build_helper 20.2 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements.  See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# *      http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# *      contact@openairinterface.org
# */

22
# file build_helper
thomasl's avatar
thomasl committed
23
# brief
24
# authors Laurent Thomas, Lionel GAUTHIER
thomasl's avatar
thomasl committed
25 26
#
#######################################
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
if [ ! -f /etc/os-release ]; then
  echo "No /etc/os-release file found. You're likely on an unsupported distro."
  exit -1
fi
OS_DISTRO=$(grep "^ID=" /etc/os-release | sed "s/ID=//" | sed "s/\"//g")
OS_RELEASE=$(grep "^VERSION_ID=" /etc/os-release | sed "s/VERSION_ID=//" | sed "s/\"//g")
case "$OS_DISTRO" in
  fedora) OS_BASEDISTRO="fedora"; INSTALLER="dnf"; CMAKE_CMD="cmake" ;;
  rhel)   OS_BASEDISTRO="fedora"; INSTALLER="yum"; CMAKE_CMD="cmake3" ;;
  centos) OS_BASEDISTRO="fedora"; INSTALLER="yum"; CMAKE_CMD="cmake3" ;;
  debian) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE_CMD="cmake" ;;
  ubuntu) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE_CMD="cmake" ;;
esac
KERNEL_VERSION=$(uname -r | cut -d '.' -f1)
KERNEL_MAJOR=$(uname -r | cut -d '.' -f2)

43
SUDO='sudo -E'
thomasl's avatar
thomasl committed
44

45 46 47 48 49 50 51
###############################
## echo and  family
###############################
black='\E[30m'
red='\E[31m'
green='\E[32m'
yellow='\E[33m'
52
blue='\E[1;34m'
53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76
magenta='\E[35m'
cyan='\E[36m'
white='\E[37m'
reset_color='\E[00m'
COLORIZE=1

cecho()  {  
    # Color-echo
    # arg1 = message
    # arg2 = color
    local default_msg="No Message."
    message=${1:-$default_msg}
    color=${2:-$green}
    [ "$COLORIZE" = "1" ] && message="$color$message$reset_color"
    echo -e "$message"
    return
}

echo_error()   { cecho "$*" $red          ;}
echo_fatal()   { cecho "$*" $red; exit -1 ;}
echo_warning() { cecho "$*" $yellow       ;}
echo_success() { cecho "$*" $green        ;}
echo_info()    { cecho "$*" $blue         ;}

77 78 79
########################
# distribution helpers #
########################
80

81 82 83 84 85 86 87
# This function return a string to identify the distribution we are running
# If we can't check the distribution, it returns "Unknown"
# This function return always true as exit code by design
# Examples:
#   Ubuntu16.04
#   Debian8.5
get_distribution_release() {
88 89
    if [[ ! -z "$OS_DISTRO$OS_RELEASE" ]]; then
        echo "$OS_DISTRO$OS_RELEASE"
90 91 92 93
    else
        echo Unknown
    fi
}
94

95 96 97
check_supported_distribution() {
    local distribution=$(get_distribution_release)
    case "$distribution" in
98 99 100 101 102
        "ubuntu16.04") return 0 ;;
        "ubuntu14.04") return 0 ;;
        "fedora24")    return 0 ;;
        "rhel7")       return 0 ;;
        "centos7")     return 0 ;;
103 104 105
    esac
    return 1
}
106

107 108 109 110 111 112 113 114 115 116 117
##################
# Error handlers #
##################

handler_EXIT() {
	local exit_code=$?
    [ "$exit_code" -eq 0 ] || echo_error "build have failed"
	exit $exit_code
}

trap handler_EXIT EXIT
118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144

###########################
# Cleaners
###########################

clean_kernel() {
    $SUDO modprobe ip_tables
    $SUDO modprobe x_tables
    $SUDO iptables -P INPUT ACCEPT
    $SUDO iptables -F INPUT
    $SUDO iptables -P OUTPUT ACCEPT
    $SUDO iptables -F OUTPUT
    $SUDO iptables -P FORWARD ACCEPT
    $SUDO iptables -F FORWARD
    $SUDO iptables -t nat -F
    $SUDO iptables -t mangle -F
    $SUDO iptables -t filter -F
    $SUDO iptables -t raw -F
    echo_info "Flushed iptables"
    $SUDO rmmod nasmesh > /dev/null 2>&1
    $SUDO rmmod oai_nw_drv  > /dev/null 2>&1
    $SUDO rmmod openair_rf > /dev/null 2>&1
    $SUDO rmmod ue_ip > /dev/null 2>&1
    echo_info "removed drivers from kernel"
}

clean_all_files() {
145
 set_openair_env
146
 dir=$OPENAIR_DIR/cmake_targets
147
 rm -rf $dir/log $OPENAIR_DIR/targets/bin/* 
148 149 150
 rm -rf $dir/lte_build_oai $dir/lte-simulators/build
 rm -rf $dir/oaisim_build_oai/build $dir/oaisim_build_oai/CMakeLists.txt
 rm -rf $dir/autotests/bin $dir/autotests/log $dir/autotests/*/build 
151 152 153 154 155 156
}

###################################
# Compilers
###################################

157 158 159 160 161 162 163 164 165 166 167 168 169 170
#check_warnings:
#    print error message if the compilation had warnings
#argument:
#    $1: log file
check_warnings() {
  #we look for 'warning:' in the compilation log file
  #this is how gcc starts a warning
  #this is not perfect, we may get false positive
  warning_count=`grep "warning:" "$1"|wc -l`
  if [ $warning_count -gt 0 ]; then
    echo_error "WARNING: $warning_count warnings. See $1"
  fi
}

thomasl's avatar
thomasl committed
171
compilations() {
thomasl's avatar
thomasl committed
172
  cd $OPENAIR_DIR/cmake_targets/$1/build
173
  set +e
thomasl's avatar
thomasl committed
174 175
  {
    rm -f $3
176 177 178 179 180 181
    if [ "$VERBOSE_COMPILE" == "1" ]; then
       make -j`nproc` $2 VERBOSE=$VERBOSE_COMPILE
    else
       make -j`nproc` $2
    fi

thomasl's avatar
thomasl committed
182
  } > $dlog/$2.$REL.txt 2>&1
183
  set -e
184
  echo_info "Log file for compilation has been written to: $dlog/$2.$REL.txt"
thomasl's avatar
thomasl committed
185
  if [ -s $3 ] ; then
186
     cp $3 $4
thomasl's avatar
thomasl committed
187
     echo_success "$2 compiled"
188
     check_warnings "$dlog/$2.$REL.txt"
thomasl's avatar
thomasl committed
189
  else
thomasl's avatar
thomasl committed
190
     echo_error "$2 compilation failed"
191
     exit 1
thomasl's avatar
thomasl committed
192 193 194
  fi
}

195 196 197 198
############################################
# External packages installers
############################################

199
install_protobuf_from_source(){
200 201 202
    protobuf_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_install_log.txt
    echo_info "\nInstalling Google Protobuf from sources. The log file for Protobuf installation is here: $protobuf_install_log "
    (
203 204 205 206
    cd /tmp
    echo "Downloading protobuf"
    rm -rf /tmp/protobuf-2.6.1.tar.gz* /tmp/protobuf-2.6.1
    wget https://github.com/google/protobuf/releases/download/v2.6.1/protobuf-2.6.1.tar.gz
207
    tar -xzvf protobuf-2.6.1.tar.gz --owner $USER --group $USER --no-same-owner 
208 209 210 211 212 213
    cd protobuf-2.6.1/
    ./configure
    echo "Compiling protobuf"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
214
    ) >& $protobuf_install_log
215 216 217
}

install_protobuf_c_from_source(){
218 219 220
    protobuf_c_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_c_install_log.txt
    echo_info "\nInstalling Google Protobuf_C from sources. The log file for Protobuf_C installation is here: $protobuf_c_install_log "
    (
221 222 223 224 225 226 227 228 229 230 231
    cd /tmp
    echo "Downloading protobuf-c"
    rm -rf /tmp/protobuf-c
    git clone https://github.com/protobuf-c/protobuf-c.git
    cd protobuf-c
    ./autogen.sh
    ./configure
    echo "Compiling protobuf-c"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
232
    ) >& $protobuf_c_install_log
233 234
}

thomasl's avatar
thomasl committed
235
check_install_usrp_uhd_driver(){
236
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
237
        #first we remove old installation
238 239
        $SUDO apt-get remove -y uhd || true
        $SUDO apt-get remove libuhd-dev libuhd003 uhd-host -y
thomasl's avatar
thomasl committed
240
        v=$(lsb_release -cs)
241 242 243
        $SUDO apt-add-repository --remove "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main"
        #The new USRP repository
        $SUDO add-apt-repository ppa:ettusresearch/uhd -y
thomasl's avatar
thomasl committed
244
        $SUDO apt-get update
245 246
        $SUDO apt-get -y --allow-unauthenticated install  python python-tk libboost-all-dev libusb-1.0-0-dev
        $SUDO apt-get -y --allow-unauthenticated install libuhd-dev libuhd003 uhd-host
247 248 249 250
    elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
        $SUDO $INSTALLER -y install python boost libusb-devel
        $SUDO $INSTALLER -y install uhd uhd-devel uhd-firmware
    fi
251 252 253
}

install_usrp_uhd_driver() {
254
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
255 256 257
        # We move uhd-host apart because it depends on linux kernel version
        # On newer kernels, it fails to install
        $SUDO apt-get -y install uhd-host
258 259 260 261 262 263
    fi
    if [ -z $1 ]; then
      $SUDO uhd_images_downloader
    else
      $SUDO uhd_images_downloader -i $1
    fi
thomasl's avatar
thomasl committed
264
}
265

266
check_install_bladerf_driver(){
267
	if [ "$(get_distribution_release)" == "ubuntu14.04" ] ; then
268 269 270
		$SUDO add-apt-repository -y ppa:bladerf/bladerf
		$SUDO apt-get update
	fi
271
	$SUDO apt-get install -y --allow-unauthenticated  bladerf libbladerf-dev
272 273
	$SUDO apt-get install -y --allow-unauthenticated bladerf-firmware-fx3
	$SUDO apt-get install -y --allow-unauthenticated bladerf-fpga-hostedx40	
274 275 276 277
}

flash_firmware_bladerf() {
	$SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
278
}
thomasl's avatar
thomasl committed
279

280 281 282 283 284 285 286 287 288 289 290 291 292 293 294
check_install_lmssdr_driver(){
	if ( [ -d "/usr/local/include/lime" ] &&
             [ -f "/usr/local/include/lime/LimeSuite.h" ] )
	then
  		echo_success "Found lmssdr drivers and tools installed from source"
        else
                echo_error "lmssdr support implies installing lmssdr drivers and tools" \
                           " from sources. check:"
                echo_info "https://open-cells.com/index.php/2017/05/10/limesdr-installation/"
                echo_fatal "Cannot compile lmssdr device" 
	fi


}

thomasl's avatar
thomasl committed
295
check_install_additional_tools (){
296 297
  $SUDO $INSTALLER update -y
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
thomasl's avatar
thomasl committed
298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314
    $SUDO apt-get install -y \
	check \
	dialog \
	dkms \
	gawk \
	libboost-all-dev \
	libpthread-stubs0-dev \
	openvpn \
	pkg-config \
	python-dev  \
	python-pexpect \
	sshfs \
	swig  \
	tshark \
	uml-utilities \
	unzip  \
	valgrind  \
315
	vlan	  \
316
	ctags \
317 318
        ntpdate \
        iperf3 \
Rohit Gupta's avatar
Rohit Gupta committed
319 320 321
        android-tools-adb \
	wvdial \
        python-numpy \
322 323 324 325 326 327
        sshpass \
        nscd \
        bc \
        ntp \
        python-scipy \
        python-matplotlib
328 329

    $SUDO pip install paramiko
330
    $SUDO pip install pyroute2 colorama
331
    $SUDO rm -fr /opt/ssh
332
    $SUDO GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/ssh.git /opt/ssh
333 334 335 336
    
    log_netiface=$OPENAIR_DIR/cmake_targets/log/netiface_install_log.txt
    echo_info "Installing Netinterfaces package. The logfile for installation is in $log_netiface"
    (
337 338 339 340 341 342
    $SUDO rm -fr /tmp/netifaces-0.10.4.tar.gz /tmp/netifaces
    wget -P /tmp  https://pypi.python.org/packages/18/fa/dd13d4910aea339c0bb87d2b3838d8fd923c11869b1f6e741dbd0ff3bc00/netifaces-0.10.4.tar.gz
    tar -xzvf /tmp/netifaces-0.10.4.tar.gz -C /tmp
    cd /tmp/netifaces-0.10.4
    $SUDO python setup.py install
    cd -
343
    ) >& $log_netiface
344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402
  elif [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
    $SUDO $INSTALLER install -y \
      check \
      dialog \
      dkms \
      gawk \
      boost-devel \
      openvpn \
      pkgconfig \
      pexpect \
      sshfs \
      swig  \
      wireshark \
      unzip  \
      valgrind  \
      vconfig	  \
      ctags \
      ntpdate \
      iperf3 \
      wvdial \
      numpy \
      sshpass \
      nscd \
      python2-paramiko \
      python-pyroute2 \
      python-netifaces

    $SUDO rm -fr /opt/ssh
    $SUDO GIT_SSL_NO_VERIFY=true git clone https://gist.github.com/2190472.git /opt/ssh
  elif [[ "$OS_DISTRO" == "fedora" ]]; then
    $SUDO $INSTALLER install -y \
      check \
      dialog \
      dkms \
      gawk \
      boost-devel \
      openvpn \
      pkgconfig \
      python-pexpect \
      sshfs \
      swig  \
      wireshark \
      unzip  \
      valgrind  \
      vconfig	  \
      ctags \
      ntpdate \
      iperf3 \
      wvdial \
      python-numpy \
      sshpass \
      nscd \
      python2-paramiko \
      python-pyroute2 \
      python-netifaces

    $SUDO rm -fr /opt/ssh
    $SUDO GIT_SSL_NO_VERIFY=true git clone https://gist.github.com/2190472.git /opt/ssh
  fi
thomasl's avatar
thomasl committed
403 404 405
}

check_install_oai_software() {
406
    local specific_packages=""
407 408 409 410
    if ! check_supported_distribution; then
        echo_error "Your distribution $(get_distribution_release) is not supported by oai !"
        exit 1
    fi
411 412
    $SUDO $INSTALLER update -y
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
413
    $SUDO apt install -y software-properties-common
414
    case "$(get_distribution_release)" in
415
        "ubuntu14.04")
416
            specific_packages="libtasn1-3-dev"
417 418 419
            # For iperf3
            $SUDO add-apt-repository "deb http://archive.ubuntu.com/ubuntu trusty-backports universe"
            $SUDO apt-get update
420
            ;;
421
        "ubuntu16.04")
422 423
            specific_packages="libtasn1-6-dev"
            ;;
424
    esac
425
    $SUDO apt-get install -y \
426
    $specific_packages \
427
	autoconf  \
thomasl's avatar
thomasl committed
428 429 430 431 432 433
	automake  \
	bison  \
	build-essential \
	cmake \
	cmake-curses-gui  \
	doxygen \
434 435
	doxygen-gui \
	texlive-latex-base \
thomasl's avatar
thomasl committed
436 437
	ethtool \
	flex  \
438 439 440
	gccxml \
	gdb  \
	git \
thomasl's avatar
thomasl committed
441 442 443 444 445 446 447 448 449 450 451
	graphviz \
	gtkwave \
	guile-2.0-dev  \
	iperf \
	iproute \
	iptables \
	iptables-dev \
	libatlas-base-dev \
	libatlas-dev \
	libblas-dev \
	libconfig8-dev \
452
	libffi-dev \
thomasl's avatar
thomasl committed
453 454 455 456 457 458
	libforms-bin \
	libforms-dev \
	libgcrypt11-dev \
	libgmp-dev \
	libgtk-3-dev \
	libidn2-0-dev  \
459
	libidn11-dev \
thomasl's avatar
thomasl committed
460
	libmysqlclient-dev  \
461
	liboctave-dev \
thomasl's avatar
thomasl committed
462
	libpgm-dev \
463
	libpython2.7-dev \
thomasl's avatar
thomasl committed
464 465 466 467 468 469 470
	libsctp1  \
	libsctp-dev  \
	libssl-dev  \
	libtool  \
	libusb-1.0-0-dev \
	libxml2 \
	libxml2-dev  \
471
	libxslt1-dev \
472 473 474
	mscgen  \
	octave \
	octave-signal \
thomasl's avatar
thomasl committed
475 476 477 478
	openssh-client \
	openssh-server \
	openssl \
	python  \
479
	subversion \
480 481 482
	xmlstarlet \
	python-pip \
	pydb \
483
	libyaml-dev \
Rohit Gupta's avatar
Rohit Gupta committed
484
	wget
Rohit Gupta's avatar
Rohit Gupta committed
485

486
    $SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
487
    
488 489 490 491 492
    #Remove old gnutls/nettle installation that was done from sources
    remove_nettle_from_source
    
    $SUDO apt-get install -y nettle-dev nettle-bin
    remove_gnutls_from_source
493

494
    $SUDO apt-get install -y libgnutls-dev
495 496 497 498 499 500 501 502 503 504 505 506 507 508 509
  elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
    if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
      if rpm -q epel-release > /dev/null; then
        echo "EPEL repos already present. Good."
      else
        echo "EPEL repos not present. Installing them."
        $SUDO $INSTALLER install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
      fi
      $SUDO $INSTALLER install -y python-epdb
      $SUDO $INSTALLER install -y gccxml
    else
      $SUDO $INSTALLER install -y mscgen pydb
      # Fedora repos already contain gccxml's successor castxml.
      $SUDO $INSTALLER install -y castxml
    fi
510
    
511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565
    $SUDO $INSTALLER install -y \
      autoconf \
      automake \
      bison \
      $CMAKE_CMD \
      doxygen \
      ethtool \
      flex \
      gdb \
      git \
      graphviz \
      gtkwave \
      guile-devel \
      iperf \
      iproute \
      iptables \
      iptables-devel \
      atlas-devel \
      blas-devel \
      libconfig-devel \
      libffi-devel \
      xforms \
      xforms-devel \
      libgcrypt-devel \
      gmp-devel \
      gtk3-devel \
      libidn2-devel  \
      libidn-devel \
      mariadb-devel \
      octave-devel \
      openpgm-devel \
      lksctp-tools \
      lksctp-tools-devel \
      openssl-devel \
      libtasn1 \
      libtool \
      libusb-devel \
      libxml2 \
      libxml2-devel \
      libxslt-devel \
      octave \
      octave-signal \
      openssh-clients \
      openssh-server \
      openssl \
      python \
      subversion \
      xmlstarlet \
      python-pip \
      wget \
      kernel-headers \
      nettle-devel \
      gnutls-devel
  fi

thomasl's avatar
thomasl committed
566
    install_asn1c_from_source
567 568
    $SUDO rm -fr /opt/ssh
    $SUDO git clone https://gist.github.com/2190472.git /opt/ssh
569 570
    install_protobuf_from_source
    install_protobuf_c_from_source
thomasl's avatar
thomasl committed
571 572
}

573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594
### Remove Nettle installation which was done from sources
remove_nettle_from_source() {
    nettle_uninstall_log=$OPENAIR_DIR/cmake_targets/log/nettle_uninstall_log.txt
    echo_info "\nUn-Installing Nettle from sources. The log file for nettle un-installation is here: $nettle_uninstall_log "
    (
    $SUDO apt-get remove -y nettle-dev nettle-bin 
    cd /tmp
    echo "Downloading nettle archive"
    $SUDO rm -rf /tmp/nettle-2.5.tar.gz* /tmp/nettle-2.5
    wget https://ftp.gnu.org/gnu/nettle/nettle-2.5.tar.gz
    if [ $? -ne 0 ]; then
      wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz
    fi
    if [ ! -f nettle-2.5.tar.gz ]; then
      echo_error "Could not download nettle source files"
      cd -
      return
    fi
    tar -xzf nettle-2.5.tar.gz
    cd nettle-2.5/
    ./configure --disable-openssl --enable-shared --prefix=/usr 
    $SUDO make uninstall || true 
595
    $SUDO ldconfig
596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618
    ) >& $nettle_uninstall_log
}

### Remove Gnutls from source
remove_gnutls_from_source(){
    gnutls_uninstall_log=$OPENAIR_DIR/cmake_targets/log/gnutls_uninstall_log.txt
    echo_info "\nUn-Installing Gnutls. The log file for Gnutls un-installation is here: $gnutls_uninstall_log "
    (
    $SUDO apt-get remove -y libgnutls-dev
    cd /tmp 
    echo "Downloading gnutls archive"
    $SUDO rm -rf /tmp/gnutls-3.1.23.tar.xz* /tmp/gnutls-3.1.23
    wget http://mirrors.dotsrc.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz || \
      wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz
    if [ ! -f gnutls-3.1.23.tar.xz ]; then
      echo_error "Could not download gnutls source files"
      cd -
      return
    fi
    tar -xJf gnutls-3.1.23.tar.xz
    cd gnutls-3.1.23/
    ./configure --prefix=/usr
    $SUDO make uninstall || true
619
    $SUDO ldconfig
620 621 622
    )>& $gnutls_uninstall_log
}

thomasl's avatar
thomasl committed
623
install_asn1c_from_source(){
624 625
    asn1_install_log=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
    echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_log "
626
    (
Cedric Roux's avatar
Cedric Roux committed
627
    $SUDO rm -rf /tmp/asn1c
628
    GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
Cedric Roux's avatar
Cedric Roux committed
629
    cd /tmp/asn1c
thomasl's avatar
thomasl committed
630
    ./configure
631
    make -j`nproc`
632
    $SUDO make install
Rohit Gupta's avatar
Rohit Gupta committed
633
    cd -
634
    $SUDO ldconfig
635
    ) > $asn1_install_log 2>&1
thomasl's avatar
thomasl committed
636 637 638 639 640
}

#################################################
# 2. compile 
################################################
thomasl's avatar
thomasl committed
641

thomasl's avatar
thomasl committed
642
install_nas_tools() {
643
  if [ ! -f .ue.nvram0 ]; then
gauthier's avatar
gauthier committed
644
    echo_success "generate .ue_emm.nvram .ue.nvram"
645
    ./nvram --gen -c $1 -o $2
gauthier's avatar
gauthier committed
646
  else
647
    [ ./nvram -nt .ue.nvram0 -o ./nvram -nt .ue_emm.nvram0 ] && ./nvram --gen -c $1 -o $2
gauthier's avatar
gauthier committed
648
  fi
thomasl's avatar
thomasl committed
649

650
  if [ ! -f .usim.nvram0 ]; then
gauthier's avatar
gauthier committed
651
    echo_success "generate .usim.nvram"
652
    ./usim --gen -c $1 -o $2
gauthier's avatar
gauthier committed
653
  else
654
    [ ./usim -nt .usim.nvram0 ] && ./usim --gen -c $1 -o $2
gauthier's avatar
gauthier committed
655
  fi
thomasl's avatar
thomasl committed
656 657

}
658

thomasl's avatar
thomasl committed
659 660 661 662 663 664 665 666 667

################################
# set_openair_env
###############################
set_openair_env(){
    fullpath=`readlink -f $BASH_SOURCE`
    [ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath`
    openair_path=${fullpath%/cmake_targets/*}
    openair_path=${openair_path%/targets/*}
thomasl's avatar
thomasl committed
668
    openair_path=${openair_path%/openair[123]/*}    
thomasl's avatar
thomasl committed
669 670 671 672 673 674 675
    export OPENAIR_DIR=$openair_path
    export OPENAIR1_DIR=$openair_path/openair1
    export OPENAIR2_DIR=$openair_path/openair2
    export OPENAIR3_DIR=$openair_path/openair3
    export OPENAIR_TARGETS=$openair_path/targets
}

676 677 678 679 680 681 682 683
################################
# Function to killall the subprocesses when Ctrl-C Key is hit
###############################
function handle_ctrl_c(){
CURPID=$$
ppid=$$
arraycounter=1
echo_info "** Trapped CTRL-C. Killing all subprocesses now..."
684 685
echo_info "** Calling sync now..."
sync 
686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702
while true
do
        FORLOOP=FALSE
        # Get all the child process id
        for i in `ps -ef| awk '$3 == '$ppid' { print $2 }'`
        do
                if [ $i -ne $CURPID ] ; then
                        procid[$arraycounter]=$i
                        arraycounter=`expr $arraycounter + 1`
                        ppid=$i
                        FORLOOP=TRUE
                fi
        done
        if [ "$FORLOOP" = "FALSE" ] ; then
           arraycounter=`expr $arraycounter - 1`
           ## We want to kill child process id first and then parent id's
           while [ $arraycounter -ne 0 ]
703 704 705 706 707
           do  
             echo "first we send ctrl-c to program"
             $SUDO kill -INT "${procid[$arraycounter]}"
             sleep 5
             echo "Now we force kill if that didn't work"
708 709 710 711 712 713 714 715 716
             $SUDO kill -9 "${procid[$arraycounter]}" >/dev/null
             arraycounter=`expr $arraycounter - 1`
           done
         exit
        fi
done
}


717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733
# get from http://www.linuxjournal.com/content/validating-ip-address-bash-script
validate_ip() {

local  ip=$1
local  stat=1

if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
    OIFS=$IFS
    IFS='.'
    ip=($ip)
    IFS=$OIFS
    [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
        && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
    stat=$?
fi

return $stat
Rohit Gupta's avatar
Rohit Gupta committed
734
}