Commit d33269a8 authored by Wang's avatar Wang

UE adding nr initial_sync

parent 37e09437
......@@ -1271,6 +1271,9 @@ set(PHY_SRC_UE
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/sss_nr.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/cic_filter_nr.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/dmrs_nr.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_initial_sync.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_pbch.c
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/
${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/srs_modulation_nr.c
${OPENAIR1_DIR}/PHY/NR_REFSIG/ul_ref_seq_nr.c
${OPENAIR1_DIR}/PHY/TOOLS/file_output.c
......
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.0 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*! \file PHY/LTE_TRANSPORT/initial_sync.c
* \brief Routines for initial UE synchronization procedure (PSS,SSS,PBCH and frame format detection)
* \author R. Knopp, F. Kaltenberger
* \date 2011
* \version 0.1
* \company Eurecom
* \email: knopp@eurecom.fr,kaltenberger@eurecom.fr
* \note
* \warning
*/
#include "PHY/types.h"
#include "PHY/defs_nr_UE.h"
#include "PHY/phy_extern_nr_ue.h"
//#include "SCHED/defs.h"
//#include "SCHED/extern.h"
//#include "defs.h"
//#include "extern.h"
#include "common_lib.h"
#include "PHY/NR_REFSIG/pss_nr.h"
#include "PHY/NR_REFSIG/sss_nr.h"
extern openair0_config_t openair0_cfg[];
//#define DEBUG_INITIAL_SYNCH
int pbch_detection(PHY_VARS_NR_UE *ue, runmode_t mode)
{
uint8_t l,pbch_decoded,frame_mod4,pbch_tx_ant,dummy;
NR_DL_FRAME_PARMS *frame_parms=&ue->frame_parms;
char phich_resource[6];
#ifdef DEBUG_INITIAL_SYNCH
LOG_I(PHY,"[UE%d] Initial sync: starting PBCH detection (rx_offset %d)\n",ue->Mod_id,
ue->rx_offset);
#endif
//symbol 1
slot_fep_pbch(ue,
1,
0,
ue->rx_offset,
0,
1);
//symbol 2
slot_fep_pbch(ue,
2,
0,
ue->rx_offset,
0,
1);
//symbol 3
slot_fep_pbch(ue,
3,
0,
ue->rx_offset,
0,
1);
pbch_decoded = 0;
//for (frame_mod4=0; frame_mod4<4; frame_mod4++) {
pbch_tx_ant = nr_rx_pbch(ue,
&ue->proc.proc_rxtx[0],
ue->pbch_vars[0],
frame_parms,
0,
SISO,
ue->high_speed_flag,
frame_mod4);
if ((pbch_tx_ant>0) && (pbch_tx_ant<=2)) {
pbch_decoded = 1;
// break;
}
//}
if (pbch_decoded) {
frame_parms->nb_antenna_ports_eNB = pbch_tx_ant;
// set initial transmission mode to 1 or 2 depending on number of detected TX antennas
//frame_parms->mode1_flag = (pbch_tx_ant==1);
// openair_daq_vars.dlsch_transmission_mode = (pbch_tx_ant>1) ? 2 : 1;
// flip byte endian on 24-bits for MIB
// dummy = ue->pbch_vars[0]->decoded_output[0];
// ue->pbch_vars[0]->decoded_output[0] = ue->pbch_vars[0]->decoded_output[2];
// ue->pbch_vars[0]->decoded_output[2] = dummy;
// now check for Bandwidth of Cell
dummy = (ue->pbch_vars[0]->decoded_output[2]>>5)&7;
switch (dummy) {
case 0 :
frame_parms->N_RB_DL = 6;
break;
case 1 :
frame_parms->N_RB_DL = 15;
break;
case 2 :
frame_parms->N_RB_DL = 25;
break;
case 3 :
frame_parms->N_RB_DL = 50;
break;
case 4 :
frame_parms->N_RB_DL = 75;
break;
case 5:
frame_parms->N_RB_DL = 100;
break;
default:
LOG_E(PHY,"[UE%d] Initial sync: PBCH decoding: Unknown N_RB_DL\n",ue->Mod_id);
return -1;
break;
}
for(int i=0; i<RX_NB_TH;i++)
{
ue->proc.proc_rxtx[i].frame_rx = (((ue->pbch_vars[0]->decoded_output[2]&3)<<6) + (ue->pbch_vars[0]->decoded_output[1]>>2))<<2;
ue->proc.proc_rxtx[i].frame_rx = (((ue->pbch_vars[0]->decoded_output[2]&3)<<6) + (ue->pbch_vars[0]->decoded_output[1]>>2))<<2;
#ifndef USER_MODE
// one frame delay
ue->proc.proc_rxtx[i].frame_rx ++;
#endif
ue->proc.proc_rxtx[i].frame_tx = ue->proc.proc_rxtx[0].frame_rx;
}
#ifdef DEBUG_INITIAL_SYNCH
LOG_I(PHY,"[UE%d] Initial sync: pbch decoded sucessfully mode1_flag %d, tx_ant %d, frame %d, N_RB_DL %d, phich_duration %d, phich_resource %s!\n",
ue->Mod_id,
frame_parms->mode1_flag,
pbch_tx_ant,
ue->proc.proc_rxtx[0].frame_rx,
frame_parms->N_RB_DL,
frame_parms->phich_config_common.phich_duration,
phich_resource); //frame_parms->phich_config_common.phich_resource);
#endif
return(0);
} else {
return(-1);
}
}
char phich_string[13][4] = {"","1/6","","1/2","","","one","","","","","","two"};
char duplex_string[2][4] = {"FDD","TDD"};
char prefix_string[2][9] = {"NORMAL","EXTENDED"};
int nr_initial_sync(PHY_VARS_NR_UE *ue, runmode_t mode)
{
int32_t sync_pos, sync_pos2, k_ssb, N_ssb_crb;
int32_t metric_fdd_ncp=0;
uint8_t phase_fdd_ncp;
NR_DL_FRAME_PARMS *frame_parms = &ue->frame_parms;
int ret=-1;
int aarx,rx_power=0;
/*offset parameters to be updated from higher layer */
k_ssb =0;
N_ssb_crb = 0;
/*#ifdef OAI_USRP
__m128i *rxdata128;
#endif*/
// LOG_I(PHY,"**************************************************************\n");
// First try FDD normal prefix
frame_parms->Ncp=NORMAL;
frame_parms->frame_type=FDD;
init_frame_parms(frame_parms,1);
/*
write_output("rxdata0.m","rxd0",ue->common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
exit(-1);
*/
/* Initial synchronisation
*
* 1 radio frame = 10 ms
* <--------------------------------------------------------------------------->
* -----------------------------------------------------------------------------
* | Received UE data buffer |
* ----------------------------------------------------------------------------
* --------------------------
* <-------------->| pss | pbch | sss | pbch |
* --------------------------
* sync_pos SS/PBCH block
*/
/* process pss search on received buffer */
sync_pos = pss_synchro_nr(ue, NO_RATE_CHANGE);
/* offset is used by sss serach as it is returned from pss search */
ue->rx_offset = sync_pos;
// write_output("rxdata1.m","rxd1",ue->common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
#ifdef DEBUG_INITIAL_SYNCH
LOG_I(PHY,"[UE%d] Initial sync : Estimated PSS position %d, Nid2 %d\n", ue->Mod_id, sync_pos,ue->common_vars.eNb_id);
#endif
/* check that SSS/PBCH block is continuous inside the received buffer */
if (sync_pos < (LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*frame_parms->ttis_per_subframe*frame_parms->samples_per_tti - (NB_SYMBOLS_PBCH * frame_parms->ofdm_symbol_size))) {
#ifdef DEBUG_INITIAL_SYNCH
LOG_I(PHY,"Calling sss detection (normal CP)\n");
#endif
rx_sss_nr(ue,&metric_fdd_ncp,&phase_fdd_ncp);
init_frame_parms(&ue->frame_parms,1);
//generate_dmrs_pbch(ue->dmrs_pbch_bitmap_nr, frame_parms->Nid_cell);
ret = pbch_detection(ue,mode);
// write_output("rxdata2.m","rxd2",ue->common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
#ifdef DEBUG_INITIAL_SYNCH
LOG_I(PHY,"FDD Normal prefix: CellId %d metric %d, phase %d, flip %d, pbch %d\n",
frame_parms->Nid_cell,metric_fdd_ncp,phase_fdd_ncp,flip_fdd_ncp,ret);
#endif
}
else {
#ifdef DEBUG_INITIAL_SYNCH
LOG_I(PHY,"FDD Normal prefix: SSS error condition: sync_pos %d, sync_pos_slot %d\n", sync_pos, sync_pos_slot);
#endif
}
/* Consider this is a false detection if the offset is > 1000 Hz */
if( (abs(ue->common_vars.freq_offset) > 150) && (ret == 0) )
{
ret=-1;
#if DISABLE_LOG_X
printf("Ignore MIB with high freq offset [%d Hz] estimation \n",ue->common_vars.freq_offset);
#else
LOG_E(HW, "Ignore MIB with high freq offset [%d Hz] estimation \n",ue->common_vars.freq_offset);
#endif
}
if (ret==0) { // PBCH found so indicate sync to higher layers and configure frame parameters
//#ifdef DEBUG_INITIAL_SYNCH
#if DISABLE_LOG_X
printf("[UE%d] In synch, rx_offset %d samples\n",ue->Mod_id, ue->rx_offset);
#else
LOG_I(PHY, "[UE%d] In synch, rx_offset %d samples\n",ue->Mod_id, ue->rx_offset);
#endif
//#endif
if (ue->UE_scan_carrier == 0) {
#if UE_AUTOTEST_TRACE
LOG_I(PHY,"[UE %d] AUTOTEST Cell Sync : frame = %d, rx_offset %d, freq_offset %d \n",
ue->Mod_id,
ue->proc.proc_rxtx[0].frame_rx,
ue->rx_offset,
ue->common_vars.freq_offset );
#endif
// send sync status to higher layers later when timing offset converge to target timing
#if OAISIM
if (ue->mac_enabled==1) {
LOG_I(PHY,"[UE%d] Sending synch status to higher layers\n",ue->Mod_id);
//mac_resynch();
mac_xface->dl_phy_sync_success(ue->Mod_id,ue->proc.proc_rxtx[0].frame_rx,0,1);//ue->common_vars.eNb_id);
ue->UE_mode[0] = PRACH;
}
else {
ue->UE_mode[0] = PUSCH;
}
#endif
generate_pcfich_reg_mapping(frame_parms);
generate_phich_reg_mapping(frame_parms);
ue->pbch_vars[0]->pdu_errors_conseq=0;
}
#if DISABLE_LOG_X
printf("[UE %d] Frame %d RRC Measurements => rssi %3.1f dBm (dig %3.1f dB, gain %d), N0 %d dBm, rsrp %3.1f dBm/RE, rsrq %3.1f dB\n",ue->Mod_id,
ue->proc.proc_rxtx[0].frame_rx,
10*log10(ue->measurements.rssi)-ue->rx_total_gain_dB,
10*log10(ue->measurements.rssi),
ue->rx_total_gain_dB,
ue->measurements.n0_power_tot_dBm,
10*log10(ue->measurements.rsrp[0])-ue->rx_total_gain_dB,
(10*log10(ue->measurements.rsrq[0])));
printf("[UE %d] Frame %d MIB Information => %s, %s, NidCell %d, N_RB_DL %d, PHICH DURATION %d, PHICH RESOURCE %s, TX_ANT %d\n",
ue->Mod_id,
ue->proc.proc_rxtx[0].frame_rx,
duplex_string[ue->frame_parms.frame_type],
prefix_string[ue->frame_parms.Ncp],
ue->frame_parms.Nid_cell,
ue->frame_parms.N_RB_DL,
ue->frame_parms.phich_config_common.phich_duration,
phich_string[ue->frame_parms.phich_config_common.phich_resource],
ue->frame_parms.nb_antenna_ports_eNB);
#else
LOG_I(PHY, "[UE %d] Frame %d RRC Measurements => rssi %3.1f dBm (dig %3.1f dB, gain %d), N0 %d dBm, rsrp %3.1f dBm/RE, rsrq %3.1f dB\n",ue->Mod_id,
ue->proc.proc_rxtx[0].frame_rx,
10*log10(ue->measurements.rssi)-ue->rx_total_gain_dB,
10*log10(ue->measurements.rssi),
ue->rx_total_gain_dB,
ue->measurements.n0_power_tot_dBm,
10*log10(ue->measurements.rsrp[0])-ue->rx_total_gain_dB,
(10*log10(ue->measurements.rsrq[0])));
/* LOG_I(PHY, "[UE %d] Frame %d MIB Information => %s, %s, NidCell %d, N_RB_DL %d, PHICH DURATION %d, PHICH RESOURCE %s, TX_ANT %d\n",
ue->Mod_id,
ue->proc.proc_rxtx[0].frame_rx,
duplex_string[ue->frame_parms.frame_type],
prefix_string[ue->frame_parms.Ncp],
ue->frame_parms.Nid_cell,
ue->frame_parms.N_RB_DL,
ue->frame_parms.phich_config_common.phich_duration,
phich_string[ue->frame_parms.phich_config_common.phich_resource],
ue->frame_parms.nb_antenna_ports_eNB);*/
#endif
#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) || defined(OAI_ADRV9371_ZC706)
# if DISABLE_LOG_X
printf("[UE %d] Frame %d Measured Carrier Frequency %.0f Hz (offset %d Hz)\n",
ue->Mod_id,
ue->proc.proc_rxtx[0].frame_rx,
openair0_cfg[0].rx_freq[0]-ue->common_vars.freq_offset,
ue->common_vars.freq_offset);
# else
LOG_I(PHY, "[UE %d] Frame %d Measured Carrier Frequency %.0f Hz (offset %d Hz)\n",
ue->Mod_id,
ue->proc.proc_rxtx[0].frame_rx,
openair0_cfg[0].rx_freq[0]-ue->common_vars.freq_offset,
ue->common_vars.freq_offset);
# endif
#endif
} else {
#ifdef DEBUG_INITIAL_SYNC
LOG_I(PHY,"[UE%d] Initial sync : PBCH not ok\n",ue->Mod_id);
LOG_I(PHY,"[UE%d] Initial sync : Estimated PSS position %d, Nid2 %d\n",ue->Mod_id,sync_pos,ue->common_vars.eNb_id);
/* LOG_I(PHY,"[UE%d] Initial sync: (metric fdd_ncp %d (%d), metric fdd_ecp %d (%d), metric_tdd_ncp %d (%d), metric_tdd_ecp %d (%d))\n",
ue->Mod_id,
metric_fdd_ncp,Nid_cell_fdd_ncp,
metric_fdd_ecp,Nid_cell_fdd_ecp,
metric_tdd_ncp,Nid_cell_tdd_ncp,
metric_tdd_ecp,Nid_cell_tdd_ecp);*/
LOG_I(PHY,"[UE%d] Initial sync : Estimated Nid_cell %d, Frame_type %d\n",ue->Mod_id,
frame_parms->Nid_cell,frame_parms->frame_type);
#endif
ue->UE_mode[0] = NOT_SYNCHED;
ue->pbch_vars[0]->pdu_errors_last=ue->pbch_vars[0]->pdu_errors;
ue->pbch_vars[0]->pdu_errors++;
ue->pbch_vars[0]->pdu_errors_conseq++;
}
// gain control
if (ret!=0) { //we are not synched, so we cannot use rssi measurement (which is based on channel estimates)
rx_power = 0;
// do a measurement on the best guess of the PSS
for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
rx_power += signal_energy(&ue->common_vars.rxdata[aarx][sync_pos2],
frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
/*
// do a measurement on the full frame
for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
rx_power += signal_energy(&ue->common_vars.rxdata[aarx][0],
frame_parms->samples_per_subframe*10);
*/
// we might add a low-pass filter here later
ue->measurements.rx_power_avg[0] = rx_power/frame_parms->nb_antennas_rx;
ue->measurements.rx_power_avg_dB[0] = dB_fixed(ue->measurements.rx_power_avg[0]);
#ifdef DEBUG_INITIAL_SYNCH
LOG_I(PHY,"[UE%d] Initial sync : Estimated power: %d dB\n",ue->Mod_id,ue->measurements.rx_power_avg_dB[0] );
#endif
#ifndef OAI_USRP
#ifndef OAI_BLADERF
#ifndef OAI_LMSSDR
#ifndef OAI_ADRV9371_ZC706
phy_adjust_gain(ue,ue->measurements.rx_power_avg_dB[0],0);
#endif
#endif
#endif
#endif
}
else {
#ifndef OAI_USRP
#ifndef OAI_BLADERF
#ifndef OAI_LMSSDR
#ifndef OAI_ADRV9371_ZC706
phy_adjust_gain(ue,dB_fixed(ue->measurements.rssi),0);
#endif
#endif
#endif
#endif
}
// exit_fun("debug exit");
return ret;
}
This diff is collapsed.
......@@ -142,6 +142,8 @@ typedef struct NR_DL_FRAME_PARMS {
uint8_t nb_antenna_ports_eNB;
/// Cyclic Prefix for DL (0=Normal CP, 1=Extended CP)
lte_prefix_type_t Ncp;
/// shift of pilot position in one RB
uint8_t nushift;
/// SRS configuration from TS 38.331 RRC
SRS_NR srs_nr;
......
......@@ -354,7 +354,7 @@ static void *UE_thread_synch(void *arg) {
#else
LOG_I(PHY, "[UE thread Synch] Running Initial Synch (mode %d)\n",UE->mode);
#endif
if (initial_sync( UE, UE->mode ) == 0) {
if (nr_initial_sync( UE, UE->mode ) == 0) {
hw_slot_offset = (UE->rx_offset<<1) / UE->frame_parms.samples_per_tti;
printf("Got synch: hw_slot_offset %d, carrier off %d Hz, rxgain %d (DL %u, UL %u), UE_scan_carrier %d\n",
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment