Commit d3eebd06 authored by Rohit Gupta's avatar Rohit Gupta

removed pre-compiled exmimo files as they don't work for different kernel versions

parent 5f7e9976
n=oarf_get_num_detected_cards;
for i=n-1:0
oarf_stop(i);
end
#!/bin/bash
################################################################################
# OpenAirInterface
# Copyright(c) 1999 - 2015 Eurecom
#
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
#
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
#
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
#
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
#
################################################################################
# file init_nas_nos1
# brief loads the nasmesh module and sets up the radio bearers (used to provide ip interface without S1 interface)
# author Florian Kaltenberger
#
#######################################
load_module()
{
mod_name=${1##*/}
mod_name=${mod_name%.*}
if awk "/$mod_name/ {found=1 ;exit} END {if (found!=1) exit 1}" /proc/modules
then
echo "module $mod_name already loaded: I remove it first"
sudo rmmod $mod_name
fi
echo loading $mod_name
sudo insmod $1
}
function main()
{
PCI=`lspci -m | grep Xilinx`
if [ -z "$PCI" ]; then
echo "No card found. Stopping!"
return
fi
## This part corrects the wrong configuration of the endpoint done by the bios in some machines
echo "$PCI" | while read config_reg; do
SLOT_NUMBER=`echo $config_reg | awk -F\" '{print $1}'`
sudo setpci -s $SLOT_NUMBER 60.b=10
done
load_module $OPENAIR_DIR/targets/bin/openair_rf.ko
sleep 1
if [ ! -e /dev/openair0 ]; then
sudo mknod /dev/openair0 c 127 0
sudo chmod a+rw /dev/openair0
fi
DEVICE=`echo $PCI | awk -F\" '{print $(NF-1)}' | awk '{print $2}'`
DEVICE_SWID=${DEVICE:2:2}
if [ $DEVICE_SWID == '0a' ]; then
echo "Using firware version 10"
$OPENAIR_DIR/targets/bin/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10
else
echo 'No corresponding firmware found'
return
fi
}
main "$@"
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment