Commit 24d24f12 authored by Rohit Gupta's avatar Rohit Gupta

addition of RRH test cases

parent 574f3138
......@@ -171,6 +171,25 @@ Obj.# Case# Test# Description
01 65 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 65 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 70 00 lte-softmodem tests with SoDeRa RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 70 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 70 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 70 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 70 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 70 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 70 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 75 00 lte-softmodem + RRH tests with B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 75 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 75 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 75 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 75 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 75 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 75 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 64 lte-softmodem-noS1 tests
02 Functional test case
......
......@@ -571,6 +571,17 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
nruns = nruns_lte_softmodem
nruns = int(float(nruns))
tags = testcase.findtext('tags',default='')
RRHMachine = testcase.findtext('RRH',default='')
RRH_compile_prog = testcase.findtext('RRH_compile_prog',default='')
RRH_compile_prog_args = testcase.findtext('RRH_compile_prog_args',default='')
RRH_pre_exec = testcase.findtext('RRH_pre_exec',default='')
RRH_pre_exec_args = testcase.findtext('RRH_pre_exec_args',default='')
RRH_main_exec = testcase.findtext('RRH_main_exec',default='')
RRH_main_exec_args = testcase.findtext('RRH_main_exec_args',default='')
RRH_terminate_missing_procs = testcase.findtext('RRH_terminate_missing_procs',default='True')
eNBMachine = testcase.findtext('eNB',default='')
eNB_config_file = testcase.findtext('eNB_config_file',default='')
eNB_compile_prog = testcase.findtext('eNB_compile_prog',default='')
......@@ -635,13 +646,15 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
oai_EPC = openair('localdomain', EPCMachine)
oai_EPC.connect(user, password)
res = oai_eNB.send_recv(cmd)
if RRHMachine != '':
cmd = 'cd ' + logdirOAI5GRepo + '; source oaienv ; env|grep OPENAIR'
index_RRHMachine = MachineList.index(RRHMachine)
oai_RRH = openair('localdomain', RRHMachine)
oai_RRH.connect(user, password)
res= oai_RRH.send_recv(cmd)
#cleanOldPrograms(oai_eNB, oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
#cleanOldPrograms(oai_UE, oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
#cleanOldPrograms(oai_EPC, oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
logdir_eNB = logdirOAI5GRepo+'/cmake_targets/autotests/log/'+ testcasename
logdir_UE = logdirOAI5GRepo+'/cmake_targets/autotests/log/'+ testcasename
logdir_EPC = logdirOpenaircnRepo+'/TEST/autotests/log/'+ testcasename
logdir_local = os.environ.get('OPENAIR_DIR')
if logdir_local is None:
print "Environment variable OPENAIR_DIR not set correctly"
......@@ -667,10 +680,14 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
run_result=1
run_result_string=''
logdir_eNB = logdirOAI5GRepo+'/cmake_targets/autotests/log/'+ testcasename + '/run_' + str(run)
logdir_RRH = logdirOAI5GRepo+'/cmake_targets/autotests/log/'+ testcasename + '/run_' + str(run)
logdir_UE = logdirOAI5GRepo+'/cmake_targets/autotests/log/'+ testcasename + '/run_' + str(run)
logdir_EPC = logdirOpenaircnRepo+'/TEST/autotests/log/'+ testcasename + '/run_' + str(run)
logdir_local_testcase = logdir_local + '/cmake_targets/autotests/log/'+ testcasename + '/run_' + str(run)
#Make the log directory of test case
if RRHMachine != '':
cmd = 'rm -fr ' + logdir_RRH + ' ; mkdir -p ' + logdir_RRH
result = oai_RRH.send_recv(cmd)
cmd = 'rm -fr ' + logdir_eNB + ' ; mkdir -p ' + logdir_eNB
result = oai_eNB.send_recv(cmd)
cmd = 'rm -fr ' + logdir_UE + ' ; mkdir -p ' + logdir_UE
......@@ -679,6 +696,39 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
result = oai_EPC.send_recv(cmd)
cmd = ' rm -fr ' + logdir_local_testcase + ' ; mkdir -p ' + logdir_local_testcase
result = os.system(cmd)
if RRHMachine != '':
logfile_compile_RRH = logdir_RRH + '/RRH_compile' + '_' + str(run) + '_.log'
logfile_exec_RRH = logdir_RRH + '/RRH_exec' + '_' + str(run) + '_.log'
logfile_pre_exec_RRH = logdir_RRH + '/RRH_pre_exec' + '_' + str(run) + '_.log'
logfile_task_RRH_compile_out = logdir_RRH + '/RRH_task_compile_out' + '_' + str(run) + '_.log'
logfile_task_RRH_compile = logdir_local_testcase + '/RRH_task_compile' + '_' + str(run) + '_.log'
logfile_task_RRH_out = logdir_RRH + '/RRH_task_out' + '_' + str(run) + '_.log'
logfile_task_RRH = logdir_local_testcase + '/RRH_task' + '_' + str(run) + '_.log'
task_RRH_compile = ' ( uname -a ; date \n'
task_RRH_compile = task_RRH_compile + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n'
task_RRH_compile = task_RRH_compile + 'env |grep OPENAIR \n'
if RRH_compile_prog != "":
task_RRH_compile = task_RRH_compile + ' ( ' + RRH_compile_prog + ' '+ RRH_compile_prog_args + ' ) > ' + logfile_compile_RRH + ' 2>&1 \n'
task_RRH_compile = task_RRH_compile + ' date ) > ' + logfile_task_RRH_compile_out + ' 2>&1 '
write_file(logfile_task_RRH_compile, task_RRH_compile, mode="w")
task_RRH = ' ( uname -a ; date \n'
task_RRH = task_RRH + ' export OPENAIR_TESTDIR=' + logdir_RRH + '\n'
task_RRH = task_RRH + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n'
task_RRH = task_RRH + 'env |grep OPENAIR \n' + 'array_exec_pid=() \n'
if RRH_pre_exec != "":
task_RRH = task_RRH + ' ( date; ' + RRH_pre_exec + ' '+ RRH_pre_exec_args + ' ) > ' + logfile_pre_exec_RRH + ' 2>&1 \n'
if RRH_main_exec != "":
task_RRH = task_RRH + ' ( date; ' + addsudo(RRH_main_exec + ' ' + RRH_main_exec_args, mypassword) + ' ) > ' + logfile_exec_RRH + ' 2>&1 & \n'
task_RRH = task_RRH + 'array_exec_pid+=($!) \n'
task_RRH = task_RRH + 'echo eNB_main_exec PID = $! \n'
#terminate the eNB test case after timeout_cmd seconds
task_RRH = task_RRH + finalize_deploy_script (timeout_cmd, RRH_terminate_missing_procs) + ' \n'
task_RRH = task_RRH + 'handle_ctrl_c' + '\n'
task_RRH = task_RRH + ' ) > ' + logfile_task_RRH_out + ' 2>&1 '
write_file(logfile_task_RRH, task_RRH, mode="w")
logfile_compile_eNB = logdir_eNB + '/eNB_compile' + '_' + str(run) + '_.log'
logfile_exec_eNB = logdir_eNB + '/eNB_exec' + '_' + str(run) + '_.log'
......@@ -839,14 +889,20 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
thread_EPC = oaiThread(1, "EPC_thread", EPCMachine, user, password , task_EPC_compile, False, timeout_thread)
thread_eNB = oaiThread(2, "eNB_thread", eNBMachine, user, password , task_eNB_compile, False, timeout_thread)
thread_UE = oaiThread(3, "UE_thread", UEMachine, user, password , task_UE_compile, False, timeout_thread)
if RRHMachine != '':
thread_RRH = oaiThread(4, "RRH_thread", RRHMachine, user, password , task_RRH_compile, False, timeout_thread)
threads=[]
threads.append(thread_eNB)
threads.append(thread_UE)
threads.append(thread_EPC)
if RRHMachine != '':
threads.append(thread_RRH)
# Start new Threads
thread_eNB.start()
thread_UE.start()
thread_EPC.start()
if RRHMachine != '':
thread_RRH.start()
#Wait for all the compile threads to complete
for t in threads:
t.join()
......@@ -855,26 +911,29 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
thread_EPC = oaiThread(1, "EPC_thread", EPCMachine, user, password , task_EPC, False, timeout_thread)
thread_eNB = oaiThread(2, "eNB_thread", eNBMachine, user, password , task_eNB, False, timeout_thread)
thread_UE = oaiThread(3, "UE_thread", UEMachine, user, password , task_UE, False, timeout_thread)
if RRHMachine != '':
thread_RRH = oaiThread(4, "RRH_thread", RRHMachine, user, password , task_RRH, False, timeout_thread)
threads=[]
threads.append(thread_eNB)
threads.append(thread_UE)
threads.append(thread_EPC)
if RRHMachine != '':
threads.append(thread_RRH)
# Start new Threads
thread_eNB.start()
thread_UE.start()
thread_EPC.start()
if RRHMachine != '':
thread_RRH.start()
#Wait for all the compile threads to complete
for t in threads:
t.join()
#Now we get the log files from remote machines on the local machine
cleanOldProgramsAllMachines([oai_eNB, oai_UE, oai_EPC] , oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
#cleanOldPrograms(oai_eNB, oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
#cleanOldPrograms(oai_UE, oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
#cleanOldPrograms(oai_EPC, oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
if RRHMachine != '':
cleanOldProgramsAllMachines([oai_eNB, oai_UE, oai_EPC, oai_RRH] , oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
else:
cleanOldProgramsAllMachines([oai_eNB, oai_UE, oai_EPC] , oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
logfile_UE_stop_script_out = logdir_UE + '/UE_stop_script_out' + '_' + str(run) + '_.log'
logfile_UE_stop_script = logdir_local_testcase + '/UE_stop_script' + '_' + str(run) + '_.log'
......@@ -902,22 +961,23 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
res= oai_EPC.send_recv(cmd)
print "Changing permissions of logdir <" + logdir_EPC + "> in EPC machine..." + res
if RRHMachine != '':
cmd = 'sudo -E chown -R ' + user + ' ' + logdir_RRH
res= oai_RRH.send_recv(cmd)
print "Changing permissions of logdir <" + logdir_RRH + "> in RRH machine..." + res
print "Copying files from EPCMachine : " + EPCMachine + "logdir_EPC = " + logdir_EPC
#ssh = SSHSession(EPCMachine , username=user, key_file=None, password=password)
#ssh.get_all(logdir_EPC , logdir_local + '/cmake_targets/autotests/log/'+ testcasename)
SSHSessionWrapper(EPCMachine, user, None, password, logdir_EPC, logdir_local + '/cmake_targets/autotests/log/'+ testcasename, "get_all")
print "Copying files from eNBMachine " + eNBMachine + "logdir_eNB = " + logdir_eNB
#ssh = SSHSession(eNBMachine , username=user, key_file=None, password=password)
#ssh.get_all(logdir_eNB, logdir_local + '/cmake_targets/autotests/log/'+ testcasename)
SSHSessionWrapper(eNBMachine, user, None, password, logdir_eNB, logdir_local + '/cmake_targets/autotests/log/'+ testcasename, "get_all")
print "Copying files from UEMachine : " + UEMachine + "logdir_UE = " + logdir_UE
#ssh = SSHSession(UEMachine , username=user, key_file=None, password=password)
#ssh.get_all(logdir_UE , logdir_local + '/cmake_targets/autotests/log/'+ testcasename)
SSHSessionWrapper(UEMachine, user, None, password, logdir_UE, logdir_local + '/cmake_targets/autotests/log/'+ testcasename, "get_all")
if RRHMachine != '':
print "Copying files from RRHMachine : " + RRHMachine + "logdir_RRH = " + logdir_RRH
SSHSessionWrapper(RRHMachine, user, None, password, logdir_RRH, logdir_local + '/cmake_targets/autotests/log/'+ testcasename, "get_all")
#Currently we only perform throughput tests
......@@ -1019,8 +1079,8 @@ class oaiCleanOldProgramThread (threading.Thread):
error = error + '\n threadID = ' + str(self.threadID) + '\n threadname = ' + self.threadname + '\n CleanUpOldProgs = ' + self.CleanUpOldProgs + '\n CleanUpAluLteBox = ' + self.CleanUpAluLteBox + '\n ExmimoRfStop = ' + self.ExmimoRfStop + '\n'
error = error + traceback.format_exc()
print error
print "There is error in cleaning up old programs. The test case execution cannot continue...."
sys.exit(1)
print "There is error in cleaning up old programs....."
#sys.exit(1)
# \brief Run parallel threads in all machines for clean up old execution of test cases
# \param oai_list list of handlers that can be used to execute programs on remote machines
......
......@@ -6,11 +6,11 @@
<GitOpenair-cnRepo>https://gitlab.eurecom.fr/oai/openair-cn.git</GitOpenair-cnRepo>
<GitOAI5GRepoBranch>develop</GitOAI5GRepoBranch>
<GitOpenair-cnRepoBranch>develop</GitOpenair-cnRepoBranch>
<CleanUpOldProgs>oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* hss hss_sim configure_cots_bandrich_ue* wvdial* iperf iperf_script ping tshark</CleanUpOldProgs>
<CleanUpOldProgs>oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* hss hss_sim configure_cots_bandrich_ue* wvdial* iperf iperf_script ping tshark rrh_gw</CleanUpOldProgs>
<CleanUpAluLteBox>sudo -S -E /opt/ltebox/tools/stop_ltebox</CleanUpAluLteBox>
<ExmimoRfStop>$OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; uname -a; dmesg|tail</ExmimoRfStop>
<Timeout_execution>36000</Timeout_execution>
<TestCaseExclusionList>0102+ 0104+ 015502 015505 015506 015507 015508 015509 015510 015511 015602 015605 015702 015705 015802 015805 016002 016005 016102 016105 016302 016305 016502 016505 017002 017005</TestCaseExclusionList>
<TestCaseExclusionList>0102+ 0104+ 015502 015505 015506 015507 015508 015509 015510 015511 015602 015605 015702 015705 015802 015805 016002 016005 016102 016105 016302 016305 016502 016505 017002 017005 017502 017505</TestCaseExclusionList>
<nruns_lte-softmodem>3</nruns_lte-softmodem>
<MachineListGeneric>mozart calisson stevens nano amerique</MachineListGeneric>
<testCase id="010101" >
......@@ -5530,6 +5530,461 @@
<nruns>10</nruns>
</testCase>
<testCase id="017500" >
<class>lte-softmodem</class>
<desc></desc>
<RRH>calisson</RRH>
<UE>stevens</UE>
<EPC>amerique</EPC>
<eNB>mozart</eNB>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=5;tx_sample_advance=70;tx_scheduling_advance=9;"</eNB_config_file>
<RRH_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</RRH_compile_prog>
<RRH_compile_prog_args>--RRH -w USRP -t ETHERNET -c --disable-deadline </RRH_compile_prog_args>
<RRH_pre_exec></RRH_pre_exec>
<RRH_pre_exec_args></RRH_pre_exec_args>
<RRH_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw</RRH_main_exec>
<RRH_main_exec_args> -n1 -g3 -x -i eth1 </RRH_main_exec_args>
<RRH_terminate_missing_procs>False</RRH_terminate_missing_procs>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w None -t ETHERNET -x -c --disable-deadline </eNB_compile_prog_args>
<eNB_pre_exec></eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sleep 5; $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
<UE_compile_prog></UE_compile_prog>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file></EPC_config_file>
<EPC_compile_prog></EPC_compile_prog>
<EPC_compile_prog_args></EPC_compile_prog_args>
<HSS_compile_prog></HSS_compile_prog>
<HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.RRH.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="017501" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>calisson</eNB>
<UE>stevens</UE>
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec></eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
<UE_compile_prog></UE_compile_prog>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file></EPC_config_file>
<EPC_compile_prog></EPC_compile_prog>
<EPC_compile_prog_args></EPC_compile_prog_args>
<HSS_compile_prog></HSS_compile_prog>
<HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs>
<tags>USRPb210.RRH.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="017502" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>calisson</eNB>
<UE>stevens</UE>
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec></eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
<UE_compile_prog></UE_compile_prog>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file></EPC_config_file>
<EPC_compile_prog></EPC_compile_prog>
<EPC_compile_prog_args></EPC_compile_prog_args>
<HSS_compile_prog></HSS_compile_prog>
<HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs>
<tags>USRPb210.RRH.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="017503" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>calisson</eNB>
<UE>stevens</UE>
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec></eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
<UE_compile_prog></UE_compile_prog>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<UE_search_expr_true>throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file></EPC_config_file>
<EPC_compile_prog></EPC_compile_prog>
<EPC_compile_prog_args></EPC_compile_prog_args>
<HSS_compile_prog></HSS_compile_prog>
<HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs>
<tags>USRPb210.RRH.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="017504" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>calisson</eNB>
<UE>stevens</UE>
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
<eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec></eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
<eNB_search_expr_false></eNB_search_expr_false>
<eNB_terminate_missing_procs>True</eNB_terminate_missing_procs>
<UE_working_dir>/tmp</UE_working_dir>
<UE_config_file></UE_config_file>
<UE_compile_prog_args></UE_compile_prog_args>
<UE_pre_exec></UE_pre_exec>
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>True</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file></EPC_config_file>
<EPC_compile_prog></EPC_compile_prog>
<EPC_compile_prog_args></EPC_compile_prog_args>
<HSS_compile_prog></HSS_compile_prog>
<HSS_compile_prog_args></HSS_compile_prog_args>
<EPC_pre_exec></EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
<EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>True</EPC_terminate_missing_procs>
<tags>USRPb210.RRH.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX</tags>
<nruns>10</nruns>
</testCase>
<testCase id="017505" >
<class>lte-softmodem</class>
<desc></desc>
<eNB>calisson</eNB>
<UE>stevens</UE>
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir></