usrp_lib.cpp 27.2 KB
Newer Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
/*******************************************************************************
    OpenAirInterface 
    Copyright(c) 1999 - 2014 Eurecom

    OpenAirInterface is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.


    OpenAirInterface is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with OpenAirInterface.The full GNU General Public License is 
    included in this distribution in the file called "COPYING". If not, 
    see <http://www.gnu.org/licenses/>.

   Contact Information
   OpenAirInterface Admin: openair_admin@eurecom.fr
   OpenAirInterface Tech : openair_tech@eurecom.fr
24
   OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
25
  
ghaddab's avatar
ghaddab committed
26
   Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
27
28

 *******************************************************************************/
knopp's avatar
   
knopp committed
29
30
31

/** usrp_lib.cpp
 *
32
 * \author: HongliangXU : hong-liang-xu@agilent.com
knopp's avatar
   
knopp committed
33
34
35
36
37
38
39
40
 */

#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
#include <uhd/utils/thread_priority.hpp>
#include <uhd/usrp/multi_usrp.hpp>
41
#include <uhd/version.hpp>
knopp's avatar
   
knopp committed
42
43
44
45
46
47
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
48
#include <time.h>
knopp's avatar
   
knopp committed
49
#include "common_lib.h"
50
51
52
53
54
55
56
#ifdef __SSE4_1__
#  include <smmintrin.h>
#endif
 
#ifdef __AVX2__
#  include <immintrin.h>
#endif
57

58
59
60
61
#ifdef __arm__
#  include <arm_neon.h>
#endif

62
63
64
65
66
/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */

/*! \brief USRP Configuration */ 
knopp's avatar
   
knopp committed
67
68
69
70
71
72
typedef struct
{

  // --------------------------------
  // variables for USRP configuration
  // --------------------------------
73
  //! USRP device pointer
knopp's avatar
   
knopp committed
74
75
  uhd::usrp::multi_usrp::sptr usrp;
  //uhd::usrp::multi_usrp::sptr rx_usrp;
76
  
knopp's avatar
   
knopp committed
77
  //create a send streamer and a receive streamer
78
  //! USRP TX Stream
knopp's avatar
   
knopp committed
79
  uhd::tx_streamer::sptr tx_stream;
80
  //! USRP RX Stream
knopp's avatar
   
knopp committed
81
82
  uhd::rx_streamer::sptr rx_stream;

83
  //! USRP TX Metadata
knopp's avatar
   
knopp committed
84
  uhd::tx_metadata_t tx_md;
85
  //! USRP RX Metadata
knopp's avatar
   
knopp committed
86
87
  uhd::rx_metadata_t rx_md;

88
  //! USRP Timestamp Information
knopp's avatar
   
knopp committed
89
  uhd::time_spec_t tm_spec;
90

knopp's avatar
   
knopp committed
91
  //setup variables and allocate buffer
92
  //! USRP Metadata
knopp's avatar
   
knopp committed
93
94
  uhd::async_metadata_t async_md;

95
  //! Sampling rate
knopp's avatar
   
knopp committed
96
  double sample_rate;
97
98

  //! time offset between transmiter timestamp and receiver timestamp;
knopp's avatar
   
knopp committed
99
  double tdiff;
100
101

  //! TX forward samples. We use usrp_time_offset to get this value
knopp's avatar
   
knopp committed
102
103
104
105
106
107
  int tx_forward_nsamps; //166 for 20Mhz


  // --------------------------------
  // Debug and output control
  // --------------------------------
108
  //! Number of underflows
knopp's avatar
   
knopp committed
109
  int num_underflows;
110
  //! Number of overflows
knopp's avatar
   
knopp committed
111
  int num_overflows;
112
113
  
  //! Number of sequential errors
knopp's avatar
   
knopp committed
114
  int num_seq_errors;
115
  //! tx count
knopp's avatar
   
knopp committed
116
  int64_t tx_count;
117
  //! rx count
knopp's avatar
   
knopp committed
118
  int64_t rx_count;
119
  //! timestamp of RX packet
knopp's avatar
   
knopp committed
120
121
122
123
  openair0_timestamp rx_timestamp;

} usrp_state_t;

124
125
126
/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
knopp's avatar
   
knopp committed
127
128
129
130
131
132
static int trx_usrp_start(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  // init recv and send streaming
  uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
knopp's avatar
   
knopp committed
133
  cmd.time_spec = s->usrp->get_time_now() + uhd::time_spec_t(0.05);
knopp's avatar
   
knopp committed
134
135
136
  cmd.stream_now = false; // start at constant delay
  s->rx_stream->issue_stream_cmd(cmd);

knopp's avatar
   
knopp committed
137
  s->tx_md.time_spec = cmd.time_spec + uhd::time_spec_t(1-(double)s->tx_forward_nsamps/s->sample_rate);
knopp's avatar
   
knopp committed
138
139
140
141
142
143
144
145
  s->tx_md.has_time_spec = true;
  s->tx_md.start_of_burst = true;
  s->tx_md.end_of_burst = false;


  s->rx_count = 0;
  s->tx_count = 0;
  s->rx_timestamp = 0;
146
147

  return 0;
knopp's avatar
   
knopp committed
148
}
149
150
151
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources 
 * \param device the hardware to use
 */
knopp's avatar
   
knopp committed
152
153
154
155
156
157
static void trx_usrp_end(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->rx_stream->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);

navid's avatar
navid committed
158
159
160
161
162
  //send a mini EOB packet
  s->tx_md.end_of_burst = true;
  s->tx_stream->send("", 0, s->tx_md);
  s->tx_md.end_of_burst = false;
  
knopp's avatar
   
knopp committed
163
}
164

165
166
167
168
169
170
171
172
/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
      @param timestamp The timestamp at whicch the first sample MUST be sent 
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
      @param antenna_id index of the antenna if the device has multiple anteannas
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
*/ 
173
static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags)
knopp's avatar
   
knopp committed
174
{
175
176
177
178
179
180
181
   static long long int loop=0;
   static long time_min=0, time_max=0, time_avg=0;
   struct timespec tp_start, tp_end;
   long time_diff;
   clock_gettime(CLOCK_MONOTONIC_RAW, &tp_start);

  int ret=0, ret_i=0;
knopp's avatar
   
knopp committed
182
  usrp_state_t *s = (usrp_state_t*)device->priv;
knopp's avatar
knopp committed
183

184
  s->tx_md.time_spec = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
knopp's avatar
knopp committed
185

186
  
knopp's avatar
   
knopp committed
187
188
189
190
  if(flags)
    s->tx_md.has_time_spec = true;
  else
    s->tx_md.has_time_spec = false;
191
  
knopp's avatar
knopp committed
192
193
194
  if (cc>1) {
    std::vector<void *> buff_ptrs;
    for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
195
    ret = (int)s->tx_stream->send(buff_ptrs, nsamps, s->tx_md,1e-3);
knopp's avatar
knopp committed
196
197
  }
  else
198
199
    ret = (int)s->tx_stream->send(buff[0], nsamps, s->tx_md,1e-3);

knopp's avatar
   
knopp committed
200
  s->tx_md.start_of_burst = false;
201

202
203
204
  if (ret != nsamps) {
    printf("[xmit] tx samples %d != %d\n",ret,nsamps);
  }
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219

  clock_gettime(CLOCK_MONOTONIC_RAW, &tp_end);
  time_diff = (tp_end.tv_sec - tp_start.tv_sec) *1E09  + (tp_end.tv_nsec - tp_start.tv_nsec);
  if  (time_min==0 ||loop==1 || time_min > time_diff)
    time_min=time_diff;
  if  (time_max==0 ||loop==1 || time_max < time_diff)
    time_max=time_diff;
  if (time_avg ==0 ||loop==1)
    time_avg= time_diff;
  else
    time_avg=(time_diff+time_avg) /2.0;
  
  if ( loop%10000 ==0)
     printf("\n usrp_write: min(ns)=%d, max(ns)=%d, avg(ns)=%d", (int)time_min, (int)time_max,(int)time_avg);
   loop++;
220
  return ret;
knopp's avatar
   
knopp committed
221
222
}

223
224
225
226
227
228
229
230
231
232
233
/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
knopp's avatar
   
knopp committed
234
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc)
knopp's avatar
   
knopp committed
235
{
236
237
238
239
240
   static long long int loop=0;
   static long time_min=0, time_max=0, time_avg=0;
   struct timespec tp_start, tp_end;
   long time_diff;
   clock_gettime(CLOCK_MONOTONIC_RAW, &tp_start);
241
242
243
244
245
246
   usrp_state_t *s = (usrp_state_t*)device->priv;
   int samples_received=0,i,j;
   int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
   nsamps2 = (nsamps+7)>>3;
247
   __m256i buff_tmp[2][nsamps2];
248
249
#else
   nsamps2 = (nsamps+3)>>2;
250
   __m128i buff_tmp[2][nsamps2];
251
252
253
#endif
#elif defined(__arm__)
   nsamps2 = (nsamps+3)>>2;
254
   int16x8_t buff_tmp[2][nsamps2];
255
256
#endif

knopp's avatar
   
knopp committed
257

258
  if (device->type == USRP_B200_DEV) {  
259
    if (cc>1) {
gauthier's avatar
gauthier committed
260
    // receive multiple channels (e.g. RF A and RF B)
261
      std::vector<void *> buff_ptrs;
262
 
263
264
265
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff_tmp[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
gauthier's avatar
gauthier committed
266
    // receive a single channel (e.g. from connector RF A)
267
268
      samples_received = s->rx_stream->recv(buff_tmp[0], nsamps, s->rx_md);
    }
269

270
  // bring RX data into 12 LSBs for softmodem RX
271
272
    for (int i=0;i<cc;i++) {
      for (int j=0; j<nsamps2; j++) {      
273
274
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
275
        ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
276
#else
277
        ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
278
279
#endif
#elif defined(__arm__)
280
        ((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
281
#endif
282
      }
283
    }
284
  } else if (device->type == USRP_X300_DEV) {
285
    if (cc>1) { 
286
287
288
289
290
291
292
293
    // receive multiple channels (e.g. RF A and RF B)
      std::vector<void *> buff_ptrs;
 
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
    // receive a single channel (e.g. from connector RF A)
      samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
navid's avatar
navid committed
294
    }
295
  }
296

knopp's avatar
   
knopp committed
297
298
299
300
  if (samples_received < nsamps) {
    printf("[recv] received %d samples out of %d\n",samples_received,nsamps);
    
  }
navid's avatar
navid committed
301

knopp's avatar
   
knopp committed
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
  //handle the error code
  switch(s->rx_md.error_code){
  case uhd::rx_metadata_t::ERROR_CODE_NONE:
    break;
  case uhd::rx_metadata_t::ERROR_CODE_OVERFLOW:
    printf("[recv] USRP RX OVERFLOW!\n");
    s->num_overflows++;
    break;
  case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT:
    printf("[recv] USRP RX TIMEOUT!\n");
    break;
  default:
    printf("[recv] Unexpected error on RX, Error code: 0x%x\n",s->rx_md.error_code);
    break;
  }
knopp's avatar
   
knopp committed
317
318
319
  s->rx_count += nsamps;
  s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
  *ptimestamp = s->rx_timestamp;
navid's avatar
navid committed
320

321
322
323
324
325
326
327
328
329
330
331
332
333
334
   clock_gettime(CLOCK_MONOTONIC_RAW, &tp_end);
   time_diff = (tp_end.tv_sec - tp_start.tv_sec) *1E09  + (tp_end.tv_nsec - tp_start.tv_nsec);
   if  (time_min==0 ||loop==1 || time_min > time_diff)
     time_min=time_diff;
   if  (time_max==0 || loop==1|| time_max < time_diff)
     time_max=time_diff;
   if (time_avg ==0 ||loop==1)
     time_avg= time_diff;
   else
     time_avg=(time_diff+time_avg) /2.0;
   if ( loop % 10000==0)
     printf("\n usrp_read: min(ns)=%d, max(ns)=%d, avg(ns)=%d", (int)time_min, (int)time_max,(int)time_avg);
   loop++;
   return samples_received;
knopp's avatar
   
knopp committed
335
336
}

337
338
339
/*! \brief Get current timestamp of USRP
 * \param device the hardware to use
*/
knopp's avatar
   
knopp committed
340
341
342
343
344
345
346
347
openair0_timestamp get_usrp_time(openair0_device *device) 
{
 
  usrp_state_t *s = (usrp_state_t*)device->priv;
  
  return s->usrp->get_time_now().to_ticks(s->sample_rate);
} 

348
349
350
351
/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
knopp's avatar
   
knopp committed
352
353
354
355
static bool is_equal(double a, double b)
{
  return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
}
knopp's avatar
   
knopp committed
356

357
358
359
360
361
362
/*! \brief Set frequencies (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
 * \returns 0 in success 
 */
363
int trx_usrp_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, int dummy) {
knopp's avatar
   
knopp committed
364
365
366

  usrp_state_t *s = (usrp_state_t*)device->priv;

367
  printf("Setting USRP TX Freq %f, RX Freq %f\n",openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0]);
knopp's avatar
   
knopp committed
368
369
370
371
372
373
374
  s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[0]);
  s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[0]);

  return(0);
  
}

375
376
377
378
379
/*! \brief Set RX frequencies 
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
knopp's avatar
   
knopp committed
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) {

  usrp_state_t *s = (usrp_state_t*)device->priv;
  static int first_call=1;
  static double rf_freq,diff;

  uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);

  rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
  rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
  rf_freq=openair0_cfg[0].rx_freq[0];
  s->usrp->set_rx_freq(rx_tune_req);

  return(0);
  
}

397
398
399
400
401
/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
402
int trx_usrp_set_gains(openair0_device* device, 
403
		       openair0_config_t *openair0_cfg) {
knopp's avatar
   
knopp committed
404
405
406
407

  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[0]);
408
409
410
411
412
413
414
415
416
  ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);
  // limit to maximum gain
  if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
    
    printf("RX Gain 0 too high, reduce by %f dB\n",
	   openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());	   
    exit(-1);
  }
  s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
417
  printf("Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n", openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],openair0_cfg[0].rx_gain[0],gain_range.stop());
418

knopp's avatar
   
knopp committed
419
420
  return(0);
}
421

422
423
424
/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
425
int trx_usrp_stop(openair0_device* device) {
426
427
  return(0);
}
428

429
/*! \brief USRPB210 RX calibration table */
430
rx_gain_calib_table_t calib_table_b210[] = {
Raymond Knopp's avatar
Raymond Knopp committed
431
432
433
434
435
  {3500000000.0,44.0},
  {2660000000.0,49.0},
  {2300000000.0,50.0},
  {1880000000.0,53.0},
  {816000000.0,58.0},
436
437
  {-1,0}};

438
/*! \brief USRPB210 RX calibration table */
439
440
441
442
443
444
rx_gain_calib_table_t calib_table_b210_38[] = {
  {3500000000.0,44.0},
  {2660000000.0,49.8},
  {2300000000.0,51.0},
  {1880000000.0,53.0},
  {816000000.0,57.0},
445
446
  {-1,0}};

447
/*! \brief USRPx310 RX calibration table */
448
449
rx_gain_calib_table_t calib_table_x310[] = {
  {3500000000.0,77.0},
450
  {2660000000.0,81.0},
451
452
  {2300000000.0,81.0},
  {1880000000.0,82.0},
453
  {816000000.0,85.0},
454
455
  {-1,0}};

456
457
458
459
460
/*! \brief Set RX gain offset 
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
 * \returns 0 in success 
 */
461
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {
462
463
464

  int i=0;
  // loop through calibration table to find best adjustment factor for RX frequency
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
  double min_diff = 6e9,diff,gain_adj=0.0;
  if (bw_gain_adjust==1) {
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:      
      break;
    case 23040000:
      gain_adj=1.25;
      break;
    case 15360000:
      gain_adj=3.0;
      break;
    case 7680000:
      gain_adj=6.0;
      break;
    case 3840000:
      gain_adj=9.0;
      break;
    case 1920000:
      gain_adj=12.0;
      break;
    default:
      printf("unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
491
492
  while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
    diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
493
    printf("cal %d: freq %f, offset %f, diff %f\n",
494
495
496
	   i,
	   openair0_cfg->rx_gain_calib_table[i].freq,
	   openair0_cfg->rx_gain_calib_table[i].offset,diff);
497
498
    if (min_diff > diff) {
      min_diff = diff;
499
      openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
500
501
502
503
504
505
    }
    i++;
  }
  
}

506
507
508
509
/*! \brief print the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
510
int trx_usrp_get_stats(openair0_device* device) {
511

512
513
514
  return(0);

}
515
516
517
518
519

/*! \brief Reset the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
520
int trx_usrp_reset_stats(openair0_device* device) {
521
522
523
524

  return(0);

}
525

526

527

528
extern "C" {
529
530
531
532
/*! \brief Initialize Openair USRP target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
533
  int device_init(openair0_device* device, openair0_config_t *openair0_cfg) {
534
    
535
536
537
538
539
    uhd::set_thread_priority_safe(1.0);
    usrp_state_t *s = (usrp_state_t*)malloc(sizeof(usrp_state_t));
    memset(s, 0, sizeof(usrp_state_t));
    
    // Initialize USRP device
knopp's avatar
   
knopp committed
540

541
  device->openair0_cfg = openair0_cfg;
knopp's avatar
   
knopp committed
542

knopp's avatar
   
knopp committed
543
  std::string args = "type=b200";
knopp's avatar
knopp committed
544
545


knopp's avatar
   
knopp committed
546
  uhd::device_addrs_t device_adds = uhd::device::find(args);
knopp's avatar
   
knopp committed
547
  size_t i;
548
549
550
551
552
  
  int vers=0,subvers=0,subsubvers=0;
  int bw_gain_adjust=0;

  sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
knopp's avatar
   
knopp committed
553

554
  printf("Checking for USRPs : UHD %s (%d.%d.%d)\n",uhd::get_version_string().c_str(),vers,subvers,subsubvers);
555
  
knopp's avatar
   
knopp committed
556
557
  if(device_adds.size() == 0)
  {
558
559
560
561
562
563
564
    double usrp_master_clock = 184.32e6;

    std::string args = "type=x300";
    
    // workaround for an api problem, master clock has to be set with the constructor not via set_master_clock_rate
    args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
    
565
566
    args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=4096, recv_frame_size=4096";
    
567
    uhd::device_addrs_t device_adds = uhd::device::find(args);
knopp's avatar
   
knopp committed
568

569
570
571
572
573
    if(device_adds.size() == 0)
    {
      std::cerr<<"No USRP Device Found. " << std::endl;
      free(s);
      return -1;
knopp's avatar
knopp committed
574

575
    }
knopp's avatar
knopp committed
576

577

578
579
580
581
582
583
584
585
    printf("Found USRP X300\n");
    s->usrp = uhd::usrp::multi_usrp::make(args);
    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);

    // lock mboard clocks
    s->usrp->set_clock_source("internal");
    
586
    //Setting device type to USRP X300/X310 
587
    device->type=USRP_X300_DEV;
588

589
590
591
    // this is not working yet, master clock has to be set via constructor
    // set master clock rate and sample rate for tx & rx for streaming
    //s->usrp->set_master_clock_rate(usrp_master_clock);
592
593

    openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
594
    
595
596
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
597
            // from usrp_time_offset
598
      //openair0_cfg[0].samples_per_packet    = 2048;
599
      openair0_cfg[0].tx_sample_advance     = 15;
600
601
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
602
      break;
603
    case 15360000:
604
      //openair0_cfg[0].samples_per_packet    = 2048;
605
      openair0_cfg[0].tx_sample_advance     = 45;
606
607
      openair0_cfg[0].tx_bw                 = 10e6;
      openair0_cfg[0].rx_bw                 = 10e6;
608
      break;
609
    case 7680000:
610
      //openair0_cfg[0].samples_per_packet    = 2048;
611
      openair0_cfg[0].tx_sample_advance     = 50;
612
613
      openair0_cfg[0].tx_bw                 = 5e6;
      openair0_cfg[0].rx_bw                 = 5e6;
614
      break;
615
    case 1920000:
616
      //openair0_cfg[0].samples_per_packet    = 2048;
617
      openair0_cfg[0].tx_sample_advance     = 50;
618
619
      openair0_cfg[0].tx_bw                 = 1.25e6;
      openair0_cfg[0].rx_bw                 = 1.25e6;
620
621
622
623
624
625
626
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }

627
628
  } else {
    printf("Found USRP B200");
629
    args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=4096, recv_frame_size=4096" ; 
630
631
632
633
    s->usrp = uhd::usrp::multi_usrp::make(args);

    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);
634
635
636
637
    
    // do not explicitly set the clock to "internal", because this will disable the gpsdo
    //    // lock mboard clocks
    //    s->usrp->set_clock_source("internal");
638
    // set master clock rate and sample rate for tx & rx for streaming
639

640
    device->type = USRP_B200_DEV;
641

knopp's avatar
knopp committed
642

643
644
645
646
647
648
649
650
    if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
      bw_gain_adjust=0;
    }
    else {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
      bw_gain_adjust=1;
    }
651

652
653
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
654
      s->usrp->set_master_clock_rate(30.72e6);
655
      //openair0_cfg[0].samples_per_packet    = 1024;
656
      openair0_cfg[0].tx_sample_advance     = 115;
657
658
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
659
      break;
660
    case 23040000:
661
      s->usrp->set_master_clock_rate(23.04e6); //to be checked
662
      //openair0_cfg[0].samples_per_packet    = 1024;
663
      openair0_cfg[0].tx_sample_advance     = 113;
664
665
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
666
      break;
667
    case 15360000:
668
      s->usrp->set_master_clock_rate(30.72e06);
669
      //openair0_cfg[0].samples_per_packet    = 1024;
670
      openair0_cfg[0].tx_sample_advance     = 103; 
671
672
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
673
      break;
674
    case 7680000:
Rohit Gupta's avatar
Rohit Gupta committed
675
      s->usrp->set_master_clock_rate(30.72e6);
676
      //openair0_cfg[0].samples_per_packet    = 1024;
677
      openair0_cfg[0].tx_sample_advance     = 80;
678
679
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
680
      break;
681
    case 1920000:
682
      s->usrp->set_master_clock_rate(30.72e6);
683
      //openair0_cfg[0].samples_per_packet    = 1024;
684
      openair0_cfg[0].tx_sample_advance     = 40;
685
686
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
687
688
689
690
691
692
693
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
knopp's avatar
knopp committed
694

695
  /* device specific */
696
697
  //openair0_cfg[0].txlaunch_wait = 1;//manage when TX processing is triggered
  //openair0_cfg[0].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
698
699
  openair0_cfg[0].iq_txshift = 4;//shift
  openair0_cfg[0].iq_rxrescale = 15;//rescale iqs
700
  
knopp's avatar
   
knopp committed
701
  for(i=0;i<s->usrp->get_rx_num_channels();i++) {
knopp's avatar
   
knopp committed
702
    if (i<openair0_cfg[0].rx_num_channels) {
knopp's avatar
knopp committed
703
      s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
704
705
      //s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
      //printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
knopp's avatar
knopp committed
706
      s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
707
      set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
708
709
710
711
712
713
714
715
716
717
718
719

      ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
      // limit to maximum gain
      if (openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] > gain_range.stop()) {
	
        printf("RX Gain %lu too high, lower by %f dB\n",i,openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop());
	exit(-1);
      }
      s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i);
      printf("RX Gain %lu %f (%f) => %f (max %f)\n",i,
	     openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
	     openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
knopp's avatar
   
knopp committed
720
721
    }
  }
knopp's avatar
   
knopp committed
722
  for(i=0;i<s->usrp->get_tx_num_channels();i++) {
knopp's avatar
   
knopp committed
723
    if (i<openair0_cfg[0].tx_num_channels) {
knopp's avatar
knopp committed
724
      s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
725
726
      //s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
      //printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
knopp's avatar
knopp committed
727
728
      s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
      s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
knopp's avatar
   
knopp committed
729
730
    }
  }
knopp's avatar
knopp committed
731
732


knopp's avatar
   
knopp committed
733
734
  // display USRP settings
  std::cout << boost::format("Actual master clock: %fMHz...") % (s->usrp->get_master_clock_rate()/1e6) << std::endl;
735
736
  
  sleep(1);
knopp's avatar
   
knopp committed
737
738

  // create tx & rx streamer
knopp's avatar
   
knopp committed
739
  uhd::stream_args_t stream_args_rx("sc16", "sc16");
knopp's avatar
   
knopp committed
740
  //stream_args_rx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].rx_num_channels*openair0_cfg[0].samples_per_packet));
knopp's avatar
   
knopp committed
741
  for (i = 0; i<openair0_cfg[0].rx_num_channels; i++)
knopp's avatar
   
knopp committed
742
743
744
745
746
747
748
    stream_args_rx.channels.push_back(i);
  s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
  std::cout << boost::format("rx_max_num_samps %u") % (s->rx_stream->get_max_num_samps()) << std::endl;
  //openair0_cfg[0].samples_per_packet = s->rx_stream->get_max_num_samps();

  uhd::stream_args_t stream_args_tx("sc16", "sc16");
  //stream_args_tx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].tx_num_channels*openair0_cfg[0].samples_per_packet));
knopp's avatar
   
knopp committed
749
  for (i = 0; i<openair0_cfg[0].tx_num_channels; i++)
knopp's avatar
   
knopp committed
750
751
      stream_args_tx.channels.push_back(i);
  s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);
knopp's avatar
   
knopp committed
752
753
  std::cout << boost::format("tx_max_num_samps %u") % (s->tx_stream->get_max_num_samps()) << std::endl;

knopp's avatar
   
knopp committed
754

755
756
757
758
759
 /* Setting TX/RX BW after streamers are created due to USRP calibration issue */
  for(i=0;i<s->usrp->get_tx_num_channels();i++) {
    if (i<openair0_cfg[0].tx_num_channels) {
      s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
      printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
Rohit Gupta's avatar
Rohit Gupta committed
760
761
762
763
764
    }
  }
  for(i=0;i<s->usrp->get_rx_num_channels();i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
      s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
765
766
767
768
      printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
    }
  }

knopp's avatar
   
knopp committed
769
  s->usrp->set_time_now(uhd::time_spec_t(0.0));
770
 
771

knopp's avatar
knopp committed
772
773
  for (i=0;i<openair0_cfg[0].rx_num_channels;i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
knopp's avatar
   
knopp committed
774
      printf("RX Channel %lu\n",i);
knopp's avatar
knopp committed
775
776
777
778
779
780
781
782
783
784
785
      std::cout << boost::format("Actual RX sample rate: %fMSps...") % (s->usrp->get_rx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX frequency: %fGHz...") % (s->usrp->get_rx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual RX gain: %f...") % (s->usrp->get_rx_gain(i)) << std::endl;
      std::cout << boost::format("Actual RX bandwidth: %fM...") % (s->usrp->get_rx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX antenna: %s...") % (s->usrp->get_rx_antenna(i)) << std::endl;
    }
  }

  for (i=0;i<openair0_cfg[0].tx_num_channels;i++) {

    if (i<openair0_cfg[0].tx_num_channels) { 
knopp's avatar
   
knopp committed
786
      printf("TX Channel %lu\n",i);
knopp's avatar
knopp committed
787
788
789
790
791
792
793
794
      std::cout << std::endl<<boost::format("Actual TX sample rate: %fMSps...") % (s->usrp->get_tx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX frequency: %fGHz...") % (s->usrp->get_tx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual TX gain: %f...") % (s->usrp->get_tx_gain(i)) << std::endl;
      std::cout << boost::format("Actual TX bandwidth: %fM...") % (s->usrp->get_tx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX antenna: %s...") % (s->usrp->get_tx_antenna(i)) << std::endl;
    }
  }

knopp's avatar
   
knopp committed
795
  std::cout << boost::format("Device timestamp: %f...") % (s->usrp->get_time_now().get_real_secs()) << std::endl;
knopp's avatar
   
knopp committed
796
797
798
799

  device->priv = s;
  device->trx_start_func = trx_usrp_start;
  device->trx_write_func = trx_usrp_write;
800
801
802
803
804
805
806
  device->trx_read_func  = trx_usrp_read;
  device->trx_get_stats_func = trx_usrp_get_stats;
  device->trx_reset_stats_func = trx_usrp_reset_stats;
  device->trx_end_func   = trx_usrp_end;
  device->trx_stop_func  = trx_usrp_stop;
  device->trx_set_freq_func = trx_usrp_set_freq;
  device->trx_set_gains_func   = trx_usrp_set_gains;
807
808
  device->openair0_cfg = openair0_cfg;

knopp's avatar
knopp committed
809
  s->sample_rate = openair0_cfg[0].sample_rate;
knopp's avatar
   
knopp committed
810
811
812
813
814
815
816
817
818
  // TODO:
  // init tx_forward_nsamps based usrp_time_offset ex
  if(is_equal(s->sample_rate, (double)30.72e6))
    s->tx_forward_nsamps  = 176;
  if(is_equal(s->sample_rate, (double)15.36e6))
    s->tx_forward_nsamps = 90;
  if(is_equal(s->sample_rate, (double)7.68e6))
    s->tx_forward_nsamps = 50;
  return 0;
819
  }
knopp's avatar
   
knopp committed
820
}
821
/*@}*/