Commit 7e31cb2a authored by knopp's avatar knopp
Browse files

Merge branch 'develop' of https://gitlab.eurecom.fr/oai/openairinterface5g into develop

Conflicts:
	openair1/PHY/LTE_ESTIMATION/lte_dl_mbsfn_channel_estimation.c
	openair1/PHY/TOOLS/lte_dfts.c
	openair1/SIMULATION/LTE_PHY/dlsim.c
parents d54fe24f 3a29458b
......@@ -7,6 +7,7 @@ job1:
- echo $NFS_SHARE_DIR
- echo $EXTERNAL_SHARE_DIR
- echo $SHELL
- echo $OAI_TEST_CASE_GROUP
- git rev-parse --abbrev-ref HEAD
- git_repo=`git config --get remote.origin.url`
- git_head=`git rev-parse HEAD`
......
......@@ -171,13 +171,13 @@ set(CMAKE_CXX_FLAGS
#########################
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,-rpath -Wl,${OPENAIR_TARGETS}/bin")
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,-rpath -Wl,${CMAKE_CURRENT_BINARY_DIR}")
#########################
# set a flag for changes in the source code
# these changes are related to hardcoded path to include .h files
add_definitions(-DCMAKER)
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O2")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O3")
set(GIT_BRANCH "UNKNOWN")
......@@ -261,6 +261,7 @@ endif (${ENABLE_ITTI})
add_boolean_option(RTAI False "Use RTAI")
if (${RTAI})
set(LOWLATENCY False)
set(CPU_AFFINITY False)
add_definitions("-DENABLE_RTAI_CLOCK")
add_definitions("-DCONFIG_RTAI_LXRT_INLINE")
include_directories ("/usr/realtime/include")
......@@ -564,7 +565,6 @@ elseif (${RF_BOARD} STREQUAL "OAI_BLADERF")
LINK_DIRECTORIES("/usr/lib/x86_64-linux-gnu")
set(option_HW_lib "bladeRF -rdynamic -ldl")
#set(LOWLATENCY False)
elseif (${RF_BOARD} STREQUAL "OAI_LMSSDR")
include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB")
......@@ -577,7 +577,6 @@ elseif (${RF_BOARD} STREQUAL "OAI_LMSSDR")
LINK_DIRECTORIES("${CMAKE_CURRENT_BINARY_DIR}/lms7002m")
LINK_DIRECTORIES("${CMAKE_CURRENT_BINARY_DIR}/Si5351C")
set(HW_SOURCE ${HW_SOURCE} ${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp)
set(LOWLATENCY False)
set(option_HW_lib "-lLMS_SDR -lLMS7002M -lSi5351C -rdynamic -ldl")
elseif (${RF_BOARD} STREQUAL "CPRIGW")
......@@ -607,6 +606,7 @@ endif (${TRANSP_PRO} STREQUAL "ETHERNET")
include_directories ("${OPENAIR_TARGETS}/ARCH/COMMON")
Message("LOWLATENCY flag is ${LOWLATENCY}")
Message("CPU_Affinity flag is ${CPU_AFFINITY}")
##############################################################
# ???!!! TO BE DOCUMENTED OPTIONS !!!???
......@@ -620,6 +620,7 @@ add_boolean_option(RRC_DEFAULT_RAB_IS_AM False "set the RLC mode to AM for the d
add_boolean_option(OAI_NW_DRIVER_TYPE_ETHERNET False "????")
add_boolean_option(DISABLE_USE_NAS False "???")
add_boolean_option(LOWLATENCY True "Use the Linux scheduler SCHED_DEADLINE: kernel >= 3.14")
add_boolean_option(CPU_AFFINITY False "Enable CPU Affinity of threads (only valid without deadline scheduler). It is enabled only with >2 CPUs")
add_boolean_option(NAS_ADDRESS_FIX False "specific to oaisim: for nasmesh driver")
add_boolean_option(NAS_NETLINK False "???? Must be True to compile nasmesh driver without rtai")
add_boolean_option(OAISIM False "specific to oaisim")
......@@ -996,6 +997,7 @@ set(PHY_SRC
${OPENAIR1_DIR}/PHY/CODING/crc_byte.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder_sse_8bit.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder_sse_16bit.c
${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder_avx2_16bit.c
${OPENAIR1_DIR}/PHY/CODING/lte_rate_matching.c
${OPENAIR1_DIR}/PHY/CODING/rate_matching.c
${OPENAIR1_DIR}/PHY/CODING/viterbi.c
......@@ -1098,8 +1100,8 @@ set (ENB_APP_SRC
add_library(L2
${L2_SRC}
${MAC_SRC}
${ENB_APP_SRC}
${OPENAIR2_DIR}/RRC/L2_INTERFACE/openair_rrc_L2_interface.c)
${ENB_APP_SRC})
# ${OPENAIR2_DIR}/RRC/L2_INTERFACE/openair_rrc_L2_interface.c)
# L3 Libs
##########################
......@@ -2013,38 +2015,4 @@ endforeach(file)
ADD_CUSTOM_TARGET(oarf
DEPENDS ${OCT_FILES}
)
#CMAKE INSTALL and CPACK
#INSTALL(PROGRAMS lte-softmodem ${OPENAIR_DIR}/targets DESTINATION bin)
#INSTALL(PROGRAMS oaisim ${OPENAIR_DIR}/targets DESTINATION bin)
#SET(CPACK_PACKAGE_DESCRIPTION_SUMMARY "OpenAirInterface")
#SET(CPACK_PACKAGE_VENDOR "Eurecom")
#SET(CPACK_PACKAGE_DESCRIPTION_FILE "${OPENAIR_DIR}/README.txt")
#SET(CPACK_RESOURCE_FILE_LICENSE "${OPENAIR_DIR}/COPYING")
#SET(CPACK_PACKAGE_VERSION_MAJOR "1")
#SET(CPACK_PACKAGE_VERSION_MINOR "1")
#SET(CPACK_PACKAGE_VERSION_PATCH "1")
#SET(CPACK_PACKAGE_INSTALL_DIRECTORY "CMake ${CMake_VERSION_MAJOR}.${CMake_VERSION_MINOR}")
#SET(CPACK_STRIP_FILES "${OPENAIR_TARGETS}/bin")
#SET(CPACK_SOURCE_STRIP_FILES "")
##debian specific
#SET(CPACK_DEBIAN_PACKAGE_NAME "OAI")
#SET(CPACK_DEBIAN_PACKAGE_VERSION "${CMake_VERSION_MAJOR}.${CMake_VERSION_MINOR}")
##dpkg --print-architecture (do not use i686
#SET(CPACK_DEBIAN_PACKAGE_ARCHITECTURE "amd64")
#SET(CPACK_DEBIAN_PACKAGE_DEPENDS "libc6 (>= 2.3.1-6), libgcc1 (>= 1:3.4.2-12)")
#SET(CPACK_DEBIAN_PACKAGE_DEPENDS "libpthread.so.0 libm.so.6 libconfig.so.9 librt.so.1 libcrypt.so.1 libcrypto.so.1.0.0 libnettle.so.4 libsctp.so.1 libc.so.6")
#SET(CPACK_DEBIAN_PACKAGE_MAINTAINER "EURECOM-OSA")
#SET(CPACK_PACKAGE_EXECUTABLES "lte-softmodem" "mme_gw.Rel10" "openair-hss")
#SET(CPACK_DEBIAN_PACKAGE_DESCRIPTION "OpenAirInterface")
#SET(CPACK_DEBIAN_PACKAGE_Section "Beta-Release")
#INCLUDE(CPack)
......@@ -205,6 +205,14 @@ Obj.# Case# Test# Description
01 85 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 85 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
02 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Sony Experia M4 COTS UE for TX/1RX
02 55 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
02 55 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
02 55 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
02 55 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
02 55 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
02 55 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 64 lte-softmodem-noS1 tests
......
#!/bin/bash
#******************************************************************************
# OpenAirInterface
# Copyright(c) 1999 - 2014 Eurecom
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
# *******************************************************************************/
# \author Navid Nikaein, Rohit Gupta
if [ -s $OPENAIR_DIR/cmake_targets/tools/build_helper ] ; then
source $OPENAIR_DIR/cmake_targets/tools/build_helper
......@@ -111,6 +141,8 @@ function test_compile() {
compile_log_dir=`eval echo \"$OPENAIR_DIR/cmake_targets/log/\"`
echo "Removing compilation log files in $compile_log_dir"
rm -frv $compile_log_dir
echo "Executing $pre_exec_file $pre_exe_args ...."
eval $pre_exec_file $pre_exec_args
echo "Executing $compile_prog $compile_prog_args ...."
eval $compile_prog $compile_prog_args
echo "Copying compilation log files to test case log directory: $log_dir"
......@@ -280,7 +312,7 @@ function test_compile_and_run() {
if [ -n "$pre_exec_file" ]; then
{ echo " Executing $pre_exec_file $pre_exec_args "
eval " echo '$mypassword' |sudo -S -E $pre_exec_file $pre_exec_args " ; }>> $temp_exec_log 2>&1
eval " $pre_exec_file $pre_exec_args " ; }>> $temp_exec_log 2>&1
fi
echo "Executing $main_exec $main_exec_args_array_index "
......@@ -503,6 +535,7 @@ for search_expr in "${test_case_array[@]}"
echo "search_expr_false = $search_expr_false"
echo "nruns = $nruns"
#eval $pre_exec
compile_prog_out=`eval echo \"$compile_prog_out\"`
......
......@@ -321,13 +321,19 @@ def cleanOldPrograms(oai, programList, CleanUpAluLteBox, ExmimoRfStop):
print "Killing old programs..." + result
programArray = programList.split()
programListJoin = '|'.join(programArray)
cmd = " ( date ;echo \"Starting cleaning old programs.. \" ; dmesg|tail )>& $HOME/.oai_test_setup_cleanup.log.`hostname` 2>&1 ; sync"
result=oai.send_recv(cmd)
cmd = cleanupOldProgramsScript + ' ' + '\''+programListJoin+'\''
#result = oai.send_recv(cmd)
#print result
result = oai.send_expect_false(cmd, 'Match found', False)
print "Looking for old programs..." + result
res=oai.send_recv(CleanUpAluLteBox, True)
res = oai.send_recv(ExmimoRfStop, False)
cmd = "( " + ExmimoRfStop + " ) >> $HOME/.oai_test_setup_cleanup.log.`hostname` ; sync "
res=oai.send_recv(cmd, False)
#res = oai.send_recv(ExmimoRfStop, False)
cmd = " ( date ;echo \"Finished cleaning old programs.. \" ; dmesg | tail)>> $HOME/.oai_test_setup_cleanup.log.`hostname` 2>&1 ; sync"
res=oai.send_recv(cmd)
# \brief Class thread to launch a generic command on remote machine
# \param threadID number of thread (for book keeping)
......@@ -1514,6 +1520,23 @@ for testcase in testcaseList:
threadListGlobal = wait_testcaseclass_generic_threads(threadListGlobal, Timeout_execution)
#cleanOldProgramsAllMachines(oai_list, CleanUpOldProgs, CleanUpAluLteBox, ExmimoRfStop)
handle_testcaseclass_softmodem (testcase, CleanUpOldProgs, logdirOAI5GRepo, logdirOpenaircnRepo, MachineList, user, pw, CleanUpAluLteBox, ExmimoRfStop, nruns_lte_softmodem, Timeout_cmd )
#The lines below are copied from below to trace the failure of some of the machines in test setup. These lines below need to be removed in long term
print "Creating xml file for overall results..."
cmd = "cat $OPENAIR_DIR/cmake_targets/autotests/log/*/*.xml > $OPENAIR_DIR/cmake_targets/autotests/log/results_autotests.xml "
res=os.system(cmd)
os.system('sync')
print "Now copying files to NFS Share"
oai_localhost = openair('localdomain','localhost')
oai_localhost.connect(user,pw)
cmd = ' rm -fr ' + NFSTestsResultsDir + ' ; mkdir -p ' + NFSTestsResultsDir
res = oai_localhost.send_recv(cmd)
print "Deleting NFSTestResults Dir..." + res
print "Copying files from GilabCI Runner Machine : " + host + " .locallogdir = " + locallogdir + ", NFSTestsResultsDir = " + NFSTestsResultsDir
SSHSessionWrapper('localhost', user, None, pw , NFSTestsResultsDir , locallogdir, "put_all")
oai_localhost.disconnect()
elif (testcaseclass == 'compilation'):
threadListGlobal = handle_testcaseclass_generic (testcasename, threadListGlobal, CleanUpOldProgs, logdirOAI5GRepo, MachineListGeneric, user, pw, CleanUpAluLteBox,Timeout_execution, ExmimoRfStop)
elif (testcaseclass == 'execution'):
......@@ -1551,5 +1574,6 @@ print "Deleting NFSTestResults Dir..." + res
print "Copying files from GilabCI Runner Machine : " + host + " .locallogdir = " + locallogdir + ", NFSTestsResultsDir = " + NFSTestsResultsDir
SSHSessionWrapper('localhost', user, None, pw , NFSTestsResultsDir , locallogdir, "put_all")
oai_localhost.disconnect()
sys.exit()
This source diff could not be displayed because it is too large. You can view the blob instead.
#!/usr/bin/python
#******************************************************************************
# OpenAirInterface
# Copyright(c) 1999 - 2014 Eurecom
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
# *******************************************************************************/
# \author Navid Nikaein, Rohit Gupta
import time
import serial
......@@ -28,17 +58,22 @@ from lib_autotest import *
def find_open_port():
global serial_port, ser
max_ports=100
if os.path.exists(serial_port) == True:
return serial_port
for port in range(2,100):
serial_port = '/dev/ttyUSB'+str(port)
if os.path.exists(serial_port) == True:
print 'New Serial Port : ' + serial_port
break
ser = serial.Serial(port=serial_port)
return
serial_port=''
while True:
if os.path.exists(serial_port) == True:
return serial_port
for port in range(2,100):
serial_port_tmp = '/dev/ttyUSB'+str(port)
if os.path.exists(serial_port_tmp) == True:
print 'New Serial Port : ' + serial_port_tmp
serial_port = serial_port_tmp
break
if serial_port == '':
print" Not able to detect valid serial ports. Resetting the modem now..."
reset_ue()
else :
ser = serial.Serial(port=serial_port)
return
#serial_port = '/dev/ttyUSB2'
......
#!/usr/bin/python
#******************************************************************************
# OpenAirInterface
# Copyright(c) 1999 - 2014 Eurecom
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
# *******************************************************************************/
# \author Navid Nikaein, Rohit Gupta
import time
import serial
......@@ -28,16 +58,23 @@ from lib_autotest import *
def find_open_port():
global serial_port, ser
max_ports=100
if os.path.exists(serial_port) == True:
return serial_port
for port in range(0,100):
serial_port = '/dev/ttyUSB'+str(port)
if os.path.exists(serial_port) == True:
print 'New Serial Port : ' + serial_port
break
serial_port=''
while True:
if os.path.exists(serial_port) == True:
return serial_port
for port in range(2,100):
serial_port_tmp = '/dev/ttyUSB'+str(port)
if os.path.exists(serial_port_tmp) == True:
print 'New Serial Port : ' + serial_port_tmp
serial_port = serial_port_tmp
break
if serial_port == '':
print" Not able to detect valid serial ports. Resetting the modem now..."
reset_ue()
else :
ser = serial.Serial(port=serial_port)
return
ser = serial.Serial(port=serial_port)
return
......@@ -143,11 +180,16 @@ def start_ue () :
thread_ppp.join()
def stop_ue():
timeout=60
os.system('killall wvdial')
send_command('AT', 'OK' , timeout)
send_command('AT+CGATT=0' , 'OK|ERROR' , timeout)
#send_command('AT+CFUN=4' , 'OK' , timeout)
stringIdBandrich='Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard'
status, out = commands.getstatusoutput('lsusb | grep -i \'' + stringIdBandrich + '\'')
if (out == '') :
print "Huawei E398 Adapter not found. Exiting now..."
sys.exit()
timeout=60
os.system('killall wvdial')
send_command('AT', 'OK' , timeout)
send_command('AT+CGATT=0' , 'OK|ERROR' , timeout)
#send_command('AT+CFUN=4' , 'OK' , timeout)
#reset the USB BUS of Bandrich UE
......@@ -155,7 +197,7 @@ def reset_ue():
stringIdBandrich='Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard'
status, out = commands.getstatusoutput('lsusb | grep -i \'' + stringIdBandrich + '\'')
if (out == '') :
print "Bandrich 4G LTE Adapter not found. Exiting now..."
print "Huawei E398 Adapter not found. Exiting now..."
sys.exit()
p=re.compile('Bus\s*(\w+)\s*Device\s*(\w+):\s*ID\s*(\w+):(\w+)')
res=p.findall(out)
......
#!/usr/bin/python
import time
import serial
import os
from pyroute2 import IPRoute
import sys
import re
import threading
import signal
import traceback
import os
import commands
# Find a device ID by running sudo adb devices
# The device ID below is for Sony Xperia M4
device_id='YT9115PX1E'
openair_dir = os.environ.get('OPENAIR_DIR')
if openair_dir == None:
print "Error getting OPENAIR_DIR environment variable"
sys.exit(1)
sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/'))
from lib_autotest import *
def signal_handler(signal, frame):
print('You pressed Ctrl+C!')
print('Exiting now...')
timeout=10
exit_flag=1
sys.exit(0)
signal.signal(signal.SIGINT, signal_handler)
# Find all the process IDs in a phone given the name of process
def kill_processes(name):
print " Killing all processes by name..." + name
while 1:
cmd = 'sudo adb -s ' + device_id +' shell "ps |grep ' + name + '"'
status, out = commands.getstatusoutput(cmd)
if status != 0:
print "Error execting command to kill process " + name
sys.exit(1)
print "Out = " + out
if out=='':
break;
out_arr = out.split()
pid_to_kill = out_arr[1]
print "Now killing process ID " + pid_to_kill + " on Phone"
cmd = 'sudo adb -s ' + device_id +' shell "kill ' + pid_to_kill + '"'
status, out = commands.getstatusoutput(cmd)
if status != 0:
print "Error execting command to kill process " + name
sys.exit(1)
print "Out = " + out
def start_ue () :
#print 'Enter your commands below.\r\nInsert "exit" to leave the application.'
print 'Killing old iperf/ping sessions'
kill_processes('iperf')
kill_processes('ping')
print "Turning off airplane mode"
os.system('sudo -E adb devices')
os.system('sudo -E adb -s ' + device_id + ' shell \"settings put global airplane_mode_on 0; am broadcast -a android.intent.action.AIRPLANE_MODE --ez state false\"')
while 1:
time.sleep ( 2)
#Now we check if ppp0 interface is up and running
try:
cmd = 'sudo adb -s ' + device_id + ' shell netcfg |grep 192.'
status, out = commands.getstatusoutput(cmd)
if (out == '') :
print "Waiting for UE to connect and get IP Address..."
else :
print "UE is now connected. IP Address settings are..." + out
os.system('sleep 5')
os.system ('sudo adb -s ' + device_id + ' shell ping ' + gw)
break
except Exception, e:
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
error = error + traceback.format_exc()
print error
def stop_ue():
print "Turning on airplane mode"
os.system('sudo adb devices')
os.system('sudo adb -s ' + device_id + ' shell \"settings put global airplane_mode_on 1; am broadcast -a android.intent.action.AIRPLANE_MODE --ez state true\" ')
print "Killing iperf/ping sessions"
kill_processes('iperf')
kill_processes('ping')
i=1
gw='192.172.0.1'
while i < len(sys.argv):
arg=sys.argv[i]
if arg == '--start-ue' :
start_ue()
elif arg == '--stop-ue' :
stop_ue()
elif arg == '-gw' :
gw = sys.argv[i+1]
i=i+1
elif arg == '-h' :
print "--stop-ue: Stop the UE. Turn on airplane mode"
print "--start-ue: Start the UE. Turn off airplane mode"
print "-gw: Specify the default gw as sometimes the gateway/route arguments are not set properly via wvdial"
else :
print " Script called with wrong arguments, arg = " + arg
sys.exit()
i = i +1
#!/bin/bash
#******************************************************************************
# OpenAirInterface
# Copyright(c) 1999 - 2014 Eurecom
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
# *******************************************************************************/
# \author Navid Nikaein, Rohit Gupta
#arg1 idVendor
#arg2 idProduct
......
#!/bin/bash
#******************************************************************************
# OpenAirInterface
# Copyright(c) 1999 - 2014 Eurecom
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
# *******************************************************************************/
# \author Navid Nikaein, Rohit Gupta