Commit 667a4987 authored by Rohit Gupta's avatar Rohit Gupta

Merge branch 'develop' into Feature-6-fix_test_core_network_with_scenarios

parents 85ea6023 47352355
...@@ -189,6 +189,22 @@ Obj.# Case# Test# Description ...@@ -189,6 +189,22 @@ Obj.# Case# Test# Description
01 75 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX 01 75 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 75 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX 01 75 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 80 00 lte-softmodem + RRH tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 80 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 80 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 80 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 80 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 80 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 80 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 85 00 lte-softmodem + RRH tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 85 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 85 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 85 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 85 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 85 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 85 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 64 lte-softmodem-noS1 tests 01 64 lte-softmodem-noS1 tests
......
...@@ -12,7 +12,7 @@ trap handle_ctrl_c INT ...@@ -12,7 +12,7 @@ trap handle_ctrl_c INT
source $OPENAIR_DIR/cmake_targets/tools/test_helper source $OPENAIR_DIR/cmake_targets/tools/test_helper
#SUDO="sudo -E " SUDO="sudo -E -S"
tdir=$OPENAIR_DIR/cmake_targets/autotests tdir=$OPENAIR_DIR/cmake_targets/autotests
rm -fr $tdir/bin rm -fr $tdir/bin
mkdir -p $tdir/bin mkdir -p $tdir/bin
...@@ -404,14 +404,12 @@ until [ -z "$1" ] ...@@ -404,14 +404,12 @@ until [ -z "$1" ]
esac esac
done done
if [ "$SET_PASSWORD" == "1" ]; then if [ "$SET_PASSWORD" != "1" ]; then
mypassword=$passwd read -s -p "Enter Password: " passwd
else
read -s -p "Enter Password: " mypassword
fi fi
tmpfile=`mktemp` tmpfile=`mktemp`
echo \'$passwd\' | $SUDO echo $HOME >& $tmpfile echo $passwd | $SUDO echo $HOME > $tmpfile
tstsudo=`cat $tmpfile` tstsudo=`cat $tmpfile`
if [ "$tstsudo" != "$HOME" ]; then if [ "$tstsudo" != "$HOME" ]; then
echo "$USER might not have sudo privileges. Exiting" echo "$USER might not have sudo privileges. Exiting"
...@@ -509,7 +507,7 @@ for search_expr in "${test_case_array[@]}" ...@@ -509,7 +507,7 @@ for search_expr in "${test_case_array[@]}"
if [ "$class" == "compilation" ]; then if [ "$class" == "compilation" ]; then
test_compile "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" test_compile "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags"
elif [ "$class" == "execution" ]; then elif [ "$class" == "execution" ]; then
$SUDO killall -q oaisim_nos1 echo \'passwd\' | $SUDO killall -q oaisim_nos1
test_compile_and_run "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" "$mypassword" "$test_config_file" test_compile_and_run "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" "$mypassword" "$test_config_file"
else else
echo "Unexpected class of test case...Skipping the test case $name ...." echo "Unexpected class of test case...Skipping the test case $name ...."
......
This diff is collapsed.
...@@ -42,13 +42,13 @@ THIS_SCRIPT_PATH=$(dirname $(readlink -f $0)) ...@@ -42,13 +42,13 @@ THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
source $THIS_SCRIPT_PATH/tools/build_helper source $THIS_SCRIPT_PATH/tools/build_helper
MSC_GEN="False" MSC_GEN="False"
XFORMS="False" XFORMS="True"
PRINT_STATS="False" PRINT_STATS="False"
VCD_TIMING="False" VCD_TIMING="False"
LOWLATENCY_FLAG_USER="False" LOWLATENCY_FLAG_USER="False"
FORCE_LOWLATENCY_FLAG_USER="" FORCE_LOWLATENCY_FLAG_USER=""
REL="Rel10" REL="Rel10"
HW="EXMIMO" HW="None"
TP="None" TP="None"
NOS1=0 NOS1=0
EPC=0 EPC=0
...@@ -91,7 +91,7 @@ Options ...@@ -91,7 +91,7 @@ Options
default is Rel10, default is Rel10,
Rel8 limits the implementation to 3GPP Release 8 version Rel8 limits the implementation to 3GPP Release 8 version
-w | --hardware -w | --hardware
EXMIMO (Default), USRP, BLADERF, LMSSDR, None EXMIMO, USRP, BLADERF, ETHERNET, LMSSDR, None (Default)
Adds this RF board support (in external packages installation and in compilation) Adds this RF board support (in external packages installation and in compilation)
-t | --transport protocol -t | --transport protocol
ETHERNET , None ETHERNET , None
...@@ -760,9 +760,9 @@ fi ...@@ -760,9 +760,9 @@ fi
rm -fr $OPENAIR_DIR/cmake_targets/autotests/log rm -fr $OPENAIR_DIR/cmake_targets/autotests/log
mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log
if [ "$RUN_GROUP" -eq "1" ]; then if [ "$RUN_GROUP" -eq "1" ]; then
$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" -p '$mypassword' >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log & $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" -p $mypassword >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
else else
$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -p '$mypassword' >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log & $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -p $mypassword >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
fi fi
wait wait
else else
......
...@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 2.8) ...@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 2.8)
set(PACKAGE_NAME "unitary_tests_simulators") set(PACKAGE_NAME "unitary_tests_simulators")
set(PHYSIM True) set(PHYSIM True)
set(RF_BOARD None) set(RF_BOARD None)
set(XFORMS False) set(XFORMS True)
set(DEBUG_PHY False) set(DEBUG_PHY False)
set(MU_RECIEVER False) set(MU_RECIEVER False)
......
...@@ -290,7 +290,7 @@ install_asn1c_from_source(){ ...@@ -290,7 +290,7 @@ install_asn1c_from_source(){
asn1_install_dir=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt asn1_install_dir=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_dir " echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_dir "
( (
rm -rf /tmp/asn1c-r1516 $SUDO rm -rf /tmp/asn1c-r1516
mkdir -p /tmp/asn1c-r1516 mkdir -p /tmp/asn1c-r1516
cd /tmp/asn1c-r1516 cd /tmp/asn1c-r1516
rm -rf /tmp/asn1c-r1516/* rm -rf /tmp/asn1c-r1516/*
......
...@@ -29,9 +29,9 @@ ...@@ -29,9 +29,9 @@
################################################################################ ################################################################################
# file run_enb_s1_usrp # file run_enb_s1_usrp
# brief run script for eNB USRP. # brief run script for eNB USRP.
# author Lionel GAUTHIER # author Lionel GAUTHIER and Navid Nikaein
# company Eurecom # company Eurecom
# email: lionel.gauthier@eurecom.fr # email: lionel.gauthier@eurecom.fr and navid.nikaein@eurecom.fr
################################ ################################
...@@ -56,6 +56,8 @@ function help() ...@@ -56,6 +56,8 @@ function help()
echo_error "Mandatory arguments to long options are mandatory for short options too." echo_error "Mandatory arguments to long options are mandatory for short options too."
echo_error " -g, --gdb Run with GDB." echo_error " -g, --gdb Run with GDB."
echo_error " -h, --help Print this help." echo_error " -h, --help Print this help."
echo_error " -e, --ulsch-max-errors num-errs maximum allowed number of uplink errors"
echo_error " -f, --rf-config-file filename RF specific configuration file"
echo_error " -K, --itti-dump-file filename ITTI dump file containing all ITTI events occuring during EPC runtime.(can omit file name if last argument)" echo_error " -K, --itti-dump-file filename ITTI dump file containing all ITTI events occuring during EPC runtime.(can omit file name if last argument)"
echo_error " -M, --target-dl-mcs mcs Downlink target MCS." echo_error " -M, --target-dl-mcs mcs Downlink target MCS."
echo_error " -m, --mscgen directory Generate mscgen output files in a directory" echo_error " -m, --mscgen directory Generate mscgen output files in a directory"
...@@ -137,7 +139,27 @@ function main() ...@@ -137,7 +139,27 @@ function main()
shift; shift;
exit 0 exit 0
;; ;;
-K | --itti-dump-file) -e | --ulsch-max-errors)
ulsch_max_errors=$2
echo "setting --ulsch-max-errors to $ulsch_max_errors"
exe_arguments="$exe_arguments --ulsch-max-errors=$ulsch_max_errors"
shift 2;
;;
-f | --rf-config-file)
rf_config_file=$2
# can omit file name if last arg on the line
if [ "x$rf_config_file" = "x" ]; then
rf_config_file=null
shift 1;
else
shift 2;
fi
if [ "$rf_config_file" != "null" ]; then
echo "setting --rf-config-file to $rf_config_file"
exe_arguments="$exe_arguments --rf-config-file=$rf_config_file"
fi
;;
-K | --itti-dump-file)
itti_dump_file=$2 itti_dump_file=$2
# can omit file name if last arg on the line # can omit file name if last arg on the line
if [ "x$itti_dump_file" = "x" ]; then if [ "x$itti_dump_file" = "x" ]; then
......
...@@ -38,23 +38,16 @@ extern int card; ...@@ -38,23 +38,16 @@ extern int card;
#endif #endif
void void
phy_adjust_gain (PHY_VARS_UE *phy_vars_ue, uint8_t eNB_id) phy_adjust_gain (PHY_VARS_UE *phy_vars_ue, uint32_t rx_power_fil_dB, uint8_t eNB_id)
{ {
uint16_t rx_power_fil_dB;
#ifdef EXMIMO #ifdef EXMIMO
exmimo_config_t *p_exmimo_config = openair0_exmimo_pci[card].exmimo_config_ptr; exmimo_config_t *p_exmimo_config = openair0_exmimo_pci[card].exmimo_config_ptr;
uint16_t i; uint16_t i;
#endif #endif
int rssi;
rssi = dB_fixed(phy_vars_ue->PHY_measurements.rssi);
if (rssi>0) rx_power_fil_dB = rssi;
else rx_power_fil_dB = phy_vars_ue->PHY_measurements.rx_power_avg_dB[eNB_id];
LOG_D(PHY,"Gain control: rssi %d (%d,%d)\n", LOG_D(PHY,"Gain control: rssi %d (%d,%d)\n",
rssi, rx_power_fil_dB,
phy_vars_ue->PHY_measurements.rssi, phy_vars_ue->PHY_measurements.rssi,
phy_vars_ue->PHY_measurements.rx_power_avg_dB[eNB_id] phy_vars_ue->PHY_measurements.rx_power_avg_dB[eNB_id]
); );
......
...@@ -213,6 +213,7 @@ int8_t set_RSRQ_filtered(module_id_t Mod_id,uint8_t CC_id,uint8_t eNB_index,floa ...@@ -213,6 +213,7 @@ int8_t set_RSRQ_filtered(module_id_t Mod_id,uint8_t CC_id,uint8_t eNB_index,floa
//! Automatic gain control //! Automatic gain control
void phy_adjust_gain (PHY_VARS_UE *phy_vars_ue, void phy_adjust_gain (PHY_VARS_UE *phy_vars_ue,
uint32_t rx_power_fil_dB,
unsigned char eNB_id); unsigned char eNB_id);
int lte_ul_channel_estimation(PHY_VARS_eNB *phy_vars_eNB, int lte_ul_channel_estimation(PHY_VARS_eNB *phy_vars_eNB,
......
...@@ -483,13 +483,10 @@ int lte_sync_time(int **rxdata, ///rx data in time domain ...@@ -483,13 +483,10 @@ int lte_sync_time(int **rxdata, ///rx data in time domain
*eNB_id = sync_source; *eNB_id = sync_source;
#ifdef DEBUG_PHY LOG_D(PHY,"[UE] lte_sync_time: Sync source = %d, Peak found at pos %d, val = %d (%d dB)\n",sync_source,peak_pos,peak_val,dB_fixed(peak_val)/2);
msg("[PHY][UE] lte_sync_time: Sync source = %d, Peak found at pos %d, val = %d\n",
sync_source,peak_pos,peak_val);
#ifdef DEBUG_PHY
if (debug_cnt == 0) { if (debug_cnt == 0) {
write_output("sync_corr0_ue.m","synccorr0",sync_corr_ue0,2*length,1,2); write_output("sync_corr0_ue.m","synccorr0",sync_corr_ue0,2*length,1,2);
write_output("sync_corr1_ue.m","synccorr1",sync_corr_ue1,2*length,1,2); write_output("sync_corr1_ue.m","synccorr1",sync_corr_ue1,2*length,1,2);
......
...@@ -280,7 +280,6 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode) ...@@ -280,7 +280,6 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
uint8_t flip_fdd_ncp,flip_fdd_ecp,flip_tdd_ncp,flip_tdd_ecp; uint8_t flip_fdd_ncp,flip_fdd_ecp,flip_tdd_ncp,flip_tdd_ecp;
// uint16_t Nid_cell_fdd_ncp=0,Nid_cell_fdd_ecp=0,Nid_cell_tdd_ncp=0,Nid_cell_tdd_ecp=0; // uint16_t Nid_cell_fdd_ncp=0,Nid_cell_fdd_ecp=0,Nid_cell_tdd_ncp=0,Nid_cell_tdd_ecp=0;
LTE_DL_FRAME_PARMS *frame_parms = &phy_vars_ue->lte_frame_parms; LTE_DL_FRAME_PARMS *frame_parms = &phy_vars_ue->lte_frame_parms;
int i;
int ret=-1; int ret=-1;
int aarx,rx_power=0; int aarx,rx_power=0;
/*#ifdef OAI_USRP /*#ifdef OAI_USRP
...@@ -309,34 +308,6 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode) ...@@ -309,34 +308,6 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
LOG_I(PHY,"[UE%d] Initial sync : Estimated PSS position %d, Nid2 %d\n",phy_vars_ue->Mod_id,sync_pos,phy_vars_ue->lte_ue_common_vars.eNb_id); LOG_I(PHY,"[UE%d] Initial sync : Estimated PSS position %d, Nid2 %d\n",phy_vars_ue->Mod_id,sync_pos,phy_vars_ue->lte_ue_common_vars.eNb_id);
#endif #endif
for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
rx_power += signal_energy(&phy_vars_ue->lte_ue_common_vars.rxdata[aarx][sync_pos2],
frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] = dB_fixed(rx_power/frame_parms->nb_antennas_rx);
#ifdef DEBUG_INITIAL_SYNCH
LOG_I(PHY,"[UE%d] Initial sync : Estimated power: %d dB\n",phy_vars_ue->Mod_id,phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] );
#endif
#ifdef EXMIMO
if ((openair_daq_vars.rx_gain_mode == DAQ_AGC_ON) &&
(mode != rx_calib_ue) && (mode != rx_calib_ue_med) && (mode != rx_calib_ue_byp) )
//phy_adjust_gain(phy_vars_ue,0);
gain_control_all(phy_vars_ue->PHY_measurements.rx_power_avg_dB[0],0);
#else
#ifndef OAI_USRP
#ifndef OAI_BLADERF
#ifndef OAI_LMSSDR
phy_adjust_gain(phy_vars_ue,0);
#endif
#endif
#endif
#endif
// SSS detection // SSS detection
// PSS is hypothesized in last symbol of first slot in Frame // PSS is hypothesized in last symbol of first slot in Frame
...@@ -525,20 +496,20 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode) ...@@ -525,20 +496,20 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
#endif #endif
if (phy_vars_ue->UE_scan_carrier == 0) { if (phy_vars_ue->UE_scan_carrier == 0) {
#ifdef OPENAIR2 if (phy_vars_ue->mac_enabled==1) {
LOG_I(PHY,"[UE%d] Sending synch status to higher layers\n",phy_vars_ue->Mod_id); LOG_I(PHY,"[UE%d] Sending synch status to higher layers\n",phy_vars_ue->Mod_id);
//mac_resynch(); //mac_resynch();
mac_xface->dl_phy_sync_success(phy_vars_ue->Mod_id,phy_vars_ue->frame_rx,0,1);//phy_vars_ue->lte_ue_common_vars.eNb_id); mac_xface->dl_phy_sync_success(phy_vars_ue->Mod_id,phy_vars_ue->frame_rx,0,1);//phy_vars_ue->lte_ue_common_vars.eNb_id);
#endif //OPENAIR2 phy_vars_ue->UE_mode[0] = PRACH;
}
else {
phy_vars_ue->UE_mode[0] = PUSCH;
}
generate_pcfich_reg_mapping(frame_parms); generate_pcfich_reg_mapping(frame_parms);
generate_phich_reg_mapping(frame_parms); generate_phich_reg_mapping(frame_parms);
// init_prach625(frame_parms); // init_prach625(frame_parms);
#ifndef OPENAIR2
phy_vars_ue->UE_mode[0] = PUSCH;
#else
phy_vars_ue->UE_mode[0] = PRACH;
#endif
//phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors=0; //phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors=0;
phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors_conseq=0; phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors_conseq=0;
//phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors_last=0; //phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors_last=0;
...@@ -592,6 +563,65 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode) ...@@ -592,6 +563,65 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
} }
// gain control
if (ret!=0) { //we are not synched, so we cannot use rssi measurement (which is based on channel estimates)
rx_power = 0;
// do a measurement on the best guess of the PSS
for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
rx_power += signal_energy(&phy_vars_ue->lte_ue_common_vars.rxdata[aarx][sync_pos2],
frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
/*
// do a measurement on the full frame
for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
rx_power += signal_energy(&phy_vars_ue->lte_ue_common_vars.rxdata[aarx][0],
frame_parms->samples_per_tti*10);
*/
// we might add a low-pass filter here later
phy_vars_ue->PHY_measurements.rx_power_avg[0] = rx_power/frame_parms->nb_antennas_rx;
phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] = dB_fixed(phy_vars_ue->PHY_measurements.rx_power_avg[0]);
#ifdef DEBUG_INITIAL_SYNCH
LOG_I(PHY,"[UE%d] Initial sync : Estimated power: %d dB\n",phy_vars_ue->Mod_id,phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] );
#endif
#ifdef EXMIMO
if ((openair_daq_vars.rx_gain_mode == DAQ_AGC_ON) &&
(mode != rx_calib_ue) && (mode != rx_calib_ue_med) && (mode != rx_calib_ue_byp) )
//phy_adjust_gain(phy_vars_ue,0);
gain_control_all(phy_vars_ue->PHY_measurements.rx_power_avg_dB[0],0);
#else
#ifndef OAI_USRP
#ifndef OAI_BLADERF
#ifndef OAI_LMSSDR
phy_adjust_gain(phy_vars_ue,phy_vars_ue->PHY_measurements.rx_power_avg_dB[0],0);
#endif
#endif
#endif
#endif
}
else {
#ifdef EXMIMO
if ((openair_daq_vars.rx_gain_mode == DAQ_AGC_ON) &&
(mode != rx_calib_ue) && (mode != rx_calib_ue_med) && (mode != rx_calib_ue_byp) )
//phy_adjust_gain(phy_vars_ue,0);
gain_control_all(dB_fixed(phy_vars_ue->PHY_measurements.rssi),0);
#else
#ifndef OAI_USRP
#ifndef OAI_BLADERF
#ifndef OAI_LMSSDR
phy_adjust_gain(phy_vars_ue,dB_fixed(phy_vars_ue->PHY_measurements.rssi),0);
#endif
#endif
#endif
#endif
}
// exit_fun("debug exit"); // exit_fun("debug exit");
return ret; return ret;
} }
......
...@@ -107,10 +107,10 @@ int dump_ue_stats(PHY_VARS_UE *phy_vars_ue, char* buffer, int length, runmode_t ...@@ -107,10 +107,10 @@ int dump_ue_stats(PHY_VARS_UE *phy_vars_ue, char* buffer, int length, runmode_t
len += sprintf(&buffer[len], "[UE PROC] timing_advance = %d\n",phy_vars_ue->timing_advance); len += sprintf(&buffer[len], "[UE PROC] timing_advance = %d\n",phy_vars_ue->timing_advance);
if (phy_vars_ue->UE_mode[0]==PUSCH) { if (phy_vars_ue->UE_mode[0]==PUSCH) {
len += sprintf(&buffer[len], "[UE PROC] Po_PUSCH = %d dBm (PL %d dB, Po_NOMINAL_PUSCH %d dBm, PHR %d dB)\n", len += sprintf(&buffer[len], "[UE PROC] Po_PUSCH = %d dBm (PL %d dB, Po_NOMINAL_PUSCH %d dBm, PHR %d dB)\n",
PHY_vars_UE_g[0][0]->ulsch_ue[0]->Po_PUSCH, phy_vars_ue->ulsch_ue[0]->Po_PUSCH,
get_PL(phy_vars_ue->Mod_id,phy_vars_ue->CC_id,0), get_PL(phy_vars_ue->Mod_id,phy_vars_ue->CC_id,0),
mac_xface->get_Po_NOMINAL_PUSCH(phy_vars_ue->Mod_id,0), phy_vars_ue->lte_frame_parms.ul_power_control_config_common.p0_NominalPUSCH,
PHY_vars_UE_g[0][0]->ulsch_ue[0]->PHR); phy_vars_ue->ulsch_ue[0]->PHR);
len += sprintf(&buffer[len], "[UE PROC] Po_PUCCH = %d dBm (Po_NOMINAL_PUCCH %d dBm, g_pucch %d dB)\n", len += sprintf(&buffer[len], "[UE PROC] Po_PUCCH = %d dBm (Po_NOMINAL_PUCCH %d dBm, g_pucch %d dB)\n",
get_PL(phy_vars_ue->Mod_id,phy_vars_ue->CC_id,0)+ get_PL(phy_vars_ue->Mod_id,phy_vars_ue->CC_id,0)+
phy_vars_ue->lte_frame_parms.ul_power_control_config_common.p0_NominalPUCCH+ phy_vars_ue->lte_frame_parms.ul_power_control_config_common.p0_NominalPUCCH+
...@@ -582,9 +582,7 @@ int dump_eNB_stats(PHY_VARS_eNB *phy_vars_eNB, char* buffer, int length) ...@@ -582,9 +582,7 @@ int dump_eNB_stats(PHY_VARS_eNB *phy_vars_eNB, char* buffer, int length)
len += sprintf(&buffer[len],"%4d ", len += sprintf(&buffer[len],"%4d ",
phy_vars_eNB->PHY_measurements_eNB[eNB].n0_subband_power_tot_dBm[i]); phy_vars_eNB->PHY_measurements_eNB[eNB].n0_subband_power_tot_dBm[i]);
if ((i>0) && ((i%25) == 0)) if ((i>0) && ((i%25) == 0))
len += sprintf(&buffer[len],"\n ", len += sprintf(&buffer[len],"\n");
phy_vars_eNB->PHY_measurements_eNB[eNB].n0_subband_power_tot_dBm[i]);
} }
len += sprintf(&buffer[len],"\n"); len += sprintf(&buffer[len],"\n");
len += sprintf(&buffer[len],"\n[eNB PROC] PERFORMANCE PARAMETERS\n"); len += sprintf(&buffer[len],"\n[eNB PROC] PERFORMANCE PARAMETERS\n");
...@@ -644,7 +642,6 @@ int dump_eNB_stats(PHY_VARS_eNB *phy_vars_eNB, char* buffer, int length) ...@@ -644,7 +642,6 @@ int dump_eNB_stats(PHY_VARS_eNB *phy_vars_eNB, char* buffer, int length)
dB_fixed(phy_vars_eNB->eNB_UE_stats[UE_id].Po_PUCCH/phy_vars_eNB->lte_frame_parms.N_RB_UL)-phy_vars_eNB->rx_total_gain_eNB_dB, dB_fixed(phy_vars_eNB->eNB_UE_stats[UE_id].Po_PUCCH/phy_vars_eNB->lte_frame_parms.N_RB_UL)-phy_vars_eNB->rx_total_gain_eNB_dB,
phy_vars_eNB->lte_frame_parms.ul_power_control_config_common.p0_NominalPUCCH, phy_vars_eNB->lte_frame_parms.ul_power_control_config_common.p0_NominalPUCCH,
dB_fixed(phy_vars_eNB->eNB_UE_stats[UE_id].Po_PUCCH1_below/phy_vars_eNB->lte_frame_parms.N_RB_UL)-phy_vars_eNB->rx_total_gain_eNB_dB, dB_fixed(phy_vars_eNB->eNB_UE_stats[UE_id].Po_PUCCH1_below/phy_vars_eNB->lte_frame_parms.N_RB_UL)-phy_vars_eNB->rx_total_gain_eNB_dB,
dB_fixed(phy_vars_eNB->eNB_UE_stats[UE_id].Po_PUCCH1_above/phy_vars_eNB->lte_frame_parms.N_RB_UL)-phy_vars_eNB->rx_total_gain_eNB_dB,
PUCCH1_THRES+phy_vars_eNB->PHY_measurements_eNB[0].n0_power_tot_dBm-dB_fixed(phy_vars_eNB->lte_frame_parms.N_RB_UL), PUCCH1_THRES+phy_vars_eNB->PHY_measurements_eNB[0].n0_power_tot_dBm-dB_fixed(phy_vars_eNB->lte_frame_parms.N_RB_UL),
phy_vars_eNB->eNB_UE_stats[UE_id].sector); phy_vars_eNB->eNB_UE_stats[UE_id].sector);
......
...@@ -278,6 +278,9 @@ typedef struct PHY_VARS_eNB_s { ...@@ -278,6 +278,9 @@ typedef struct PHY_VARS_eNB_s {
int **dl_precoder_SeNB[3]; int **dl_precoder_SeNB[3];
char log2_maxp; /// holds the maximum channel/precoder coefficient char log2_maxp; /// holds the maximum channel/precoder coefficient
/// if ==0 enables phy only test mode
int mac_enabled;
/// For emulation only (used by UE abstraction to retrieve DCI) /// For emulation only (used by UE abstraction to retrieve DCI)
uint8_t num_common_dci[2]; // num_dci in even/odd subframes uint8_t num_common_dci[2]; // num_dci in even/odd subframes
uint8_t num_ue_spec_dci[2]; // num_dci in even/odd subframes uint8_t num_ue_spec_dci[2]; // num_dci in even/odd subframes
...@@ -579,6 +582,9 @@ typedef struct { ...@@ -579,6 +582,9 @@ typedef struct {
/// holds the maximum channel/precoder coefficient /// holds the maximum channel/precoder coefficient
char log2_maxp; char log2_maxp;
/// if ==0 enables phy only test mode
int mac_enabled;
/// Flag to initialize averaging of PHY measurements /// Flag to initialize averaging of PHY measurements
int init_averaging; int init_averaging;
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
...@@ -61,25 +61,7 @@ ...@@ -61,25 +61,7 @@
extern unsigned int dlsch_tbs25[27][25],TBStable[27][110]; extern unsigned int dlsch_tbs25[27][25],TBStable[27][110];
extern unsigned char offset_mumimo_llr_drange_fix; extern unsigned char offset_mumimo_llr_drange_fix;
#ifdef XFORMS
#include "PHY/TOOLS/lte_phy_scope.h" #include "PHY/TOOLS/lte_phy_scope.h"
#endif
//#define AWGN
//#define NO_DCI
//#define ABSTRACTION
/*
#define RBmask0 0x00fc00fc
#define RBmask1 0x0
#define RBmask2 0x0
#define RBmask3 0x0
*/
PHY_VARS_eNB *PHY_vars_eNB; PHY_VARS_eNB *PHY_vars_eNB;
PHY_VARS_UE *PHY_vars_UE; PHY_VARS_UE *PHY_vars_UE;
...@@ -237,10 +219,9 @@ int main(int argc, char **argv) ...@@ -237,10 +219,9 @@ int main(int argc, char **argv)
short *uncoded_ber_bit=NULL; short *uncoded_ber_bit=NULL;
uint8_t N_RB_DL=25,osf=1; uint8_t N_RB_DL=25,osf=1;
frame_t frame_type = FDD; frame_t frame_type = FDD;
#ifdef XFORMS int xforms=0;
FD_lte_phy_scope_ue *form_ue; FD_lte_phy_scope_ue *form_ue;
char title[255]; char title[255];
#endif
uint32_t DLSCH_RB_ALLOC = 0x1fff; uint32_t DLSCH_RB_ALLOC = 0x1fff;
int numCCE=0;