Commit 647ed853 authored by Elena Lukashova's avatar Elena Lukashova
Browse files

Adapting PHY code to work with mex-functions:

1. Moving get_pmi into a separate file and making corresponding
changes in CMakeLists.txt.
2. Creating PHY_MEX library with functions required for the receiver
mex-functions.
3. Making necessary changes in defs_UE.h so that mex-functions
do not complain about multiple LOG_ calls.
parent 1d765027
......@@ -669,6 +669,7 @@ add_boolean_option(SMBV False "Rohde&Schwarz SMBV100A vector
add_boolean_option(DEBUG_PHY False "Enable PHY layer debugging options")
add_boolean_option(DEBUG_PHY_PROC False "Enable debugging of PHY layer procedures")
add_boolean_option(DEBUG_DLSCH False "Enable debugging of DLSCH physical layer channel")
add_boolean_option(MEX False "Enabling compilation with mex")
##########################
# NAS LAYER OPTIONS
......@@ -1177,6 +1178,7 @@ set(PHY_SRC_UE
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/sss_ue.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_demodulation.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/get_pmi.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/linear_preprocessing_rec.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_decoding.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dci_tools_ue.c
......@@ -1225,6 +1227,27 @@ add_library(PHY ${PHY_SRC})
add_library(PHY_UE ${PHY_SRC_UE})
add_library(PHY_RU ${PHY_SRC_RU})
#Library for mex functions
#########################3
set(PHY_MEX_UE
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/linear_preprocessing_rec.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_demodulation.c
${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/lte_mcs.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/get_pmi.c
${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pmch_common.c
${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation_avx2.c
${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ue_measurements.c
${OPENAIR2_DIR}/UTIL/LOG/log.c
)
add_library(PHY_MEX ${PHY_MEX_UE})
#Layer 2 library
#####################
set(MAC_DIR ${OPENAIR2_DIR}/LAYER2/MAC)
......
......@@ -165,49 +165,6 @@ int8_t delta_PUSCH_acc[4] = {-1,0,1,3};
int8_t *delta_PUCCH_lut = delta_PUSCH_acc;
uint8_t get_pmi(uint8_t N_RB_DL, MIMO_mode_t mode, uint32_t pmi_alloc,uint16_t rb)
{
/*
MIMO_mode_t mode = dlsch_harq->mimo_mode;
uint32_t pmi_alloc = dlsch_harq->pmi_alloc;
*/
switch (N_RB_DL) {
case 6: // 1 PRB per subband
if (mode <= PUSCH_PRECODING1)
return((pmi_alloc>>(rb<<1))&3);
else
return((pmi_alloc>>rb)&1);
break;
default:
case 25: // 4 PRBs per subband
if (mode <= PUSCH_PRECODING1)
return((pmi_alloc>>((rb>>2)<<1))&3);
else
return((pmi_alloc>>(rb>>2))&1);
break;
case 50: // 6 PRBs per subband
if (mode <= PUSCH_PRECODING1)
return((pmi_alloc>>((rb/6)<<1))&3);
else
return((pmi_alloc>>(rb/6))&1);
break;
case 100: // 8 PRBs per subband
if (mode <= PUSCH_PRECODING1)
return((pmi_alloc>>((rb>>3)<<1))&3);
else
return((pmi_alloc>>(rb>>3))&1);
break;
}
}
uint32_t check_phich_reg(LTE_DL_FRAME_PARMS *frame_parms,uint32_t kprime,uint8_t lprime,uint8_t mi)
{
......
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#include "PHY/LTE_UE_TRANSPORT/transport_proto_ue.h"
uint8_t get_pmi(uint8_t N_RB_DL, MIMO_mode_t mode, uint32_t pmi_alloc,uint16_t rb)
{
/*
MIMO_mode_t mode = dlsch_harq->mimo_mode;
uint32_t pmi_alloc = dlsch_harq->pmi_alloc;
*/
switch (N_RB_DL) {
case 6: // 1 PRB per subband
if (mode <= PUSCH_PRECODING1)
return((pmi_alloc>>(rb<<1))&3);
else
return((pmi_alloc>>rb)&1);
break;
default:
case 25: // 4 PRBs per subband
if (mode <= PUSCH_PRECODING1)
return((pmi_alloc>>((rb>>2)<<1))&3);
else
return((pmi_alloc>>(rb>>2))&1);
break;
case 50: // 6 PRBs per subband
if (mode <= PUSCH_PRECODING1)
return((pmi_alloc>>((rb/6)<<1))&3);
else
return((pmi_alloc>>(rb/6))&1);
break;
case 100: // 8 PRBs per subband
if (mode <= PUSCH_PRECODING1)
return((pmi_alloc>>((rb>>3)<<1))&3);
else
return((pmi_alloc>>(rb>>3))&1);
break;
}
}
......@@ -69,6 +69,38 @@
#include <pthread.h>
#include "assertions.h"
#ifdef MEX
#include "mex.h"
# define msg mexPrintf
# undef LOG_D
# undef LOG_E
# undef LOG_I
# undef LOG_N
# undef LOG_T
# undef LOG_W
# undef LOG_M
# define LOG_D(x, ...) mexPrintf(__VA_ARGS__)
# define LOG_E(x, ...) mexPrintf(__VA_ARGS__)
# define LOG_I(x, ...) mexPrintf(__VA_ARGS__)
# define LOG_N(x, ...) mexPrintf(__VA_ARGS__)
# define LOG_T(x, ...) mexPrintf(__VA_ARGS__)
# define LOG_W(x, ...) mexPrintf(__VA_ARGS__)
# define LOG_M(x, ...) mexPrintf(__VA_ARGS__)
#else
# ifdef OPENAIR2
# if ENABLE_RAL
# include "collection/hashtable/hashtable.h"
# include "COMMON/ral_messages_types.h"
# include "UTIL/queue.h"
# endif
# include "log.h"
# define msg(aRGS...) LOG_D(PHY, ##aRGS)
# else
# define msg printf
# endif
#endif
/// Context data structure for RX/TX portion of subframe processing
typedef struct {
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment