Commit a2a00d22 authored by Raphael Defosseux's avatar Raphael Defosseux
Browse files

CI: Improvements on the COTS-UE bench script


  * added banner to pipeline script
  * added parameters to Jenkins pipeline / python
    * xmlfile and test stage
  * eNB configuration files are located under ci-scripts/conf_files
    * no more correction of MNC
    * still correction of EPC / eNB IP addresses at runtime
    * Initialize_eNB_args is back using the proper "-O " syntax
  * Terminate stage is parallel as in FJU's original pipeline
  * Log collection stage is back fully parallel
  * Console as artifact an option
  * Check if terminate calls ended well, to be repeated at the end
  * Adding back iperf:
    * selection of iperf vs iperf3
    * adding some iperf testcases to test suite
  * Better enb launch
Signed-off-by: Raphael Defosseux's avatarRaphael Defosseux <raphael.defosseux@eurecom.fr>
parent f911895b
//
// Comments
#!/bin/groovy
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
// Template Jenkins Declarative Pipeline script to run Test w/ RF HW
// Location of the python executor node shall be in the same subnet as the others servers
def pythonExecutor = params.pythonExecutor
// Location of the test XML file to be run
def testXMLFile = params.pythonTestXmlFile
// Name of the test stage
def testStageName = params.pipelineTestStageName
// Terminate Status
def termUE = 0
def termENB = 1
def termSPGW = 2
def termMME = 3
def termHSS = 4
def termStatusArray = new Boolean[termHSS + 1]
termStatusArray[termUE] = false
termStatusArray[termENB] = false
termStatusArray[termSPGW] = false
termStatusArray[termMME] = false
termStatusArray[termHSS] = false
def eNB_Repository
def eNB_Branch
def eNB_CommitID
pipeline {
// The node should be selected with a 'label' parameter
// trying to use NodeLabel plugin to pass it, currently failing to do so
agent {
label 'starsky'
label pythonExecutor
}
options {
disableConcurrentBuilds()
......@@ -17,16 +62,22 @@ pipeline {
// You can use them as template
/*
parameters {
//node-test parameters
string(name: 'pythonExecutor', defaultValue: 'nodea', description: 'Node where the pipeline - python scripts will be executed')
string(name: 'pythonTestXmlFile', defaultValue: 'enb_usrpB210_band7_50PRB.xml', description: 'Location of the Test XML to be run')
string(name: 'pipelineTestStageName', defaultValue: 'Test COTS-UE - OAI eNB - LTEBOX EPC', description: 'Naming of the Test Stage')
booleanParam(name: 'pipelineZipsConsoleLog', defaultValue: 'True', description: 'If true, the pipeline script retrieves the job console log, zips it and archives it as artifact')
//eNB parameters
string(name: 'eNB_IPAddress', defaultValue: '192.168.XX.XX', description: 'IP Address of eNB')
credentials(name: 'eNB_Credentials', defaultValue: 'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX', credentialType: "Username with password", required: true, description: 'Credentials for eNB')
string(name: 'eNB_SourceCodePath', defaultValue: '/home/starsky/CI-enb', description: 'Full path of eNB source code')
string(name: 'eNB_SourceCodePath', defaultValue: '/tmp/CI-enb', description: 'Full path of eNB source code')
//EPC parameters
string(name: 'EPC_IPAddress', defaultValue: '192.168.XX.XX', description: 'IP Address of EPC')
string(name: 'EPC_Type', defaultValue: 'OAI', description: 'EPC type: OAI or ltebox')
string(name: 'EPC_Type', defaultValue: 'ltebox', description: 'EPC type: OAI or ltebox')
credentials(name: 'EPC_Credentials', defaultValue: 'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX', credentialType: "Username with password", required: true, description: 'Credentials for EPC')
string(name: 'EPC_SourceCodePath', defaultValue: '/home/nano/CI_oai-cn/openair-cn', description: 'Full path of EPC source code')
string(name: 'EPC_SourceCodePath', defaultValue: '/tmp/CI-enb', description: 'Full path of EPC source code')
//ADB server parameters
string(name: 'ADB_IPAddress', defaultValue: '192.168.XX.XX', description: 'IP Address of ADB server')
......@@ -38,11 +89,24 @@ pipeline {
stage ("Verify Parameters") {
steps {
script {
echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
def allParametersPresent = true
if (params.CI_MASTER_NODE != null) {
echo "eNB CI parameter node : $params.CI_MASTER_NODE"
// It is already to late to check it
if (params.pythonExecutor != null) {
echo "eNB CI executor node : ${pythonExecutor}"
}
// If not present picking a default XML file
if (params.pythonTestXmlFile == null) {
// picking default
testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml'
} else {
echo "eNB CI master node : $NODE_NAME"
echo "Test XML file : ${testXMLFile}"
}
// If not present picking a default Stage Name
if (params.pipelineTestStageName == null) {
// picking default
testStageName = 'Template Test Stage'
}
if (params.eNB_IPAddress == null) {
......@@ -54,6 +118,26 @@ pipeline {
if (params.eNB_Credentials == null) {
allParametersPresent = false
}
// the following 3 parameters should be pushed by the master trigger
// if not present, take the job GIT variables (used for developing)
if (params.eNB_Repository == null) {
eNB_Repository = env.GIT_URL
} else {
eNB_Repository = params.eNB_Repository
}
echo "eNB_Repository : ${eNB_Repository}"
if (params.eNB_Branch == null) {
eNB_Branch = env.GIT_BRANCH
} else {
eNB_Branch = params.eNB_Branch
}
echo "eNB_Branch : ${eNB_Branch}"
if (params.eNB_CommitID == null) {
eNB_CommitID = env.GIT_COMMIT
} else {
eNB_CommitID = params.eNB_CommitID
}
echo "eNB_CommitID : ${eNB_CommitID}"
if (params.EPC_IPAddress == null) {
allParametersPresent = false
......@@ -84,61 +168,110 @@ pipeline {
}
}
}
stage ("Build eNB") {
stage ("Build and Test") {
steps {
script {
dir ('ci-scripts') {
try {
echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
]) {
sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBRepository=${GIT_URL} --eNBBranch=${GIT_BRANCH} --eNBCommitID=${GIT_COMMIT} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=xml_files/build_enb_usrp_start_epc.xml"
sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBRepository=${eNB_Repository} --eNBBranch=${eNB_Branch} --eNBCommitID=${eNB_CommitID} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${testXMLFile}"
}
} catch (Exception e) {
sh "./ci-scripts/fail.sh"
currentBuild.result = 'FAILURE'
}
}
}
}
}
stage ("Test eNB - Band 7 - USRP210 - 5MHz") {
steps {
script {
dir ('ci-scripts') {
try {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
]) {
sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBRepository=${GIT_URL} --eNBBranch=${GIT_BRANCH} --eNBCommitID=${GIT_COMMIT} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=xml_files/enb_usrpB210_band7_50PRB.xml"
stage ("Terminate") {
parallel {
stage('Terminate UE') {
steps {
echo '\u2705 \u001B[32mTerminate UE\u001B[0m'
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
]) {
sh "python3 ci-scripts/main.py --mode=TerminateUE --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password}"
}
}
post {
success {
script {
termStatusArray[termUE] = true
}
} catch (Exception e) {
//sh "./ci-scripts/fail.sh"
currentBuild.result = 'FAILURE'
}
}
}
}
}
stage ("Terminate All") {
steps {
script {
dir ('ci-scripts') {
try {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
]) {
sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBRepository=${GIT_URL} --eNBBranch=${GIT_BRANCH} --eNBCommitID=${GIT_COMMIT} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=xml_files/terminate_epc.xml"
stage('Terminate eNB') {
steps {
echo '\u2705 \u001B[32mTerminate eNB\u001B[0m'
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
]) {
sh "python3 ci-scripts/main.py --mode=TerminateeNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
}
}
post {
success {
script {
termStatusArray[termENB] = true
}
}
}
}
stage('Terminate SPGW') {
steps {
echo '\u2705 \u001B[32mTerminate SPGW\u001B[0m'
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
]) {
sh "python3 ci-scripts/main.py --mode=TerminateSPGW --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
}
}
post {
success {
script {
termStatusArray[termSPGW] = true
}
}
}
}
stage('Terminate MME') {
steps {
echo '\u2705 \u001B[32mTerminate MME\u001B[0m'
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
]) {
sh "python3 ci-scripts/main.py --mode=TerminateMME --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
}
}
post {
success {
script {
termStatusArray[termMME] = true
}
}
}
}
stage('Terminate HSS') {
steps {
echo '\u2705 \u001B[32mTerminate HSS\u001B[0m'
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
]) {
sh "python3 ci-scripts/main.py --mode=TerminateHSS --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
}
}
post {
success {
script {
termStatusArray[termHSS] = true
}
} catch (Exception e) {
//sh "./ci-scripts/fail.sh"
currentBuild.result = 'FAILURE'
}
}
}
......@@ -146,71 +279,110 @@ pipeline {
}
stage('Log Collection') {
parallel {
stage('Log Collection (eNB)') {
stage('Log Collection (eNB - Build)') {
steps {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
]) {
echo '\u2705 \u001B[32mLog Collection (eNB - Build)\u001B[0m'
sh "python3 ci-scripts/main.py --mode=LogCollectBuild --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
echo '\u2705 \u001B[32mLog Transfer (eNB - Build)\u001B[0m'
sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/build.log.zip ./build.log.${env.BUILD_ID}.zip || true"
}
script {
if(fileExists("build.log.${env.BUILD_ID}.zip")) {
archiveArtifacts "build.log.${env.BUILD_ID}.zip"
}
}
}
}
stage('Log Collection (eNB - Run)') {
steps {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
]) {
echo '\u2705 \u001B[32mLog Collection (eNB - Run)\u001B[0m'
sh "python3 ci-scripts/main.py --mode=LogCollecteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
echo '\u2705 \u001B[32mLog Transfer (eNB - Run)\u001B[0m'
sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/enb.log.zip ./enb.log.${env.BUILD_ID}.zip || true"
}
script {
if(fileExists("enb.log.${env.BUILD_ID}.zip")) {
archiveArtifacts "enb.log.${env.BUILD_ID}.zip"
}
}
}
}
stage('Log Collection (SPGW)') {
steps {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
]) {
echo '\u2705 \u001B[32mLog Collection (SPGW)\u001B[0m'
sh "python3 ci-scripts/main.py --mode=LogCollectSPGW --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --EPCType=${params.EPC_Type}"
echo '\u2705 \u001B[32mLog Transfer (SPGW)\u001B[0m'
sh "sshpass -p \'${EPC_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${EPC_Username}@${params.EPC_IPAddress}:${EPC_SourceCodePath}/scripts/spgw.log.zip ./spgw.log.${env.BUILD_ID}.zip || true"
}
script {
if(fileExists("spgw.log.${env.BUILD_ID}.zip")) {
archiveArtifacts "spgw.log.${env.BUILD_ID}.zip"
}
}
}
}
stage('Log Collection (MME)') {
steps {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
]) {
echo '\u2705 \u001B[32mLog Collection (MME)\u001B[0m'
sh "python3 ci-scripts/main.py --mode=LogCollectMME --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --EPCType=${params.EPC_Type}"
echo '\u2705 \u001B[32mLog Transfer (MME)\u001B[0m'
sh "sshpass -p \'${EPC_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${EPC_Username}@${params.EPC_IPAddress}:${EPC_SourceCodePath}/scripts/mme.log.zip ./mme.log.${env.BUILD_ID}.zip || true"
}
script {
dir ('ci-scripts') {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
]) {
sh "python3 main.py --mode=LogCollectBuild --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
sh "python3 main.py --mode=LogCollecteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/build.log.zip ./build.log.${env.BUILD_ID}.zip || true"
sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/enb.log.zip ./enb.log.${env.BUILD_ID}.zip || true"
// No need to remove since we are wiping out the folder on the eNB server during build
// sh "sshpass -p \'${eNB_Password}\' ssh -t -t -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress} 'cd ${eNB_SourceCodePath}; cd cmake_targets; if [ -e build.log.zip ]; then rm build.log.zip; fi;'"
// sh "sshpass -p \'${eNB_Password}\' ssh -t -t -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress} 'cd ${eNB_SourceCodePath}; cd cmake_targets; if [ -e enb.log.zip ]; then rm enb.log.zip; fi;'"
if(fileExists("build.log.${env.BUILD_ID}.zip")) {
archiveArtifacts "build.log.${env.BUILD_ID}.zip"
// Same thing here, no need to remove.
// SCM folder is wiped out at build start on node
// sh "rm build.log.${env.BUILD_ID}.zip"
}
if(fileExists("enb.log.${env.BUILD_ID}.zip")) {
archiveArtifacts "enb.log.${env.BUILD_ID}.zip"
// Same thing here, no need to remove.
// SCM folder is wiped out at build start on node
// sh "rm enb.log.${env.BUILD_ID}.zip"
}
}
if(fileExists("mme.log.${env.BUILD_ID}.zip")) {
archiveArtifacts "mme.log.${env.BUILD_ID}.zip"
}
}
}
}
stage('Log Collection (EPC)') {
stage('Log Collection (HSS)') {
steps {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
]) {
echo '\u2705 \u001B[32mLog Collection (HSS)\u001B[0m'
sh "python3 ci-scripts/main.py --mode=LogCollectHSS --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --EPCType=${params.EPC_Type}"
echo '\u2705 \u001B[32mLog Transfer (HSS)\u001B[0m'
sh "sshpass -p \'${EPC_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${EPC_Username}@${params.EPC_IPAddress}:${EPC_SourceCodePath}/scripts/hss.log.zip ./hss.log.${env.BUILD_ID}.zip || true"
}
script {
dir ('ci-scripts') {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
]) {
sh "python3 main.py --mode=LogCollectSPGW --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --EPCType=${params.EPC_Type} "
sh "python3 main.py --mode=LogCollectMME --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --EPCType=${params.EPC_Type} "
sh "python3 main.py --mode=LogCollectHSS --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --EPCType=${params.EPC_Type} "
sh "python3 main.py --mode=LogCollectPing --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --EPCType=${params.EPC_Type} "
sh "sshpass -p \'${EPC_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${EPC_Username}@${params.EPC_IPAddress}:${EPC_SourceCodePath}/scripts/*.log.zip . || true"
if(fileExists("spgw.log.zip")) {
sh "mv spgw.log.zip ./spgw.log.${env.BUILD_ID}.zip"
archiveArtifacts "spgw.log.${env.BUILD_ID}.zip"
sh "rm spgw.log.${env.BUILD_ID}.zip"
}
if(fileExists("mme.log.zip")) {
sh "mv mme.log.zip ./mme.log.${env.BUILD_ID}.zip"
archiveArtifacts "mme.log.${env.BUILD_ID}.zip"
sh "rm mme.log.${env.BUILD_ID}.zip"
}
if(fileExists("hss.log.zip")) {
sh "mv hss.log.zip ./hss.log.${env.BUILD_ID}.zip"
archiveArtifacts "hss.log.${env.BUILD_ID}.zip"
sh "rm hss.log.${env.BUILD_ID}.zip"
}
if(fileExists("ping.log.zip")) {
sh "mv ping.log.zip ./ping.log.${env.BUILD_ID}.zip"
archiveArtifacts "ping.log.${env.BUILD_ID}.zip"
sh "rm ping.log.${env.BUILD_ID}.zip"
}
}
if(fileExists("hss.log.${env.BUILD_ID}.zip")) {
archiveArtifacts "hss.log.${env.BUILD_ID}.zip"
}
}
}
}
stage('Log Collection (Ping)') {
steps {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
]) {
echo '\u2705 \u001B[32mLog Collection (Ping)\u001B[0m'
sh "python3 ci-scripts/main.py --mode=LogCollectPing --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --EPCType=${params.EPC_Type}"
echo '\u2705 \u001B[32mLog Transfer (Ping)\u001B[0m'
sh "sshpass -p \'${EPC_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${EPC_Username}@${params.EPC_IPAddress}:${EPC_SourceCodePath}/scripts/ping.log.zip ./ping.log.${env.BUILD_ID}.zip || true"
}
script {
if(fileExists("ping.log.${env.BUILD_ID}.zip")) {
archiveArtifacts "ping.log.${env.BUILD_ID}.zip"
}
}
}
......@@ -221,32 +393,55 @@ pipeline {
post {
always {
echo "Archiving Jenkins console log"
// Not working in Eurecom environment
/*
sh "wget --no-check-certificate --no-proxy ${env.JENKINS_URL}/job/${env.JOB_NAME}/${env.BUILD_ID}/consoleText -O consoleText.log || true"
sh "zip -m consoleText.log.${env.BUILD_ID}.zip consoleText.log || true"
script {
if(fileExists("consoleText.log.${env.BUILD_ID}.zip")) {
archiveArtifacts "consoleText.log.${env.BUILD_ID}.zip"
sh "rm consoleText.log.${env.BUILD_ID}.zip"
if (params.pipelineZipsConsoleLog != null) {
if (params.pipelineZipsConsoleLog) {
echo "Archiving Jenkins console log"
sh "wget --no-check-certificate --no-proxy ${env.JENKINS_URL}/job/${env.JOB_NAME}/${env.BUILD_ID}/consoleText -O consoleText.log || true"
sh "zip -m consoleText.log.${env.BUILD_ID}.zip consoleText.log || true"
if(fileExists("consoleText.log.${env.BUILD_ID}.zip")) {
archiveArtifacts "consoleText.log.${env.BUILD_ID}.zip"
}
}
}
}
*/
}
// Making sure that we really shutdown every thing before leaving
failure {
script {
dir ('ci-scripts') {
try {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
]) {
sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBRepository=${GIT_URL} --eNBBranch=${GIT_BRANCH} --eNBCommitID=${GIT_COMMIT} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=xml_files/terminate_epc.xml"
}
} catch (Exception e) {
echo "could not properly terminate everything"
if (!termStatusArray[termUE]) {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
]) {
sh "python3 ci-scripts/main.py --mode=TerminateUE --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password}"
}
}
if (!termStatusArray[termENB]) {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
]) {
sh "python3 ci-scripts/main.py --mode=TerminateeNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
}
}
if (!termStatusArray[termSPGW]) {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
]) {
sh "python3 ci-scripts/main.py --mode=TerminateSPGW --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
}
}
if (!termStatusArray[termMME]) {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
]) {
sh "python3 ci-scripts/main.py --mode=TerminateMME --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
}
}
if (!termStatusArray[termHSS]) {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
]) {
sh "python3 ci-scripts/main.py --mode=TerminateHSS --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
}
}
}
......
Active_eNBs = ( "eNB-Eurecom-LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB-Eurecom-LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
tr_s_preference = "local_mac"
////////// Physical parameters:
component_carriers = (
{
node_function = "3GPP_eNODEB";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2685000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 100;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
pbch_repetition = "FALSE";
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 0;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower = -29;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/