Skip to content

GitLab

openairinterface5G
openairinterface5G
Commit 852775ac authored by Rohit Gupta's avatar Rohit Gupta
Browse files
Options

cherry pick commits from bugfix-48-L1L2signalling to develop

parent 0ddf4208
Hide whitespace changes
Inline Side-by-side
Showing with 36 additions and 17 deletions
cmake_targets/CMakeLists.txt
View file @ 852775ac
......@@ -171,13 +171,13 @@ set(CMAKE_CXX_FLAGS
#########################
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,-rpath -Wl,${OPENAIR_TARGETS}/bin")
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,-rpath -Wl,${CMAKE_CURRENT_BINARY_DIR}")
#########################
# set a flag for changes in the source code
# these changes are related to hardcoded path to include .h files
add_definitions(-DCMAKER)
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O2")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O3")
set(GIT_BRANCH "UNKNOWN")
......
cmake_targets/autotests/test_case_list.xml
View file @ 852775ac
......@@ -4638,7 +4638,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py</eNB_pre_exec>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
......@@ -4714,7 +4714,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py</eNB_pre_exec>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
......@@ -4789,7 +4789,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py</eNB_pre_exec>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
......@@ -4864,7 +4864,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py</eNB_pre_exec>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
......@@ -4938,7 +4938,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py</eNB_pre_exec>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
......@@ -5012,7 +5012,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w BLADERF -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py</eNB_pre_exec>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
......
targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
View file @ 852775ac
......@@ -597,11 +597,10 @@ extern "C" {
openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
bw_gain_adjust=1;
}
s->usrp->set_master_clock_rate(30.72e6);
switch ((int)openair0_cfg[0].sample_rate) {
case 30720000:
// from usrp_time_offset
s->usrp->set_master_clock_rate(30.72e6);
openair0_cfg[0].samples_per_packet = 4096;
openair0_cfg[0].tx_sample_advance = 115;
openair0_cfg[0].tx_bw = 20e6;
......@@ -609,6 +608,7 @@ extern "C" {
openair0_cfg[0].tx_scheduling_advance = 11*openair0_cfg[0].samples_per_packet;
break;
case 23040000:
s->usrp->set_master_clock_rate(23.04e6); //to be checked
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].tx_sample_advance = 113;
openair0_cfg[0].tx_bw = 20e6;
......@@ -616,20 +616,23 @@ extern "C" {
openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
break;
case 15360000:
s->usrp->set_master_clock_rate(30.72e06);
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].tx_sample_advance = 113;
openair0_cfg[0].tx_sample_advance = 103;
openair0_cfg[0].tx_bw = 20e6;
openair0_cfg[0].rx_bw = 20e6;
openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
openair0_cfg[0].tx_scheduling_advance = 10240;
break;
case 7680000:
s->usrp->set_master_clock_rate(30.72e6);
openair0_cfg[0].samples_per_packet = 1024;
openair0_cfg[0].tx_sample_advance = 70;//103;
openair0_cfg[0].tx_sample_advance = 80;
openair0_cfg[0].tx_bw = 20e6;
openair0_cfg[0].rx_bw = 20e6;
openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
break;
case 1920000:
s->usrp->set_master_clock_rate(7.68e6);
openair0_cfg[0].samples_per_packet = 256;
openair0_cfg[0].tx_sample_advance = 40;
openair0_cfg[0].tx_bw = 20e6;
......@@ -652,8 +655,8 @@ extern "C" {
for(i=0;i<s->usrp->get_rx_num_channels();i++) {
if (i<openair0_cfg[0].rx_num_channels) {
s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
//s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
//printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
......@@ -673,8 +676,8 @@ extern "C" {
for(i=0;i<s->usrp->get_tx_num_channels();i++) {
if (i<openair0_cfg[0].tx_num_channels) {
s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
//s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
//printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
}
......@@ -683,6 +686,8 @@ extern "C" {
// display USRP settings
std::cout << boost::format("Actual master clock: %fMHz...") % (s->usrp->get_master_clock_rate()/1e6) << std::endl;
sleep(1);
// create tx & rx streamer
uhd::stream_args_t stream_args_rx("sc16", "sc16");
......@@ -701,6 +706,20 @@ extern "C" {
std::cout << boost::format("tx_max_num_samps %u") % (s->tx_stream->get_max_num_samps()) << std::endl;
/* Setting TX/RX BW after streamers are created due to USRP calibration issue */
for(i=0;i<s->usrp->get_tx_num_channels();i++) {
if (i<openair0_cfg[0].tx_num_channels) {
s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
}
}
for(i=0;i<s->usrp->get_rx_num_channels();i++) {
if (i<openair0_cfg[0].rx_num_channels) {
s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
}
}
s->usrp->set_time_now(uhd::time_spec_t(0.0));
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment