usrp_lib.cpp 26 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
/*******************************************************************************
    OpenAirInterface 
    Copyright(c) 1999 - 2014 Eurecom

    OpenAirInterface is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.


    OpenAirInterface is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with OpenAirInterface.The full GNU General Public License is 
    included in this distribution in the file called "COPYING". If not, 
    see <http://www.gnu.org/licenses/>.

   Contact Information
   OpenAirInterface Admin: openair_admin@eurecom.fr
   OpenAirInterface Tech : openair_tech@eurecom.fr
24
   OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
25
  
ghaddab's avatar
ghaddab committed
26
   Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
27 28

 *******************************************************************************/
29 30 31

/** usrp_lib.cpp
 *
32
 * \author: HongliangXU : hong-liang-xu@agilent.com
33 34 35 36 37 38 39 40
 */

#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
#include <uhd/utils/thread_priority.hpp>
#include <uhd/usrp/multi_usrp.hpp>
41
#include <uhd/version.hpp>
42 43 44 45 46 47
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
48

49
#include "common_lib.h"
50 51 52 53 54 55 56
#ifdef __SSE4_1__
#  include <smmintrin.h>
#endif
 
#ifdef __AVX2__
#  include <immintrin.h>
#endif
57

58 59 60 61 62
/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */

/*! \brief USRP Configuration */ 
63 64 65 66 67 68
typedef struct
{

  // --------------------------------
  // variables for USRP configuration
  // --------------------------------
69
  //! USRP device pointer
70 71
  uhd::usrp::multi_usrp::sptr usrp;
  //uhd::usrp::multi_usrp::sptr rx_usrp;
72
  
73
  //create a send streamer and a receive streamer
74
  //! USRP TX Stream
75
  uhd::tx_streamer::sptr tx_stream;
76
  //! USRP RX Stream
77 78
  uhd::rx_streamer::sptr rx_stream;

79
  //! USRP TX Metadata
80
  uhd::tx_metadata_t tx_md;
81
  //! USRP RX Metadata
82 83
  uhd::rx_metadata_t rx_md;

84
  //! USRP Timestamp Information
85
  uhd::time_spec_t tm_spec;
86

87
  //setup variables and allocate buffer
88
  //! USRP Metadata
89 90
  uhd::async_metadata_t async_md;

91
  //! Sampling rate
92
  double sample_rate;
93 94

  //! time offset between transmiter timestamp and receiver timestamp;
95
  double tdiff;
96 97

  //! TX forward samples. We use usrp_time_offset to get this value
98 99 100 101 102 103
  int tx_forward_nsamps; //166 for 20Mhz


  // --------------------------------
  // Debug and output control
  // --------------------------------
104
  //! Number of underflows
105
  int num_underflows;
106
  //! Number of overflows
107
  int num_overflows;
108 109
  
  //! Number of sequential errors
110
  int num_seq_errors;
111
  //! tx count
112
  int64_t tx_count;
113
  //! rx count
114
  int64_t rx_count;
115
  //! timestamp of RX packet
116 117 118 119
  openair0_timestamp rx_timestamp;

} usrp_state_t;

120 121 122
/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
123 124 125 126 127 128
static int trx_usrp_start(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  // init recv and send streaming
  uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
129
  cmd.time_spec = s->usrp->get_time_now() + uhd::time_spec_t(0.05);
130 131 132
  cmd.stream_now = false; // start at constant delay
  s->rx_stream->issue_stream_cmd(cmd);

133
  s->tx_md.time_spec = cmd.time_spec + uhd::time_spec_t(1-(double)s->tx_forward_nsamps/s->sample_rate);
134 135 136 137 138 139 140 141
  s->tx_md.has_time_spec = true;
  s->tx_md.start_of_burst = true;
  s->tx_md.end_of_burst = false;


  s->rx_count = 0;
  s->tx_count = 0;
  s->rx_timestamp = 0;
142 143

  return 0;
144
}
145 146 147
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources 
 * \param device the hardware to use
 */
148 149 150 151 152 153
static void trx_usrp_end(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->rx_stream->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);

navid's avatar
navid committed
154 155 156 157 158
  //send a mini EOB packet
  s->tx_md.end_of_burst = true;
  s->tx_stream->send("", 0, s->tx_md);
  s->tx_md.end_of_burst = false;
  
159
}
160

161 162 163 164 165 166 167 168
/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
      @param timestamp The timestamp at whicch the first sample MUST be sent 
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
      @param antenna_id index of the antenna if the device has multiple anteannas
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
*/ 
169
static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags)
170 171 172 173 174 175 176
{
  usrp_state_t *s = (usrp_state_t*)device->priv;
  s->tx_md.time_spec = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
  if(flags)
    s->tx_md.has_time_spec = true;
  else
    s->tx_md.has_time_spec = false;
knopp's avatar
knopp committed
177 178 179 180 181 182 183 184

  if (cc>1) {
    std::vector<void *> buff_ptrs;
    for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
    s->tx_stream->send(buff_ptrs, nsamps, s->tx_md);
  }
  else
    s->tx_stream->send(buff[0], nsamps, s->tx_md);
185
  s->tx_md.start_of_burst = false;
186 187

  return 0;
188 189
}

190 191 192 193 194 195 196 197 198 199 200
/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
201
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc)
202
{
203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218
   usrp_state_t *s = (usrp_state_t*)device->priv;
   int samples_received=0,i,j;
   int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
   __m256i buff_tmp[2][nsamps>>3];
   nsamps2 = (nsamps+7)>>3;
#else
   __m128i buff_tmp[2][nsamps>>2];
   nsamps2 = (nsamps+3)>>2;
#endif
#elif defined(__arm__)
   int16x8_t buff_tmp[2][nsamps>>2];
   nsamps2 = (nsamps+3)>>2;
#endif

219

220
  if (device->type == USRP_B200_DEV) {  
221
    if (cc>1) {
gauthier's avatar
gauthier committed
222
    // receive multiple channels (e.g. RF A and RF B)
223
      std::vector<void *> buff_ptrs;
224
 
225 226 227
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff_tmp[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
gauthier's avatar
gauthier committed
228
    // receive a single channel (e.g. from connector RF A)
229 230 231
      samples_received = s->rx_stream->recv(buff_tmp[0], nsamps, s->rx_md);
    }
   
232
  // bring RX data into 12 LSBs for softmodem RX
233 234
    for (int i=0;i<cc;i++) {
      for (int j=0; j<nsamps2; j++) {      
235 236
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
237
        ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
238
#else
239
        ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
240 241
#endif
#elif defined(__arm__)
242
        ((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
243
#endif
244
      }
245
    }
246
  } else if (device->type == USRP_X300_DEV) {
247 248 249 250 251 252 253 254 255
    if (cc>1) {
    // receive multiple channels (e.g. RF A and RF B)
      std::vector<void *> buff_ptrs;
 
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
    // receive a single channel (e.g. from connector RF A)
      samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
256
    }
257
  }
258

259 260 261 262
  if (samples_received < nsamps) {
    printf("[recv] received %d samples out of %d\n",samples_received,nsamps);
    
  }
263

264 265 266 267 268 269 270 271 272 273 274 275 276 277 278
  //handle the error code
  switch(s->rx_md.error_code){
  case uhd::rx_metadata_t::ERROR_CODE_NONE:
    break;
  case uhd::rx_metadata_t::ERROR_CODE_OVERFLOW:
    printf("[recv] USRP RX OVERFLOW!\n");
    s->num_overflows++;
    break;
  case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT:
    printf("[recv] USRP RX TIMEOUT!\n");
    break;
  default:
    printf("[recv] Unexpected error on RX, Error code: 0x%x\n",s->rx_md.error_code);
    break;
  }
279 280 281
  s->rx_count += nsamps;
  s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
  *ptimestamp = s->rx_timestamp;
282

283 284 285
  return samples_received;
}

286 287 288
/*! \brief Get current timestamp of USRP
 * \param device the hardware to use
*/
289 290 291 292 293 294 295 296
openair0_timestamp get_usrp_time(openair0_device *device) 
{
 
  usrp_state_t *s = (usrp_state_t*)device->priv;
  
  return s->usrp->get_time_now().to_ticks(s->sample_rate);
} 

297 298 299 300
/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
301 302 303 304
static bool is_equal(double a, double b)
{
  return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
}
305

306 307 308 309 310 311
/*! \brief Set frequencies (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
 * \returns 0 in success 
 */
312
int trx_usrp_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, int dummy) {
313 314 315

  usrp_state_t *s = (usrp_state_t*)device->priv;

316
  printf("Setting USRP TX Freq %f, RX Freq %f\n",openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0]);
317 318 319 320 321 322 323
  s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[0]);
  s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[0]);

  return(0);
  
}

324 325 326 327 328
/*! \brief Set RX frequencies 
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) {

  usrp_state_t *s = (usrp_state_t*)device->priv;
  static int first_call=1;
  static double rf_freq,diff;

  uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);

  rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
  rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
  rf_freq=openair0_cfg[0].rx_freq[0];
  s->usrp->set_rx_freq(rx_tune_req);

  return(0);
  
}

346 347 348 349 350
/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
351
int trx_usrp_set_gains(openair0_device* device, 
352
		       openair0_config_t *openair0_cfg) {
353 354 355 356

  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[0]);
357 358 359 360 361 362 363 364 365
  ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);
  // limit to maximum gain
  if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
    
    printf("RX Gain 0 too high, reduce by %f dB\n",
	   openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());	   
    exit(-1);
  }
  s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
366
  printf("Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n", openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],openair0_cfg[0].rx_gain[0],gain_range.stop());
367

368 369
  return(0);
}
370

371 372 373
/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
374
int trx_usrp_stop(int card) {
375 376
  return(0);
}
377

378
/*! \brief USRPB210 RX calibration table */
379
rx_gain_calib_table_t calib_table_b210[] = {
Raymond Knopp's avatar
Raymond Knopp committed
380 381 382 383 384
  {3500000000.0,44.0},
  {2660000000.0,49.0},
  {2300000000.0,50.0},
  {1880000000.0,53.0},
  {816000000.0,58.0},
385 386
  {-1,0}};

387
/*! \brief USRPB210 RX calibration table */
388 389 390 391 392 393
rx_gain_calib_table_t calib_table_b210_38[] = {
  {3500000000.0,44.0},
  {2660000000.0,49.8},
  {2300000000.0,51.0},
  {1880000000.0,53.0},
  {816000000.0,57.0},
394 395
  {-1,0}};

396
/*! \brief USRPx310 RX calibration table */
397 398
rx_gain_calib_table_t calib_table_x310[] = {
  {3500000000.0,77.0},
399
  {2660000000.0,81.0},
400 401
  {2300000000.0,81.0},
  {1880000000.0,82.0},
402
  {816000000.0,85.0},
403 404
  {-1,0}};

405 406 407 408 409
/*! \brief Set RX gain offset 
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
 * \returns 0 in success 
 */
410
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {
411 412 413

  int i=0;
  // loop through calibration table to find best adjustment factor for RX frequency
414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439
  double min_diff = 6e9,diff,gain_adj=0.0;
  if (bw_gain_adjust==1) {
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:      
      break;
    case 23040000:
      gain_adj=1.25;
      break;
    case 15360000:
      gain_adj=3.0;
      break;
    case 7680000:
      gain_adj=6.0;
      break;
    case 3840000:
      gain_adj=9.0;
      break;
    case 1920000:
      gain_adj=12.0;
      break;
    default:
      printf("unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
440 441
  while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
    diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
442
    printf("cal %d: freq %f, offset %f, diff %f\n",
443 444 445
	   i,
	   openair0_cfg->rx_gain_calib_table[i].freq,
	   openair0_cfg->rx_gain_calib_table[i].offset,diff);
446 447
    if (min_diff > diff) {
      min_diff = diff;
448
      openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
449 450 451 452 453 454
    }
    i++;
  }
  
}

455 456 457 458
/*! \brief print the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
459
int trx_usrp_get_stats(openair0_device* device) {
460

461 462 463
  return(0);

}
464 465 466 467 468

/*! \brief Reset the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
469
int trx_usrp_reset_stats(openair0_device* device) {
470 471 472 473

  return(0);

}
474

475

476

477
extern "C" {
478 479 480 481
/*! \brief Initialize Openair USRP target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
482
  int device_init(openair0_device* device, openair0_config_t *openair0_cfg) {
483
    
484 485 486 487 488
    uhd::set_thread_priority_safe(1.0);
    usrp_state_t *s = (usrp_state_t*)malloc(sizeof(usrp_state_t));
    memset(s, 0, sizeof(usrp_state_t));
    
    // Initialize USRP device
489

490

491
  std::string args = "type=b200";
knopp's avatar
knopp committed
492 493


494
  uhd::device_addrs_t device_adds = uhd::device::find(args);
495
  size_t i;
496 497 498 499 500
  
  int vers=0,subvers=0,subsubvers=0;
  int bw_gain_adjust=0;

  sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
501

502
  printf("Checking for USRPs : UHD %s (%d.%d.%d)\n",uhd::get_version_string().c_str(),vers,subvers,subsubvers);
503
  
504 505
  if(device_adds.size() == 0)
  {
506 507 508 509 510 511 512 513
    double usrp_master_clock = 184.32e6;

    std::string args = "type=x300";
    
    // workaround for an api problem, master clock has to be set with the constructor not via set_master_clock_rate
    args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
    
    uhd::device_addrs_t device_adds = uhd::device::find(args);
514

515 516 517 518 519
    if(device_adds.size() == 0)
    {
      std::cerr<<"No USRP Device Found. " << std::endl;
      free(s);
      return -1;
knopp's avatar
knopp committed
520

521
    }
knopp's avatar
knopp committed
522

523

524 525 526 527 528 529 530 531
    printf("Found USRP X300\n");
    s->usrp = uhd::usrp::multi_usrp::make(args);
    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);

    // lock mboard clocks
    s->usrp->set_clock_source("internal");
    
532
    //Setting device type to USRP X300/X310 
533
    device->type=USRP_X300_DEV;
534

535 536 537
    // this is not working yet, master clock has to be set via constructor
    // set master clock rate and sample rate for tx & rx for streaming
    //s->usrp->set_master_clock_rate(usrp_master_clock);
538 539

    openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
540
    
541 542
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
543 544 545
            // from usrp_time_offset
      openair0_cfg[0].samples_per_packet    = 2048;
      openair0_cfg[0].tx_sample_advance     = 15;
546 547
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
548
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
549
      break;
550
    case 15360000:
551 552
      openair0_cfg[0].samples_per_packet    = 2048;
      openair0_cfg[0].tx_sample_advance     = 45;
553 554
      openair0_cfg[0].tx_bw                 = 10e6;
      openair0_cfg[0].rx_bw                 = 10e6;
555
      openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
556
      break;
557
    case 7680000:
558 559
      openair0_cfg[0].samples_per_packet    = 1024;
      openair0_cfg[0].tx_sample_advance     = 50;
560 561
      openair0_cfg[0].tx_bw                 = 5e6;
      openair0_cfg[0].rx_bw                 = 5e6;
562
      openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
563
      break;
564
    case 1920000:
565 566
      openair0_cfg[0].samples_per_packet    = 256;
      openair0_cfg[0].tx_sample_advance     = 50;
567 568
      openair0_cfg[0].tx_bw                 = 1.25e6;
      openair0_cfg[0].rx_bw                 = 1.25e6;
569
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
570 571 572 573 574 575 576
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }

577 578
  } else {
    printf("Found USRP B200");
579
    args += ",num_recv_frames=256" ; 
580 581 582 583
    s->usrp = uhd::usrp::multi_usrp::make(args);

    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);
584 585 586 587
    
    // do not explicitly set the clock to "internal", because this will disable the gpsdo
    //    // lock mboard clocks
    //    s->usrp->set_clock_source("internal");
588
    // set master clock rate and sample rate for tx & rx for streaming
589

590
    device->type = USRP_B200_DEV;
591

knopp's avatar
knopp committed
592

593 594 595 596 597 598 599 600
    if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
      bw_gain_adjust=0;
    }
    else {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
      bw_gain_adjust=1;
    }
601

602 603
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
604
      s->usrp->set_master_clock_rate(30.72e6);
Raymond Knopp's avatar
Raymond Knopp committed
605
      openair0_cfg[0].samples_per_packet    = 4096;
606
      openair0_cfg[0].tx_sample_advance     = 115;
607 608
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
609
      openair0_cfg[0].tx_scheduling_advance = 11*openair0_cfg[0].samples_per_packet;
610
      break;
611
    case 23040000:
612
      s->usrp->set_master_clock_rate(23.04e6); //to be checked
613 614
      openair0_cfg[0].samples_per_packet    = 2048;
      openair0_cfg[0].tx_sample_advance     = 113;
615 616
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
617 618
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
      break;
619
    case 15360000:
620
      s->usrp->set_master_clock_rate(30.72e06);
621
      openair0_cfg[0].samples_per_packet    = 2048;
622
      openair0_cfg[0].tx_sample_advance     = 103; 
623 624
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
625
      openair0_cfg[0].tx_scheduling_advance = 10240;
626
      break;
627
    case 7680000:
Rohit Gupta's avatar
Rohit Gupta committed
628
      s->usrp->set_master_clock_rate(30.72e6);
629
      openair0_cfg[0].samples_per_packet    = 1024;
630
      openair0_cfg[0].tx_sample_advance     = 80;
631 632
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
633
      openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
634
      break;
635
    case 1920000:
636
      s->usrp->set_master_clock_rate(7.68e6);
637 638
      openair0_cfg[0].samples_per_packet    = 256;
      openair0_cfg[0].tx_sample_advance     = 40;
639 640
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
641
      openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
642 643 644 645 646 647 648
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
knopp's avatar
knopp committed
649

650
  /* device specific */
651 652 653 654
  openair0_cfg[0].txlaunch_wait = 1;//manage when TX processing is triggered
  openair0_cfg[0].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
  openair0_cfg[0].iq_txshift = 4;//shift
  openair0_cfg[0].iq_rxrescale = 15;//rescale iqs
655
  
656
  for(i=0;i<s->usrp->get_rx_num_channels();i++) {
657
    if (i<openair0_cfg[0].rx_num_channels) {
knopp's avatar
knopp committed
658
      s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
659 660
      //s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
      //printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
knopp's avatar
knopp committed
661
      s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
662
      set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
663 664 665 666 667 668 669 670 671 672 673 674

      ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
      // limit to maximum gain
      if (openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] > gain_range.stop()) {
	
        printf("RX Gain %lu too high, lower by %f dB\n",i,openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop());
	exit(-1);
      }
      s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i);
      printf("RX Gain %lu %f (%f) => %f (max %f)\n",i,
	     openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
	     openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
675 676
    }
  }
677
  for(i=0;i<s->usrp->get_tx_num_channels();i++) {
678
    if (i<openair0_cfg[0].tx_num_channels) {
knopp's avatar
knopp committed
679
      s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
680 681
      //s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
      //printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
knopp's avatar
knopp committed
682 683
      s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
      s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
684 685
    }
  }
knopp's avatar
knopp committed
686 687


688 689
  // display USRP settings
  std::cout << boost::format("Actual master clock: %fMHz...") % (s->usrp->get_master_clock_rate()/1e6) << std::endl;
690 691
  
  sleep(1);
692 693

  // create tx & rx streamer
694
  uhd::stream_args_t stream_args_rx("sc16", "sc16");
695
  //stream_args_rx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].rx_num_channels*openair0_cfg[0].samples_per_packet));
696
  for (i = 0; i<openair0_cfg[0].rx_num_channels; i++)
697 698 699 700 701 702 703
    stream_args_rx.channels.push_back(i);
  s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
  std::cout << boost::format("rx_max_num_samps %u") % (s->rx_stream->get_max_num_samps()) << std::endl;
  //openair0_cfg[0].samples_per_packet = s->rx_stream->get_max_num_samps();

  uhd::stream_args_t stream_args_tx("sc16", "sc16");
  //stream_args_tx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].tx_num_channels*openair0_cfg[0].samples_per_packet));
704
  for (i = 0; i<openair0_cfg[0].tx_num_channels; i++)
705 706
      stream_args_tx.channels.push_back(i);
  s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);
707 708
  std::cout << boost::format("tx_max_num_samps %u") % (s->tx_stream->get_max_num_samps()) << std::endl;

709

710 711 712 713 714
 /* Setting TX/RX BW after streamers are created due to USRP calibration issue */
  for(i=0;i<s->usrp->get_tx_num_channels();i++) {
    if (i<openair0_cfg[0].tx_num_channels) {
      s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
      printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
Rohit Gupta's avatar
Rohit Gupta committed
715 716 717 718 719
    }
  }
  for(i=0;i<s->usrp->get_rx_num_channels();i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
      s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
720 721 722 723
      printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
    }
  }

724
  s->usrp->set_time_now(uhd::time_spec_t(0.0));
725
 
726

knopp's avatar
knopp committed
727 728
  for (i=0;i<openair0_cfg[0].rx_num_channels;i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
729
      printf("RX Channel %lu\n",i);
knopp's avatar
knopp committed
730 731 732 733 734 735 736 737 738 739 740
      std::cout << boost::format("Actual RX sample rate: %fMSps...") % (s->usrp->get_rx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX frequency: %fGHz...") % (s->usrp->get_rx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual RX gain: %f...") % (s->usrp->get_rx_gain(i)) << std::endl;
      std::cout << boost::format("Actual RX bandwidth: %fM...") % (s->usrp->get_rx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX antenna: %s...") % (s->usrp->get_rx_antenna(i)) << std::endl;
    }
  }

  for (i=0;i<openair0_cfg[0].tx_num_channels;i++) {

    if (i<openair0_cfg[0].tx_num_channels) { 
741
      printf("TX Channel %lu\n",i);
knopp's avatar
knopp committed
742 743 744 745 746 747 748 749
      std::cout << std::endl<<boost::format("Actual TX sample rate: %fMSps...") % (s->usrp->get_tx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX frequency: %fGHz...") % (s->usrp->get_tx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual TX gain: %f...") % (s->usrp->get_tx_gain(i)) << std::endl;
      std::cout << boost::format("Actual TX bandwidth: %fM...") % (s->usrp->get_tx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX antenna: %s...") % (s->usrp->get_tx_antenna(i)) << std::endl;
    }
  }

750
  std::cout << boost::format("Device timestamp: %f...") % (s->usrp->get_time_now().get_real_secs()) << std::endl;
751 752 753 754

  device->priv = s;
  device->trx_start_func = trx_usrp_start;
  device->trx_write_func = trx_usrp_write;
755 756 757 758 759 760 761
  device->trx_read_func  = trx_usrp_read;
  device->trx_get_stats_func = trx_usrp_get_stats;
  device->trx_reset_stats_func = trx_usrp_reset_stats;
  device->trx_end_func   = trx_usrp_end;
  device->trx_stop_func  = trx_usrp_stop;
  device->trx_set_freq_func = trx_usrp_set_freq;
  device->trx_set_gains_func   = trx_usrp_set_gains;
762
  
knopp's avatar
knopp committed
763
  s->sample_rate = openair0_cfg[0].sample_rate;
764 765 766 767 768 769 770 771 772
  // TODO:
  // init tx_forward_nsamps based usrp_time_offset ex
  if(is_equal(s->sample_rate, (double)30.72e6))
    s->tx_forward_nsamps  = 176;
  if(is_equal(s->sample_rate, (double)15.36e6))
    s->tx_forward_nsamps = 90;
  if(is_equal(s->sample_rate, (double)7.68e6))
    s->tx_forward_nsamps = 50;
  return 0;
773
  }
774
}
775
/*@}*/