Commit b33993f5 authored by Remi Hardy's avatar Remi Hardy

Update TESTING_GNB_W_COTS_UE.md

parent ec7d26d3
......@@ -5,7 +5,7 @@
* Commercial UE: Oppo Reno 5G
* OAI Software Defined gNB and eNB
* eNB RF front end: USRP (ETTUS) B200 Mini or B210
* gNB RF front end: USRP (ETTUS) B200 Mini or B210 (N300 will be needed for MIMO and wider BW's)
* gNB RF front end: USRP (ETTUS) B200 Mini or B210 (N310 will be needed for MIMO and wider BW's)
* 5G TDD duplexing mode
* 5G FR1 Band n78 (3.5 GHz)
* BW: 40MHz
......@@ -17,7 +17,7 @@ https://gitlab.eurecom.fr/oai/openairinterface5g/tree/develop
## Architecture Setup
photos and schemes
The scheme below depicts our typical setup:
![image info](./testing_gnb_w_cots_ue_resources/oai_fr1_setup.jpg)
......@@ -32,32 +32,27 @@ See https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/doc/BUILD.md#b
for reference:
https://github.com/OPENAIRINTERFACE/openair-epc-fed/blob/master-documentation/docs/DEPLOY_HOME.md
```
sudo bash
cd /opt/hss_sim0609
./starthss_real
sudo
```
- **eNB**
```
sudo bash
cd /opt/hss_sim0609
./starthss_real
sudo
```
- **gNB**
```
sudo bash
cd /opt/hss_sim0609
./starthss_real
sudo
```
## Conf Files
where are they
usage
where are the config files located
how to use them
## Run / Test
......@@ -65,9 +60,7 @@ usage
- **EPC** (on EPC host):
```
sudo bash
cd /opt/hss_sim0609
./starthss_real
sudo
```
Open another window and:
......@@ -75,8 +68,7 @@ Open another window and:
```
sudo bash
cd /opt/ltebox/tools
./stop_ltebox
./start_ltebox
```
Note: when terminated the testing session, you shall stop the EPC by "./stop_ltebox"
......@@ -99,15 +91,15 @@ Note: gNB is using branch NR_RRC_PRACH_procedures patched with gnb.diff
## Test Case
Test case description
Test case description : UE attachement
## Expected Logs to check
what and where to check
what logs and where to check, to ensure that your setup works fine
## Required traces for debug
What info/traces/logs are needed for us to support the debug
## Status of the interoperability
- setup of the CP in 4G
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment