Commit d7ab6af3 authored by nikaeinn's avatar nikaeinn
Browse files

* EPC config file for sequence

* EPC condif file for centos on ubuntu
* minor adjustments for logs 


git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5417 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 0a8e6360
......@@ -1425,7 +1425,7 @@ void phy_procedures_eNB_TX(unsigned char next_slot,PHY_VARS_eNB *phy_vars_eNB,ui
DCI_pdu->nCCE = get_nCCE(num_pdcch_symbols,
&phy_vars_eNB->lte_frame_parms,
get_mi(&phy_vars_eNB->lte_frame_parms,next_slot>>1));
LOG_D(PHY,"num_pdcch_symbols %d, nCCE %d\n",num_pdcch_symbols,DCI_pdu->nCCE);
LOG_T(PHY,"num_pdcch_symbols %d, nCCE %d\n",num_pdcch_symbols,DCI_pdu->nCCE);
#if defined(SMBV) && !defined(EXMIMO)
// Sets up PDCCH and DCI table
......@@ -1468,7 +1468,7 @@ void phy_procedures_eNB_TX(unsigned char next_slot,PHY_VARS_eNB *phy_vars_eNB,ui
LOG_E(PHY,"[eNB %d] Frame %d subframe %d : No available CCE resources for common DCI (SI)!!!\n",phy_vars_eNB->Mod_id,phy_vars_eNB->frame,next_slot>>1);
}
else {
LOG_D(PHY,"[eNB %d] Frame %d subframe %d : CCE resource for common DCI (SI) => %d/%d\n",phy_vars_eNB->Mod_id,phy_vars_eNB->frame,next_slot>>1,
LOG_T(PHY,"[eNB %d] Frame %d subframe %d : CCE resource for common DCI (SI) => %d/%d\n",phy_vars_eNB->Mod_id,phy_vars_eNB->frame,next_slot>>1,
phy_vars_eNB->dlsch_eNB_SI->nCCE[next_slot>>1],DCI_pdu->nCCE);
#if defined(SMBV) && !defined(EXMIMO)
......@@ -1653,7 +1653,7 @@ void phy_procedures_eNB_TX(unsigned char next_slot,PHY_VARS_eNB *phy_vars_eNB,ui
phy_vars_eNB->Mod_id,phy_vars_eNB->frame,next_slot>>1,DCI_pdu->nCCE,DCI_pdu->dci_alloc[i].rnti);
}
else {
LOG_D(PHY,"[eNB %d] Frame %d subframe %d : CCE resources for UE spec DCI (PUSCH %x) => %d/%d\n",
LOG_T(PHY,"[eNB %d] Frame %d subframe %d : CCE resources for UE spec DCI (PUSCH %x) => %d/%d\n",
phy_vars_eNB->Mod_id,phy_vars_eNB->frame,next_slot>>1,DCI_pdu->dci_alloc[i].rnti,
DCI_pdu->dci_alloc[i].nCCE,DCI_pdu->nCCE);
......
......@@ -2714,7 +2714,7 @@ uint32_t allocate_prbs_sub(int nb_rb, uint8_t *rballoc) {
uint32_t rballoc_dci=0;
//uint8_t number_of_subbands=13;
LOG_D(MAC,"*****Check1RBALLOC****: %d%d%d%d (nb_rb %d,N_RBGS %d)\n",
LOG_T(MAC,"*****Check1RBALLOC****: %d%d%d%d (nb_rb %d,N_RBGS %d)\n",
rballoc[3],rballoc[2],rballoc[1],rballoc[0],nb_rb,mac_xface->lte_frame_parms->N_RBGS);
while((nb_rb >0) && (check < mac_xface->lte_frame_parms->N_RBGS)){
//printf("rballoc[%d] %d\n",check,rballoc[check]);
......@@ -2745,7 +2745,7 @@ uint32_t allocate_prbs_sub(int nb_rb, uint8_t *rballoc) {
// check1 = check1+2;
}
// rballoc_dci = (rballoc_dci)&(0x1fff);
LOG_D(MAC,"*********RBALLOC : %x\n",rballoc_dci);
LOG_T(MAC,"*********RBALLOC : %x\n",rballoc_dci);
// exit(-1);
return (rballoc_dci);
}
......
/*________________________MAC/extern.h________________________
Authors : Hicham Anouar, Raymond Knopp
Company : EURECOM
Emails : anouar@eurecom.fr, knopp@eurecom.fr
________________________________________________________________*/
/*******************************************************************************
Eurecom OpenAirInterface
Copyright(c) 1999 - 2013 Eurecom
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information
Openair Admin: openair_admin@eurecom.fr
Openair Tech : openair_tech@eurecom.fr
Forums : http://forums.eurecom.fsr/openairinterface
Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France
*******************************************************************************/
/*! \file extern.h
* \brief mac externs
* \author Raymond Knopp, Navid Nikaein
* \date 2012
* \version 1.0
* \email navid.nikaein@eurecom.fr
* @ingroup _mac
*/
#ifndef __MAC_EXTERN_H__
#define __MAC_EXTERN_H__
......
......@@ -183,7 +183,7 @@ int mac_top_init(int eMBMS_active, uint8_t cba_group_active, uint8_t HO_active){
#endif
#endif
init_transport_channels(2);
//init_transport_channels(2);
// Set up DCIs for TDD 5MHz Config 1..6
......
......@@ -752,15 +752,15 @@ void dlsch_scheduler_pre_processor (module_id_t Mod_id,
for(UE_id=0;UE_id<granted_UEs;UE_id++){
//PHY_vars_eNB_g[Mod_id]->mu_mimo_mode[UE_id].dl_pow_off = dl_pow_off[UE_id];
LOG_D(PHY,"******************Scheduling Information for UE%d ************************\n",UE_id);
LOG_D(PHY,"dl power offset UE%d = %d \n",UE_id,dl_pow_off[UE_id]);
LOG_D(PHY,"***********RB Alloc for every subband for UE%d ***********\n",UE_id);
LOG_D(MAC,"******************Scheduling Information for UE%d ************************\n",UE_id);
LOG_D(MAC,"dl power offset UE%d = %d \n",UE_id,dl_pow_off[UE_id]);
LOG_D(MAC,"***********RB Alloc for every subband for UE%d ***********\n",UE_id);
for(j=0;j<N_RBGS;j++){
//PHY_vars_eNB_g[Mod_id]->mu_mimo_mode[UE_id].rballoc_sub[i] = rballoc_sub_UE[UE_id][i];
LOG_D(PHY,"RB Alloc for UE%d and Subband%d = %d\n",UE_id,j,rballoc_sub_UE[UE_id][j]);
LOG_D(MAC,"RB Alloc for UE%d and Subband%d = %d\n",UE_id,j,rballoc_sub_UE[UE_id][j]);
}
//PHY_vars_eNB_g[Mod_id]->mu_mimo_mode[UE_id].pre_nb_available_rbs = pre_nb_available_rbs[UE_id];
LOG_D(PHY,"Total RBs allocated for UE%d = %d\n",UE_id,pre_nb_available_rbs[UE_id]);
LOG_D(MAC,"Total RBs allocated for UE%d = %d\n",UE_id,pre_nb_available_rbs[UE_id]);
}
}
......@@ -425,7 +425,7 @@ mac_rlc_status_resp_t mac_rlc_status_ind(
} else {
rlc_mode = RLC_MODE_NONE;
//LOG_W(RLC , "[%s] RLC not configured rb id %u lcid %u module %u!\n", __FUNCTION__, rb_id, channel_idP, ue_module_idP);
LOG_D(RLC , "[%s] RLC not configured rb id %u lcid %u module %u!\n", __FUNCTION__, rb_id, channel_idP, ue_module_idP);
//LOG_D(RLC , "[%s] RLC not configured rb id %u lcid %u module %u!\n", __FUNCTION__, rb_id, channel_idP, ue_module_idP);
}
switch (rlc_mode) {
......
......@@ -58,7 +58,7 @@ extern UE_MAC_INST *UE_mac_inst;
#endif
//#define RRC_DATA_REQ_DEBUG
#define DEBUG_RRC
//#define DEBUG_RRC
mui_t mui=0;
......
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "15";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Channel parameters:
// Default Paging DRX of the eNB as defined in TS 36.304
default_paging_drx = "PAGING_DRX_256";
////////// Physical parameters:
frame_type = "FDD";
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.14.11";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.14.10/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.14.10/24";
};
}
);
//Active_eNBs = ( "eNB_Eurecom_0", "eNB_Eurecom_1", "eNB_Eurecom_2", "eNB_Eurecom_3");
Active_eNBs = ( "eNB_Eurecom_0");
Asn1_verbosity = "none";
eNBs =
(
......@@ -28,18 +29,24 @@ eNBs =
eutra_band = 4;
downlink_frequency = 2120000000;
uplink_frequency_offset = -400000000;
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.31";
ipv6 = "2192:168:30::17";
mme_ip_address = ( { ipv4 = "192.168.13.11";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
},
{ ipv4 = "192.168.12.86";
ipv6 = "2192:168:30::18";
active = "no";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24";
};
}
);
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment