Commit 0ae272d9 authored by Rohit Gupta's avatar Rohit Gupta
Browse files

Merge branch 'develop' into feature-34-test_framework

parents b1388b69 2f529ce8
......@@ -171,13 +171,13 @@ set(CMAKE_CXX_FLAGS
#########################
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,-rpath -Wl,${OPENAIR_TARGETS}/bin")
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,-rpath -Wl,${CMAKE_CURRENT_BINARY_DIR}")
#########################
# set a flag for changes in the source code
# these changes are related to hardcoded path to include .h files
add_definitions(-DCMAKER)
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O2")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O3")
set(GIT_BRANCH "UNKNOWN")
......
......@@ -4638,7 +4638,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py</eNB_pre_exec>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
......@@ -4714,7 +4714,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py</eNB_pre_exec>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
......@@ -4789,7 +4789,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py</eNB_pre_exec>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
......@@ -4864,7 +4864,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py</eNB_pre_exec>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
......@@ -4938,7 +4938,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py</eNB_pre_exec>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
......@@ -5012,7 +5012,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py</eNB_pre_exec>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
......
......@@ -132,10 +132,21 @@ compilations() {
############################################
install_nettle_from_source() {
nettle_install_log=$OPENAIR_DIR/cmake_targets/log/nettle_install_log.txt
echo_info "\nInstalling Nettle. The log file for nettle installation is here: $nettle_install_log "
(
cd /tmp
echo "Downloading nettle archive"
rm -rf /tmp/nettle-2.5.tar.gz* /tmp/nettle-2.5
wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz
$SUDO rm -rf /tmp/nettle-2.5.tar.gz* /tmp/nettle-2.5
wget https://ftp.gnu.org/gnu/nettle/nettle-2.5.tar.gz
if [ $? -ne 0 ]; then
wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz
fi
if [ ! -f nettle-2.5.tar.gz ]; then
echo_error "Could not download nettle source files"
cd -
return
fi
tar -xzf nettle-2.5.tar.gz
cd nettle-2.5/
./configure --disable-openssl --enable-shared --prefix=/usr
......@@ -143,21 +154,32 @@ install_nettle_from_source() {
make -j`nproc`
make check
$SUDO make install
rm -rf /tmp/nettle-2.5.tar.gz /tmp/nettle-2.5
) >& $nettle_install_log
}
install_gnutls_from_source(){
gnutls_install_log=$OPENAIR_DIR/cmake_targets/log/gnutls_install_log.txt
echo_info "\nInstalling Gnutls. The log file for Gnutls installation is here: $gnutls_install_log "
(
cd /tmp
echo "Downloading gnutls archive"
rm -rf /tmp/gnutls-3.1.23.tar.xz* /tmp/gnutls-3.1.23
wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz
tar -xzf gnutls-3.1.23.tar.xz
$SUDO rm -rf /tmp/gnutls-3.1.23.tar.xz* /tmp/gnutls-3.1.23
wget http://mirrors.dotsrc.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz
if [ $? -ne 0 ]; then
wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz
fi
if [ ! -f gnutls-3.1.23.tar.xz ]; then
echo_error "Could not download gnutls source files"
cd -
return
fi
tar -xJf gnutls-3.1.23.tar.xz
cd gnutls-3.1.23/
./configure --prefix=/usr
echo "Compiling gnutls"
make -j`nproc`
$SUDO make install
rm -rf /tmp/gnutls-3.1.23.tar.xz /tmp/gnutls-3.1.23
)>& $gnutls_install_log
}
......@@ -274,12 +296,12 @@ check_install_oai_software() {
android-tools-adb
$SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
if [ `lsb_release -rs` = '12.04' ] ; then
install_nettle_from_source
install_gnutls_from_source
else
$SUDO apt-get install -y libgnutls-dev nettle-dev nettle-bin
fi
# First we remove gnutls/nettle installation and then install from sources
$SUDO apt-get remove -y libgnutls-dev nettle-dev nettle-bin
install_nettle_from_source
install_gnutls_from_source
$SUDO pip install paramiko
$SUDO pip install pyroute2
install_asn1c_from_source
......@@ -288,8 +310,8 @@ check_install_oai_software() {
}
install_asn1c_from_source(){
asn1_install_dir=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_dir "
asn1_install_log=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_log "
(
$SUDO rm -rf /tmp/asn1c-r1516
mkdir -p /tmp/asn1c-r1516
......@@ -303,7 +325,7 @@ install_asn1c_from_source(){
./configure
make -j`nproc`
$SUDO make install
) > $asn1_install_dir 2>&1
) > $asn1_install_log 2>&1
}
#################################################
......
......@@ -71,6 +71,7 @@ function help()
echo_error " and PDCP-LTE. Then capture for all the interfaces with the following filters: s1ap or lte_rrc or mac-lte or rlc-lte"
echo_error " or pdcp-lte. Note the L2 pdus are transmitted to the local interface."
echo_error " -x, --xforms Run XFORMS scope windows."
echo_error " -n, --num-frames Set number of frames for simulation"
}
......@@ -165,6 +166,11 @@ function main()
exe_arguments="$exe_arguments -P wireshark"
shift 1;
;;
-n | --num-frames)
echo "setting the number of frames in simulation to $2"
exe_arguments="$exe_arguments -n $2"
shift 2;
;;
*)
echo "Unknown option $1"
help
......
......@@ -81,8 +81,10 @@ function help()
echo_error " "
echo_error "Options:"
echo_error "Mandatory arguments to long options are mandatory for short options too."
echo_error " -a, --abstraction enable phy abstraction mode"
echo_error " -c, -C, --config-file eNB_config_file eNB config file, (see $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF)"
echo_error " Default eNB config file if not set is $1"
echo_error " -l, --log-level set the global log level (8:trace, 7:debug, 6:info, 4:warn, 3:error). Note that the log configuration is eNB config file is ignored for oaisim."
echo_error " -g, --gdb Run with GDB."
echo_error " -h, --help Print this help."
echo_error " -K, --itti-dump-file filename ITTI dump file containing all ITTI events occuring during EPC runtime.(can omit file name if last argument)"
......@@ -114,8 +116,14 @@ function main()
until [ -z "$1" ]
do
case "$1" in
-a | --abstraction )
abstraction_flag=1
echo "enabling abstraction mode"
exe_arguments="$exe_arguments -a"
shift;
;;
-c | -C | --config-file)
CONFIG_FILE_ENB=$2
CONFIG_FILE_ENB=$2
# may be relative path
if [ -f $(dirname $(readlink -f $0))/$CONFIG_FILE ]; then
CONFIG_FILE_ENB=$(dirname $(readlink -f $0))/$CONFIG_FILE
......@@ -131,6 +139,11 @@ function main()
fi
shift 2;
;;
-l | --log-level)
echo "setting the log level to $2"
exe_arguments="$exe_arguments -l $2"
shift 2;
;;
-g | --gdb)
run_gdb=1
echo "setting GDB flag to: $GDB"
......@@ -241,7 +254,8 @@ function main()
if [ $? -ne 0 ]; then
bash -c echo "200 lte " >> /etc/iproute2/rt_tables
fi
ip rule add fwmark 1 table lte
ip rule add fwmark 1 table lte
ifconfig oip1 up
ip route add default dev oip1 table lte
exe_arguments="$exe_arguments -s15 -AAWGN -y1 -b1 -u1 -Q0"
......
......@@ -755,26 +755,26 @@ int lte_dl_mbsfn_channel_estimation(PHY_VARS_UE *phy_vars_ue,
if (phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa]) {
switch (phy_vars_ue->lte_frame_parms.N_RB_DL) {
case 6:
idft128((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][LTE_CE_OFFSET],
idft128((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][8],
(int16_t*) phy_vars_ue->lte_ue_common_vars.dl_ch_estimates_time[eNB_offset][aa],
1);
break;
case 25:
idft512((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][LTE_CE_OFFSET],
idft512((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][8],
(int16_t*) phy_vars_ue->lte_ue_common_vars.dl_ch_estimates_time[eNB_offset][aa],
1);
break;
case 50:
idft1024((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][LTE_CE_OFFSET],
idft1024((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][8],
(int16_t*) phy_vars_ue->lte_ue_common_vars.dl_ch_estimates_time[eNB_offset][aa],
1);
break;
case 75:
idft1536((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][LTE_CE_OFFSET],
idft1536((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][8],
(int16_t*) phy_vars_ue->lte_ue_common_vars.dl_ch_estimates_time[eNB_offset][aa]);
break;
case 100:
idft2048((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][LTE_CE_OFFSET],
idft2048((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][8],
(int16_t*) phy_vars_ue->lte_ue_common_vars.dl_ch_estimates_time[eNB_offset][aa],
1);
break;
......
......@@ -2057,7 +2057,7 @@ void process_HARQ_feedback(uint8_t UE_id,
// then Increment DLSCH round index
dlsch_harq_proc->round++;
if (dlsch_harq_proc->round == 1/*dlsch->Mdlharq*/) {
if (dlsch_harq_proc->round == dlsch->Mdlharq) {
// This was the last round for DLSCH so reset round and increment l2_error counter
#ifdef DEBUG_PHY_PROC
LOG_W(PHY,"[eNB %d][PDSCH %x/%d] DLSCH retransmissions exhausted, dropping packet\n",phy_vars_eNB->Mod_id,
......
......@@ -128,7 +128,7 @@ int main(int argc, char **argv)
char c;
int i,l,aa,aarx,k;
int i,l,l2,aa,aarx,k;
double sigma2, sigma2_dB=0,SNR,snr0=-2.0,snr1=0.0;
uint8_t snr1set=0;
double snr_step=1,input_snr_step=1;
......@@ -337,7 +337,11 @@ int main(int argc, char **argv)
else
sprintf(fname,"embms_awgn_%d_%d.m",mcs,N_RB_DL);
fd = fopen(fname,"w");
if (!(fd = fopen(fname,"w"))) {
printf("Cannot open %s, check permissions\n",fname);
exit(-1);
}
if (awgn_flag==0)
fprintf(fd,"SNR_%d_%d=[];errs_mch_%d_%d=[];mch_trials_%d_%d=[];\n",
......@@ -538,11 +542,25 @@ int main(int argc, char **argv)
}
}
}
rx_pmch(PHY_vars_UE,
0,
subframe%10,
l);
if (l==6)
for (l2=2;l2<7;l2++)
rx_pmch(PHY_vars_UE,
0,
subframe%10,
l2);
if (l==6)
for (l2=2;l2<7;l2++)
rx_pmch(PHY_vars_UE,
0,
subframe%10,
l2);
if (l==11)
for (l2=7;l2<12;l2++)
rx_pmch(PHY_vars_UE,
0,
subframe%10,
l2);
}
PHY_vars_UE->dlsch_ue_MCH[0]->harq_processes[0]->G = get_G(&PHY_vars_UE->lte_frame_parms,
......
......@@ -484,7 +484,7 @@ int pdcp_fifo_read_input_sdus (const protocol_ctxt_t* const ctxt_pP)
ctxt.enb_flag = ENB_FLAG_NO;
ctxt.module_id = pdcp_read_header_g.inst - oai_emulation.info.nb_enb_local + oai_emulation.info.first_ue_local;
ctxt.rnti = pdcp_UE_UE_module_id_to_rnti[ctxt.module_id];
rab_id = pdcp_read_header_g.rb_id;
rab_id = pdcp_read_header_g.rb_id % maxDRB;
}
CHECK_CTXT_ARGS(&ctxt);
......
......@@ -520,7 +520,7 @@ rrc_rx_tx(
} else { // eNB
check_handovers(ctxt_pP);
// counetr, and get the value and aggregate
#ifdef LOCALIZATION
#ifdef RRC_LOCALIZATION
/* for the localization, only primary CC_id might be relevant*/
gettimeofday(&ts, NULL);
......
......@@ -515,7 +515,7 @@ int init_opt(char *path, char *ip, char *port, radio_type_t radio_type_p)
strncpy( in_path, path, sizeof(in_path) );
in_path[sizeof(in_path) - 1] = 0; // terminate string
} else {
strcpy( in_path, "/tmp/oai_opt.pcap" );
strcpy( in_path, "/tmp/opt.pcap" );
}
if (ip != NULL) {
......
......@@ -181,6 +181,35 @@ int esm_send_pdn_connectivity_request(int pti, int is_emergency, int pdn_type,
}
}
/* Add PCO */
# define CONFIGURATION_PROTOCOL_PPP 0
# define PROTOCOL_ID_IPCP 0x8021
# define PROTOCOL_ID_DNS_SERVER_IPV4_ADDRESS 0x000D
# define PROTOCOL_ID_IP_ADDR_NAS_SIGNALING 0x000A
msg->presencemask |= PDN_CONNECTIVITY_REQUEST_PROTOCOL_CONFIGURATION_OPTIONS_PRESENT;
msg->protocolconfigurationoptions.configurationprotol = CONFIGURATION_PROTOCOL_PPP;
msg->protocolconfigurationoptions.num_protocol_id_or_container_id = 3;
msg->protocolconfigurationoptions.protocolid[0] = PROTOCOL_ID_IPCP;
msg->protocolconfigurationoptions.lengthofprotocolid[0] = 16; /* Size of PROTOCOL_ID_IPCP */
msg->protocolconfigurationoptions.protocolidcontents[0].value = (uint8_t *)
/* PROTOCOL_ID_IPCP data */
/* the format is as of RFC 1331 (see page 27) */
"\x01" /* Configure-Request */
"\x00" /* Indentifier (set to 0) */
"\x00\x10" /* Length (16 bytes) */
"\x81" /* Type = Primary DNS - see RFC 1877 */
"\x06" /* length */
"\x00\x00\x00\x00" /* IP address set to 0 */
"\x83" /* Type = Secondary DNS - see RFC 1877 */
"\x06" /* length */
"\x00\x00\x00\x00"; /* IP address set to 0 */
msg->protocolconfigurationoptions.protocolidcontents[0].length = 16;
msg->protocolconfigurationoptions.protocolid[1] = PROTOCOL_ID_DNS_SERVER_IPV4_ADDRESS;
msg->protocolconfigurationoptions.lengthofprotocolid[1] = 0x00;
msg->protocolconfigurationoptions.protocolid[2] = PROTOCOL_ID_IP_ADDR_NAS_SIGNALING;
msg->protocolconfigurationoptions.lengthofprotocolid[2] = 0x00;
LOG_TRACE(INFO, "ESM-SAP - Send PDN Connectivity Request message "
"(pti=%d, ebi=%d)",
msg->proceduretransactionidentity, msg->epsbeareridentity);
......
......@@ -597,10 +597,10 @@ extern "C" {
openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
bw_gain_adjust=1;
}
switch ((int)openair0_cfg[0].sample_rate) {
case 30720000:
s->usrp->set_master_clock_rate(30.72e6);
// from usrp_time_offset
openair0_cfg[0].samples_per_packet = 4096;
openair0_cfg[0].tx_sample_advance = 115;
openair0_cfg[0].tx_bw = 20e6;
......@@ -608,7 +608,7 @@ extern "C" {
openair0_cfg[0].tx_scheduling_advance = 11*openair0_cfg[0].samples_per_packet;
break;
case 23040000:
s->usrp->set_master_clock_rate(46.08e6);
s->usrp->set_master_clock_rate(23.04e6); //to be checked
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].tx_sample_advance = 113;
openair0_cfg[0].tx_bw = 20e6;
......@@ -616,27 +616,27 @@ extern "C" {
openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
break;
case 15360000:
s->usrp->set_master_clock_rate(30.72e6);
s->usrp->set_master_clock_rate(30.72e06);
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].tx_sample_advance = 113;
openair0_cfg[0].tx_bw = 10e6;
openair0_cfg[0].rx_bw = 10e6;
openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
openair0_cfg[0].tx_sample_advance = 103;
openair0_cfg[0].tx_bw = 20e6;
openair0_cfg[0].rx_bw = 20e6;
openair0_cfg[0].tx_scheduling_advance = 10240;
break;
case 7680000:
s->usrp->set_master_clock_rate(30.72e6);
openair0_cfg[0].samples_per_packet = 1024;
openair0_cfg[0].tx_sample_advance = 70;//103;
openair0_cfg[0].tx_bw = 5e6;
openair0_cfg[0].rx_bw = 5e6;
openair0_cfg[0].tx_sample_advance = 80;
openair0_cfg[0].tx_bw = 20e6;
openair0_cfg[0].rx_bw = 20e6;
openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
break;
case 1920000:
s->usrp->set_master_clock_rate(30.72e6);
s->usrp->set_master_clock_rate(7.68e6);
openair0_cfg[0].samples_per_packet = 256;
openair0_cfg[0].tx_sample_advance = 40;
openair0_cfg[0].tx_bw = 1.25e6;
openair0_cfg[0].rx_bw = 1.25e6;
openair0_cfg[0].tx_bw = 20e6;
openair0_cfg[0].rx_bw = 20e6;
openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
break;
default:
......@@ -655,8 +655,8 @@ extern "C" {
for(i=0;i<s->usrp->get_rx_num_channels();i++) {
if (i<openair0_cfg[0].rx_num_channels) {
s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
//s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
//printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
......@@ -676,8 +676,8 @@ extern "C" {
for(i=0;i<s->usrp->get_tx_num_channels();i++) {
if (i<openair0_cfg[0].tx_num_channels) {
s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
//s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
//printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
}
......@@ -686,6 +686,8 @@ extern "C" {
// display USRP settings
std::cout << boost::format("Actual master clock: %fMHz...") % (s->usrp->get_master_clock_rate()/1e6) << std::endl;
sleep(1);
// create tx & rx streamer
uhd::stream_args_t stream_args_rx("sc16", "sc16");
......@@ -704,6 +706,20 @@ extern "C" {
std::cout << boost::format("tx_max_num_samps %u") % (s->tx_stream->get_max_num_samps()) << std::endl;
/* Setting TX/RX BW after streamers are created due to USRP calibration issue */
for(i=0;i<s->usrp->get_tx_num_channels();i++) {
if (i<openair0_cfg[0].tx_num_channels) {
s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
}
}
for(i=0;i<s->usrp->get_rx_num_channels();i++) {
if (i<openair0_cfg[0].rx_num_channels) {
s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
}
}
s->usrp->set_time_now(uhd::time_spec_t(0.0));
......
......@@ -35,7 +35,7 @@ eNBs =
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 132;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment