TX Channel %lu\n",i);
knopp's avatar
knopp committed
741
742
743
744
745
746
747
748
      std::cout << std::endl<<boost::format("Actual TX sample rate: %fMSps...") % (s->usrp->get_tx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX frequency: %fGHz...") % (s->usrp->get_tx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual TX gain: %f...") % (s->usrp->get_tx_gain(i)) << std::endl;
      std::cout << boost::format("Actual TX bandwidth: %fM...") % (s->usrp->get_tx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX antenna: %s...") % (s->usrp->get_tx_antenna(i)) << std::endl;
    }
  }

knopp's avatar
   
knopp committed
749
  std::cout << boost::format("Device timestamp: %f...") % (s->usrp->get_time_now().get_real_secs()) << std::endl;
knopp's avatar
 
knopp committed
750
751
752
753

  device->priv = s;
  device->trx_start_func = trx_usrp_start;
  device->trx_write_func = trx_usrp_write;
754
755
756
757
758
759
760
  device->trx_read_func  = trx_usrp_read;
  device->trx_get_stats_func = trx_usrp_get_stats;
  device->trx_reset_stats_func = trx_usrp_reset_stats;
  device->trx_end_func   = trx_usrp_end;
  device->trx_stop_func  = trx_usrp_stop;
  device->trx_set_freq_func = trx_usrp_set_freq;
  device->trx_set_gains_func   = trx_usrp_set_gains;
761
  
knopp's avatar
knopp committed
762
  s->sample_rate = openair0_cfg[0].sample_rate;
knopp's avatar
 
knopp committed
763
764
765
766
767
768
769
770
771
  // TODO:
  // init tx_forward_nsamps based usrp_time_offset ex
  if(is_equal(s->sample_rate, (double)30.72e6))
    s->tx_forward_nsamps  = 176;
  if(is_equal(s->sample_rate, (double)15.36e6))
    s->tx_forward_nsamps = 90;
  if(is_equal(s->sample_rate, (double)7.68e6))
    s->tx_forward_nsamps = 50;
  return 0;
772
  }
knopp's avatar
 
knopp committed
773
}
774
/*@}*/