usrp_lib.cpp 27.4 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
/*******************************************************************************
    OpenAirInterface 
    Copyright(c) 1999 - 2014 Eurecom

    OpenAirInterface is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.


    OpenAirInterface is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with OpenAirInterface.The full GNU General Public License is 
    included in this distribution in the file called "COPYING". If not, 
    see <http://www.gnu.org/licenses/>.

   Contact Information
   OpenAirInterface Admin: openair_admin@eurecom.fr
   OpenAirInterface Tech : openair_tech@eurecom.fr
24
   OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
25
  
ghaddab's avatar
ghaddab committed
26
   Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
27 28

 *******************************************************************************/
knopp's avatar
 
knopp committed
29 30 31

/** usrp_lib.cpp
 *
32
 * \author: HongliangXU : hong-liang-xu@agilent.com
knopp's avatar
 
knopp committed
33 34 35 36 37 38 39 40
 */

#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
#include <uhd/utils/thread_priority.hpp>
#include <uhd/usrp/multi_usrp.hpp>
41
#include <uhd/version.hpp>
knopp's avatar
 
knopp committed
42 43 44 45 46 47
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
48
#include <time.h>
Rohit Gupta's avatar
Rohit Gupta committed
49
#include "UTIL/LOG/log_extern.h"
knopp's avatar
 
knopp committed
50
#include "common_lib.h"
51 52 53 54 55 56 57
#ifdef __SSE4_1__
#  include <smmintrin.h>
#endif
 
#ifdef __AVX2__
#  include <immintrin.h>
#endif
58

59 60 61 62
#ifdef __arm__
#  include <arm_neon.h>
#endif

63 64 65 66 67
/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */

/*! \brief USRP Configuration */ 
knopp's avatar
 
knopp committed
68 69 70 71 72 73
typedef struct
{

  // --------------------------------
  // variables for USRP configuration
  // --------------------------------
74
  //! USRP device pointer
knopp's avatar
 
knopp committed
75 76
  uhd::usrp::multi_usrp::sptr usrp;
  //uhd::usrp::multi_usrp::sptr rx_usrp;
77
  
knopp's avatar
 
knopp committed
78
  //create a send streamer and a receive streamer
79
  //! USRP TX Stream
knopp's avatar
 
knopp committed
80
  uhd::tx_streamer::sptr tx_stream;
81
  //! USRP RX Stream
knopp's avatar
 
knopp committed
82 83
  uhd::rx_streamer::sptr rx_stream;

84
  //! USRP TX Metadata
knopp's avatar
 
knopp committed
85
  uhd::tx_metadata_t tx_md;
86
  //! USRP RX Metadata
knopp's avatar
 
knopp committed
87 88
  uhd::rx_metadata_t rx_md;

89
  //! USRP Timestamp Information
knopp's avatar
 
knopp committed
90
  uhd::time_spec_t tm_spec;
91

knopp's avatar
 
knopp committed
92
  //setup variables and allocate buffer
93
  //! USRP Metadata
knopp's avatar
 
knopp committed
94 95
  uhd::async_metadata_t async_md;

96
  //! Sampling rate
knopp's avatar
 
knopp committed
97
  double sample_rate;
98 99

  //! time offset between transmiter timestamp and receiver timestamp;
knopp's avatar
 
knopp committed
100
  double tdiff;
101 102

  //! TX forward samples. We use usrp_time_offset to get this value
knopp's avatar
 
knopp committed
103 104 105 106 107 108
  int tx_forward_nsamps; //166 for 20Mhz


  // --------------------------------
  // Debug and output control
  // --------------------------------
109
  //! Number of underflows
knopp's avatar
 
knopp committed
110
  int num_underflows;
111
  //! Number of overflows
knopp's avatar
 
knopp committed
112
  int num_overflows;
113 114
  
  //! Number of sequential errors
knopp's avatar
 
knopp committed
115
  int num_seq_errors;
116
  //! tx count
knopp's avatar
 
knopp committed
117
  int64_t tx_count;
118
  //! rx count
knopp's avatar
 
knopp committed
119
  int64_t rx_count;
120
  //! timestamp of RX packet
knopp's avatar
 
knopp committed
121 122 123 124
  openair0_timestamp rx_timestamp;

} usrp_state_t;

125 126 127
/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
knopp's avatar
 
knopp committed
128 129 130 131 132 133
static int trx_usrp_start(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  // init recv and send streaming
  uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
knopp's avatar
 
knopp committed
134
  cmd.time_spec = s->usrp->get_time_now() + uhd::time_spec_t(0.05);
knopp's avatar
 
knopp committed
135 136 137
  cmd.stream_now = false; // start at constant delay
  s->rx_stream->issue_stream_cmd(cmd);

knopp's avatar
 
knopp committed
138
  s->tx_md.time_spec = cmd.time_spec + uhd::time_spec_t(1-(double)s->tx_forward_nsamps/s->sample_rate);
knopp's avatar
 
knopp committed
139 140 141 142 143 144 145 146
  s->tx_md.has_time_spec = true;
  s->tx_md.start_of_burst = true;
  s->tx_md.end_of_burst = false;


  s->rx_count = 0;
  s->tx_count = 0;
  s->rx_timestamp = 0;
147 148

  return 0;
knopp's avatar
 
knopp committed
149
}
150 151 152
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources 
 * \param device the hardware to use
 */
knopp's avatar
 
knopp committed
153 154 155 156 157 158
static void trx_usrp_end(openair0_device *device)
{
  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->rx_stream->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);

navid's avatar
navid committed
159 160 161 162 163
  //send a mini EOB packet
  s->tx_md.end_of_burst = true;
  s->tx_stream->send("", 0, s->tx_md);
  s->tx_md.end_of_burst = false;
  
knopp's avatar
 
knopp committed
164
}
165

166 167 168 169 170 171 172 173
/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
      @param timestamp The timestamp at whicch the first sample MUST be sent 
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
      @param antenna_id index of the antenna if the device has multiple anteannas
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
*/ 
174
static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags)
knopp's avatar
 
knopp committed
175
{
176 177 178 179 180 181 182
   static long long int loop=0;
   static long time_min=0, time_max=0, time_avg=0;
   struct timespec tp_start, tp_end;
   long time_diff;
   clock_gettime(CLOCK_MONOTONIC_RAW, &tp_start);

  int ret=0, ret_i=0;
knopp's avatar
 
knopp committed
183
  usrp_state_t *s = (usrp_state_t*)device->priv;
knopp's avatar
knopp committed
184

185
  s->tx_md.time_spec = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
knopp's avatar
knopp committed
186

187
  
knopp's avatar
 
knopp committed
188 189 190 191
  if(flags)
    s->tx_md.has_time_spec = true;
  else
    s->tx_md.has_time_spec = false;
192
  
knopp's avatar
knopp committed
193 194 195
  if (cc>1) {
    std::vector<void *> buff_ptrs;
    for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
196
    ret = (int)s->tx_stream->send(buff_ptrs, nsamps, s->tx_md,1e-3);
knopp's avatar
knopp committed
197 198
  }
  else
199 200
    ret = (int)s->tx_stream->send(buff[0], nsamps, s->tx_md,1e-3);

knopp's avatar
 
knopp committed
201
  s->tx_md.start_of_burst = false;
202

203 204 205
  if (ret != nsamps) {
    printf("[xmit] tx samples %d != %d\n",ret,nsamps);
  }
206 207 208 209 210 211 212 213 214 215 216

  clock_gettime(CLOCK_MONOTONIC_RAW, &tp_end);
  time_diff = (tp_end.tv_sec - tp_start.tv_sec) *1E09  + (tp_end.tv_nsec - tp_start.tv_nsec);
  if  (time_min==0 ||loop==1 || time_min > time_diff)
    time_min=time_diff;
  if  (time_max==0 ||loop==1 || time_max < time_diff)
    time_max=time_diff;
  if (time_avg ==0 ||loop==1)
    time_avg= time_diff;
  else
    time_avg=(time_diff+time_avg) /2.0;
Rohit Gupta's avatar
Rohit Gupta committed
217 218 219 220 221

   //prints statics of uhd every 10 seconds
   if ( loop % (10 * ((int)device->openair0_cfg[0].sample_rate /(int)nsamps )) ==0)
     LOG_I(HW,"usrp_write: min(ns)=%d, max(ns)=%d, avg(ns)=%d\n", (int)time_min, (int)time_max,(int)time_avg);

222
   loop++;
223
  return ret;
knopp's avatar
 
knopp committed
224 225
}

226 227 228 229 230 231 232 233 234 235 236
/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
knopp's avatar
 
knopp committed
237
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc)
knopp's avatar
 
knopp committed
238
{
239 240 241 242 243
   static long long int loop=0;
   static long time_min=0, time_max=0, time_avg=0;
   struct timespec tp_start, tp_end;
   long time_diff;
   clock_gettime(CLOCK_MONOTONIC_RAW, &tp_start);
244 245 246 247 248 249
   usrp_state_t *s = (usrp_state_t*)device->priv;
   int samples_received=0,i,j;
   int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
   nsamps2 = (nsamps+7)>>3;
250
   __m256i buff_tmp[2][nsamps2];
251 252
#else
   nsamps2 = (nsamps+3)>>2;
253
   __m128i buff_tmp[2][nsamps2];
254 255 256
#endif
#elif defined(__arm__)
   nsamps2 = (nsamps+3)>>2;
257
   int16x8_t buff_tmp[2][nsamps2];
258 259
#endif

knopp's avatar
 
knopp committed
260

261
  if (device->type == USRP_B200_DEV) {  
262
    if (cc>1) {
gauthier's avatar
gauthier committed
263
    // receive multiple channels (e.g. RF A and RF B)
264
      std::vector<void *> buff_ptrs;
265
 
266 267 268
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff_tmp[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
gauthier's avatar
gauthier committed
269
    // receive a single channel (e.g. from connector RF A)
270 271
      samples_received = s->rx_stream->recv(buff_tmp[0], nsamps, s->rx_md);
    }
272

273
  // bring RX data into 12 LSBs for softmodem RX
274 275
    for (int i=0;i<cc;i++) {
      for (int j=0; j<nsamps2; j++) {      
276 277
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
278
        ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
279
#else
280
        ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
281 282
#endif
#elif defined(__arm__)
283
        ((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
284
#endif
285
      }
286
    }
287
  } else if (device->type == USRP_X300_DEV) {
288
    if (cc>1) { 
289 290 291 292 293 294 295 296
    // receive multiple channels (e.g. RF A and RF B)
      std::vector<void *> buff_ptrs;
 
      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
    } else {
    // receive a single channel (e.g. from connector RF A)
      samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
navid's avatar
navid committed
297
    }
298
  }
299

knopp's avatar
 
knopp committed
300 301 302 303
  if (samples_received < nsamps) {
    printf("[recv] received %d samples out of %d\n",samples_received,nsamps);
    
  }
navid's avatar
navid committed
304

knopp's avatar
 
knopp committed
305 306 307 308 309 310 311 312 313 314 315 316 317 318 319
  //handle the error code
  switch(s->rx_md.error_code){
  case uhd::rx_metadata_t::ERROR_CODE_NONE:
    break;
  case uhd::rx_metadata_t::ERROR_CODE_OVERFLOW:
    printf("[recv] USRP RX OVERFLOW!\n");
    s->num_overflows++;
    break;
  case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT:
    printf("[recv] USRP RX TIMEOUT!\n");
    break;
  default:
    printf("[recv] Unexpected error on RX, Error code: 0x%x\n",s->rx_md.error_code);
    break;
  }
knopp's avatar
 
knopp committed
320 321 322
  s->rx_count += nsamps;
  s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
  *ptimestamp = s->rx_timestamp;
navid's avatar
navid committed
323

Rohit Gupta's avatar
Rohit Gupta committed
324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340
  clock_gettime(CLOCK_MONOTONIC_RAW, &tp_end);
  time_diff = (tp_end.tv_sec - tp_start.tv_sec) *1E09  + (tp_end.tv_nsec - tp_start.tv_nsec);
  if  (time_min==0 ||loop==1 || time_min > time_diff)
    time_min=time_diff;
  if  (time_max==0 ||loop==1 || time_max < time_diff)
    time_max=time_diff;
  if (time_avg ==0 ||loop==1)
    time_avg= time_diff;
  else
    time_avg=(time_diff+time_avg) /2.0;

  //prints statics of uhd every 10 seconds
  if ( loop % (10 * ((int)device->openair0_cfg[0].sample_rate /(int)nsamps )) ==0)
     LOG_I(HW,"usrp_read: min(ns)=%d, max(ns)=%d, avg(ns)=%d\n", (int)time_min, (int)time_max,(int)time_avg);

  loop++;
  return samples_received;
knopp's avatar
 
knopp committed
341 342
}

343 344 345
/*! \brief Get current timestamp of USRP
 * \param device the hardware to use
*/
knopp's avatar
 
knopp committed
346 347 348 349 350 351 352 353
openair0_timestamp get_usrp_time(openair0_device *device) 
{
 
  usrp_state_t *s = (usrp_state_t*)device->priv;
  
  return s->usrp->get_time_now().to_ticks(s->sample_rate);
} 

354 355 356 357
/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
knopp's avatar
 
knopp committed
358 359 360 361
static bool is_equal(double a, double b)
{
  return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
}
knopp's avatar
 
knopp committed
362

363 364 365 366 367 368
/*! \brief Set frequencies (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
 * \returns 0 in success 
 */
369
int trx_usrp_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, int dummy) {
knopp's avatar
 
knopp committed
370 371 372

  usrp_state_t *s = (usrp_state_t*)device->priv;

373
  printf("Setting USRP TX Freq %f, RX Freq %f\n",openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0]);
knopp's avatar
 
knopp committed
374 375 376 377 378 379 380
  s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[0]);
  s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[0]);

  return(0);
  
}

381 382 383 384 385
/*! \brief Set RX frequencies 
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
knopp's avatar
 
knopp committed
386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) {

  usrp_state_t *s = (usrp_state_t*)device->priv;
  static int first_call=1;
  static double rf_freq,diff;

  uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);

  rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
  rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
  rf_freq=openair0_cfg[0].rx_freq[0];
  s->usrp->set_rx_freq(rx_tune_req);

  return(0);
  
}

403 404 405 406 407
/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \returns 0 in success 
 */
408
int trx_usrp_set_gains(openair0_device* device, 
409
		       openair0_config_t *openair0_cfg) {
knopp's avatar
 
knopp committed
410 411 412 413

  usrp_state_t *s = (usrp_state_t*)device->priv;

  s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[0]);
414 415 416 417 418 419 420 421 422
  ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);
  // limit to maximum gain
  if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
    
    printf("RX Gain 0 too high, reduce by %f dB\n",
	   openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());	   
    exit(-1);
  }
  s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
423
  printf("Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n", openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],openair0_cfg[0].rx_gain[0],gain_range.stop());
424

knopp's avatar
 
knopp committed
425 426
  return(0);
}
427

428 429 430
/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
431
int trx_usrp_stop(openair0_device* device) {
432 433
  return(0);
}
434

435
/*! \brief USRPB210 RX calibration table */
436
rx_gain_calib_table_t calib_table_b210[] = {
Raymond Knopp's avatar
Raymond Knopp committed
437 438 439 440 441
  {3500000000.0,44.0},
  {2660000000.0,49.0},
  {2300000000.0,50.0},
  {1880000000.0,53.0},
  {816000000.0,58.0},
442 443
  {-1,0}};

444
/*! \brief USRPB210 RX calibration table */
445 446 447 448 449 450
rx_gain_calib_table_t calib_table_b210_38[] = {
  {3500000000.0,44.0},
  {2660000000.0,49.8},
  {2300000000.0,51.0},
  {1880000000.0,53.0},
  {816000000.0,57.0},
451 452
  {-1,0}};

453
/*! \brief USRPx310 RX calibration table */
454 455
rx_gain_calib_table_t calib_table_x310[] = {
  {3500000000.0,77.0},
456
  {2660000000.0,81.0},
457 458
  {2300000000.0,81.0},
  {1880000000.0,82.0},
459
  {816000000.0,85.0},
460 461
  {-1,0}};

462 463 464 465 466
/*! \brief Set RX gain offset 
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
 * \returns 0 in success 
 */
467
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {
468 469 470

  int i=0;
  // loop through calibration table to find best adjustment factor for RX frequency
471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496
  double min_diff = 6e9,diff,gain_adj=0.0;
  if (bw_gain_adjust==1) {
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:      
      break;
    case 23040000:
      gain_adj=1.25;
      break;
    case 15360000:
      gain_adj=3.0;
      break;
    case 7680000:
      gain_adj=6.0;
      break;
    case 3840000:
      gain_adj=9.0;
      break;
    case 1920000:
      gain_adj=12.0;
      break;
    default:
      printf("unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
497 498
  while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
    diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
499
    printf("cal %d: freq %f, offset %f, diff %f\n",
500 501 502
	   i,
	   openair0_cfg->rx_gain_calib_table[i].freq,
	   openair0_cfg->rx_gain_calib_table[i].offset,diff);
503 504
    if (min_diff > diff) {
      min_diff = diff;
505
      openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
506 507 508 509 510 511
    }
    i++;
  }
  
}

512 513 514 515
/*! \brief print the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
516
int trx_usrp_get_stats(openair0_device* device) {
517

518 519 520
  return(0);

}
521 522 523 524 525

/*! \brief Reset the USRP statistics  
* \param device the hardware to use
* \returns  0 on success
*/
526
int trx_usrp_reset_stats(openair0_device* device) {
527 528 529 530

  return(0);

}
531

532

533

534
extern "C" {
535 536 537 538
/*! \brief Initialize Openair USRP target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
539
  int device_init(openair0_device* device, openair0_config_t *openair0_cfg) {
540
    
541 542 543 544 545
    uhd::set_thread_priority_safe(1.0);
    usrp_state_t *s = (usrp_state_t*)malloc(sizeof(usrp_state_t));
    memset(s, 0, sizeof(usrp_state_t));
    
    // Initialize USRP device
knopp's avatar
 
knopp committed
546

547
  device->openair0_cfg = openair0_cfg;
knopp's avatar
 
knopp committed
548

knopp's avatar
 
knopp committed
549
  std::string args = "type=b200";
knopp's avatar
knopp committed
550 551


knopp's avatar
 
knopp committed
552
  uhd::device_addrs_t device_adds = uhd::device::find(args);
knopp's avatar
 
knopp committed
553
  size_t i;
554 555 556 557 558
  
  int vers=0,subvers=0,subsubvers=0;
  int bw_gain_adjust=0;

  sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
knopp's avatar
 
knopp committed
559

560
  printf("Checking for USRPs : UHD %s (%d.%d.%d)\n",uhd::get_version_string().c_str(),vers,subvers,subsubvers);
561
  
knopp's avatar
 
knopp committed
562 563
  if(device_adds.size() == 0)
  {
564 565 566 567 568 569 570
    double usrp_master_clock = 184.32e6;

    std::string args = "type=x300";
    
    // workaround for an api problem, master clock has to be set with the constructor not via set_master_clock_rate
    args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
    
knopp's avatar
knopp committed
571
//    args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=4096, recv_frame_size=4096";
572
    
573
    uhd::device_addrs_t device_adds = uhd::device::find(args);
knopp's avatar
 
knopp committed
574

575 576 577 578 579
    if(device_adds.size() == 0)
    {
      std::cerr<<"No USRP Device Found. " << std::endl;
      free(s);
      return -1;
knopp's avatar
knopp committed
580

581
    }
knopp's avatar
knopp committed
582

583

584 585 586 587 588 589 590 591
    printf("Found USRP X300\n");
    s->usrp = uhd::usrp::multi_usrp::make(args);
    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);

    // lock mboard clocks
    s->usrp->set_clock_source("internal");
    
592
    //Setting device type to USRP X300/X310 
593
    device->type=USRP_X300_DEV;
594

595 596 597
    // this is not working yet, master clock has to be set via constructor
    // set master clock rate and sample rate for tx & rx for streaming
    //s->usrp->set_master_clock_rate(usrp_master_clock);
598 599

    openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
600
    
601 602
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
603
            // from usrp_time_offset
604
      //openair0_cfg[0].samples_per_packet    = 2048;
605
      openair0_cfg[0].tx_sample_advance     = 15;
606 607
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
608
      break;
609
    case 15360000:
610
      //openair0_cfg[0].samples_per_packet    = 2048;
611
      openair0_cfg[0].tx_sample_advance     = 45;
612 613
      openair0_cfg[0].tx_bw                 = 10e6;
      openair0_cfg[0].rx_bw                 = 10e6;
614
      break;
615
    case 7680000:
616
      //openair0_cfg[0].samples_per_packet    = 2048;
617
      openair0_cfg[0].tx_sample_advance     = 50;
618 619
      openair0_cfg[0].tx_bw                 = 5e6;
      openair0_cfg[0].rx_bw                 = 5e6;
620
      break;
621
    case 1920000:
622
      //openair0_cfg[0].samples_per_packet    = 2048;
623
      openair0_cfg[0].tx_sample_advance     = 50;
624 625
      openair0_cfg[0].tx_bw                 = 1.25e6;
      openair0_cfg[0].rx_bw                 = 1.25e6;
626 627 628 629 630 631 632
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }

633 634
  } else {
    printf("Found USRP B200");
635
    args += ",num_send_frames=256,num_recv_frames=256, send_frame_size=4096, recv_frame_size=4096" ; 
636 637 638 639
    s->usrp = uhd::usrp::multi_usrp::make(args);

    //  s->usrp->set_rx_subdev_spec(rx_subdev);
    //  s->usrp->set_tx_subdev_spec(tx_subdev);
640 641 642 643
    
    // do not explicitly set the clock to "internal", because this will disable the gpsdo
    //    // lock mboard clocks
    //    s->usrp->set_clock_source("internal");
644
    // set master clock rate and sample rate for tx & rx for streaming
645

646
    device->type = USRP_B200_DEV;
647

knopp's avatar
knopp committed
648

649 650 651 652 653 654 655 656
    if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
      bw_gain_adjust=0;
    }
    else {
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
      bw_gain_adjust=1;
    }
657

658 659
    switch ((int)openair0_cfg[0].sample_rate) {
    case 30720000:
660
      s->usrp->set_master_clock_rate(30.72e6);
661
      //openair0_cfg[0].samples_per_packet    = 1024;
662
      openair0_cfg[0].tx_sample_advance     = 115;
663 664
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
665
      break;
666
    case 23040000:
667
      s->usrp->set_master_clock_rate(23.04e6); //to be checked
668
      //openair0_cfg[0].samples_per_packet    = 1024;
669
      openair0_cfg[0].tx_sample_advance     = 113;
670 671
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
672
      break;
673
    case 15360000:
674
      s->usrp->set_master_clock_rate(30.72e06);
675
      //openair0_cfg[0].samples_per_packet    = 1024;
676
      openair0_cfg[0].tx_sample_advance     = 103; 
677 678
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
679
      break;
680
    case 7680000:
Rohit Gupta's avatar
Rohit Gupta committed
681
      s->usrp->set_master_clock_rate(30.72e6);
682
      //openair0_cfg[0].samples_per_packet    = 1024;
683
      openair0_cfg[0].tx_sample_advance     = 80;
684 685
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
686
      break;
687
    case 1920000:
688
      s->usrp->set_master_clock_rate(30.72e6);
689
      //openair0_cfg[0].samples_per_packet    = 1024;
690
      openair0_cfg[0].tx_sample_advance     = 40;
691 692
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
693 694 695 696 697 698 699
      break;
    default:
      printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
      exit(-1);
      break;
    }
  }
knopp's avatar
knopp committed
700

701
  /* device specific */
702 703
  //openair0_cfg[0].txlaunch_wait = 1;//manage when TX processing is triggered
  //openair0_cfg[0].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
704 705
  openair0_cfg[0].iq_txshift = 4;//shift
  openair0_cfg[0].iq_rxrescale = 15;//rescale iqs
706
  
knopp's avatar
 
knopp committed
707
  for(i=0;i<s->usrp->get_rx_num_channels();i++) {
knopp's avatar
 
knopp committed
708
    if (i<openair0_cfg[0].rx_num_channels) {
knopp's avatar
knopp committed
709
      s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
710 711
      //s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
      //printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
knopp's avatar
knopp committed
712
      s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
713
      set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
714 715 716 717 718 719 720 721 722 723 724 725

      ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
      // limit to maximum gain
      if (openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] > gain_range.stop()) {
	
        printf("RX Gain %lu too high, lower by %f dB\n",i,openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop());
	exit(-1);
      }
      s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i);
      printf("RX Gain %lu %f (%f) => %f (max %f)\n",i,
	     openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
	     openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
knopp's avatar
 
knopp committed
726 727
    }
  }
knopp's avatar
 
knopp committed
728
  for(i=0;i<s->usrp->get_tx_num_channels();i++) {
knopp's avatar
 
knopp committed
729
    if (i<openair0_cfg[0].tx_num_channels) {
knopp's avatar
knopp committed
730
      s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
731 732
      //s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
      //printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
knopp's avatar
knopp committed
733 734
      s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
      s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
knopp's avatar
 
knopp committed
735 736
    }
  }
knopp's avatar
knopp committed
737 738


knopp's avatar
 
knopp committed
739 740
  // display USRP settings
  std::cout << boost::format("Actual master clock: %fMHz...") % (s->usrp->get_master_clock_rate()/1e6) << std::endl;
741 742
  
  sleep(1);
knopp's avatar
 
knopp committed
743 744

  // create tx & rx streamer
knopp's avatar
 
knopp committed
745
  uhd::stream_args_t stream_args_rx("sc16", "sc16");
knopp's avatar
 
knopp committed
746
  //stream_args_rx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].rx_num_channels*openair0_cfg[0].samples_per_packet));
knopp's avatar
 
knopp committed
747
  for (i = 0; i<openair0_cfg[0].rx_num_channels; i++)
knopp's avatar
 
knopp committed
748 749 750 751 752 753 754
    stream_args_rx.channels.push_back(i);
  s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
  std::cout << boost::format("rx_max_num_samps %u") % (s->rx_stream->get_max_num_samps()) << std::endl;
  //openair0_cfg[0].samples_per_packet = s->rx_stream->get_max_num_samps();

  uhd::stream_args_t stream_args_tx("sc16", "sc16");
  //stream_args_tx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].tx_num_channels*openair0_cfg[0].samples_per_packet));
knopp's avatar
 
knopp committed
755
  for (i = 0; i<openair0_cfg[0].tx_num_channels; i++)
knopp's avatar
 
knopp committed
756 757
      stream_args_tx.channels.push_back(i);
  s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);
knopp's avatar
 
knopp committed
758 759
  std::cout << boost::format("tx_max_num_samps %u") % (s->tx_stream->get_max_num_samps()) << std::endl;

knopp's avatar
 
knopp committed
760

761 762 763 764 765
 /* Setting TX/RX BW after streamers are created due to USRP calibration issue */
  for(i=0;i<s->usrp->get_tx_num_channels();i++) {
    if (i<openair0_cfg[0].tx_num_channels) {
      s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
      printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
Rohit Gupta's avatar
Rohit Gupta committed
766 767 768 769 770
    }
  }
  for(i=0;i<s->usrp->get_rx_num_channels();i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
      s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
771 772 773 774
      printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
    }
  }

knopp's avatar
 
knopp committed
775
  s->usrp->set_time_now(uhd::time_spec_t(0.0));
776
 
777

knopp's avatar
knopp committed
778 779
  for (i=0;i<openair0_cfg[0].rx_num_channels;i++) {
    if (i<openair0_cfg[0].rx_num_channels) {
knopp's avatar
 
knopp committed
780
      printf("RX Channel %lu\n",i);
knopp's avatar
knopp committed
781 782 783 784 785 786 787 788 789 790 791
      std::cout << boost::format("Actual RX sample rate: %fMSps...") % (s->usrp->get_rx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX frequency: %fGHz...") % (s->usrp->get_rx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual RX gain: %f...") % (s->usrp->get_rx_gain(i)) << std::endl;
      std::cout << boost::format("Actual RX bandwidth: %fM...") % (s->usrp->get_rx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual RX antenna: %s...") % (s->usrp->get_rx_antenna(i)) << std::endl;
    }
  }

  for (i=0;i<openair0_cfg[0].tx_num_channels;i++) {

    if (i<openair0_cfg[0].tx_num_channels) { 
knopp's avatar
 
knopp committed
792
      printf("TX Channel %lu\n",i);
knopp's avatar
knopp committed
793 794 795 796 797 798 799 800
      std::cout << std::endl<<boost::format("Actual TX sample rate: %fMSps...") % (s->usrp->get_tx_rate(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX frequency: %fGHz...") % (s->usrp->get_tx_freq(i)/1e9) << std::endl;
      std::cout << boost::format("Actual TX gain: %f...") % (s->usrp->get_tx_gain(i)) << std::endl;
      std::cout << boost::format("Actual TX bandwidth: %fM...") % (s->usrp->get_tx_bandwidth(i)/1e6) << std::endl;
      std::cout << boost::format("Actual TX antenna: %s...") % (s->usrp->get_tx_antenna(i)) << std::endl;
    }
  }

knopp's avatar
 
knopp committed
801
  std::cout << boost::format("Device timestamp: %f...") % (s->usrp->get_time_now().get_real_secs()) << std::endl;
knopp's avatar
 
knopp committed
802 803 804 805

  device->priv = s;
  device->trx_start_func = trx_usrp_start;
  device->trx_write_func = trx_usrp_write;
806 807 808 809 810 811 812
  device->trx_read_func  = trx_usrp_read;
  device->trx_get_stats_func = trx_usrp_get_stats;
  device->trx_reset_stats_func = trx_usrp_reset_stats;
  device->trx_end_func   = trx_usrp_end;
  device->trx_stop_func  = trx_usrp_stop;
  device->trx_set_freq_func = trx_usrp_set_freq;
  device->trx_set_gains_func   = trx_usrp_set_gains;
813 814
  device->openair0_cfg = openair0_cfg;

knopp's avatar
knopp committed
815
  s->sample_rate = openair0_cfg[0].sample_rate;
knopp's avatar
 
knopp committed
816 817 818 819 820 821 822 823 824
  // TODO:
  // init tx_forward_nsamps based usrp_time_offset ex
  if(is_equal(s->sample_rate, (double)30.72e6))
    s->tx_forward_nsamps  = 176;
  if(is_equal(s->sample_rate, (double)15.36e6))
    s->tx_forward_nsamps = 90;
  if(is_equal(s->sample_rate, (double)7.68e6))
    s->tx_forward_nsamps = 50;
  return 0;
825
  }
knopp's avatar
 
knopp committed
826
}
827
/*@}*/