Commit 1f7abbc0 authored by knopp's avatar knopp
Browse files

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5952 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 7785b5aa
......@@ -119,7 +119,7 @@ static void trx_usrp_end(openair0_device *device)
s->tx_stream->send("", 0, s->tx_md);
s->tx_md.end_of_burst = false;
}
static void trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, const void **buff, int nsamps, int flags)
static void trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, const void **buff, int nsamps, int cc, int flags)
{
usrp_state_t *s = (usrp_state_t*)device->priv;
......@@ -137,7 +137,7 @@ static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp
usrp_state_t *s = (usrp_state_t*)device->priv;
int samples_received[cc],i;
int samples_received,i;
samples_received = s->rx_stream->recv(buff, nsamps, s->rx_md);
......@@ -221,13 +221,13 @@ int openair0_device_init(openair0_device* device, openair0_config_t *openair0_cf
s->usrp->set_rx_rate(openair0_cfg[0].sample_rate);
s->usrp->set_tx_rate(openair0_cfg[0].sample_rate);
for(i=0;i<usrp->get_rx_num_channels();i++) {
for(i=0;i<s->usrp->get_rx_num_channels();i++) {
if (i<openair0_cfg[0].rx_num_channels) {
s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i]);
s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]);
}
}
for(i=0;i<usrp->get_tx_num_channels();i++) {
for(i=0;i<s->usrp->get_tx_num_channels();i++) {
if (i<openair0_cfg[0].tx_num_channels) {
s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i]);
s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i]);
......@@ -239,9 +239,9 @@ int openair0_device_init(openair0_device* device, openair0_config_t *openair0_cf
// create tx & rx streamer
uhd::stream_args_t stream_args_rx("sc16", "sc16");
uhd::stream_args_t stream_args_tx("sc16", "sc16");
for (i = 0; i< openair0_cfg[0].rx_num_channels(); i++)
for (i = 0; i<openair0_cfg[0].rx_num_channels; i++)
stream_args_rx.channels.push_back(i);
for (i = 0; i< openair0_cfg[0].tx_num_channels(); i++)
for (i = 0; i<openair0_cfg[0].tx_num_channels; i++)
stream_args_tx.channels.push_back(i);
s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);
......
......@@ -41,10 +41,10 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_INTERFACE_NAME_FOR_S1_MME = "eth1";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_INTERFACE_NAME_FOR_S1U = "eth1";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24";
};
......
......@@ -3045,11 +3045,18 @@ int main(int argc, char **argv) {
openair0_cfg[card].tx_num_channels=min(2,((UE_flag==0) ? PHY_vars_eNB_g[0][0]->lte_frame_parms.nb_antennas_tx : PHY_vars_UE_g[0][0]->lte_frame_parms.nb_antennas_tx));
openair0_cfg[card].rx_num_channels=min(2,((UE_flag==0) ? PHY_vars_eNB_g[0][0]->lte_frame_parms.nb_antennas_rx : PHY_vars_UE_g[0][0]->lte_frame_parms.nb_antennas_rx));
for (i=0;i<4;i++) {
openair0_cfg[card].tx_gain[i] = tx_gain[0][i];
openair0_cfg[card].rx_gain[i] = ((UE_flag==0) ? PHY_vars_eNB_g[0][0]->rx_total_gain_eNB_dB :
PHY_vars_UE_g[0][0]->rx_total_gain_dB) - 73; // calibrated for USRP B210 @ 2.6 GHz
openair0_cfg[card].tx_freq[i] = (UE_flag==0) ? downlink_frequency[0][i] : downlink_frequency[0][i]+uplink_frequency_offset[0][i];
openair0_cfg[card].rx_freq[i] = (UE_flag==0) ? downlink_frequency[0][i] + uplink_frequency_offset[0][i] : downlink_frequency[0][i];
printf("Setting tx_gain %f, rx_gain %f, tx_freq %f, rx_freq %f\n",
openair0_cfg[card].tx_gain[i],
openair0_cfg[card].rx_gain[i],
openair0_cfg[card].tx_freq[i],
openair0_cfg[card].rx_freq[i]);
}
#endif
}
......@@ -3107,7 +3114,7 @@ int main(int argc, char **argv) {
for(CC_id=0;CC_id<MAX_NUM_CCs;CC_id++) {
rf_map[CC_id].card=0;
rf_map[CC_id].chain=CC_id+1;
rf_map[CC_id].chain=CC_id;
}
// connect the TX/RX buffers
......@@ -3643,7 +3650,7 @@ int setup_eNB_buffers(PHY_VARS_eNB **phy_vars_eNB, openair0_config_t *openair0_c
rxdata = (int32_t*)malloc16(samples_per_frame*sizeof(int32_t));
phy_vars_eNB[CC_id]->lte_eNB_common_vars.rxdata[0][i] = rxdata-N_TA_offset; // N_TA offset for TDD
memset(rxdata, 0, samples_per_frame*sizeof(int32_t));
printf("rxdata[%d] @ %p (%p)\n", i, phy_vars_eNB[CC_id]->lte_eNB_common_vars.rxdata[0][i],rxdata);
printf("rxdata[%d] @ %p (%p) (N_TA_OFFSET %d)\n", i, phy_vars_eNB[CC_id]->lte_eNB_common_vars.rxdata[0][i],rxdata,N_TA_offset);
}
for (i=0;i<frame_parms->nb_antennas_tx;i++) {
free(phy_vars_eNB[CC_id]->lte_eNB_common_vars.txdata[0][i]);
......
sh /opt/XIO2000/xio_script.sh
cd ../USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 4 1
rmmod -f openair_rf
cd ../..
make install_cbmimo1_softmodem_lte_emos_l2
cd LAUNCH_SCRIPTS
#!/bin/sh
echo "start setting up eNB interface"
cd $OPENAIR2_DIR
sudo rmmod nasmesh
#make nasmesh_netlink_address_fix.ko
#make nasmesh_netlink.ko
#make nasmesh.ko
#make rb_tool
#route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
cd -
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.2 -r 3
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.1.1 -t 10.0.1.3 -r 11
echo "end setting up NAS interface"
#!/bin/sh
echo "setting up UE NAS interface"
cd $OPENAIR2_DIR
sudo rmmod nasmesh
#make nasmesh_netlink_address_fix.ko
#make nasmesh_netlink.ko
#make nasmesh.ko
#make rb_tool
#route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
cd -
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
sudo ifconfig oai0 10.0.1.2 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.2 -t 10.0.1.1 -r 3
echo "end setting up NAS interface"
#!/bin/sh
echo "setting up UE NAS interface"
cd $OPENAIR2_DIR
sudo rmmod nasmesh
#make nasmesh_netlink_address_fix.ko
#make nasmesh_netlink.ko
#make nasmesh.ko
#make rb_tool
#route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
cd -
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
sudo ifconfig oai0 10.0.1.3 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.3 -t 10.0.1.1 -r 3
echo "end setting up NAS interface"
sudo sh $OPENAIR1_DIR/xio_script.sh
sh stop_rf.sh
sh start_rf.sh
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 0 0 1 # dump Config
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 6 110 110 100 100 #Set TX gains
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 2 26 100 #Card v2_10 synched to v2_19
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 14 0 #SET RX RF Mode
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 32 1 #Set DLSCH Transmission Mod
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 1 0 0 #Start Primary Clusterhead
#$OPENAIR1_DIR/USERSPACE_TOOLS/SCOPE/lte_scope_ul 0 0 &
#$OPENAIR1_DIR/USERSPACE_TOOLS/SCOPE/lte_scope_ul 0 1 &
\ No newline at end of file
sudo sh $OPENAIR1_DIR/xio_script.sh
sh stop_rf.sh
sh start_rf.sh
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 0 1 1
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 6 110 110 100 100
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 2 26 100 #Card v2_10 synched to v2_19
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 14 0
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 32 2
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 1 1 0
cd USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 4 1
rmmod -f openair_rf
cd ../..
make install_cbmimo1_softmodem_lte_emos_l2
cd USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 0 1 1
./openair_rf_cbmimo1_lte 0 6 137 137 140 140
./openair_rf_cbmimo1_lte 0 14 2
./openair_rf_cbmimo1_lte 0 32 6
source /opt/XIO2000/xio_script.sh
./openair_rf_cbmimo1_lte 0 1 1 0
cd ../..
gpsd /dev/ttyUSB0
cd USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 4 1
rmmod -f openair_rf
cd ../..
make install_cbmimo1_softmodem_lte_emos_l2
cd EMOS/LTE/GUI
./emos_gui &
sudo insmod $OPENAIR2_DIR/RRC/LITE/MESSAGES/asn1_msg_kern.ko
sudo insmod $OPENAIR1_DIR/ARCH/CBMIMO1/DEVICE_DRIVER/openair_rf_softmodem.ko
\ No newline at end of file
sh $OPENAIR1_DIR/xio_script.sh
cd ../USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 4 1
rmmod -f openair_rf
cd ../..
make install_cbmimo1_softmodem
cd USERSPACE_TOOLS/OPENAIR_RF
./openair_rf_cbmimo1_lte 0 0 1 1
./openair_rf_cbmimo1_lte 0 26 100
./openair_rf_cbmimo1_lte 0 6 150 150 140 140
./openair_rf_cbmimo1_lte 0 14 0
./openair_rf_cbmimo1_lte 0 8 1
cd ../../LAUNCH_SCRIPTS
sudo sh $OPENAIR1_DIR/xio_script.sh
sh stop_rf.sh
sh start_rf.sh
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 0 0 1 # dump config
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 6 100 100 100 100 #Set TX gains
#./openair_rf_cbmimo1_lte 0 25 0
#./openair_rf_cbmimo1_lte 0 15 101 # Card v15 synched to card v38
#./openair_rf_cbmimo1_lte 0 15 117 # Card v15 synched to card v5
#./openair_rf_cbmimo1_lte 0 15 135 # Card v37 synched to card v5
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 15 89 # Card v42 synched to card v43
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 15 85 # Card v47 synched to card v43
#./openair_rf_cbmimo1_lte 0 26 400
#$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 15 103 # Card v47 synched to card v42
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 15 110 # Card v42 synched to card v47
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 14 0 #RF mode 0 = mixer low gain, lna off
#./openair_rf_cbmimo1_lte 0 14 1 #RF mode 1 = mixer low gain, lna on
#./openair_rf_cbmimo1_lte 0 14 2 #RF mode 2 = mixer high gain, lna on
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 3 1 0 #Start Node - param 0/1
sudo sh $OPENAIR1_DIR/xio_script.sh
sh stop_rf.sh
sh start_rf.sh
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 0 0 1
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 6 100 100 100 100
#./openair_rf_cbmimo1_lte 0 25 0
#./openair_rf_cbmimo1_lte 0 15 101 # Card v15 synched to card v38
#./openair_rf_cbmimo1_lte 0 15 117 # Card v15 synched to card v5
#./openair_rf_cbmimo1_lte 0 15 135 # Card v37 synched to card v5
#./openair_rf_cbmimo1_lte 0 26 400
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 14 0 #RF mode 0 = mixer low gain, lna off
#./openair_rf_cbmimo1_lte 0 14 1 #RF mode 1 = mixer low gain, lna on
#./openair_rf_cbmimo1_lte 0 14 2 #RF mode 2 = mixer high gain, lna on
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 3 1 1
killall lte_scope
killall lte_scope_ul
$OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF/openair_rf_cbmimo1_lte 0 4 1
sudo rmmod -f nasmesh
sudo rmmod -f openair_rf
sudo rmmod -f asn1_msg_kern
# command line flags are automatically exported and thus passed down to any sub-make.
# here we set the default flags in case on command line flags are provided
# these flags have to be explicitely exported so that the sub-make is aware of them
ifndef OPENAIR_LTE
export OPENAIR_LTE=1
export OPENAIR_EMU=0
endif
ifndef OPENAIR1
export OPENAIR1=0
endif
ifndef OPENAIR2
export OPENAIR2=0
endif
ifndef OPENAIR3
export OPENAIR3=0
endif
ifndef EMOS
export EMOS=0
endif
ifndef rrc_cellular
export rrc_cellular = 0
export rrc_cellular_eNB = 0
export rrc_cellular_UE = 0
else
export rrc_cellular = 1
ifeq ($(eNB_flag),1)
export rrc_cellular_eNB=1
endif
ifeq ($(UE_flag),1)
export rrc_cellular_UE=1
endif
endif
all: openair_rf_cbmimo1_softmodem.ko asn1_msg_kern.ko nasmesh.ko rb_tool openair_rf scope
openair_rf_cbmimo1_softmodem.ko:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) -C /usr/src/linux V=1 M=`pwd` RTAI=1 CBMIMO1=1 && mv openair_rf.ko $(CURDIR)/openair_rf_softmodem.ko)
oai_user_cbmimo1.ko:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) -C /usr/src/linux V=1 M=`pwd` RTAI=1 CBMIMO1=1 BIT8_TX=1 OPENAIR1=0 OPENAIR2=0 && mv openair_rf.ko $(CURDIR)/openair_rf_softmodem.ko)
oai_user_exmimo.ko:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) -C /usr/src/linux V=1 M=`pwd` RTAI=1 CBMIMO1=1 OPENAIR1=0 OPENAIR2=0 && mv openair_rf.ko $(CURDIR)/openair_rf_softmodem.ko)
asn1_msg_kern.ko:
(cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES && $(MAKE) -C /usr/src/linux V=0 M=`pwd` RTAI=1 -j2 && mv asn1_msg_kern.ko $(CURDIR)/asn1_msg_kern.ko)
nasmesh.ko:
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH && $(MAKE) V=1 -C /usr/src/linux M=`pwd` && mv nasmesh.ko $(CURDIR)/nasmesh.ko)
rb_tool:
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL && $(MAKE))
openair_rf:
(cd $(OPENAIR1_DIR)/USERSPACE_TOOLS/OPENAIR_RF && $(MAKE) clean CBMIMO1=1 && $(MAKE) all CBMIMO1=1 && $(MAKE) clean CBMIMO1=1)
scope:
(cd $(OPENAIR1_DIR)/USERSPACE_TOOLS/SCOPE && $(MAKE) clean && $(MAKE) all && $(MAKE) clean )
#Remove all but source files
cleanall:
(cd $(OPENAIR1_DIR) && $(MAKE) cleanall)
(cd $(OPENAIR2_DIR) && $(MAKE) cleanall)
fifos:
@for i in `seq 0 64`;\
do \
have_rtfX=`ls /dev/ |grep -c rtf$$i`;\
if [ "$$have_rtfX" -eq 0 ] ;then \
mknod -m 666 /dev/rtf$$i c 150 $$i; \
fi;\
done
openair0:
mknod /dev/openair0 c 127 0
chmod a+rw /dev/openair0
install_oai_user:
make fifos
insmod openair_rf_softmodem.ko
updatefw:
$(OPENAIR1_DIR)/USERSPACE_TOOLS/OAI_FW_INIT/updatefw -f $$OPENAIR0_DIR/express-mimo/software/sdr/main -s 0x43fffff0
boot_exmimo:
sudo make install_oai_user
$(OPENAIR1_DIR)/USERSPACE_TOOLS/OAI_FW_INIT/updatefw -f $$OPENAIR0_DIR/express-mimo/software/sdr/main -s 0x43fffff0
sleep 1
sudo rmmod openair_rf
sudo make install_oai_user
reboot_exmimo:
$(OPENAIR1_DIR)/USERSPACE_TOOLS/OAI_FW_INIT/updatefw -f $$OPENAIR0_DIR/express-mimo/software/sdr/main -s 0x43fffff0 -b
sudo rmmod openair_rf
sudo make install_oai_user
install_softmodem:
make fifos
ifeq ($(OPENAIR2),1)
insmod asn1_msg_kern.ko
endif
insmod openair_rf_softmodem.ko
remove:
rmmod openair_rf
ifeq ($(OPENAIR2),1)
rmmod asn1_msg_kern
endif
test:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) test RTAI=1 CBMIMO1=1)
(cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES && $(MAKE) test)
clean:
(cd $(OPENAIR1_DIR)/ARCH/CBMIMO1/DEVICE_DRIVER && $(MAKE) clean RTAI=1 CBMIMO1=1)
(cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES && $(MAKE) clean)
sleeptest:lxrt+sem+mbx+msg+fifos:!./sleeptest;sleep 1;popall:control_c
synctest:lxrt+sem+mbx+msg+fifos:!./synctest -V;sleep 1;popall:control_c
condtest:lxrt+sem+mbx+msg+fifos:!sudo ./condtest;sleep 1;popall:control_c
msg_test:lxrt+sem+mbx+msg+fifos:!sudo ./msg_test;sleep 1;popall:control_c
msg_many:lxrt+sem+mbx+msg+fifos:!sudo ./msg_test;sleep 1;popall:control_c
eNB:lxrt+sem+mbx+msg+fifos:!sudo ./synctest;sleep 1;popall:control_c
eNB_test:lxrt+sem+mbx+msg+smi:!sudo ./lte-softmodem -S -F enb2tx;sleep 1;popall:control_c
UE:lxrt+sem+mbx+msg+fifos:!sudo ./synctest -U -d -T 108;sleep 1;popall:control_c
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907602944 -V;sleep 1;popall:control_c
#EXMIMO2 card 1
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600480 -V;sleep 1;popall:control_c
UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600480 -V -K /tmp/itti_UE0.log;sleep 1;popall:control_c
#EXMIMO2 card 5
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907597240 -V;sleep 1;popall:control_c
#EXMIMO2 card 24
#UE0_smbv:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907595776 -V;sleep 1;popall:control_c
#EXMIMO2 card 5?
UE0_smbv:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907598252 -V;sleep 1;popall:control_c
UE850:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 859498000 -F ex2_850;sleep 1;popall:control_c
eNB850:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -d -C 859500000 -F ex2_850;sleep 1;popall:control_c
UE0noL2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600480 --no-L2-connect;sleep 1;popall:control_c
UE0calib:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1912600000 --calib-ue-rx -70 ;sleep 1;popall:control_c
UE0calibmed:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1912600000 --calib-ue-rx-med -70 ;sleep 1;popall:control_c
UE0calibbyp:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1912600000 --calib-ue-rx-byp -70 ;sleep 1;popall:control_c
UE0prach:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1912606900 -F ue1 --debug-ue-prach;sleep 1;popall:control_c
UE1:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue1 ;sleep 1;popall:control_c
UE1prach:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue1 --debug-ue-prach;sleep 1;popall:control_c
UE1noL2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue1 --no-L2-connect;sleep 1;popall:control_c
UE2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue2;sleep 1;popall:control_c
UE2prach:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue2 --debug-ue-prach;sleep 1;popall:control_c
UE2noL2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600000 -F ue2 --no-L2-connect;sleep 1;popall:control_c
#eNB0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907600000 -d -V;sleep 1;popall:control_c
#eNB0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907598252 -d -V;sleep 1;popall:control_c
eNB0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -d -O../../PROJECTS/GENERIC-LTE-EPC/CONF/enb.sfr.sud.conf -V -K /tmp/itti_eNB0.log;sleep 1;popall:control_c
eNB1:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907600000 -F ex2_2 -d;sleep 1;popall:control_c
eNB2:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -C 1907600000 -F ue2 -d;sleep 1;popall:control_c
dot11:lxrt+sem+mbx+msg+fifos:!sudo ./dot11 -C 1907600000 -d;sleep 1;popall:control_c
dot11_tx_test: lxrt+sem+mbx+msg+fifos:!sudo ./dot11 -C 1907600000 -d -t;sleep 1;popall:control_c
eNB2_750:lxrt+sem+mbx+msg+fifos:!sudo ./synctest_eNB -C 746000000 -F enb1tx_750 -d;sleep 1;popall:control_c
eNB2_1900:lxrt+sem+mbx+msg+fifos:!sudo ./synctest_eNB -C 19076000000 -F enb1tx_1900 -d;sleep 1;popall:control_c
emos-raw:lxrt+sem+mbx+msg+fifos:!sudo ./emos-raw -d -V;sleep 1;popall:control_c
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment